! Started logfile: J0746+1807_S_2017_09_26_pus_uvs.log on Sat May 11 12:57:40 2019 obs J0746+1807_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0746+1807_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.767385 visibilities/baseline/integration-bin. ! Found source: J0746+1807 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 32488 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0746+1807_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 311 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 340 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 311 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1371 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.919999Jy sigma=0.008219 ! Fit after self-cal, rms=0.889974Jy sigma=0.007946 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=8.784 mas, bpa=-23.59 degrees ! Estimated noise=890.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0861458 Jy ! Component: 100 - total flux cleaned = 0.105746 Jy ! Total flux subtracted in 100 components = 0.105746 Jy ! Clean residual min=-0.004831 max=0.007016 Jy/beam ! Clean residual mean=-0.000023 rms=0.001334 Jy/beam ! Combined flux in latest and established models = 0.105746 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.105746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082859Jy sigma=0.000687 ! Fit after self-cal, rms=0.082849Jy sigma=0.000687 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.992 mas, bmaj=9.952 mas, bpa=-22.71 degrees ! Estimated noise=495.417 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0086428 Jy ! Component: 100 - total flux cleaned = 0.012204 Jy ! Component: 150 - total flux cleaned = 0.0141509 Jy ! Component: 200 - total flux cleaned = 0.0146889 Jy ! Total flux subtracted in 200 components = 0.0146889 Jy ! Clean residual min=-0.003379 max=0.004235 Jy/beam ! Clean residual mean=-0.000029 rms=0.001029 Jy/beam ! Combined flux in latest and established models = 0.120435 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 34 components and 0.120435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081991Jy sigma=0.000679 ! Fit after self-cal, rms=0.081985Jy sigma=0.000679 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 0.95 KP 1.02 ! LA 1.00 MK 1.05 NL 0.89 OV 1.00 ! PT 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 1.00* HN 0.97 KP 1.00 ! LA 0.97 MK 1.03 NL 1.08 OV 0.98 ! PT 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.97 KP 1.00 ! LA 0.98 MK 1.08 NL 1.08 OV 0.95 ! PT 0.96 ! ! ! Correcting IF 4. ! A total of 111 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.96 KP 1.00* ! LA 0.99 MK 1.12 NL 1.00* OV 0.66 ! PT 1.02 ! ! ! Fit before self-cal, rms=0.081985Jy sigma=0.000679 ! Fit after self-cal, rms=0.081422Jy sigma=0.000671 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.043 mas, bmaj=10.07 mas, bpa=-22.07 degrees ! Estimated noise=496.384 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000988771 Jy ! Component: 100 - total flux cleaned = -0.00111451 Jy ! Component: 150 - total flux cleaned = -0.0012451 Jy ! Component: 200 - total flux cleaned = -0.00129034 Jy ! Total flux subtracted in 200 components = -0.00129034 Jy ! Clean residual min=-0.002729 max=0.003667 Jy/beam ! Clean residual mean=-0.000024 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.119145 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 46 components and 0.119145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081381Jy sigma=0.000671 ! Fit after self-cal, rms=0.081416Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081416Jy sigma=0.000671 ! Fit after self-cal, rms=0.083834Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.046 mas, bmaj=10.09 mas, bpa=-22.01 degrees ! Estimated noise=495.667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000418045 Jy ! Component: 100 - total flux cleaned = 0.000394494 Jy ! Component: 150 - total flux cleaned = 0.000332153 Jy ! Component: 200 - total flux cleaned = 0.000297589 Jy ! Total flux subtracted in 200 components = 0.000297589 Jy ! Clean residual min=-0.001690 max=0.001793 Jy/beam ! Clean residual mean=-0.000009 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.119442 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 58 components and 0.119442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083820Jy sigma=0.000663 ! Fit after self-cal, rms=0.083947Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.51076e-05 Jy ! Component: 100 - total flux cleaned = -1.87886e-05 Jy ! Component: 150 - total flux cleaned = -5.81754e-05 Jy ! Component: 200 - total flux cleaned = -8.21774e-05 Jy ! Total flux subtracted in 200 components = -8.21774e-05 Jy ! Clean residual min=-0.001691 max=0.001779 Jy/beam ! Clean residual mean=-0.000010 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.11936 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 63 components and 0.11936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083943Jy sigma=0.000662 ! Fit after self-cal, rms=0.083942Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083942Jy sigma=0.000662 ! Fit after self-cal, rms=0.084441Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.045 mas, bmaj=10.1 mas, bpa=-22.11 degrees ! Estimated noise=496.168 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.26533e-06 Jy ! Component: 100 - total flux cleaned = -1.72258e-05 Jy ! Component: 150 - total flux cleaned = -4.09535e-05 Jy ! Component: 200 - total flux cleaned = -6.26136e-05 Jy ! Total flux subtracted in 200 components = -6.26136e-05 Jy ! Clean residual min=-0.001656 max=0.001717 Jy/beam ! Clean residual mean=-0.000009 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.119298 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 69 components and 0.119298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084438Jy sigma=0.000662 ! Fit after self-cal, rms=0.084443Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.55462e-05 Jy ! Component: 100 - total flux cleaned = 2.6079e-05 Jy ! Component: 150 - total flux cleaned = 1.70134e-05 Jy ! Component: 200 - total flux cleaned = 8.62361e-06 Jy ! Total flux subtracted in 200 components = 8.62361e-06 Jy ! Clean residual min=-0.001648 max=0.001724 Jy/beam ! Clean residual mean=-0.000009 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.119306 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 71 components and 0.119306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084441Jy sigma=0.000662 ! Fit after self-cal, rms=0.084440Jy sigma=0.000662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084440Jy sigma=0.000662 ! Fit after self-cal, rms=0.084571Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.636 mas, bmaj=12.05 mas, bpa=-18.25 degrees ! Estimated noise=571.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.54855e-05 Jy ! Component: 100 - total flux cleaned = -9.74227e-05 Jy ! Component: 150 - total flux cleaned = -0.000105752 Jy ! Component: 200 - total flux cleaned = -0.000112552 Jy ! Total flux subtracted in 200 components = -0.000112552 Jy ! Clean residual min=-0.002210 max=0.002041 Jy/beam ! Clean residual mean=-0.000016 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.119194 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 77 components and 0.119194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084570Jy sigma=0.000662 ! Fit after self-cal, rms=0.084570Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.15636e-07 Jy ! Component: 100 - total flux cleaned = 6.57913e-07 Jy ! Component: 150 - total flux cleaned = -8.80106e-06 Jy ! Component: 200 - total flux cleaned = -8.75878e-06 Jy ! Total flux subtracted in 200 components = -8.75878e-06 Jy ! Clean residual min=-0.002218 max=0.002033 Jy/beam ! Clean residual mean=-0.000016 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.119185 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 84 components and 0.119185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084570Jy sigma=0.000662 ! Fit after self-cal, rms=0.084570Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.046 mas, bmaj=10.1 mas, bpa=-22.16 degrees ! Estimated noise=496.358 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.046 x 10.1 at -22.16 degrees (North through East) ! Clean map min=-0.0016101 max=0.11209 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.263 mas, bmaj=8.805 mas, bpa=-23.52 degrees ! Estimated noise=896.782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0862096 Jy ! Component: 100 - total flux cleaned = 0.105873 Jy ! Component: 150 - total flux cleaned = 0.112807 Jy ! Component: 200 - total flux cleaned = 0.115881 Jy ! Total flux subtracted in 200 components = 0.115881 Jy ! Clean residual min=-0.002708 max=0.002359 Jy/beam ! Clean residual mean=-0.000007 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.115881 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.115881 Jy ! Inverting map and beam ! Estimated beam: bmin=4.046 mas, bmaj=10.1 mas, bpa=-22.16 degrees ! Estimated noise=496.358 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217697 Jy ! Component: 100 - total flux cleaned = 0.00283317 Jy ! Component: 150 - total flux cleaned = 0.00311976 Jy ! Component: 200 - total flux cleaned = 0.00325965 Jy ! Total flux subtracted in 200 components = 0.00325965 Jy ! Clean residual min=-0.001761 max=0.001686 Jy/beam ! Clean residual mean=-0.000009 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.11914 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 36 components and 0.11914 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.636 mas, bmaj=12.05 mas, bpa=-18.25 degrees ! Estimated noise=571.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000283202 Jy ! Component: 100 - total flux cleaned = 0.000294613 Jy ! Component: 150 - total flux cleaned = 0.000276175 Jy ! Component: 200 - total flux cleaned = 0.000259465 Jy ! Total flux subtracted in 200 components = 0.000259465 Jy ! Clean residual min=-0.002163 max=0.002008 Jy/beam ! Clean residual mean=-0.000015 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.1194 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.47862e-05 Jy ! Component: 100 - total flux cleaned = -3.44726e-05 Jy ! Component: 150 - total flux cleaned = -4.04588e-05 Jy ! Component: 200 - total flux cleaned = -5.66907e-05 Jy ! Total flux subtracted in 200 components = -5.66907e-05 Jy ! Clean residual min=-0.002170 max=0.002019 Jy/beam ! Clean residual mean=-0.000016 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.119343 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.119343 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.046 mas, bmaj=10.1 mas, bpa=-22.16 degrees ! Estimated noise=496.358 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101019 Jy ! Component: 100 - total flux cleaned = 0.000101591 Jy ! Component: 150 - total flux cleaned = 7.44828e-05 Jy ! Component: 200 - total flux cleaned = 6.1763e-05 Jy ! Total flux subtracted in 200 components = 6.1763e-05 Jy ! Clean residual min=-0.001710 max=0.001704 Jy/beam ! Clean residual mean=-0.000009 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.119405 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 57 components and 0.119405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084573Jy sigma=0.000662 ! Fit after self-cal, rms=0.084571Jy sigma=0.000662 wmodel J0746+1807_S_2017_09_26_pus_map.mod ! Writing 57 model components to file: J0746+1807_S_2017_09_26_pus_map.mod wobs J0746+1807_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0746+1807_S_2017_09_26_pus_uvs.fits wwins J0746+1807_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J0746+1807_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244862 Jy ! Component: 100 - total flux cleaned = 0.000276985 Jy ! Component: 150 - total flux cleaned = 8.32213e-05 Jy ! Component: 200 - total flux cleaned = -9.97702e-05 Jy ! Component: 250 - total flux cleaned = -0.00014325 Jy ! Component: 300 - total flux cleaned = -0.000225403 Jy ! Component: 350 - total flux cleaned = -0.000283954 Jy ! Component: 400 - total flux cleaned = -0.000359707 Jy ! Component: 450 - total flux cleaned = -0.000323107 Jy ! Component: 500 - total flux cleaned = -0.000252169 Jy ! Component: 550 - total flux cleaned = -0.000218089 Jy ! Component: 600 - total flux cleaned = -0.000168517 Jy ! Component: 650 - total flux cleaned = -0.000152738 Jy ! Component: 700 - total flux cleaned = -0.000199642 Jy ! Component: 750 - total flux cleaned = -0.000199703 Jy ! Component: 800 - total flux cleaned = -0.000199584 Jy ! Component: 850 - total flux cleaned = -0.000228342 Jy ! Component: 900 - total flux cleaned = -0.000269963 Jy ! Component: 950 - total flux cleaned = -0.000297153 Jy ! Component: 1000 - total flux cleaned = -0.000350669 Jy ! Component: 1050 - total flux cleaned = -0.000416352 Jy ! Component: 1100 - total flux cleaned = -0.000519191 Jy ! Component: 1150 - total flux cleaned = -0.000569719 Jy ! Component: 1200 - total flux cleaned = -0.000643842 Jy ! Component: 1250 - total flux cleaned = -0.000704358 Jy ! Component: 1300 - total flux cleaned = -0.000763694 Jy ! Component: 1350 - total flux cleaned = -0.000821854 Jy ! Component: 1400 - total flux cleaned = -0.000867336 Jy ! Component: 1450 - total flux cleaned = -0.000889942 Jy ! Component: 1500 - total flux cleaned = -0.000967289 Jy ! Component: 1550 - total flux cleaned = -0.000978196 Jy ! Component: 1600 - total flux cleaned = -0.00101043 Jy ! Component: 1650 - total flux cleaned = -0.00104193 Jy ! Component: 1700 - total flux cleaned = -0.00102117 Jy ! Component: 1750 - total flux cleaned = -0.00105203 Jy ! Component: 1800 - total flux cleaned = -0.00104192 Jy ! Component: 1850 - total flux cleaned = -0.00101214 Jy ! Component: 1900 - total flux cleaned = -0.00101238 Jy ! Component: 1950 - total flux cleaned = -0.000993024 Jy ! Component: 2000 - total flux cleaned = -0.00100275 Jy ! Component: 2050 - total flux cleaned = -0.00104074 Jy ! Component: 2100 - total flux cleaned = -0.00104997 Jy ! Component: 2150 - total flux cleaned = -0.00104986 Jy ! Component: 2200 - total flux cleaned = -0.00106823 Jy ! Component: 2250 - total flux cleaned = -0.00111372 Jy ! Component: 2300 - total flux cleaned = -0.00114059 Jy ! Component: 2350 - total flux cleaned = -0.00113166 Jy ! Component: 2400 - total flux cleaned = -0.00114938 Jy ! Component: 2450 - total flux cleaned = -0.00116689 Jy ! Component: 2500 - total flux cleaned = -0.00120141 Jy ! Component: 2550 - total flux cleaned = -0.00118425 Jy ! Component: 2600 - total flux cleaned = -0.00119274 Jy ! Component: 2650 - total flux cleaned = -0.00118437 Jy ! Component: 2700 - total flux cleaned = -0.00120939 Jy ! Component: 2750 - total flux cleaned = -0.00118464 Jy ! Component: 2800 - total flux cleaned = -0.00121745 Jy ! Component: 2850 - total flux cleaned = -0.00120928 Jy ! Component: 2900 - total flux cleaned = -0.0011852 Jy ! Component: 2950 - total flux cleaned = -0.00118512 Jy ! Component: 3000 - total flux cleaned = -0.00117726 Jy ! Component: 3050 - total flux cleaned = -0.00116939 Jy ! Component: 3100 - total flux cleaned = -0.00116159 Jy ! Component: 3150 - total flux cleaned = -0.00114611 Jy ! Component: 3200 - total flux cleaned = -0.00116149 Jy ! Component: 3250 - total flux cleaned = -0.00115384 Jy ! Component: 3300 - total flux cleaned = -0.00114632 Jy ! Component: 3350 - total flux cleaned = -0.00113888 Jy ! Component: 3400 - total flux cleaned = -0.00115381 Jy ! Component: 3450 - total flux cleaned = -0.00116857 Jy ! Component: 3500 - total flux cleaned = -0.00113918 Jy ! Component: 3550 - total flux cleaned = -0.00115382 Jy ! Component: 3600 - total flux cleaned = -0.00115382 Jy ! Component: 3650 - total flux cleaned = -0.0011394 Jy ! Component: 3700 - total flux cleaned = -0.00113945 Jy ! Component: 3750 - total flux cleaned = -0.0011538 Jy ! Component: 3800 - total flux cleaned = -0.00114666 Jy ! Component: 3850 - total flux cleaned = -0.00112543 Jy ! Component: 3900 - total flux cleaned = -0.00115366 Jy ! Component: 3950 - total flux cleaned = -0.00115364 Jy ! Component: 4000 - total flux cleaned = -0.00114667 Jy ! Component: 4050 - total flux cleaned = -0.00117448 Jy ! Total flux subtracted in 4096 components = -0.00114676 Jy ! Clean residual min=-0.000427 max=0.000425 Jy/beam ! Clean residual mean=0.000003 rms=0.000128 Jy/beam ! Combined flux in latest and established models = 0.118258 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 343 components and 0.118258 Jy ![Exited script file: muppet] wmap "J0746+1807_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.046 x 10.1 at -22.16 degrees (North through East) ! Clean map min=-0.0011268 max=0.11222 Jy/beam ! Writing clean map to FITS file: J0746+1807_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.112219 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000124845 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.333755 0.333755 0.667511 1.33502 2.67004 5.34009 10.6802 21.3603 42.7207 85.4414 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.112 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.046 x 10.1 at -22.16 degrees (North through East) ! Clean map min=-0.0011268 max=0.11222 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0746+1807_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:57:47 2019