! Started logfile: J0748+2400_S_2017_05_01_pus_uvs.log on Wed May 1 18:30:52 2019 obs J0748+2400_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0748+2400_S_2017_05_01_pus_uva.fits ! AN table 1: 9 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.577778 visibilities/baseline/integration-bin. ! Found source: J0748+2400 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 936 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0748+2400_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.586870Jy sigma=0.004847 ! Fit after self-cal, rms=0.581572Jy sigma=0.004806 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.284 mas, bmaj=9.947 mas, bpa=-3.773 degrees ! Estimated noise=3512.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.330287 Jy ! Component: 100 - total flux cleaned = 0.410414 Jy ! Total flux subtracted in 100 components = 0.410414 Jy ! Clean residual min=-0.021643 max=0.031499 Jy/beam ! Clean residual mean=-0.000078 rms=0.006334 Jy/beam ! Combined flux in latest and established models = 0.410414 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.410414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097658Jy sigma=0.000799 ! Fit after self-cal, rms=0.097616Jy sigma=0.000798 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.14 mas, bmaj=10.34 mas, bpa=-3.057 degrees ! Estimated noise=3043.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.035941 Jy ! Component: 100 - total flux cleaned = 0.0514154 Jy ! Component: 150 - total flux cleaned = 0.0590012 Jy ! Component: 200 - total flux cleaned = 0.0605469 Jy ! Total flux subtracted in 200 components = 0.0605469 Jy ! Clean residual min=-0.010816 max=0.012607 Jy/beam ! Clean residual mean=0.000055 rms=0.003134 Jy/beam ! Combined flux in latest and established models = 0.470961 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 43 components and 0.470961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085829Jy sigma=0.000688 ! Fit after self-cal, rms=0.085728Jy sigma=0.000687 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 1.00* KP 1.02 ! LA 1.03 MK 1.02 NL 0.95 OV 1.00 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.00* KP 0.98 ! LA 0.98 MK 1.03 NL 1.01 OV 1.06 ! PT 0.98 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.05 HN 1.00* KP 1.02 ! LA 1.00 MK 1.04 NL 0.99 OV 0.95 ! PT 0.96 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.07 HN 1.00* KP 1.00* ! LA 1.01 MK 0.95 NL 1.00* OV 1.00* ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.085728Jy sigma=0.000687 ! Fit after self-cal, rms=0.082987Jy sigma=0.000662 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.158 mas, bmaj=10.35 mas, bpa=-3.156 degrees ! Estimated noise=3032.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150893 Jy ! Component: 100 - total flux cleaned = 0.00119508 Jy ! Component: 150 - total flux cleaned = 0.00119348 Jy ! Component: 200 - total flux cleaned = 0.00124087 Jy ! Total flux subtracted in 200 components = 0.00124087 Jy ! Clean residual min=-0.009096 max=0.012533 Jy/beam ! Clean residual mean=0.000042 rms=0.002648 Jy/beam ! Combined flux in latest and established models = 0.472202 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.472202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082883Jy sigma=0.000661 ! Fit after self-cal, rms=0.082893Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082893Jy sigma=0.000661 ! Fit after self-cal, rms=0.082886Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.158 mas, bmaj=10.34 mas, bpa=-3.148 degrees ! Estimated noise=3034.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000357003 Jy ! Component: 100 - total flux cleaned = 0.000395317 Jy ! Component: 150 - total flux cleaned = 0.000433796 Jy ! Component: 200 - total flux cleaned = 0.000469469 Jy ! Total flux subtracted in 200 components = 0.000469469 Jy ! Clean residual min=-0.009096 max=0.012558 Jy/beam ! Clean residual mean=0.000041 rms=0.002623 Jy/beam ! Combined flux in latest and established models = 0.472671 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 59 components and 0.472671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082849Jy sigma=0.000660 ! Fit after self-cal, rms=0.082854Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-63, 110). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107641 Jy ! Component: 100 - total flux cleaned = 0.0145608 Jy ! Component: 150 - total flux cleaned = 0.0159856 Jy ! Component: 200 - total flux cleaned = 0.0162363 Jy ! Total flux subtracted in 200 components = 0.0162363 Jy ! Clean residual min=-0.006798 max=0.005976 Jy/beam ! Clean residual mean=-0.000003 rms=0.001700 Jy/beam ! Combined flux in latest and established models = 0.488908 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 112 components and 0.488908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081494Jy sigma=0.000647 ! Fit after self-cal, rms=0.081489Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081489Jy sigma=0.000646 ! Fit after self-cal, rms=0.081333Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.165 mas, bmaj=10.35 mas, bpa=-3.099 degrees ! Estimated noise=3024.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230377 Jy ! Component: 100 - total flux cleaned = 0.00239324 Jy ! Component: 150 - total flux cleaned = 0.00275107 Jy ! Component: 200 - total flux cleaned = 0.00291679 Jy ! Total flux subtracted in 200 components = 0.00291679 Jy ! Clean residual min=-0.006176 max=0.005769 Jy/beam ! Clean residual mean=0.000002 rms=0.001529 Jy/beam ! Combined flux in latest and established models = 0.491824 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 144 components and 0.491824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081113Jy sigma=0.000644 ! Fit after self-cal, rms=0.081116Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000402513 Jy ! Component: 100 - total flux cleaned = 0.000546511 Jy ! Component: 150 - total flux cleaned = 0.000806283 Jy ! Component: 200 - total flux cleaned = 0.000926829 Jy ! Total flux subtracted in 200 components = 0.000926829 Jy ! Clean residual min=-0.006016 max=0.005742 Jy/beam ! Clean residual mean=0.000003 rms=0.001458 Jy/beam ! Combined flux in latest and established models = 0.492751 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 158 components and 0.492751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081013Jy sigma=0.000643 ! Fit after self-cal, rms=0.081011Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081011Jy sigma=0.000643 ! Fit after self-cal, rms=0.081083Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.939 mas, bmaj=11.03 mas, bpa=-3.77 degrees ! Estimated noise=3143.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128583 Jy ! Component: 100 - total flux cleaned = 0.00160454 Jy ! Component: 150 - total flux cleaned = 0.00193192 Jy ! Component: 200 - total flux cleaned = 0.00210176 Jy ! Total flux subtracted in 200 components = 0.00210176 Jy ! Clean residual min=-0.004984 max=0.005192 Jy/beam ! Clean residual mean=0.000006 rms=0.001231 Jy/beam ! Combined flux in latest and established models = 0.494853 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 185 components and 0.494853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081042Jy sigma=0.000642 ! Fit after self-cal, rms=0.081045Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176913 Jy ! Component: 100 - total flux cleaned = 0.000290914 Jy ! Component: 150 - total flux cleaned = 0.000398228 Jy ! Component: 200 - total flux cleaned = 0.000465686 Jy ! Total flux subtracted in 200 components = 0.000465686 Jy ! Clean residual min=-0.004781 max=0.005111 Jy/beam ! Clean residual mean=0.000006 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 0.495319 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 197 components and 0.495319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081013Jy sigma=0.000642 ! Fit after self-cal, rms=0.081011Jy sigma=0.000642 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.166 mas, bmaj=10.35 mas, bpa=-3.069 degrees ! Estimated noise=3024.97 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.166 x 10.35 at -3.069 degrees (North through East) ! Clean map min=-0.0057334 max=0.42686 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.305 mas, bmaj=9.955 mas, bpa=-3.702 degrees ! Estimated noise=3503.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.328575 Jy ! Component: 100 - total flux cleaned = 0.408229 Jy ! Component: 150 - total flux cleaned = 0.440168 Jy ! Component: 200 - total flux cleaned = 0.455813 Jy ! Total flux subtracted in 200 components = 0.455813 Jy ! Clean residual min=-0.011838 max=0.010170 Jy/beam ! Clean residual mean=0.000010 rms=0.003152 Jy/beam ! Combined flux in latest and established models = 0.455814 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.455814 Jy ! Inverting map and beam ! Estimated beam: bmin=6.166 mas, bmaj=10.35 mas, bpa=-3.069 degrees ! Estimated noise=3024.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119353 Jy ! Component: 100 - total flux cleaned = 0.0202597 Jy ! Component: 150 - total flux cleaned = 0.0251154 Jy ! Component: 200 - total flux cleaned = 0.0283897 Jy ! Total flux subtracted in 200 components = 0.0283897 Jy ! Clean residual min=-0.007244 max=0.006430 Jy/beam ! Clean residual mean=0.000000 rms=0.001904 Jy/beam ! Combined flux in latest and established models = 0.484203 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 69 components and 0.484203 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.939 mas, bmaj=11.03 mas, bpa=-3.77 degrees ! Estimated noise=3143.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350433 Jy ! Component: 100 - total flux cleaned = 0.00591408 Jy ! Component: 150 - total flux cleaned = 0.00731125 Jy ! Component: 200 - total flux cleaned = 0.00783847 Jy ! Total flux subtracted in 200 components = 0.00783847 Jy ! Clean residual min=-0.005806 max=0.005430 Jy/beam ! Clean residual mean=0.000001 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 0.492042 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000638157 Jy ! Component: 100 - total flux cleaned = 0.00119515 Jy ! Component: 150 - total flux cleaned = 0.00168736 Jy ! Component: 200 - total flux cleaned = 0.00217907 Jy ! Total flux subtracted in 200 components = 0.00217907 Jy ! Clean residual min=-0.005045 max=0.005061 Jy/beam ! Clean residual mean=-0.000001 rms=0.001294 Jy/beam ! Combined flux in latest and established models = 0.494221 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 124 components and 0.494221 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.166 mas, bmaj=10.35 mas, bpa=-3.069 degrees ! Estimated noise=3024.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00120859 Jy ! Component: 100 - total flux cleaned = -0.00120785 Jy ! Component: 150 - total flux cleaned = -0.00106701 Jy ! Component: 200 - total flux cleaned = -0.000936422 Jy ! Total flux subtracted in 200 components = -0.000936422 Jy ! Clean residual min=-0.006103 max=0.005676 Jy/beam ! Clean residual mean=0.000001 rms=0.001410 Jy/beam ! Combined flux in latest and established models = 0.493284 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 147 components and 0.493285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081013Jy sigma=0.000642 ! Fit after self-cal, rms=0.080991Jy sigma=0.000642 wmodel J0748+2400_S_2017_05_01_pus_map.mod ! Writing 147 model components to file: J0748+2400_S_2017_05_01_pus_map.mod wobs J0748+2400_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0748+2400_S_2017_05_01_pus_uvs.fits wwins J0748+2400_S_2017_05_01_pus_map.win ! wwins: Wrote 2 windows to J0748+2400_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000980411 Jy ! Component: 100 - total flux cleaned = -0.00216478 Jy ! Component: 150 - total flux cleaned = -0.00290454 Jy ! Component: 200 - total flux cleaned = -0.0034298 Jy ! Component: 250 - total flux cleaned = -0.00391853 Jy ! Component: 300 - total flux cleaned = -0.00437473 Jy ! Component: 350 - total flux cleaned = -0.00468286 Jy ! Component: 400 - total flux cleaned = -0.00468339 Jy ! Component: 450 - total flux cleaned = -0.00462624 Jy ! Component: 500 - total flux cleaned = -0.00451895 Jy ! Component: 550 - total flux cleaned = -0.0044141 Jy ! Component: 600 - total flux cleaned = -0.00431172 Jy ! Component: 650 - total flux cleaned = -0.00416548 Jy ! Component: 700 - total flux cleaned = -0.00392922 Jy ! Component: 750 - total flux cleaned = -0.00365489 Jy ! Component: 800 - total flux cleaned = -0.00343319 Jy ! Component: 850 - total flux cleaned = -0.00334572 Jy ! Component: 900 - total flux cleaned = -0.0031766 Jy ! Component: 950 - total flux cleaned = -0.00305356 Jy ! Component: 1000 - total flux cleaned = -0.00301367 Jy ! Component: 1050 - total flux cleaned = -0.00289537 Jy ! Component: 1100 - total flux cleaned = -0.00277946 Jy ! Component: 1150 - total flux cleaned = -0.00266441 Jy ! Component: 1200 - total flux cleaned = -0.00251475 Jy ! Component: 1250 - total flux cleaned = -0.00244084 Jy ! Component: 1300 - total flux cleaned = -0.00233202 Jy ! Component: 1350 - total flux cleaned = -0.00211815 Jy ! Component: 1400 - total flux cleaned = -0.00215392 Jy ! Component: 1450 - total flux cleaned = -0.00215348 Jy ! Component: 1500 - total flux cleaned = -0.00211965 Jy ! Component: 1550 - total flux cleaned = -0.00205268 Jy ! Component: 1600 - total flux cleaned = -0.00188677 Jy ! Component: 1650 - total flux cleaned = -0.00165645 Jy ! Component: 1700 - total flux cleaned = -0.00139529 Jy ! Component: 1750 - total flux cleaned = -0.00107128 Jy ! Component: 1800 - total flux cleaned = -0.000846587 Jy ! Component: 1850 - total flux cleaned = -0.000623612 Jy ! Component: 1900 - total flux cleaned = -0.000401936 Jy ! Component: 1950 - total flux cleaned = -0.000118964 Jy ! Component: 2000 - total flux cleaned = 3.74002e-05 Jy ! Component: 2050 - total flux cleaned = 0.000224328 Jy ! Component: 2100 - total flux cleaned = 0.000379494 Jy ! Component: 2150 - total flux cleaned = 0.000441349 Jy ! Component: 2200 - total flux cleaned = 0.000564611 Jy ! Component: 2250 - total flux cleaned = 0.000687546 Jy ! Component: 2300 - total flux cleaned = 0.000748996 Jy ! Component: 2350 - total flux cleaned = 0.000779512 Jy ! Component: 2400 - total flux cleaned = 0.000840753 Jy ! Component: 2450 - total flux cleaned = 0.000840598 Jy ! Component: 2500 - total flux cleaned = 0.00084028 Jy ! Component: 2550 - total flux cleaned = 0.000871079 Jy ! Component: 2600 - total flux cleaned = 0.000933053 Jy ! Component: 2650 - total flux cleaned = 0.00093314 Jy ! Component: 2700 - total flux cleaned = 0.000933408 Jy ! Component: 2750 - total flux cleaned = 0.000933501 Jy ! Component: 2800 - total flux cleaned = 0.000902178 Jy ! Component: 2850 - total flux cleaned = 0.000870619 Jy ! Component: 2900 - total flux cleaned = 0.00090247 Jy ! Component: 2950 - total flux cleaned = 0.000838987 Jy ! Component: 3000 - total flux cleaned = 0.000807059 Jy ! Component: 3050 - total flux cleaned = 0.000775578 Jy ! Component: 3100 - total flux cleaned = 0.000775741 Jy ! Component: 3150 - total flux cleaned = 0.000711577 Jy ! Component: 3200 - total flux cleaned = 0.000646494 Jy ! Component: 3250 - total flux cleaned = 0.000646079 Jy ! Component: 3300 - total flux cleaned = 0.000612828 Jy ! Component: 3350 - total flux cleaned = 0.000579916 Jy ! Component: 3400 - total flux cleaned = 0.00047956 Jy ! Component: 3450 - total flux cleaned = 0.000377195 Jy ! Component: 3500 - total flux cleaned = 0.000308198 Jy ! Component: 3550 - total flux cleaned = 0.000204076 Jy ! Component: 3600 - total flux cleaned = 9.80817e-05 Jy ! Component: 3650 - total flux cleaned = 2.64018e-05 Jy ! Component: 3700 - total flux cleaned = -9.92781e-06 Jy ! Component: 3750 - total flux cleaned = -8.39929e-05 Jy ! Component: 3800 - total flux cleaned = -0.000159295 Jy ! Component: 3850 - total flux cleaned = -0.000236516 Jy ! Component: 3900 - total flux cleaned = -0.000275796 Jy ! Component: 3950 - total flux cleaned = -0.000355499 Jy ! Component: 4000 - total flux cleaned = -0.000396716 Jy ! Component: 4050 - total flux cleaned = -0.000479191 Jy ! Total flux subtracted in 4096 components = -0.000562664 Jy ! Clean residual min=-0.002560 max=0.002305 Jy/beam ! Clean residual mean=0.000016 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.492722 Jy keep ! Adding 248 model components to the UV plane model. ! The established model now contains 395 components and 0.492722 Jy ![Exited script file: muppet] wmap "J0748+2400_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.166 x 10.35 at -3.069 degrees (North through East) ! Clean map min=-0.0058786 max=0.42563 Jy/beam ! Writing clean map to FITS file: J0748+2400_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.425629 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000661513 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.46626 0.46626 0.932521 1.86504 3.73008 7.46017 14.9203 29.8407 59.6813 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.425 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.166 x 10.35 at -3.069 degrees (North through East) ! Clean map min=-0.0058786 max=0.42563 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0748+2400_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:30:57 2019