! Started logfile: J0750+1919_S_2017_10_09_pus_uvs.log on Sun May 12 13:07:25 2019 obs J0750+1919_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0750+1919_S_2017_10_09_pus_uva.fits ! AN table 1: 235 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.761466 visibilities/baseline/integration-bin. ! Found source: J0750+1919 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 25768 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0750+1919_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 257 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 404 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 257 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1154 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.940699Jy sigma=0.008805 ! Fit after self-cal, rms=0.920411Jy sigma=0.008618 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.708 mas, bmaj=9.924 mas, bpa=-18.75 degrees ! Estimated noise=1407.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0607723 Jy ! Component: 100 - total flux cleaned = 0.0740539 Jy ! Total flux subtracted in 100 components = 0.0740539 Jy ! Clean residual min=-0.004286 max=0.005322 Jy/beam ! Clean residual mean=-0.000011 rms=0.001155 Jy/beam ! Combined flux in latest and established models = 0.0740539 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0740539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081129Jy sigma=0.000660 ! Fit after self-cal, rms=0.081103Jy sigma=0.000660 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.375 mas, bmaj=10.25 mas, bpa=-18.77 degrees ! Estimated noise=550.039 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00640826 Jy ! Component: 100 - total flux cleaned = 0.00919634 Jy ! Component: 150 - total flux cleaned = 0.0107682 Jy ! Component: 200 - total flux cleaned = 0.011769 Jy ! Total flux subtracted in 200 components = 0.011769 Jy ! Clean residual min=-0.002413 max=0.001965 Jy/beam ! Clean residual mean=-0.000006 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.0858229 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 36 components and 0.0858229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080448Jy sigma=0.000656 ! Fit after self-cal, rms=0.080419Jy sigma=0.000656 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 1.00 KP 1.10 ! LA 1.04 MK 1.02 NL 0.96 OV 1.00* ! PT 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 1.05 KP 1.03 ! LA 0.99 MK 1.01 NL 0.65 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.04 HN 1.02 KP 0.88 ! LA 0.80 MK 1.04 NL 1.13 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 4. ! A total of 198 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.95 KP 1.00* ! LA 0.80 MK 0.92 NL 1.00* OV 1.00* ! PT 0.97 ! ! ! Fit before self-cal, rms=0.080419Jy sigma=0.000656 ! Fit after self-cal, rms=0.075710Jy sigma=0.000652 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.424 mas, bmaj=10.3 mas, bpa=-18.51 degrees ! Estimated noise=551.104 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000328686 Jy ! Component: 100 - total flux cleaned = -0.00037603 Jy ! Component: 150 - total flux cleaned = -0.000305905 Jy ! Component: 200 - total flux cleaned = -0.000259324 Jy ! Total flux subtracted in 200 components = -0.000259324 Jy ! Clean residual min=-0.001378 max=0.001848 Jy/beam ! Clean residual mean=0.000001 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.0855636 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.0855636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075699Jy sigma=0.000652 ! Fit after self-cal, rms=0.075625Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075625Jy sigma=0.000652 ! Fit after self-cal, rms=0.074741Jy sigma=0.000652 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=10.29 mas, bpa=-18.6 degrees ! Estimated noise=550.256 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136956 Jy ! Component: 100 - total flux cleaned = 0.000112238 Jy ! Component: 150 - total flux cleaned = 9.13842e-05 Jy ! Component: 200 - total flux cleaned = 8.30403e-05 Jy ! Total flux subtracted in 200 components = 8.30403e-05 Jy ! Clean residual min=-0.001346 max=0.001496 Jy/beam ! Clean residual mean=-0.000002 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.0856467 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.0856467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074737Jy sigma=0.000652 ! Fit after self-cal, rms=0.074718Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (123.5, 75). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000734566 Jy ! Component: 100 - total flux cleaned = 0.000708536 Jy ! Component: 150 - total flux cleaned = 0.000585676 Jy ! Component: 200 - total flux cleaned = 0.000463296 Jy ! Total flux subtracted in 200 components = 0.000463296 Jy ! Clean residual min=-0.001206 max=0.001152 Jy/beam ! Clean residual mean=-0.000003 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.0861099 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 77 components and 0.08611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074687Jy sigma=0.000651 ! Fit after self-cal, rms=0.074682Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074682Jy sigma=0.000651 ! Fit after self-cal, rms=0.074773Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.425 mas, bmaj=10.28 mas, bpa=-18.66 degrees ! Estimated noise=551.508 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000371282 Jy ! Component: 100 - total flux cleaned = 0.000392122 Jy ! Component: 150 - total flux cleaned = 0.000356207 Jy ! Component: 200 - total flux cleaned = 0.000324346 Jy ! Total flux subtracted in 200 components = 0.000324346 Jy ! Clean residual min=-0.001190 max=0.001099 Jy/beam ! Clean residual mean=-0.000003 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.0864343 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 85 components and 0.0864343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074760Jy sigma=0.000651 ! Fit after self-cal, rms=0.074757Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.67797e-05 Jy ! Component: 100 - total flux cleaned = -4.12214e-05 Jy ! Component: 150 - total flux cleaned = -5.49301e-05 Jy ! Component: 200 - total flux cleaned = -6.7647e-05 Jy ! Total flux subtracted in 200 components = -6.7647e-05 Jy ! Clean residual min=-0.001211 max=0.001061 Jy/beam ! Clean residual mean=-0.000002 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.0863667 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 96 components and 0.0863667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074751Jy sigma=0.000651 ! Fit after self-cal, rms=0.074751Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074751Jy sigma=0.000651 ! Fit after self-cal, rms=0.074801Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.365 mas, bmaj=11.3 mas, bpa=-18.36 degrees ! Estimated noise=681.451 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.66648e-05 Jy ! Component: 100 - total flux cleaned = 5.67341e-06 Jy ! Component: 150 - total flux cleaned = 2.81962e-05 Jy ! Component: 200 - total flux cleaned = 1.81925e-05 Jy ! Total flux subtracted in 200 components = 1.81925e-05 Jy ! Clean residual min=-0.001540 max=0.001125 Jy/beam ! Clean residual mean=-0.000003 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.0863849 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 111 components and 0.0863849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074798Jy sigma=0.000651 ! Fit after self-cal, rms=0.074797Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.06947e-05 Jy ! Component: 100 - total flux cleaned = -6.10146e-05 Jy ! Component: 150 - total flux cleaned = -6.09983e-05 Jy ! Component: 200 - total flux cleaned = -6.1014e-05 Jy ! Total flux subtracted in 200 components = -6.1014e-05 Jy ! Clean residual min=-0.001516 max=0.001107 Jy/beam ! Clean residual mean=-0.000003 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.0863238 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 118 components and 0.0863238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074796Jy sigma=0.000651 ! Fit after self-cal, rms=0.074796Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.425 mas, bmaj=10.27 mas, bpa=-18.68 degrees ! Estimated noise=552.029 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.425 x 10.27 at -18.68 degrees (North through East) ! Clean map min=-0.0013217 max=0.080453 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.721 mas, bmaj=9.895 mas, bpa=-18.67 degrees ! Estimated noise=1416.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0610422 Jy ! Component: 100 - total flux cleaned = 0.0744102 Jy ! Component: 150 - total flux cleaned = 0.0790022 Jy ! Component: 200 - total flux cleaned = 0.080942 Jy ! Total flux subtracted in 200 components = 0.080942 Jy ! Clean residual min=-0.003598 max=0.003756 Jy/beam ! Clean residual mean=-0.000004 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.080942 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.080942 Jy ! Inverting map and beam ! Estimated beam: bmin=3.425 mas, bmaj=10.27 mas, bpa=-18.68 degrees ! Estimated noise=552.029 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00375665 Jy ! Component: 100 - total flux cleaned = 0.00481809 Jy ! Component: 150 - total flux cleaned = 0.00502182 Jy ! Component: 200 - total flux cleaned = 0.00515026 Jy ! Total flux subtracted in 200 components = 0.00515026 Jy ! Clean residual min=-0.001346 max=0.001241 Jy/beam ! Clean residual mean=-0.000003 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.0860923 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 49 components and 0.0860923 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.365 mas, bmaj=11.3 mas, bpa=-18.36 degrees ! Estimated noise=681.451 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000290551 Jy ! Component: 100 - total flux cleaned = 0.000262584 Jy ! Component: 150 - total flux cleaned = 0.000239404 Jy ! Component: 200 - total flux cleaned = 0.00023881 Jy ! Total flux subtracted in 200 components = 0.00023881 Jy ! Clean residual min=-0.001438 max=0.001079 Jy/beam ! Clean residual mean=-0.000003 rms=0.000345 Jy/beam ! Combined flux in latest and established models = 0.0863311 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.79728e-05 Jy ! Component: 100 - total flux cleaned = -3.24634e-05 Jy ! Component: 150 - total flux cleaned = -3.21288e-05 Jy ! Component: 200 - total flux cleaned = -4.39892e-05 Jy ! Total flux subtracted in 200 components = -4.39892e-05 Jy ! Clean residual min=-0.001440 max=0.001078 Jy/beam ! Clean residual mean=-0.000003 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0862871 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 78 components and 0.0862871 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.425 mas, bmaj=10.27 mas, bpa=-18.68 degrees ! Estimated noise=552.029 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000226386 Jy ! Component: 100 - total flux cleaned = -0.000200699 Jy ! Component: 150 - total flux cleaned = -0.000263752 Jy ! Component: 200 - total flux cleaned = -0.00024562 Jy ! Total flux subtracted in 200 components = -0.00024562 Jy ! Clean residual min=-0.001236 max=0.001086 Jy/beam ! Clean residual mean=-0.000002 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.0860415 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 85 components and 0.0860415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074803Jy sigma=0.000651 ! Fit after self-cal, rms=0.074797Jy sigma=0.000651 wmodel J0750+1919_S_2017_10_09_pus_map.mod ! Writing 85 model components to file: J0750+1919_S_2017_10_09_pus_map.mod wobs J0750+1919_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0750+1919_S_2017_10_09_pus_uvs.fits wwins J0750+1919_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J0750+1919_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000405531 Jy ! Component: 100 - total flux cleaned = -0.000503966 Jy ! Component: 150 - total flux cleaned = -0.000613786 Jy ! Component: 200 - total flux cleaned = -0.000596622 Jy ! Component: 250 - total flux cleaned = -0.000629003 Jy ! Component: 300 - total flux cleaned = -0.000628676 Jy ! Component: 350 - total flux cleaned = -0.00055306 Jy ! Component: 400 - total flux cleaned = -0.000494715 Jy ! Component: 450 - total flux cleaned = -0.000424066 Jy ! Component: 500 - total flux cleaned = -0.000410263 Jy ! Component: 550 - total flux cleaned = -0.00034308 Jy ! Component: 600 - total flux cleaned = -0.000264969 Jy ! Component: 650 - total flux cleaned = -0.000201208 Jy ! Component: 700 - total flux cleaned = -0.000102239 Jy ! Component: 750 - total flux cleaned = -5.37975e-05 Jy ! Component: 800 - total flux cleaned = 2.91911e-05 Jy ! Component: 850 - total flux cleaned = 0.000110598 Jy ! Component: 900 - total flux cleaned = 0.000179014 Jy ! Component: 950 - total flux cleaned = 0.000212477 Jy ! Component: 1000 - total flux cleaned = 0.000267357 Jy ! Component: 1050 - total flux cleaned = 0.000310421 Jy ! Component: 1100 - total flux cleaned = 0.000342098 Jy ! Component: 1150 - total flux cleaned = 0.00039442 Jy ! Component: 1200 - total flux cleaned = 0.000455883 Jy ! Component: 1250 - total flux cleaned = 0.000516365 Jy ! Component: 1300 - total flux cleaned = 0.000565818 Jy ! Component: 1350 - total flux cleaned = 0.000585377 Jy ! Component: 1400 - total flux cleaned = 0.000633363 Jy ! Component: 1450 - total flux cleaned = 0.00064294 Jy ! Component: 1500 - total flux cleaned = 0.000680328 Jy ! Component: 1550 - total flux cleaned = 0.000689758 Jy ! Component: 1600 - total flux cleaned = 0.000726017 Jy ! Component: 1650 - total flux cleaned = 0.000735097 Jy ! Component: 1700 - total flux cleaned = 0.00077926 Jy ! Component: 1750 - total flux cleaned = 0.000814016 Jy ! Component: 1800 - total flux cleaned = 0.000839778 Jy ! Component: 1850 - total flux cleaned = 0.000839673 Jy ! Component: 1900 - total flux cleaned = 0.000873266 Jy ! Component: 1950 - total flux cleaned = 0.000873236 Jy ! Component: 2000 - total flux cleaned = 0.000865045 Jy ! Component: 2050 - total flux cleaned = 0.000881222 Jy ! Component: 2100 - total flux cleaned = 0.000881162 Jy ! Component: 2150 - total flux cleaned = 0.000857417 Jy ! Component: 2200 - total flux cleaned = 0.00085745 Jy ! Component: 2250 - total flux cleaned = 0.000857458 Jy ! Component: 2300 - total flux cleaned = 0.000834399 Jy ! Component: 2350 - total flux cleaned = 0.000826818 Jy ! Component: 2400 - total flux cleaned = 0.000819389 Jy ! Component: 2450 - total flux cleaned = 0.000826851 Jy ! Component: 2500 - total flux cleaned = 0.000834105 Jy ! Component: 2550 - total flux cleaned = 0.000804842 Jy ! Component: 2600 - total flux cleaned = 0.000804801 Jy ! Component: 2650 - total flux cleaned = 0.000804711 Jy ! Component: 2700 - total flux cleaned = 0.000797521 Jy ! Component: 2750 - total flux cleaned = 0.000790526 Jy ! Component: 2800 - total flux cleaned = 0.000811488 Jy ! Component: 2850 - total flux cleaned = 0.000783788 Jy ! Component: 2900 - total flux cleaned = 0.000783829 Jy ! Component: 2950 - total flux cleaned = 0.000776986 Jy ! Component: 3000 - total flux cleaned = 0.000749957 Jy ! Component: 3050 - total flux cleaned = 0.000783571 Jy ! Component: 3100 - total flux cleaned = 0.000756795 Jy ! Component: 3150 - total flux cleaned = 0.000730295 Jy ! Component: 3200 - total flux cleaned = 0.000743392 Jy ! Component: 3250 - total flux cleaned = 0.000710778 Jy ! Component: 3300 - total flux cleaned = 0.000704323 Jy ! Component: 3350 - total flux cleaned = 0.000704392 Jy ! Component: 3400 - total flux cleaned = 0.000704394 Jy ! Component: 3450 - total flux cleaned = 0.000698033 Jy ! Component: 3500 - total flux cleaned = 0.000723331 Jy ! Component: 3550 - total flux cleaned = 0.000698274 Jy ! Component: 3600 - total flux cleaned = 0.000723259 Jy ! Component: 3650 - total flux cleaned = 0.000698421 Jy ! Component: 3700 - total flux cleaned = 0.00071696 Jy ! Component: 3750 - total flux cleaned = 0.00071694 Jy ! Component: 3800 - total flux cleaned = 0.000710892 Jy ! Component: 3850 - total flux cleaned = 0.000692721 Jy ! Component: 3900 - total flux cleaned = 0.000686724 Jy ! Component: 3950 - total flux cleaned = 0.000692745 Jy ! Component: 4000 - total flux cleaned = 0.000674793 Jy ! Component: 4050 - total flux cleaned = 0.000662866 Jy ! Total flux subtracted in 4096 components = 0.000668773 Jy ! Clean residual min=-0.000339 max=0.000403 Jy/beam ! Clean residual mean=-0.000000 rms=0.000110 Jy/beam ! Combined flux in latest and established models = 0.0867103 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 377 components and 0.0867103 Jy ![Exited script file: muppet] wmap "J0750+1919_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.425 x 10.27 at -18.68 degrees (North through East) ! Clean map min=-0.0010903 max=0.080479 Jy/beam ! Writing clean map to FITS file: J0750+1919_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0804792 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000106561 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.397224 0.397224 0.794449 1.5889 3.17779 6.35559 12.7112 25.4224 50.8447 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.08 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.425 x 10.27 at -18.68 degrees (North through East) ! Clean map min=-0.0010903 max=0.080479 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0750+1919_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:07:31 2019