! Started logfile: J0750+5015_X_2017_02_24_pus_uvs.log on Sat May  4 09:59:51 2019
obs J0750+5015_X_2017_02_24_pus_uva.fits
! Reading UV FITS file: J0750+5015_X_2017_02_24_pus_uva.fits
! AN table 1: 218 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.858818 visibilities/baseline/integration-bin.
! Found source: J0750+5015
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 1882 lines of history.
! 
! Reading 101100 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J0750+5015_X_2017_02_24_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 165 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 165 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 165 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 165 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 165 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 165 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 165 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 165 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 165 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 165 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 195 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 195 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.960453Jy  sigma=0.008280
! Fit after  self-cal, rms=0.946087Jy  sigma=0.008168
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7857 mas, bmaj=1.407 mas, bpa=24.33 degrees
! Estimated noise=668.586 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0414633 Jy
! Component: 100  -  total flux cleaned = 0.0528107 Jy
! Total flux subtracted in 100 components = 0.0528107 Jy
! Clean residual min=-0.002890 max=0.006445 Jy/beam
! Clean residual mean=-0.000035 rms=0.000815 Jy/beam
! Combined flux in latest and established models = 0.0528107 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0528107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081316Jy  sigma=0.000671
! Fit after  self-cal, rms=0.081123Jy  sigma=0.000669
! Inverting map 
! Added new window around map position (3.2, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00723386 Jy
! Component: 100  -  total flux cleaned = 0.0121394 Jy
! Total flux subtracted in 100 components = 0.0121394 Jy
! Clean residual min=-0.002281 max=0.004673 Jy/beam
! Clean residual mean=-0.000025 rms=0.000640 Jy/beam
! Combined flux in latest and established models = 0.0649501 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 19 components and 0.0649501 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080061Jy  sigma=0.000659
! Fit after  self-cal, rms=0.080001Jy  sigma=0.000658
! Inverting map 
! Added new window around map position (1.4, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0053852 Jy
! Component: 100  -  total flux cleaned = 0.00892006 Jy
! Total flux subtracted in 100 components = 0.00892006 Jy
! Clean residual min=-0.001931 max=0.002426 Jy/beam
! Clean residual mean=-0.000018 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.0738702 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 35 components and 0.0738702 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079394Jy  sigma=0.000652
! Fit after  self-cal, rms=0.079343Jy  sigma=0.000652
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00371725 Jy
! Component: 100  -  total flux cleaned = 0.00623038 Jy
! Total flux subtracted in 100 components = 0.00623038 Jy
! Clean residual min=-0.001767 max=0.001948 Jy/beam
! Clean residual mean=-0.000013 rms=0.000486 Jy/beam
! Combined flux in latest and established models = 0.0801006 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 43 components and 0.0801006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079041Jy  sigma=0.000649
! Fit after  self-cal, rms=0.079018Jy  sigma=0.000648
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1 mas, bmaj=1.619 mas, bpa=21.22 degrees
! Estimated noise=261.118 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00448542 Jy
! Component: 100  -  total flux cleaned = 0.00723513 Jy
! Component: 150  -  total flux cleaned = 0.00914182 Jy
! Component: 200  -  total flux cleaned = 0.0105066 Jy
! Total flux subtracted in 200 components = 0.0105066 Jy
! Clean residual min=-0.001187 max=0.001936 Jy/beam
! Clean residual mean=-0.000010 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.0906072 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 68 components and 0.0906072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078746Jy  sigma=0.000646
! Fit after  self-cal, rms=0.078704Jy  sigma=0.000645
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00201795 Jy
! Component: 100  -  total flux cleaned = 0.00317995 Jy
! Component: 150  -  total flux cleaned = 0.00378734 Jy
! Component: 200  -  total flux cleaned = 0.00407769 Jy
! Total flux subtracted in 200 components = 0.00407769 Jy
! Clean residual min=-0.001176 max=0.001567 Jy/beam
! Clean residual mean=-0.000003 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.0946848 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 82 components and 0.0946848 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078653Jy  sigma=0.000645
! Fit after  self-cal, rms=0.078644Jy  sigma=0.000645
! Inverting map 
! Added new window around map position (5.2, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.001607 Jy
! Component: 100  -  total flux cleaned = 0.00209974 Jy
! Component: 150  -  total flux cleaned = 0.00242299 Jy
! Component: 200  -  total flux cleaned = 0.00254157 Jy
! Total flux subtracted in 200 components = 0.00254157 Jy
! Clean residual min=-0.001020 max=0.001072 Jy/beam
! Clean residual mean=-0.000001 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.0972264 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 104 components and 0.0972264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078609Jy  sigma=0.000644
! Fit after  self-cal, rms=0.078595Jy  sigma=0.000644
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.02     HN        1.15     KP        1.00     
!   LA        1.02     MK        0.94     NL        0.99     OV        1.02     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.00     KP        0.99     
!   LA        1.03     MK        1.00     NL        1.04     OV        0.97     
!   PT        1.03     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.13     KP        0.97     
!   LA        0.98     MK        1.05     NL        1.01     OV        1.01     
!   PT        1.05     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.17     KP        0.99     
!   LA        0.96     MK        1.05     NL        1.00     OV        1.01     
!   PT        0.99     SC        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.01     HN        0.97     KP        1.02     
!   LA        1.01     MK        1.05     NL        0.97     OV        0.99     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.01     KP        0.99     
!   LA        1.06     MK        1.06     NL        0.98     OV        0.97     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        1.13     KP        0.96     
!   LA        1.04     MK        1.00     NL        0.99     OV        1.01     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.96     HN        1.02     KP        0.98     
!   LA        1.05     MK        0.99     NL        0.99     OV        1.02     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        0.97     KP        1.01     
!   LA        0.99     MK        0.97     NL        0.96     OV        1.03     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.91     KP        0.99     
!   LA        1.00     MK        0.95     NL        1.02     OV        0.99     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.06     HN        0.86     KP        0.96     
!   LA        1.00     MK        0.98     NL        0.98     OV        0.96     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        0.92     KP        1.00     
!   LA        1.03     MK        0.86     NL        0.90     OV        1.01     
!   PT        0.98     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.078595Jy  sigma=0.000644
! Fit after  self-cal, rms=0.078313Jy  sigma=0.000643
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=1.621 mas, bpa=21.24 degrees
! Estimated noise=262.02 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000998374 Jy
! Component: 100  -  total flux cleaned = 0.00135562 Jy
! Component: 150  -  total flux cleaned = 0.00142158 Jy
! Component: 200  -  total flux cleaned = 0.00147866 Jy
! Total flux subtracted in 200 components = 0.00147866 Jy
! Clean residual min=-0.000905 max=0.000884 Jy/beam
! Clean residual mean=-0.000001 rms=0.000235 Jy/beam
! Combined flux in latest and established models = 0.0987051 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 114 components and 0.0987051 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078297Jy  sigma=0.000643
! Fit after  self-cal, rms=0.078296Jy  sigma=0.000643
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078296Jy  sigma=0.000643
! Fit after  self-cal, rms=0.078985Jy  sigma=0.000642
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=1.624 mas, bpa=20.86 degrees
! Estimated noise=261.974 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000614862 Jy
! Component: 100  -  total flux cleaned = 0.000684215 Jy
! Component: 150  -  total flux cleaned = 0.000743565 Jy
! Component: 200  -  total flux cleaned = 0.000779675 Jy
! Total flux subtracted in 200 components = 0.000779675 Jy
! Clean residual min=-0.000791 max=0.000918 Jy/beam
! Clean residual mean=-0.000001 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.0994847 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 136 components and 0.0994847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078974Jy  sigma=0.000642
! Fit after  self-cal, rms=0.079002Jy  sigma=0.000642
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000240781 Jy
! Component: 100  -  total flux cleaned = 0.0002791 Jy
! Component: 150  -  total flux cleaned = 0.000309876 Jy
! Component: 200  -  total flux cleaned = 0.000322815 Jy
! Total flux subtracted in 200 components = 0.000322815 Jy
! Clean residual min=-0.000776 max=0.000795 Jy/beam
! Clean residual mean=-0.000000 rms=0.000198 Jy/beam
! Combined flux in latest and established models = 0.0998075 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 141 components and 0.0998075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078996Jy  sigma=0.000642
! Fit after  self-cal, rms=0.078995Jy  sigma=0.000642
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078995Jy  sigma=0.000642
! Fit after  self-cal, rms=0.079189Jy  sigma=0.000642
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.002 mas, bmaj=1.626 mas, bpa=20.61 degrees
! Estimated noise=261.574 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000343827 Jy
! Component: 100  -  total flux cleaned = 0.000433429 Jy
! Component: 150  -  total flux cleaned = 0.000495375 Jy
! Component: 200  -  total flux cleaned = 0.00053548 Jy
! Total flux subtracted in 200 components = 0.00053548 Jy
! Clean residual min=-0.000750 max=0.000776 Jy/beam
! Clean residual mean=-0.000001 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.100343 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 144 components and 0.100343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079182Jy  sigma=0.000642
! Fit after  self-cal, rms=0.079189Jy  sigma=0.000642
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000120758 Jy
! Component: 100  -  total flux cleaned = 0.000190656 Jy
! Component: 150  -  total flux cleaned = 0.000202131 Jy
! Component: 200  -  total flux cleaned = 0.000213007 Jy
! Total flux subtracted in 200 components = 0.000213007 Jy
! Clean residual min=-0.000748 max=0.000729 Jy/beam
! Clean residual mean=-0.000001 rms=0.000187 Jy/beam
! Combined flux in latest and established models = 0.100556 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 148 components and 0.100556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079185Jy  sigma=0.000642
! Fit after  self-cal, rms=0.079184Jy  sigma=0.000642
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079184Jy  sigma=0.000642
! Fit after  self-cal, rms=0.079104Jy  sigma=0.000642
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.216 mas, bmaj=2.407 mas, bpa=23.66 degrees
! Estimated noise=324.437 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00017409 Jy
! Component: 100  -  total flux cleaned = 0.000221777 Jy
! Component: 150  -  total flux cleaned = 0.000247426 Jy
! Component: 200  -  total flux cleaned = 0.000267799 Jy
! Total flux subtracted in 200 components = 0.000267799 Jy
! Clean residual min=-0.000819 max=0.000855 Jy/beam
! Clean residual mean=-0.000002 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.100824 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 167 components and 0.100824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079101Jy  sigma=0.000642
! Fit after  self-cal, rms=0.079101Jy  sigma=0.000642
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.78759e-05 Jy
! Component: 100  -  total flux cleaned = 5.82438e-05 Jy
! Component: 150  -  total flux cleaned = 4.9793e-05 Jy
! Component: 200  -  total flux cleaned = 4.1827e-05 Jy
! Total flux subtracted in 200 components = 4.1827e-05 Jy
! Clean residual min=-0.000824 max=0.000842 Jy/beam
! Clean residual mean=-0.000002 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.100866 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 173 components and 0.100866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079099Jy  sigma=0.000642
! Fit after  self-cal, rms=0.079098Jy  sigma=0.000642
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=1.628 mas, bpa=20.39 degrees
! Estimated noise=261.11 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.001 x 1.628 at 20.39 degrees (North through East)
! Clean map  min=-0.00080369  max=0.051572 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7851 mas, bmaj=1.417 mas, bpa=23.35 degrees
! Estimated noise=666.291 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.040049 Jy
! Component: 100  -  total flux cleaned = 0.055574 Jy
! Component: 150  -  total flux cleaned = 0.065486 Jy
! Component: 200  -  total flux cleaned = 0.0723516 Jy
! Total flux subtracted in 200 components = 0.0723516 Jy
! Clean residual min=-0.002108 max=0.003935 Jy/beam
! Clean residual mean=-0.000020 rms=0.000619 Jy/beam
! Combined flux in latest and established models = 0.0723516 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.0723516 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=1.628 mas, bpa=20.39 degrees
! Estimated noise=261.11 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00817036 Jy
! Component: 100  -  total flux cleaned = 0.0135983 Jy
! Component: 150  -  total flux cleaned = 0.0175336 Jy
! Component: 200  -  total flux cleaned = 0.0204405 Jy
! Total flux subtracted in 200 components = 0.0204405 Jy
! Clean residual min=-0.001191 max=0.001680 Jy/beam
! Clean residual mean=-0.000013 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.0927922 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 49 components and 0.0927922 Jy
! Inverting map 
! Added new window around map position (3, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00219648 Jy
! Component: 100  -  total flux cleaned = 0.00387948 Jy
! Component: 150  -  total flux cleaned = 0.00519037 Jy
! Component: 200  -  total flux cleaned = 0.00614413 Jy
! Total flux subtracted in 200 components = 0.00614413 Jy
! Clean residual min=-0.000860 max=0.000777 Jy/beam
! Clean residual mean=-0.000004 rms=0.000219 Jy/beam
! Combined flux in latest and established models = 0.0989363 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 82 components and 0.0989363 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.216 mas, bmaj=2.407 mas, bpa=23.66 degrees
! Estimated noise=324.437 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000931039 Jy
! Component: 100  -  total flux cleaned = 0.00136014 Jy
! Component: 150  -  total flux cleaned = 0.00167274 Jy
! Component: 200  -  total flux cleaned = 0.00190549 Jy
! Total flux subtracted in 200 components = 0.00190549 Jy
! Clean residual min=-0.000824 max=0.000849 Jy/beam
! Clean residual mean=-0.000002 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.100842 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.22516e-05 Jy
! Component: 100  -  total flux cleaned = 2.0018e-05 Jy
! Component: 150  -  total flux cleaned = 8.40509e-06 Jy
! Component: 200  -  total flux cleaned = -2.49687e-06 Jy
! Total flux subtracted in 200 components = -2.49687e-06 Jy
! Clean residual min=-0.000792 max=0.000860 Jy/beam
! Clean residual mean=-0.000002 rms=0.000226 Jy/beam
! Combined flux in latest and established models = 0.100839 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 130 components and 0.100839 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=1.628 mas, bpa=20.39 degrees
! Estimated noise=261.11 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.44559e-05 Jy
! Component: 100  -  total flux cleaned = 7.19576e-05 Jy
! Component: 150  -  total flux cleaned = 8.70011e-05 Jy
! Component: 200  -  total flux cleaned = 0.000113691 Jy
! Total flux subtracted in 200 components = 0.000113691 Jy
! Clean residual min=-0.000749 max=0.000719 Jy/beam
! Clean residual mean=-0.000001 rms=0.000184 Jy/beam
! Combined flux in latest and established models = 0.100953 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 139 components and 0.100953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079101Jy  sigma=0.000642
! Fit after  self-cal, rms=0.079096Jy  sigma=0.000642
wmodel J0750+5015_X_2017_02_24_pus_map.mod
! Writing 139 model components to file: J0750+5015_X_2017_02_24_pus_map.mod
wobs J0750+5015_X_2017_02_24_pus_uvs.fits
! Writing UV FITS file: J0750+5015_X_2017_02_24_pus_uvs.fits
wwins J0750+5015_X_2017_02_24_pus_map.win
! wwins: Wrote 5 windows to J0750+5015_X_2017_02_24_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000147852 Jy
! Component: 100  -  total flux cleaned = -0.000209146 Jy
! Component: 150  -  total flux cleaned = -0.000197774 Jy
! Component: 200  -  total flux cleaned = -0.000219644 Jy
! Component: 250  -  total flux cleaned = -0.0002408 Jy
! Component: 300  -  total flux cleaned = -0.000261005 Jy
! Component: 350  -  total flux cleaned = -0.000270642 Jy
! Component: 400  -  total flux cleaned = -0.00028971 Jy
! Component: 450  -  total flux cleaned = -0.000308276 Jy
! Component: 500  -  total flux cleaned = -0.000308193 Jy
! Component: 550  -  total flux cleaned = -0.000299195 Jy
! Component: 600  -  total flux cleaned = -0.00027275 Jy
! Component: 650  -  total flux cleaned = -0.000238195 Jy
! Component: 700  -  total flux cleaned = -0.00021262 Jy
! Component: 750  -  total flux cleaned = -0.000204389 Jy
! Component: 800  -  total flux cleaned = -0.000204428 Jy
! Component: 850  -  total flux cleaned = -0.000196241 Jy
! Component: 900  -  total flux cleaned = -0.000180312 Jy
! Component: 950  -  total flux cleaned = -0.00016463 Jy
! Component: 1000  -  total flux cleaned = -0.000149206 Jy
! Component: 1050  -  total flux cleaned = -0.000118843 Jy
! Component: 1100  -  total flux cleaned = -0.000111385 Jy
! Component: 1150  -  total flux cleaned = -8.91479e-05 Jy
! Component: 1200  -  total flux cleaned = -7.44154e-05 Jy
! Component: 1250  -  total flux cleaned = -5.99824e-05 Jy
! Component: 1300  -  total flux cleaned = -1.70124e-05 Jy
! Component: 1350  -  total flux cleaned = -1.00772e-05 Jy
! Component: 1400  -  total flux cleaned = 3.91067e-06 Jy
! Component: 1450  -  total flux cleaned = 1.77948e-05 Jy
! Component: 1500  -  total flux cleaned = 4.51355e-05 Jy
! Component: 1550  -  total flux cleaned = 6.5471e-05 Jy
! Component: 1600  -  total flux cleaned = 7.89091e-05 Jy
! Component: 1650  -  total flux cleaned = 9.22929e-05 Jy
! Component: 1700  -  total flux cleaned = 0.000125053 Jy
! Component: 1750  -  total flux cleaned = 0.000118547 Jy
! Component: 1800  -  total flux cleaned = 0.000157267 Jy
! Component: 1850  -  total flux cleaned = 0.000144499 Jy
! Component: 1900  -  total flux cleaned = 0.000163565 Jy
! Component: 1950  -  total flux cleaned = 0.000182423 Jy
! Component: 2000  -  total flux cleaned = 0.00018249 Jy
! Total flux subtracted in 2048 components = 0.000182537 Jy
! Clean residual min=-0.000356 max=0.000372 Jy/beam
! Clean residual mean=-0.000000 rms=0.000116 Jy/beam
! Combined flux in latest and established models = 0.101136 Jy
keep
! Adding 177 model components to the UV plane model.
! The established model now contains 316 components and 0.101136 Jy
![Exited script file: muppet]
wmap "J0750+5015_X_2017_02_24_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.001 x 1.628 at 20.39 degrees (North through East)
! Clean map  min=-0.0008385  max=0.051002 Jy/beam
! Writing clean map to FITS file: J0750+5015_X_2017_02_24_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0510015 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000115755 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.680894 0.680894 1.36179 2.72358 5.44715 10.8943 21.7886 43.5772 87.1544
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.051 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.001 x 1.628 at 20.39 degrees (North through East)
! Clean map  min=-0.0008385  max=0.051002 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J0750+5015_X_2017_02_24_pus_uvs.log closed on Sat May  4 09:59:58 2019