! Started logfile: J0746+1807_S_2017_10_09_pus_uvs.log on Sun May 12 13:07:18 2019 obs J0746+1807_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0746+1807_S_2017_10_09_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.764645 visibilities/baseline/integration-bin. ! Found source: J0746+1807 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 32372 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0746+1807_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 316 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 492 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 316 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1469 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.915723Jy sigma=0.008479 ! Fit after self-cal, rms=0.876845Jy sigma=0.008142 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.73 mas, bmaj=10.15 mas, bpa=-19.23 degrees ! Estimated noise=1081.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0945933 Jy ! Component: 100 - total flux cleaned = 0.116292 Jy ! Total flux subtracted in 100 components = 0.116292 Jy ! Clean residual min=-0.005265 max=0.008232 Jy/beam ! Clean residual mean=-0.000014 rms=0.001429 Jy/beam ! Combined flux in latest and established models = 0.116292 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.116292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081980Jy sigma=0.000677 ! Fit after self-cal, rms=0.081955Jy sigma=0.000677 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=10.53 mas, bpa=-19.03 degrees ! Estimated noise=494.511 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103034 Jy ! Component: 100 - total flux cleaned = 0.0146491 Jy ! Component: 150 - total flux cleaned = 0.0172974 Jy ! Component: 200 - total flux cleaned = 0.0191168 Jy ! Total flux subtracted in 200 components = 0.0191168 Jy ! Clean residual min=-0.003443 max=0.002547 Jy/beam ! Clean residual mean=-0.000008 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.135409 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 33 components and 0.135409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080547Jy sigma=0.000667 ! Fit after self-cal, rms=0.080506Jy sigma=0.000667 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.99 KP 1.08 ! LA 1.02 MK 1.00 NL 0.90 OV 1.00* ! PT 1.03 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.05 HN 1.03 KP 1.04 ! LA 0.99 MK 1.01 NL 0.93 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.06 HN 1.02 KP 0.91 ! LA 0.79 MK 1.03 NL 1.07 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 4. ! A total of 258 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 0.99 KP 1.00* ! LA 0.78 MK 1.06 NL 1.00* OV 1.00* ! PT 1.02 ! ! ! Fit before self-cal, rms=0.080506Jy sigma=0.000667 ! Fit after self-cal, rms=0.077847Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.414 mas, bmaj=10.59 mas, bpa=-18.94 degrees ! Estimated noise=495.284 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000690002 Jy ! Component: 100 - total flux cleaned = 0.000780146 Jy ! Component: 150 - total flux cleaned = 0.000830805 Jy ! Component: 200 - total flux cleaned = 0.000857637 Jy ! Total flux subtracted in 200 components = 0.000857637 Jy ! Clean residual min=-0.001822 max=0.001877 Jy/beam ! Clean residual mean=0.000003 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.136267 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.136267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077827Jy sigma=0.000659 ! Fit after self-cal, rms=0.077792Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077792Jy sigma=0.000659 ! Fit after self-cal, rms=0.077923Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.415 mas, bmaj=10.6 mas, bpa=-18.95 degrees ! Estimated noise=495.143 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.16058e-05 Jy ! Component: 100 - total flux cleaned = 3.33872e-05 Jy ! Component: 150 - total flux cleaned = 1.02024e-05 Jy ! Component: 200 - total flux cleaned = -1.95326e-05 Jy ! Total flux subtracted in 200 components = -1.95326e-05 Jy ! Clean residual min=-0.001562 max=0.001778 Jy/beam ! Clean residual mean=0.000000 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.136247 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.136247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077917Jy sigma=0.000657 ! Fit after self-cal, rms=0.077927Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16, -111.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182542 Jy ! Component: 100 - total flux cleaned = 0.00293689 Jy ! Component: 150 - total flux cleaned = 0.00373276 Jy ! Component: 200 - total flux cleaned = 0.004354 Jy ! Total flux subtracted in 200 components = 0.004354 Jy ! Clean residual min=-0.001310 max=0.001265 Jy/beam ! Clean residual mean=-0.000001 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.140601 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 95 components and 0.140601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077880Jy sigma=0.000657 ! Fit after self-cal, rms=0.077875Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077875Jy sigma=0.000657 ! Fit after self-cal, rms=0.077866Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.414 mas, bmaj=10.61 mas, bpa=-18.96 degrees ! Estimated noise=494.266 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000730483 Jy ! Component: 100 - total flux cleaned = 0.00128355 Jy ! Component: 150 - total flux cleaned = 0.00175082 Jy ! Component: 200 - total flux cleaned = 0.00215515 Jy ! Total flux subtracted in 200 components = 0.00215515 Jy ! Clean residual min=-0.001300 max=0.001260 Jy/beam ! Clean residual mean=0.000001 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.142756 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 125 components and 0.142756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077856Jy sigma=0.000656 ! Fit after self-cal, rms=0.077860Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000421448 Jy ! Component: 100 - total flux cleaned = 0.000771466 Jy ! Component: 150 - total flux cleaned = 0.00108099 Jy ! Component: 200 - total flux cleaned = 0.00135778 Jy ! Total flux subtracted in 200 components = 0.00135778 Jy ! Clean residual min=-0.001282 max=0.001257 Jy/beam ! Clean residual mean=0.000002 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.144114 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 137 components and 0.144114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077856Jy sigma=0.000656 ! Fit after self-cal, rms=0.077855Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077855Jy sigma=0.000656 ! Fit after self-cal, rms=0.077882Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.387 mas, bmaj=11.55 mas, bpa=-19.81 degrees ! Estimated noise=607.234 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000665822 Jy ! Component: 100 - total flux cleaned = 0.00109005 Jy ! Component: 150 - total flux cleaned = 0.00143729 Jy ! Component: 200 - total flux cleaned = 0.00170963 Jy ! Total flux subtracted in 200 components = 0.00170963 Jy ! Clean residual min=-0.001299 max=0.001369 Jy/beam ! Clean residual mean=0.000005 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.145824 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 152 components and 0.145824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077879Jy sigma=0.000656 ! Fit after self-cal, rms=0.077880Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000349415 Jy ! Component: 100 - total flux cleaned = 0.000609406 Jy ! Component: 150 - total flux cleaned = 0.000776506 Jy ! Component: 200 - total flux cleaned = 0.000923284 Jy ! Total flux subtracted in 200 components = 0.000923284 Jy ! Clean residual min=-0.001291 max=0.001350 Jy/beam ! Clean residual mean=0.000006 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.146747 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 161 components and 0.146747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077879Jy sigma=0.000656 ! Fit after self-cal, rms=0.077878Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.413 mas, bmaj=10.61 mas, bpa=-18.97 degrees ! Estimated noise=494.129 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.413 x 10.61 at -18.97 degrees (North through East) ! Clean map min=-0.0011938 max=0.12377 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.758 mas, bmaj=10.19 mas, bpa=-19.33 degrees ! Estimated noise=1081.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0936257 Jy ! Component: 100 - total flux cleaned = 0.11486 Jy ! Component: 150 - total flux cleaned = 0.123089 Jy ! Component: 200 - total flux cleaned = 0.127434 Jy ! Total flux subtracted in 200 components = 0.127434 Jy ! Clean residual min=-0.002926 max=0.002985 Jy/beam ! Clean residual mean=-0.000004 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.127434 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.127434 Jy ! Inverting map and beam ! Estimated beam: bmin=3.413 mas, bmaj=10.61 mas, bpa=-18.97 degrees ! Estimated noise=494.129 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00382077 Jy ! Component: 100 - total flux cleaned = 0.00615509 Jy ! Component: 150 - total flux cleaned = 0.00796653 Jy ! Component: 200 - total flux cleaned = 0.00943839 Jy ! Total flux subtracted in 200 components = 0.00943839 Jy ! Clean residual min=-0.001569 max=0.001343 Jy/beam ! Clean residual mean=-0.000003 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.136872 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 44 components and 0.136872 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.387 mas, bmaj=11.55 mas, bpa=-19.81 degrees ! Estimated noise=607.234 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186218 Jy ! Component: 100 - total flux cleaned = 0.00330717 Jy ! Component: 150 - total flux cleaned = 0.00447428 Jy ! Component: 200 - total flux cleaned = 0.00543295 Jy ! Total flux subtracted in 200 components = 0.00543295 Jy ! Clean residual min=-0.001504 max=0.001489 Jy/beam ! Clean residual mean=0.000000 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.142305 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000798555 Jy ! Component: 100 - total flux cleaned = 0.00147054 Jy ! Component: 150 - total flux cleaned = 0.00203998 Jy ! Component: 200 - total flux cleaned = 0.00252731 Jy ! Total flux subtracted in 200 components = 0.00252731 Jy ! Clean residual min=-0.001306 max=0.001469 Jy/beam ! Clean residual mean=0.000002 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.144832 Jy ! Adding 103 model components to the UV plane model. ! The established model now contains 145 components and 0.144832 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.413 mas, bmaj=10.61 mas, bpa=-18.97 degrees ! Estimated noise=494.129 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000464091 Jy ! Component: 100 - total flux cleaned = 0.000680409 Jy ! Component: 150 - total flux cleaned = 0.000901868 Jy ! Component: 200 - total flux cleaned = 0.0010323 Jy ! Total flux subtracted in 200 components = 0.0010323 Jy ! Clean residual min=-0.001220 max=0.001267 Jy/beam ! Clean residual mean=0.000002 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.145865 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 162 components and 0.145865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077886Jy sigma=0.000656 ! Fit after self-cal, rms=0.077884Jy sigma=0.000656 wmodel J0746+1807_S_2017_10_09_pus_map.mod ! Writing 162 model components to file: J0746+1807_S_2017_10_09_pus_map.mod wobs J0746+1807_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0746+1807_S_2017_10_09_pus_uvs.fits wwins J0746+1807_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J0746+1807_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000484162 Jy ! Component: 100 - total flux cleaned = 0.000503625 Jy ! Component: 150 - total flux cleaned = 0.00050378 Jy ! Component: 200 - total flux cleaned = 0.000417371 Jy ! Component: 250 - total flux cleaned = 0.000384516 Jy ! Component: 300 - total flux cleaned = 0.000320364 Jy ! Component: 350 - total flux cleaned = 0.000212244 Jy ! Component: 400 - total flux cleaned = 0.000137714 Jy ! Component: 450 - total flux cleaned = 6.50473e-05 Jy ! Component: 500 - total flux cleaned = -1.9496e-05 Jy ! Component: 550 - total flux cleaned = -0.000115244 Jy ! Component: 600 - total flux cleaned = -0.00018177 Jy ! Component: 650 - total flux cleaned = -0.000246817 Jy ! Component: 700 - total flux cleaned = -0.000335724 Jy ! Component: 750 - total flux cleaned = -0.000385249 Jy ! Component: 800 - total flux cleaned = -0.00044574 Jy ! Component: 850 - total flux cleaned = -0.000481362 Jy ! Component: 900 - total flux cleaned = -0.000550414 Jy ! Component: 950 - total flux cleaned = -0.00057273 Jy ! Component: 1000 - total flux cleaned = -0.000583843 Jy ! Component: 1050 - total flux cleaned = -0.000605591 Jy ! Component: 1100 - total flux cleaned = -0.000626865 Jy ! Component: 1150 - total flux cleaned = -0.000626916 Jy ! Component: 1200 - total flux cleaned = -0.000657441 Jy ! Component: 1250 - total flux cleaned = -0.000677302 Jy ! Component: 1300 - total flux cleaned = -0.00068711 Jy ! Component: 1350 - total flux cleaned = -0.000715815 Jy ! Component: 1400 - total flux cleaned = -0.000753409 Jy ! Component: 1450 - total flux cleaned = -0.000771985 Jy ! Component: 1500 - total flux cleaned = -0.000826872 Jy ! Component: 1550 - total flux cleaned = -0.000889941 Jy ! Component: 1600 - total flux cleaned = -0.00094296 Jy ! Component: 1650 - total flux cleaned = -0.000986594 Jy ! Component: 1700 - total flux cleaned = -0.00104682 Jy ! Component: 1750 - total flux cleaned = -0.00106391 Jy ! Component: 1800 - total flux cleaned = -0.00108894 Jy ! Component: 1850 - total flux cleaned = -0.00112204 Jy ! Component: 1900 - total flux cleaned = -0.00114641 Jy ! Component: 1950 - total flux cleaned = -0.00113037 Jy ! Component: 2000 - total flux cleaned = -0.00113043 Jy ! Component: 2050 - total flux cleaned = -0.00116971 Jy ! Component: 2100 - total flux cleaned = -0.00116193 Jy ! Component: 2150 - total flux cleaned = -0.00115433 Jy ! Component: 2200 - total flux cleaned = -0.00113172 Jy ! Component: 2250 - total flux cleaned = -0.00115443 Jy ! Component: 2300 - total flux cleaned = -0.00114704 Jy ! Component: 2350 - total flux cleaned = -0.00114713 Jy ! Component: 2400 - total flux cleaned = -0.0011617 Jy ! Component: 2450 - total flux cleaned = -0.00114001 Jy ! Component: 2500 - total flux cleaned = -0.00113295 Jy ! Component: 2550 - total flux cleaned = -0.00112589 Jy ! Component: 2600 - total flux cleaned = -0.00111188 Jy ! Component: 2650 - total flux cleaned = -0.00108429 Jy ! Component: 2700 - total flux cleaned = -0.00111169 Jy ! Component: 2750 - total flux cleaned = -0.00109138 Jy ! Component: 2800 - total flux cleaned = -0.00105787 Jy ! Component: 2850 - total flux cleaned = -0.00107783 Jy ! Component: 2900 - total flux cleaned = -0.00107118 Jy ! Component: 2950 - total flux cleaned = -0.00103861 Jy ! Component: 3000 - total flux cleaned = -0.00104518 Jy ! Component: 3050 - total flux cleaned = -0.00102596 Jy ! Component: 3100 - total flux cleaned = -0.00102594 Jy ! Component: 3150 - total flux cleaned = -0.00100706 Jy ! Component: 3200 - total flux cleaned = -0.000994475 Jy ! Component: 3250 - total flux cleaned = -0.000963447 Jy ! Component: 3300 - total flux cleaned = -0.000945032 Jy ! Component: 3350 - total flux cleaned = -0.000926791 Jy ! Component: 3400 - total flux cleaned = -0.000902488 Jy ! Component: 3450 - total flux cleaned = -0.000902431 Jy ! Component: 3500 - total flux cleaned = -0.000884426 Jy ! Component: 3550 - total flux cleaned = -0.000825125 Jy ! Component: 3600 - total flux cleaned = -0.000825141 Jy ! Component: 3650 - total flux cleaned = -0.00081339 Jy ! Component: 3700 - total flux cleaned = -0.000784343 Jy ! Component: 3750 - total flux cleaned = -0.000749707 Jy ! Component: 3800 - total flux cleaned = -0.000744042 Jy ! Component: 3850 - total flux cleaned = -0.000738347 Jy ! Component: 3900 - total flux cleaned = -0.000721403 Jy ! Component: 3950 - total flux cleaned = -0.000687705 Jy ! Component: 4000 - total flux cleaned = -0.000687733 Jy ! Component: 4050 - total flux cleaned = -0.000682123 Jy ! Total flux subtracted in 4096 components = -0.000659999 Jy ! Clean residual min=-0.000369 max=0.000355 Jy/beam ! Clean residual mean=0.000001 rms=0.000103 Jy/beam ! Combined flux in latest and established models = 0.145205 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 462 components and 0.145205 Jy ![Exited script file: muppet] wmap "J0746+1807_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.413 x 10.61 at -18.97 degrees (North through East) ! Clean map min=-0.0012033 max=0.12373 Jy/beam ! Writing clean map to FITS file: J0746+1807_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.123727 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000100418 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.243483 0.243483 0.486967 0.973933 1.94787 3.89573 7.79146 15.5829 31.1659 62.3317 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.123 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.413 x 10.61 at -18.97 degrees (North through East) ! Clean map min=-0.0012033 max=0.12373 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0746+1807_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:07:25 2019