! Started logfile: J0750+1919_S_2017_09_26_pus_uvs.log on Sat May 11 12:57:52 2019 obs J0750+1919_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0750+1919_S_2017_09_26_pus_uva.fits ! AN table 1: 175 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.669683 visibilities/baseline/integration-bin. ! Found source: J0750+1919 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 16876 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0750+1919_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 274 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 346 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 274 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1097 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.944319Jy sigma=0.008598 ! Fit after self-cal, rms=0.929649Jy sigma=0.008472 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.85 mas, bmaj=11.02 mas, bpa=-7.54 degrees ! Estimated noise=1644 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0573977 Jy ! Component: 100 - total flux cleaned = 0.0699242 Jy ! Total flux subtracted in 100 components = 0.0699242 Jy ! Clean residual min=-0.004116 max=0.004484 Jy/beam ! Clean residual mean=-0.000000 rms=0.001117 Jy/beam ! Combined flux in latest and established models = 0.0699242 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0699242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076367Jy sigma=0.000656 ! Fit after self-cal, rms=0.076292Jy sigma=0.000656 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.925 mas, bmaj=11.59 mas, bpa=-7.834 degrees ! Estimated noise=684.856 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285538 Jy ! Component: 100 - total flux cleaned = 0.00436019 Jy ! Component: 150 - total flux cleaned = 0.00528843 Jy ! Component: 200 - total flux cleaned = 0.00564654 Jy ! Total flux subtracted in 200 components = 0.00564654 Jy ! Clean residual min=-0.002292 max=0.002883 Jy/beam ! Clean residual mean=0.000000 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.0755707 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 16 components and 0.0755708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076167Jy sigma=0.000655 ! Fit after self-cal, rms=0.076155Jy sigma=0.000655 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 0.99 KP 1.03 ! LA 1.03 MK 1.04 NL 0.94 OV 1.07 ! PT 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.00* HN 1.03 KP 1.02 ! LA 0.94 MK 0.98 NL 1.02 OV 1.02 ! PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 0.96 KP 0.93 ! LA 0.96 MK 1.00 NL 1.01 OV 0.99 ! PT 0.96 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00 KP 1.00* ! LA 0.99 MK 0.96 NL 1.00* OV 0.66 ! PT 0.97 ! ! ! Fit before self-cal, rms=0.076155Jy sigma=0.000655 ! Fit after self-cal, rms=0.074699Jy sigma=0.000651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.906 mas, bmaj=11.75 mas, bpa=-7.901 degrees ! Estimated noise=681.363 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000771641 Jy ! Component: 100 - total flux cleaned = -0.000858747 Jy ! Component: 150 - total flux cleaned = -0.000859507 Jy ! Component: 200 - total flux cleaned = -0.000845864 Jy ! Total flux subtracted in 200 components = -0.000845864 Jy ! Clean residual min=-0.001986 max=0.002590 Jy/beam ! Clean residual mean=0.000001 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.0747249 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 24 components and 0.0747249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074682Jy sigma=0.000651 ! Fit after self-cal, rms=0.074686Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074686Jy sigma=0.000651 ! Fit after self-cal, rms=0.076383Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.908 mas, bmaj=11.68 mas, bpa=-8.147 degrees ! Estimated noise=679.745 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.90047e-05 Jy ! Component: 100 - total flux cleaned = -8.2289e-05 Jy ! Component: 150 - total flux cleaned = -6.92288e-05 Jy ! Component: 200 - total flux cleaned = -5.92643e-05 Jy ! Total flux subtracted in 200 components = -5.92643e-05 Jy ! Clean residual min=-0.001415 max=0.001473 Jy/beam ! Clean residual mean=0.000002 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0746656 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 0.0746656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076377Jy sigma=0.000649 ! Fit after self-cal, rms=0.076492Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.47447e-05 Jy ! Component: 100 - total flux cleaned = 5.43209e-05 Jy ! Component: 150 - total flux cleaned = 6.48043e-05 Jy ! Component: 200 - total flux cleaned = 7.43408e-05 Jy ! Total flux subtracted in 200 components = 7.43408e-05 Jy ! Clean residual min=-0.001381 max=0.001403 Jy/beam ! Clean residual mean=0.000001 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.07474 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.07474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076492Jy sigma=0.000649 ! Fit after self-cal, rms=0.076493Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076493Jy sigma=0.000649 ! Fit after self-cal, rms=0.077065Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.916 mas, bmaj=11.67 mas, bpa=-8.267 degrees ! Estimated noise=679.494 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000252648 Jy ! Component: 100 - total flux cleaned = -0.000242162 Jy ! Component: 150 - total flux cleaned = -0.000233435 Jy ! Component: 200 - total flux cleaned = -0.000226498 Jy ! Total flux subtracted in 200 components = -0.000226498 Jy ! Clean residual min=-0.001368 max=0.001414 Jy/beam ! Clean residual mean=0.000002 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.0745135 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.0745135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077061Jy sigma=0.000648 ! Fit after self-cal, rms=0.077079Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.24761e-05 Jy ! Component: 100 - total flux cleaned = -2.31268e-05 Jy ! Component: 150 - total flux cleaned = -2.79075e-05 Jy ! Component: 200 - total flux cleaned = -2.33731e-05 Jy ! Total flux subtracted in 200 components = -2.33731e-05 Jy ! Clean residual min=-0.001365 max=0.001409 Jy/beam ! Clean residual mean=0.000001 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.0744901 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 55 components and 0.0744901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077078Jy sigma=0.000648 ! Fit after self-cal, rms=0.077079Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077079Jy sigma=0.000648 ! Fit after self-cal, rms=0.077187Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.814 mas, bmaj=12.1 mas, bpa=-14.36 degrees ! Estimated noise=741.255 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109789 Jy ! Component: 100 - total flux cleaned = -0.000119664 Jy ! Component: 150 - total flux cleaned = -0.000134962 Jy ! Component: 200 - total flux cleaned = -0.00014066 Jy ! Total flux subtracted in 200 components = -0.00014066 Jy ! Clean residual min=-0.001412 max=0.001182 Jy/beam ! Clean residual mean=0.000001 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0743494 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 60 components and 0.0743494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077186Jy sigma=0.000648 ! Fit after self-cal, rms=0.077191Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.47055e-06 Jy ! Component: 100 - total flux cleaned = -9.75117e-06 Jy ! Component: 150 - total flux cleaned = -1.44094e-05 Jy ! Component: 200 - total flux cleaned = -1.41559e-05 Jy ! Total flux subtracted in 200 components = -1.41559e-05 Jy ! Clean residual min=-0.001411 max=0.001171 Jy/beam ! Clean residual mean=0.000001 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.0743353 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 67 components and 0.0743353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077190Jy sigma=0.000648 ! Fit after self-cal, rms=0.077190Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.925 mas, bmaj=11.66 mas, bpa=-8.345 degrees ! Estimated noise=679.21 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.925 x 11.66 at -8.345 degrees (North through East) ! Clean map min=-0.0013459 max=0.072675 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.84 mas, bmaj=11.05 mas, bpa=-7.712 degrees ! Estimated noise=1625.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0565517 Jy ! Component: 100 - total flux cleaned = 0.0689435 Jy ! Component: 150 - total flux cleaned = 0.0720502 Jy ! Component: 200 - total flux cleaned = 0.0733614 Jy ! Total flux subtracted in 200 components = 0.0733614 Jy ! Clean residual min=-0.003008 max=0.003278 Jy/beam ! Clean residual mean=0.000001 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.0733614 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0733614 Jy ! Inverting map and beam ! Estimated beam: bmin=4.925 mas, bmaj=11.66 mas, bpa=-8.345 degrees ! Estimated noise=679.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000649951 Jy ! Component: 100 - total flux cleaned = 0.000787026 Jy ! Component: 150 - total flux cleaned = 0.000786027 Jy ! Component: 200 - total flux cleaned = 0.000786179 Jy ! Total flux subtracted in 200 components = 0.000786179 Jy ! Clean residual min=-0.001437 max=0.001456 Jy/beam ! Clean residual mean=0.000001 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.0741476 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 0.0741476 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.814 mas, bmaj=12.1 mas, bpa=-14.36 degrees ! Estimated noise=741.255 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136564 Jy ! Component: 100 - total flux cleaned = 0.000123108 Jy ! Component: 150 - total flux cleaned = 0.000112019 Jy ! Component: 200 - total flux cleaned = 0.000111814 Jy ! Total flux subtracted in 200 components = 0.000111814 Jy ! Clean residual min=-0.001477 max=0.001183 Jy/beam ! Clean residual mean=0.000001 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.0742594 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.58975e-06 Jy ! Component: 100 - total flux cleaned = 1.59956e-05 Jy ! Component: 150 - total flux cleaned = 1.57567e-05 Jy ! Component: 200 - total flux cleaned = 2.20575e-05 Jy ! Total flux subtracted in 200 components = 2.20575e-05 Jy ! Clean residual min=-0.001463 max=0.001174 Jy/beam ! Clean residual mean=0.000001 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.0742814 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 48 components and 0.0742814 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.925 mas, bmaj=11.66 mas, bpa=-8.345 degrees ! Estimated noise=679.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.69742e-05 Jy ! Component: 100 - total flux cleaned = 8.74749e-05 Jy ! Component: 150 - total flux cleaned = 7.86448e-05 Jy ! Component: 200 - total flux cleaned = 7.05961e-05 Jy ! Total flux subtracted in 200 components = 7.05961e-05 Jy ! Clean residual min=-0.001425 max=0.001415 Jy/beam ! Clean residual mean=0.000002 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.074352 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 62 components and 0.074352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077193Jy sigma=0.000648 ! Fit after self-cal, rms=0.077191Jy sigma=0.000648 wmodel J0750+1919_S_2017_09_26_pus_map.mod ! Writing 62 model components to file: J0750+1919_S_2017_09_26_pus_map.mod wobs J0750+1919_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0750+1919_S_2017_09_26_pus_uvs.fits wwins J0750+1919_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J0750+1919_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000256549 Jy ! Component: 100 - total flux cleaned = 0.000375999 Jy ! Component: 150 - total flux cleaned = 0.00046465 Jy ! Component: 200 - total flux cleaned = 0.000444344 Jy ! Component: 250 - total flux cleaned = 0.00044448 Jy ! Component: 300 - total flux cleaned = 0.000443471 Jy ! Component: 350 - total flux cleaned = 0.000497727 Jy ! Component: 400 - total flux cleaned = 0.000515515 Jy ! Component: 450 - total flux cleaned = 0.000550292 Jy ! Component: 500 - total flux cleaned = 0.0006169 Jy ! Component: 550 - total flux cleaned = 0.000632681 Jy ! Component: 600 - total flux cleaned = 0.00063286 Jy ! Component: 650 - total flux cleaned = 0.000694297 Jy ! Component: 700 - total flux cleaned = 0.000783758 Jy ! Component: 750 - total flux cleaned = 0.000856205 Jy ! Component: 800 - total flux cleaned = 0.000898455 Jy ! Component: 850 - total flux cleaned = 0.000968031 Jy ! Component: 900 - total flux cleaned = 0.00103621 Jy ! Component: 950 - total flux cleaned = 0.00108953 Jy ! Component: 1000 - total flux cleaned = 0.00111545 Jy ! Component: 1050 - total flux cleaned = 0.00115389 Jy ! Component: 1100 - total flux cleaned = 0.00120437 Jy ! Component: 1150 - total flux cleaned = 0.00121677 Jy ! Component: 1200 - total flux cleaned = 0.00125335 Jy ! Component: 1250 - total flux cleaned = 0.00127733 Jy ! Component: 1300 - total flux cleaned = 0.00132441 Jy ! Component: 1350 - total flux cleaned = 0.00139389 Jy ! Component: 1400 - total flux cleaned = 0.00140533 Jy ! Component: 1450 - total flux cleaned = 0.00148389 Jy ! Component: 1500 - total flux cleaned = 0.00148375 Jy ! Component: 1550 - total flux cleaned = 0.00148375 Jy ! Component: 1600 - total flux cleaned = 0.00148396 Jy ! Component: 1650 - total flux cleaned = 0.00150527 Jy ! Component: 1700 - total flux cleaned = 0.0015264 Jy ! Component: 1750 - total flux cleaned = 0.00150573 Jy ! Component: 1800 - total flux cleaned = 0.00149552 Jy ! Component: 1850 - total flux cleaned = 0.00147519 Jy ! Component: 1900 - total flux cleaned = 0.00145526 Jy ! Component: 1950 - total flux cleaned = 0.0014356 Jy ! Component: 2000 - total flux cleaned = 0.00142577 Jy ! Component: 2050 - total flux cleaned = 0.00144471 Jy ! Component: 2100 - total flux cleaned = 0.00140671 Jy ! Component: 2150 - total flux cleaned = 0.00141615 Jy ! Component: 2200 - total flux cleaned = 0.00144398 Jy ! Component: 2250 - total flux cleaned = 0.00146232 Jy ! Component: 2300 - total flux cleaned = 0.00148965 Jy ! Component: 2350 - total flux cleaned = 0.00151655 Jy ! Component: 2400 - total flux cleaned = 0.00151664 Jy ! Component: 2450 - total flux cleaned = 0.00154312 Jy ! Component: 2500 - total flux cleaned = 0.00155182 Jy ! Component: 2550 - total flux cleaned = 0.0015345 Jy ! Component: 2600 - total flux cleaned = 0.00152602 Jy ! Component: 2650 - total flux cleaned = 0.00154301 Jy ! Component: 2700 - total flux cleaned = 0.00152621 Jy ! Component: 2750 - total flux cleaned = 0.0015596 Jy ! Component: 2800 - total flux cleaned = 0.00156788 Jy ! Component: 2850 - total flux cleaned = 0.00155976 Jy ! Component: 2900 - total flux cleaned = 0.00158429 Jy ! Component: 2950 - total flux cleaned = 0.00158429 Jy ! Component: 3000 - total flux cleaned = 0.00157637 Jy ! Component: 3050 - total flux cleaned = 0.00159241 Jy ! Component: 3100 - total flux cleaned = 0.00160828 Jy ! Component: 3150 - total flux cleaned = 0.00163181 Jy ! Component: 3200 - total flux cleaned = 0.00163969 Jy ! Component: 3250 - total flux cleaned = 0.00167826 Jy ! Component: 3300 - total flux cleaned = 0.00166294 Jy ! Component: 3350 - total flux cleaned = 0.00170866 Jy ! Component: 3400 - total flux cleaned = 0.0017238 Jy ! Component: 3450 - total flux cleaned = 0.0017464 Jy ! Component: 3500 - total flux cleaned = 0.00175382 Jy ! Component: 3550 - total flux cleaned = 0.00177608 Jy ! Component: 3600 - total flux cleaned = 0.00179087 Jy ! Component: 3650 - total flux cleaned = 0.0018275 Jy ! Component: 3700 - total flux cleaned = 0.00186379 Jy ! Component: 3750 - total flux cleaned = 0.00188547 Jy ! Component: 3800 - total flux cleaned = 0.00189982 Jy ! Component: 3850 - total flux cleaned = 0.0019497 Jy ! Component: 3900 - total flux cleaned = 0.00197802 Jy ! Component: 3950 - total flux cleaned = 0.00197807 Jy ! Component: 4000 - total flux cleaned = 0.00202708 Jy ! Component: 4050 - total flux cleaned = 0.00205487 Jy ! Total flux subtracted in 4096 components = 0.00206872 Jy ! Clean residual min=-0.000490 max=0.000392 Jy/beam ! Clean residual mean=0.000001 rms=0.000128 Jy/beam ! Combined flux in latest and established models = 0.0764208 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 346 components and 0.0764207 Jy ![Exited script file: muppet] wmap "J0750+1919_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.925 x 11.66 at -8.345 degrees (North through East) ! Clean map min=-0.00082276 max=0.07259 Jy/beam ! Writing clean map to FITS file: J0750+1919_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0725896 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000127036 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.525016 0.525016 1.05003 2.10006 4.20013 8.40025 16.8005 33.601 67.202 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.072 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.925 x 11.66 at -8.345 degrees (North through East) ! Clean map min=-0.00082276 max=0.07259 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0750+1919_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:57:59 2019