! Started logfile: J0747+7639_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:08:16 2019 obs J0747+7639_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0747+7639_S_2017_01_16_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.712169 visibilities/baseline/integration-bin. ! Found source: J0747+7639 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 10768 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0747+7639_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 293 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.789984Jy sigma=0.005864 ! Fit after self-cal, rms=0.764913Jy sigma=0.005762 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.397 mas, bmaj=4.837 mas, bpa=-80.97 degrees ! Estimated noise=1556.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.208472 Jy ! Component: 100 - total flux cleaned = 0.25404 Jy ! Total flux subtracted in 100 components = 0.25404 Jy ! Clean residual min=-0.009596 max=0.013281 Jy/beam ! Clean residual mean=0.000072 rms=0.002401 Jy/beam ! Combined flux in latest and established models = 0.254041 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.254041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253196Jy sigma=0.000713 ! Fit after self-cal, rms=0.253169Jy sigma=0.000713 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.138 mas, bmaj=5.737 mas, bpa=-87.16 degrees ! Estimated noise=968.789 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116809 Jy ! Component: 100 - total flux cleaned = 0.0147126 Jy ! Component: 150 - total flux cleaned = 0.0146018 Jy ! Component: 200 - total flux cleaned = 0.0145075 Jy ! Total flux subtracted in 200 components = 0.0145075 Jy ! Clean residual min=-0.007280 max=0.010489 Jy/beam ! Clean residual mean=0.000174 rms=0.002261 Jy/beam ! Combined flux in latest and established models = 0.268548 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 17 components and 0.268548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252143Jy sigma=0.000702 ! Fit after self-cal, rms=0.252171Jy sigma=0.000702 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 0.96 KP 0.98 ! LA 1.00 MK 1.00* NL 0.87 OV 1.00 ! PT 1.04 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00 HN 1.00 KP 0.90 ! LA 0.97 MK 1.00* NL 0.96 OV 0.99 ! PT 1.04 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.01 HN 0.96 KP 0.96 ! LA 0.98 MK 1.00* NL 0.94 OV 0.93 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 0.97 KP 1.00* ! LA 1.11 MK 1.00* NL 1.00* OV 0.93 ! PT 1.01 SC 0.58 ! ! ! Fit before self-cal, rms=0.252171Jy sigma=0.000702 ! Fit after self-cal, rms=0.167152Jy sigma=0.000682 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.112 mas, bmaj=5.705 mas, bpa=-87.34 degrees ! Estimated noise=956.668 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000619302 Jy ! Component: 100 - total flux cleaned = 0.000767929 Jy ! Component: 150 - total flux cleaned = 0.000898206 Jy ! Component: 200 - total flux cleaned = 0.00101119 Jy ! Total flux subtracted in 200 components = 0.00101119 Jy ! Clean residual min=-0.007772 max=0.007378 Jy/beam ! Clean residual mean=0.000156 rms=0.001893 Jy/beam ! Combined flux in latest and established models = 0.269559 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 25 components and 0.269559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167080Jy sigma=0.000681 ! Fit after self-cal, rms=0.167118Jy sigma=0.000681 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167118Jy sigma=0.000681 ! Fit after self-cal, rms=0.168575Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.108 mas, bmaj=5.68 mas, bpa=-88 degrees ! Estimated noise=961.004 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207222 Jy ! Component: 100 - total flux cleaned = 0.00297474 Jy ! Component: 150 - total flux cleaned = 0.00315506 Jy ! Component: 200 - total flux cleaned = 0.00329929 Jy ! Total flux subtracted in 200 components = 0.00329929 Jy ! Clean residual min=-0.002248 max=0.002538 Jy/beam ! Clean residual mean=-0.000004 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.272858 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 32 components and 0.272858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168545Jy sigma=0.000645 ! Fit after self-cal, rms=0.169609Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.98742e-05 Jy ! Component: 100 - total flux cleaned = 7.49829e-05 Jy ! Component: 150 - total flux cleaned = 0.000106155 Jy ! Component: 200 - total flux cleaned = 0.000106426 Jy ! Total flux subtracted in 200 components = 0.000106426 Jy ! Clean residual min=-0.002243 max=0.002470 Jy/beam ! Clean residual mean=-0.000001 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.272965 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.272965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169605Jy sigma=0.000645 ! Fit after self-cal, rms=0.169607Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169607Jy sigma=0.000645 ! Fit after self-cal, rms=0.170313Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.101 mas, bmaj=5.654 mas, bpa=-87.66 degrees ! Estimated noise=962.436 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144922 Jy ! Component: 100 - total flux cleaned = 0.00205009 Jy ! Component: 150 - total flux cleaned = 0.00217863 Jy ! Component: 200 - total flux cleaned = 0.00228231 Jy ! Total flux subtracted in 200 components = 0.00228231 Jy ! Clean residual min=-0.002164 max=0.002326 Jy/beam ! Clean residual mean=-0.000002 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.275247 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.275247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170294Jy sigma=0.000644 ! Fit after self-cal, rms=0.170317Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.8446e-05 Jy ! Component: 100 - total flux cleaned = 6.6788e-05 Jy ! Component: 150 - total flux cleaned = 6.614e-05 Jy ! Component: 200 - total flux cleaned = 5.43446e-05 Jy ! Total flux subtracted in 200 components = 5.43446e-05 Jy ! Clean residual min=-0.002171 max=0.002308 Jy/beam ! Clean residual mean=-0.000002 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.275302 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.275302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170312Jy sigma=0.000644 ! Fit after self-cal, rms=0.170314Jy sigma=0.000644 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170314Jy sigma=0.000644 ! Fit after self-cal, rms=0.170573Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.504 mas, bmaj=9.596 mas, bpa=80.88 degrees ! Estimated noise=1145.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106468 Jy ! Component: 100 - total flux cleaned = 0.00148016 Jy ! Component: 150 - total flux cleaned = 0.00161262 Jy ! Component: 200 - total flux cleaned = 0.00161744 Jy ! Total flux subtracted in 200 components = 0.00161744 Jy ! Clean residual min=-0.002423 max=0.002184 Jy/beam ! Clean residual mean=-0.000003 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.276919 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.276919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170565Jy sigma=0.000644 ! Fit after self-cal, rms=0.170576Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.44218e-05 Jy ! Component: 100 - total flux cleaned = 2.01525e-05 Jy ! Component: 150 - total flux cleaned = 1.1501e-05 Jy ! Component: 200 - total flux cleaned = 7.58559e-06 Jy ! Total flux subtracted in 200 components = 7.58559e-06 Jy ! Clean residual min=-0.002419 max=0.002185 Jy/beam ! Clean residual mean=-0.000003 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.276927 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 52 components and 0.276927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170576Jy sigma=0.000644 ! Fit after self-cal, rms=0.170576Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.097 mas, bmaj=5.635 mas, bpa=-87.37 degrees ! Estimated noise=963.822 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.097 x 5.635 at -87.37 degrees (North through East) ! Clean map min=-0.002066 max=0.26381 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.365 mas, bmaj=4.759 mas, bpa=-81.29 degrees ! Estimated noise=1523.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.203997 Jy ! Component: 100 - total flux cleaned = 0.249337 Jy ! Component: 150 - total flux cleaned = 0.263727 Jy ! Component: 200 - total flux cleaned = 0.269586 Jy ! Total flux subtracted in 200 components = 0.269586 Jy ! Clean residual min=-0.004491 max=0.003832 Jy/beam ! Clean residual mean=0.000000 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.269586 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.269586 Jy ! Inverting map and beam ! Estimated beam: bmin=5.097 mas, bmaj=5.635 mas, bpa=-87.37 degrees ! Estimated noise=963.822 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00381672 Jy ! Component: 100 - total flux cleaned = 0.00538688 Jy ! Component: 150 - total flux cleaned = 0.00617799 Jy ! Component: 200 - total flux cleaned = 0.00649035 Jy ! Total flux subtracted in 200 components = 0.00649035 Jy ! Clean residual min=-0.002089 max=0.002257 Jy/beam ! Clean residual mean=-0.000001 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.276077 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 45 components and 0.276077 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.504 mas, bmaj=9.596 mas, bpa=80.88 degrees ! Estimated noise=1145.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000368042 Jy ! Component: 100 - total flux cleaned = 0.00040507 Jy ! Component: 150 - total flux cleaned = 0.000436124 Jy ! Component: 200 - total flux cleaned = 0.000436939 Jy ! Total flux subtracted in 200 components = 0.000436939 Jy ! Clean residual min=-0.002454 max=0.002230 Jy/beam ! Clean residual mean=-0.000002 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.276514 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.84491e-06 Jy ! Component: 100 - total flux cleaned = 9.18195e-06 Jy ! Component: 150 - total flux cleaned = 9.49335e-06 Jy ! Component: 200 - total flux cleaned = 1.68166e-05 Jy ! Total flux subtracted in 200 components = 1.68166e-05 Jy ! Clean residual min=-0.002444 max=0.002226 Jy/beam ! Clean residual mean=-0.000002 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.276531 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 0.276531 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.097 mas, bmaj=5.635 mas, bpa=-87.37 degrees ! Estimated noise=963.822 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000134529 Jy ! Component: 100 - total flux cleaned = -0.000204396 Jy ! Component: 150 - total flux cleaned = -0.000262112 Jy ! Component: 200 - total flux cleaned = -0.000290176 Jy ! Total flux subtracted in 200 components = -0.000290176 Jy ! Clean residual min=-0.002102 max=0.002242 Jy/beam ! Clean residual mean=-0.000001 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.27624 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 66 components and 0.27624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170570Jy sigma=0.000644 ! Fit after self-cal, rms=0.170603Jy sigma=0.000644 wmodel J0747+7639_S_2017_01_16_pus_map.mod ! Writing 66 model components to file: J0747+7639_S_2017_01_16_pus_map.mod wobs J0747+7639_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0747+7639_S_2017_01_16_pus_uvs.fits wwins J0747+7639_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0747+7639_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000615831 Jy ! Component: 100 - total flux cleaned = 0.000918274 Jy ! Component: 150 - total flux cleaned = 0.00113458 Jy ! Component: 200 - total flux cleaned = 0.00116965 Jy ! Component: 250 - total flux cleaned = 0.00133939 Jy ! Component: 300 - total flux cleaned = 0.00140462 Jy ! Component: 350 - total flux cleaned = 0.00137247 Jy ! Component: 400 - total flux cleaned = 0.001467 Jy ! Component: 450 - total flux cleaned = 0.00155942 Jy ! Component: 500 - total flux cleaned = 0.00155972 Jy ! Component: 550 - total flux cleaned = 0.00161921 Jy ! Component: 600 - total flux cleaned = 0.00164778 Jy ! Component: 650 - total flux cleaned = 0.00164756 Jy ! Component: 700 - total flux cleaned = 0.00164688 Jy ! Component: 750 - total flux cleaned = 0.00156353 Jy ! Component: 800 - total flux cleaned = 0.00161807 Jy ! Component: 850 - total flux cleaned = 0.00161762 Jy ! Component: 900 - total flux cleaned = 0.00151114 Jy ! Component: 950 - total flux cleaned = 0.0014067 Jy ! Component: 1000 - total flux cleaned = 0.00135565 Jy ! Component: 1050 - total flux cleaned = 0.00122857 Jy ! Component: 1100 - total flux cleaned = 0.00110265 Jy ! Component: 1150 - total flux cleaned = 0.000880309 Jy ! Component: 1200 - total flux cleaned = 0.000733634 Jy ! Component: 1250 - total flux cleaned = 0.000661519 Jy ! Component: 1300 - total flux cleaned = 0.000471922 Jy ! Component: 1350 - total flux cleaned = 0.00042514 Jy ! Component: 1400 - total flux cleaned = 0.000355384 Jy ! Component: 1450 - total flux cleaned = 0.000194648 Jy ! Component: 1500 - total flux cleaned = 8.12899e-05 Jy ! Component: 1550 - total flux cleaned = -3.10403e-05 Jy ! Component: 1600 - total flux cleaned = -0.000119882 Jy ! Component: 1650 - total flux cleaned = -0.000230338 Jy ! Component: 1700 - total flux cleaned = -0.000273945 Jy ! Component: 1750 - total flux cleaned = -0.000531998 Jy ! Component: 1800 - total flux cleaned = -0.000638504 Jy ! Component: 1850 - total flux cleaned = -0.00078613 Jy ! Component: 1900 - total flux cleaned = -0.000848444 Jy ! Component: 1950 - total flux cleaned = -0.000910303 Jy ! Component: 2000 - total flux cleaned = -0.00105384 Jy ! Component: 2050 - total flux cleaned = -0.00115496 Jy ! Component: 2100 - total flux cleaned = -0.0012556 Jy ! Component: 2150 - total flux cleaned = -0.00139495 Jy ! Component: 2200 - total flux cleaned = -0.00151327 Jy ! Component: 2250 - total flux cleaned = -0.00163068 Jy ! Component: 2300 - total flux cleaned = -0.00174676 Jy ! Component: 2350 - total flux cleaned = -0.00193886 Jy ! Component: 2400 - total flux cleaned = -0.00203424 Jy ! Component: 2450 - total flux cleaned = -0.00222314 Jy ! Component: 2500 - total flux cleaned = -0.00233571 Jy ! Component: 2550 - total flux cleaned = -0.00248437 Jy ! Component: 2600 - total flux cleaned = -0.00259483 Jy ! Component: 2650 - total flux cleaned = -0.00272275 Jy ! Component: 2700 - total flux cleaned = -0.00286788 Jy ! Component: 2750 - total flux cleaned = -0.00299395 Jy ! Component: 2800 - total flux cleaned = -0.00310136 Jy ! Component: 2850 - total flux cleaned = -0.00322553 Jy ! Component: 2900 - total flux cleaned = -0.00331374 Jy ! Component: 2950 - total flux cleaned = -0.00338384 Jy ! Component: 3000 - total flux cleaned = -0.00348826 Jy ! Component: 3050 - total flux cleaned = -0.00366067 Jy ! Component: 3100 - total flux cleaned = -0.00367793 Jy ! Component: 3150 - total flux cleaned = -0.00379704 Jy ! Component: 3200 - total flux cleaned = -0.0039156 Jy ! Component: 3250 - total flux cleaned = -0.00401658 Jy ! Component: 3300 - total flux cleaned = -0.00409989 Jy ! Component: 3350 - total flux cleaned = -0.00423246 Jy ! Component: 3400 - total flux cleaned = -0.00434752 Jy ! Component: 3450 - total flux cleaned = -0.00446202 Jy ! Component: 3500 - total flux cleaned = -0.00455952 Jy ! Component: 3550 - total flux cleaned = -0.00465649 Jy ! Component: 3600 - total flux cleaned = -0.00473682 Jy ! Component: 3650 - total flux cleaned = -0.00481674 Jy ! Component: 3700 - total flux cleaned = -0.00495969 Jy ! Component: 3750 - total flux cleaned = -0.00510162 Jy ! Component: 3800 - total flux cleaned = -0.00522722 Jy ! Component: 3850 - total flux cleaned = -0.00530523 Jy ! Component: 3900 - total flux cleaned = -0.00539837 Jy ! Component: 3950 - total flux cleaned = -0.00550639 Jy ! Component: 4000 - total flux cleaned = -0.00559841 Jy ! Component: 4050 - total flux cleaned = -0.00570538 Jy ! Total flux subtracted in 4096 components = -0.00579661 Jy ! Clean residual min=-0.001032 max=0.001227 Jy/beam ! Clean residual mean=-0.000003 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.270444 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 374 components and 0.270444 Jy ![Exited script file: muppet] wmap "J0747+7639_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.097 x 5.635 at -87.37 degrees (North through East) ! Clean map min=-0.0013975 max=0.2638 Jy/beam ! Writing clean map to FITS file: J0747+7639_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.263805 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000284923 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.324015 0.324015 0.64803 1.29606 2.59212 5.18424 10.3685 20.737 41.4739 82.9479 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.263 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.097 x 5.635 at -87.37 degrees (North through East) ! Clean map min=-0.0013975 max=0.2638 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0747+7639_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:08:21 2019