! Started logfile: J0750+1021_S_2017_05_01_pus_uvs.log on Wed May 1 18:31:02 2019 obs J0750+1021_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0750+1021_S_2017_05_01_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.968142 visibilities/baseline/integration-bin. ! Found source: J0750+1021 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 19692 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0750+1021_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 469 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.844996Jy sigma=0.040918 ! Fit after self-cal, rms=0.838567Jy sigma=0.040889 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=7.098 mas, bpa=-8.941 degrees ! Estimated noise=619.078 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.083125 Jy ! Component: 100 - total flux cleaned = 0.0948593 Jy ! Total flux subtracted in 100 components = 0.0948593 Jy ! Clean residual min=-0.034421 max=0.037547 Jy/beam ! Clean residual mean=0.000452 rms=0.010452 Jy/beam ! Combined flux in latest and established models = 0.0948593 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0948593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123155Jy sigma=0.003832 ! Fit after self-cal, rms=0.123140Jy sigma=0.003830 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.847 mas, bmaj=8.024 mas, bpa=-7.117 degrees ! Estimated noise=454.227 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240836 Jy ! Component: 100 - total flux cleaned = 0.00148288 Jy ! Component: 150 - total flux cleaned = -0.000474347 Jy ! Component: 200 - total flux cleaned = -0.00186519 Jy ! Total flux subtracted in 200 components = -0.00186519 Jy ! Clean residual min=-0.034086 max=0.036571 Jy/beam ! Clean residual mean=0.000847 rms=0.010472 Jy/beam ! Combined flux in latest and established models = 0.0929941 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0929941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116277Jy sigma=0.003949 ! Fit after self-cal, rms=0.116220Jy sigma=0.003949 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.69 HN 0.98 KP 0.77 ! LA 0.73 MK 0.93 NL 0.81 OV 0.78 ! PT 0.75 SC 0.85 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.73 HN 1.07 KP 0.74 ! LA 0.70 MK 0.91 NL 0.86 OV 0.77 ! PT 0.73 SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.77 HN 1.01 KP 0.77 ! LA 0.74 MK 0.95 NL 0.86 OV 0.71 ! PT 0.72 SC 0.89 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.80 HN 1.02 KP 1.00* ! LA 37.07 MK 1.13 NL 1.00* OV 1.00* ! PT 0.80 SC 1.00* ! ! ! Fit before self-cal, rms=0.116220Jy sigma=0.003949 ! Fit after self-cal, rms=1.333162Jy sigma=0.000730 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.739 mas, bmaj=7.781 mas, bpa=-0.6243 degrees ! Estimated noise=461.102 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00597625 Jy ! Component: 100 - total flux cleaned = 0.0088108 Jy ! Component: 150 - total flux cleaned = 0.00984256 Jy ! Component: 200 - total flux cleaned = 0.0102937 Jy ! Total flux subtracted in 200 components = 0.0102937 Jy ! Clean residual min=-0.003006 max=0.003095 Jy/beam ! Clean residual mean=0.000002 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.103288 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 18 components and 0.103288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.332928Jy sigma=0.000725 ! Fit after self-cal, rms=1.333308Jy sigma=0.000714 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.333308Jy sigma=0.000714 ! Fit after self-cal, rms=0.096220Jy sigma=0.000693 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.701 mas, bmaj=7.712 mas, bpa=-1.542 degrees ! Estimated noise=462.325 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277949 Jy ! Component: 100 - total flux cleaned = 0.00423491 Jy ! Component: 150 - total flux cleaned = 0.00479092 Jy ! Component: 200 - total flux cleaned = 0.00504218 Jy ! Total flux subtracted in 200 components = 0.00504218 Jy ! Clean residual min=-0.001762 max=0.001888 Jy/beam ! Clean residual mean=0.000004 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.10833 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 27 components and 0.10833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096074Jy sigma=0.000692 ! Fit after self-cal, rms=0.095940Jy sigma=0.000691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118797 Jy ! Component: 100 - total flux cleaned = 0.000267329 Jy ! Component: 150 - total flux cleaned = 0.000333741 Jy ! Component: 200 - total flux cleaned = 0.000414957 Jy ! Total flux subtracted in 200 components = 0.000414957 Jy ! Clean residual min=-0.001793 max=0.001871 Jy/beam ! Clean residual mean=0.000004 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.108745 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 0.108745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095926Jy sigma=0.000691 ! Fit after self-cal, rms=0.095924Jy sigma=0.000691 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095924Jy sigma=0.000691 ! Fit after self-cal, rms=0.094832Jy sigma=0.000688 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.684 mas, bmaj=7.698 mas, bpa=-1.603 degrees ! Estimated noise=464.597 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170499 Jy ! Component: 100 - total flux cleaned = 0.00259274 Jy ! Component: 150 - total flux cleaned = 0.00282019 Jy ! Component: 200 - total flux cleaned = 0.00294885 Jy ! Total flux subtracted in 200 components = 0.00294885 Jy ! Clean residual min=-0.001501 max=0.001468 Jy/beam ! Clean residual mean=0.000006 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.111694 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.111694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094759Jy sigma=0.000687 ! Fit after self-cal, rms=0.094742Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.52227e-05 Jy ! Component: 100 - total flux cleaned = 0.000143792 Jy ! Component: 150 - total flux cleaned = 0.000190391 Jy ! Component: 200 - total flux cleaned = 0.000233907 Jy ! Total flux subtracted in 200 components = 0.000233907 Jy ! Clean residual min=-0.001515 max=0.001438 Jy/beam ! Clean residual mean=0.000007 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.111928 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 45 components and 0.111928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094734Jy sigma=0.000687 ! Fit after self-cal, rms=0.094733Jy sigma=0.000687 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094733Jy sigma=0.000687 ! Fit after self-cal, rms=0.095320Jy sigma=0.000687 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.859 mas, bmaj=11.14 mas, bpa=-0.6165 degrees ! Estimated noise=539.511 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143428 Jy ! Component: 100 - total flux cleaned = 0.00207336 Jy ! Component: 150 - total flux cleaned = 0.00241494 Jy ! Component: 200 - total flux cleaned = 0.0025892 Jy ! Total flux subtracted in 200 components = 0.0025892 Jy ! Clean residual min=-0.001571 max=0.001573 Jy/beam ! Clean residual mean=0.000013 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.114517 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 63 components and 0.114517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095276Jy sigma=0.000687 ! Fit after self-cal, rms=0.095269Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144322 Jy ! Component: 100 - total flux cleaned = 0.00016541 Jy ! Component: 150 - total flux cleaned = 0.000179833 Jy ! Component: 200 - total flux cleaned = 0.000187941 Jy ! Total flux subtracted in 200 components = 0.000187941 Jy ! Clean residual min=-0.001555 max=0.001558 Jy/beam ! Clean residual mean=0.000013 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.114705 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 67 components and 0.114705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095269Jy sigma=0.000687 ! Fit after self-cal, rms=0.095268Jy sigma=0.000687 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.672 mas, bmaj=7.686 mas, bpa=-1.624 degrees ! Estimated noise=466.952 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.672 x 7.686 at -1.624 degrees (North through East) ! Clean map min=-0.0013945 max=0.11537 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.093 mas, bmaj=6.723 mas, bpa=-1.799 degrees ! Estimated noise=664.152 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0898964 Jy ! Component: 100 - total flux cleaned = 0.109797 Jy ! Component: 150 - total flux cleaned = 0.115795 Jy ! Component: 200 - total flux cleaned = 0.115685 Jy ! Total flux subtracted in 200 components = 0.115685 Jy ! Clean residual min=-0.001758 max=0.002375 Jy/beam ! Clean residual mean=0.000003 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.115685 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.115685 Jy ! Inverting map and beam ! Estimated beam: bmin=3.672 mas, bmaj=7.686 mas, bpa=-1.624 degrees ! Estimated noise=466.952 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000613882 Jy ! Component: 100 - total flux cleaned = 0.000502784 Jy ! Component: 150 - total flux cleaned = 0.000208418 Jy ! Component: 200 - total flux cleaned = -4.57952e-06 Jy ! Total flux subtracted in 200 components = -4.57952e-06 Jy ! Clean residual min=-0.001299 max=0.001534 Jy/beam ! Clean residual mean=0.000007 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.115681 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 29 components and 0.115681 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.859 mas, bmaj=11.14 mas, bpa=-0.6165 degrees ! Estimated noise=539.511 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000754242 Jy ! Component: 100 - total flux cleaned = -0.00104864 Jy ! Component: 150 - total flux cleaned = -0.00117273 Jy ! Component: 200 - total flux cleaned = -0.00129198 Jy ! Total flux subtracted in 200 components = -0.00129198 Jy ! Clean residual min=-0.001633 max=0.001514 Jy/beam ! Clean residual mean=0.000013 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.114389 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.91021e-05 Jy ! Component: 100 - total flux cleaned = -9.95415e-05 Jy ! Component: 150 - total flux cleaned = -0.000136865 Jy ! Component: 200 - total flux cleaned = -0.000171366 Jy ! Total flux subtracted in 200 components = -0.000171366 Jy ! Clean residual min=-0.001629 max=0.001510 Jy/beam ! Clean residual mean=0.000013 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.114217 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 55 components and 0.114217 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.672 mas, bmaj=7.686 mas, bpa=-1.624 degrees ! Estimated noise=466.952 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.18993e-05 Jy ! Component: 100 - total flux cleaned = -4.09527e-05 Jy ! Component: 150 - total flux cleaned = -1.55204e-05 Jy ! Component: 200 - total flux cleaned = -6.07391e-05 Jy ! Total flux subtracted in 200 components = -6.07391e-05 Jy ! Clean residual min=-0.001254 max=0.001484 Jy/beam ! Clean residual mean=0.000006 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.114157 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 0.114157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095222Jy sigma=0.000686 ! Fit after self-cal, rms=0.095215Jy sigma=0.000686 wmodel J0750+1021_S_2017_05_01_pus_map.mod ! Writing 65 model components to file: J0750+1021_S_2017_05_01_pus_map.mod wobs J0750+1021_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0750+1021_S_2017_05_01_pus_uvs.fits wwins J0750+1021_S_2017_05_01_pus_map.win ! wwins: Wrote 2 windows to J0750+1021_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000431942 Jy ! Component: 100 - total flux cleaned = 0.00055098 Jy ! Component: 150 - total flux cleaned = 0.00068744 Jy ! Component: 200 - total flux cleaned = 0.00073071 Jy ! Component: 250 - total flux cleaned = 0.000856394 Jy ! Component: 300 - total flux cleaned = 0.000937801 Jy ! Component: 350 - total flux cleaned = 0.00101693 Jy ! Component: 400 - total flux cleaned = 0.00101655 Jy ! Component: 450 - total flux cleaned = 0.00107364 Jy ! Component: 500 - total flux cleaned = 0.00116661 Jy ! Component: 550 - total flux cleaned = 0.00122115 Jy ! Component: 600 - total flux cleaned = 0.00116801 Jy ! Component: 650 - total flux cleaned = 0.00116824 Jy ! Component: 700 - total flux cleaned = 0.00118541 Jy ! Component: 750 - total flux cleaned = 0.00121896 Jy ! Component: 800 - total flux cleaned = 0.00115186 Jy ! Component: 850 - total flux cleaned = 0.00118476 Jy ! Component: 900 - total flux cleaned = 0.00115213 Jy ! Component: 950 - total flux cleaned = 0.00111984 Jy ! Component: 1000 - total flux cleaned = 0.00110395 Jy ! Component: 1050 - total flux cleaned = 0.00108831 Jy ! Component: 1100 - total flux cleaned = 0.00105739 Jy ! Component: 1150 - total flux cleaned = 0.00101172 Jy ! Component: 1200 - total flux cleaned = 0.00101204 Jy ! Component: 1250 - total flux cleaned = 0.00101219 Jy ! Component: 1300 - total flux cleaned = 0.000997271 Jy ! Component: 1350 - total flux cleaned = 0.00102632 Jy ! Component: 1400 - total flux cleaned = 0.0010117 Jy ! Component: 1450 - total flux cleaned = 0.00101177 Jy ! Component: 1500 - total flux cleaned = 0.000997351 Jy ! Component: 1550 - total flux cleaned = 0.000983193 Jy ! Component: 1600 - total flux cleaned = 0.00101088 Jy ! Component: 1650 - total flux cleaned = 0.000969575 Jy ! Component: 1700 - total flux cleaned = 0.000969473 Jy ! Component: 1750 - total flux cleaned = 0.000942592 Jy ! Component: 1800 - total flux cleaned = 0.000916031 Jy ! Component: 1850 - total flux cleaned = 0.000929298 Jy ! Component: 1900 - total flux cleaned = 0.000903041 Jy ! Component: 1950 - total flux cleaned = 0.000890015 Jy ! Component: 2000 - total flux cleaned = 0.000825383 Jy ! Component: 2050 - total flux cleaned = 0.000851097 Jy ! Component: 2100 - total flux cleaned = 0.000800114 Jy ! Component: 2150 - total flux cleaned = 0.00074968 Jy ! Component: 2200 - total flux cleaned = 0.00077481 Jy ! Component: 2250 - total flux cleaned = 0.000749886 Jy ! Component: 2300 - total flux cleaned = 0.000712867 Jy ! Component: 2350 - total flux cleaned = 0.000700642 Jy ! Component: 2400 - total flux cleaned = 0.000651975 Jy ! Component: 2450 - total flux cleaned = 0.000652114 Jy ! Component: 2500 - total flux cleaned = 0.000616126 Jy ! Component: 2550 - total flux cleaned = 0.000604122 Jy ! Component: 2600 - total flux cleaned = 0.000568622 Jy ! Component: 2650 - total flux cleaned = 0.000592056 Jy ! Component: 2700 - total flux cleaned = 0.000545232 Jy ! Component: 2750 - total flux cleaned = 0.000464121 Jy ! Component: 2800 - total flux cleaned = 0.000475735 Jy ! Component: 2850 - total flux cleaned = 0.000521585 Jy ! Component: 2900 - total flux cleaned = 0.00048739 Jy ! Component: 2950 - total flux cleaned = 0.000487389 Jy ! Component: 3000 - total flux cleaned = 0.000453592 Jy ! Component: 3050 - total flux cleaned = 0.000487006 Jy ! Component: 3100 - total flux cleaned = 0.000509186 Jy ! Component: 3150 - total flux cleaned = 0.00043199 Jy ! Component: 3200 - total flux cleaned = 0.000432117 Jy ! Component: 3250 - total flux cleaned = 0.000453831 Jy ! Component: 3300 - total flux cleaned = 0.000388879 Jy ! Component: 3350 - total flux cleaned = 0.000442703 Jy ! Component: 3400 - total flux cleaned = 0.00044251 Jy ! Component: 3450 - total flux cleaned = 0.000389363 Jy ! Component: 3500 - total flux cleaned = 0.000410578 Jy ! Component: 3550 - total flux cleaned = 0.000400075 Jy ! Component: 3600 - total flux cleaned = 0.000420983 Jy ! Component: 3650 - total flux cleaned = 0.000420905 Jy ! Component: 3700 - total flux cleaned = 0.000369243 Jy ! Component: 3750 - total flux cleaned = 0.000379416 Jy ! Component: 3800 - total flux cleaned = 0.000379385 Jy ! Component: 3850 - total flux cleaned = 0.000318332 Jy ! Component: 3900 - total flux cleaned = 0.000328557 Jy ! Component: 3950 - total flux cleaned = 0.000318367 Jy ! Component: 4000 - total flux cleaned = 0.000278302 Jy ! Component: 4050 - total flux cleaned = 0.000238513 Jy ! Total flux subtracted in 4096 components = 0.000228557 Jy ! Clean residual min=-0.000533 max=0.000596 Jy/beam ! Clean residual mean=-0.000001 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.114385 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 363 components and 0.114385 Jy ![Exited script file: muppet] wmap "J0750+1021_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.672 x 7.686 at -1.624 degrees (North through East) ! Clean map min=-0.001227 max=0.11479 Jy/beam ! Writing clean map to FITS file: J0750+1021_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.114793 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000191256 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.49983 0.49983 0.999661 1.99932 3.99864 7.99729 15.9946 31.9891 63.9783 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.114 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.672 x 7.686 at -1.624 degrees (North through East) ! Clean map min=-0.001227 max=0.11479 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0750+1021_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:31:06 2019