! Started logfile: J0745-0044_S_2017_01_21_pus_uvs.log on Sun May 5 15:49:44 2019 obs J0745-0044_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0745-0044_S_2017_01_21_pus_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.666667 visibilities/baseline/integration-bin. ! Found source: J0745-0044 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 768 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0745-0044_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.226615Jy sigma=0.001690 ! Fit after self-cal, rms=0.210058Jy sigma=0.001574 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.739 mas, bmaj=6.846 mas, bpa=-7.93 degrees ! Estimated noise=4301.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.837811 Jy ! Component: 100 - total flux cleaned = 1.0578 Jy ! Total flux subtracted in 100 components = 1.0578 Jy ! Clean residual min=-0.035595 max=0.088782 Jy/beam ! Clean residual mean=-0.000051 rms=0.015449 Jy/beam ! Combined flux in latest and established models = 1.0578 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.0578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163991Jy sigma=0.001228 ! Fit after self-cal, rms=0.163977Jy sigma=0.001228 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.1 mas, bmaj=7.165 mas, bpa=-5.172 degrees ! Estimated noise=3683.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0930898 Jy ! Component: 100 - total flux cleaned = 0.127712 Jy ! Component: 150 - total flux cleaned = 0.143704 Jy ! Component: 200 - total flux cleaned = 0.149406 Jy ! Total flux subtracted in 200 components = 0.149406 Jy ! Clean residual min=-0.022920 max=0.030964 Jy/beam ! Clean residual mean=-0.000041 rms=0.006335 Jy/beam ! Combined flux in latest and established models = 1.20721 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 22 components and 1.20721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114930Jy sigma=0.000801 ! Fit after self-cal, rms=0.114651Jy sigma=0.000799 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 0.94 LA 1.03 ! MK 0.99 NL 1.00 OV 1.00 PT 1.00 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 0.99 LA 0.99 ! MK 0.95 NL 1.01 OV 1.04 PT 0.98 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 0.97 LA 1.00 ! MK 0.99 NL 1.02 OV 0.94 PT 0.95 ! SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 0.95 LA 0.99 ! MK 1.22 NL 1.00* OV 0.97 PT 0.96 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.114651Jy sigma=0.000799 ! Fit after self-cal, rms=0.094118Jy sigma=0.000641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=7.173 mas, bpa=-4.844 degrees ! Estimated noise=3678.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135263 Jy ! Component: 100 - total flux cleaned = 0.0130384 Jy ! Component: 150 - total flux cleaned = 0.0121589 Jy ! Component: 200 - total flux cleaned = 0.0123462 Jy ! Total flux subtracted in 200 components = 0.0123462 Jy ! Clean residual min=-0.007382 max=0.007861 Jy/beam ! Clean residual mean=-0.000006 rms=0.001926 Jy/beam ! Combined flux in latest and established models = 1.21955 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 42 components and 1.21955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091319Jy sigma=0.000623 ! Fit after self-cal, rms=0.091385Jy sigma=0.000622 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091385Jy sigma=0.000622 ! Fit after self-cal, rms=0.091220Jy sigma=0.000621 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=7.17 mas, bpa=-4.809 degrees ! Estimated noise=3672.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00374025 Jy ! Component: 100 - total flux cleaned = 0.00318762 Jy ! Component: 150 - total flux cleaned = 0.00271965 Jy ! Component: 200 - total flux cleaned = 0.00251746 Jy ! Total flux subtracted in 200 components = 0.00251746 Jy ! Clean residual min=-0.006674 max=0.007854 Jy/beam ! Clean residual mean=-0.000004 rms=0.001674 Jy/beam ! Combined flux in latest and established models = 1.22207 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 54 components and 1.22207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090685Jy sigma=0.000618 ! Fit after self-cal, rms=0.090698Jy sigma=0.000618 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (122.5, 9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00472067 Jy ! Component: 100 - total flux cleaned = 0.0050249 Jy ! Component: 150 - total flux cleaned = 0.00527874 Jy ! Component: 200 - total flux cleaned = 0.00538921 Jy ! Total flux subtracted in 200 components = 0.00538921 Jy ! Clean residual min=-0.005907 max=0.005613 Jy/beam ! Clean residual mean=-0.000004 rms=0.001494 Jy/beam ! Combined flux in latest and established models = 1.22746 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 75 components and 1.22746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090002Jy sigma=0.000613 ! Fit after self-cal, rms=0.089976Jy sigma=0.000613 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089976Jy sigma=0.000613 ! Fit after self-cal, rms=0.089909Jy sigma=0.000613 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=7.168 mas, bpa=-4.769 degrees ! Estimated noise=3670.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180167 Jy ! Component: 100 - total flux cleaned = 0.00147002 Jy ! Component: 150 - total flux cleaned = 0.00125832 Jy ! Component: 200 - total flux cleaned = 0.00105735 Jy ! Total flux subtracted in 200 components = 0.00105735 Jy ! Clean residual min=-0.005780 max=0.005272 Jy/beam ! Clean residual mean=-0.000007 rms=0.001389 Jy/beam ! Combined flux in latest and established models = 1.22852 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 84 components and 1.22852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089615Jy sigma=0.000611 ! Fit after self-cal, rms=0.089621Jy sigma=0.000611 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.88946e-05 Jy ! Component: 100 - total flux cleaned = -0.0002758 Jy ! Component: 150 - total flux cleaned = -0.000365054 Jy ! Component: 200 - total flux cleaned = -0.000451769 Jy ! Total flux subtracted in 200 components = -0.000451769 Jy ! Clean residual min=-0.005691 max=0.005213 Jy/beam ! Clean residual mean=-0.000007 rms=0.001339 Jy/beam ! Combined flux in latest and established models = 1.22807 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 88 components and 1.22807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089415Jy sigma=0.000610 ! Fit after self-cal, rms=0.089425Jy sigma=0.000610 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089425Jy sigma=0.000610 ! Fit after self-cal, rms=0.089415Jy sigma=0.000610 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.007 mas, bmaj=12.87 mas, bpa=6.284 degrees ! Estimated noise=4659.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000628526 Jy ! Component: 100 - total flux cleaned = -0.000787956 Jy ! Component: 150 - total flux cleaned = -0.000977349 Jy ! Component: 200 - total flux cleaned = -0.00137791 Jy ! Total flux subtracted in 200 components = -0.00137791 Jy ! Clean residual min=-0.004730 max=0.005465 Jy/beam ! Clean residual mean=-0.000014 rms=0.001320 Jy/beam ! Combined flux in latest and established models = 1.22669 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 102 components and 1.22669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089347Jy sigma=0.000610 ! Fit after self-cal, rms=0.089360Jy sigma=0.000610 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000433397 Jy ! Component: 100 - total flux cleaned = -0.000793491 Jy ! Component: 150 - total flux cleaned = -0.00102886 Jy ! Component: 200 - total flux cleaned = -0.00124752 Jy ! Total flux subtracted in 200 components = -0.00124752 Jy ! Clean residual min=-0.004815 max=0.005385 Jy/beam ! Clean residual mean=-0.000012 rms=0.001271 Jy/beam ! Combined flux in latest and established models = 1.22544 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 111 components and 1.22544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089311Jy sigma=0.000609 ! Fit after self-cal, rms=0.089316Jy sigma=0.000609 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=7.167 mas, bpa=-4.756 degrees ! Estimated noise=3669.62 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.086 x 7.167 at -4.756 degrees (North through East) ! Clean map min=-0.0062126 max=1.0796 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089316Jy sigma=0.000609 ! Fit after self-cal, rms=0.083298Jy sigma=0.000559 ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=7.169 mas, bpa=-4.772 degrees ! Estimated noise=3668.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000906413 Jy ! Component: 100 - total flux cleaned = -0.000915813 Jy ! Component: 150 - total flux cleaned = -0.00131371 Jy ! Component: 200 - total flux cleaned = -0.00145954 Jy ! Total flux subtracted in 200 components = -0.00145954 Jy ! Clean residual min=-0.005482 max=0.004989 Jy/beam ! Clean residual mean=-0.000005 rms=0.001247 Jy/beam ! Combined flux in latest and established models = 1.22398 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 120 components and 1.22398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083091Jy sigma=0.000558 ! Fit after self-cal, rms=0.083090Jy sigma=0.000558 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000289877 Jy ! Component: 100 - total flux cleaned = -0.000356175 Jy ! Component: 150 - total flux cleaned = -0.00041969 Jy ! Component: 200 - total flux cleaned = -0.000360456 Jy ! Total flux subtracted in 200 components = -0.000360456 Jy ! Clean residual min=-0.005433 max=0.004990 Jy/beam ! Clean residual mean=-0.000005 rms=0.001222 Jy/beam ! Combined flux in latest and established models = 1.22362 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 124 components and 1.22362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082968Jy sigma=0.000558 ! Fit after self-cal, rms=0.082971Jy sigma=0.000558 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082971Jy sigma=0.000558 ! Fit after self-cal, rms=0.082957Jy sigma=0.000558 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.736 mas, bmaj=6.842 mas, bpa=-7.467 degrees ! Estimated noise=4279.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.831933 Jy ! Component: 100 - total flux cleaned = 1.04675 Jy ! Component: 150 - total flux cleaned = 1.13365 Jy ! Component: 200 - total flux cleaned = 1.16965 Jy ! Total flux subtracted in 200 components = 1.16965 Jy ! Clean residual min=-0.012198 max=0.015440 Jy/beam ! Clean residual mean=-0.000012 rms=0.003898 Jy/beam ! Combined flux in latest and established models = 1.16965 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.16965 Jy ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=7.168 mas, bpa=-4.763 degrees ! Estimated noise=3667.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208071 Jy ! Component: 100 - total flux cleaned = 0.0334697 Jy ! Component: 150 - total flux cleaned = 0.0413716 Jy ! Component: 200 - total flux cleaned = 0.0457757 Jy ! Total flux subtracted in 200 components = 0.0457757 Jy ! Clean residual min=-0.007705 max=0.006228 Jy/beam ! Clean residual mean=-0.000013 rms=0.001922 Jy/beam ! Combined flux in latest and established models = 1.21543 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 30 components and 1.21543 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.006 mas, bmaj=12.87 mas, bpa=6.271 degrees ! Estimated noise=4657.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00434016 Jy ! Component: 100 - total flux cleaned = 0.00387477 Jy ! Component: 150 - total flux cleaned = 0.00387445 Jy ! Component: 200 - total flux cleaned = 0.00364602 Jy ! Total flux subtracted in 200 components = 0.00364602 Jy ! Clean residual min=-0.005692 max=0.004871 Jy/beam ! Clean residual mean=-0.000020 rms=0.001489 Jy/beam ! Combined flux in latest and established models = 1.21907 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101099 Jy ! Component: 100 - total flux cleaned = 0.000191823 Jy ! Component: 150 - total flux cleaned = 0.000279639 Jy ! Component: 200 - total flux cleaned = 0.000440734 Jy ! Total flux subtracted in 200 components = 0.000440734 Jy ! Clean residual min=-0.004962 max=0.004981 Jy/beam ! Clean residual mean=-0.000019 rms=0.001357 Jy/beam ! Combined flux in latest and established models = 1.21952 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 68 components and 1.21952 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=7.168 mas, bpa=-4.763 degrees ! Estimated noise=3667.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000718994 Jy ! Component: 100 - total flux cleaned = 0.00105412 Jy ! Component: 150 - total flux cleaned = 0.00133772 Jy ! Component: 200 - total flux cleaned = 0.00133948 Jy ! Total flux subtracted in 200 components = 0.00133948 Jy ! Clean residual min=-0.006179 max=0.005341 Jy/beam ! Clean residual mean=-0.000005 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 1.22085 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 91 components and 1.22085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083786Jy sigma=0.000563 ! Fit after self-cal, rms=0.083705Jy sigma=0.000562 wmodel J0745-0044_S_2017_01_21_pus_map.mod ! Writing 91 model components to file: J0745-0044_S_2017_01_21_pus_map.mod wobs J0745-0044_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0745-0044_S_2017_01_21_pus_uvs.fits wwins J0745-0044_S_2017_01_21_pus_map.win ! wwins: Wrote 3 windows to J0745-0044_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00274002 Jy ! Component: 100 - total flux cleaned = -0.00408863 Jy ! Component: 150 - total flux cleaned = -0.00479649 Jy ! Component: 200 - total flux cleaned = -0.00504877 Jy ! Component: 250 - total flux cleaned = -0.004971 Jy ! Component: 300 - total flux cleaned = -0.00474138 Jy ! Component: 350 - total flux cleaned = -0.00444782 Jy ! Component: 400 - total flux cleaned = -0.00444853 Jy ! Component: 450 - total flux cleaned = -0.00424251 Jy ! Component: 500 - total flux cleaned = -0.00410857 Jy ! Component: 550 - total flux cleaned = -0.00384962 Jy ! Component: 600 - total flux cleaned = -0.00372447 Jy ! Component: 650 - total flux cleaned = -0.00372464 Jy ! Component: 700 - total flux cleaned = -0.00372513 Jy ! Component: 750 - total flux cleaned = -0.00372531 Jy ! Component: 800 - total flux cleaned = -0.00389781 Jy ! Component: 850 - total flux cleaned = -0.0038984 Jy ! Component: 900 - total flux cleaned = -0.00412112 Jy ! Component: 950 - total flux cleaned = -0.00422888 Jy ! Component: 1000 - total flux cleaned = -0.00412305 Jy ! Component: 1050 - total flux cleaned = -0.00417631 Jy ! Component: 1100 - total flux cleaned = -0.00417687 Jy ! Component: 1150 - total flux cleaned = -0.00422846 Jy ! Component: 1200 - total flux cleaned = -0.00422868 Jy ! Component: 1250 - total flux cleaned = -0.00427933 Jy ! Component: 1300 - total flux cleaned = -0.0042786 Jy ! Component: 1350 - total flux cleaned = -0.00432695 Jy ! Component: 1400 - total flux cleaned = -0.00432711 Jy ! Component: 1450 - total flux cleaned = -0.00432727 Jy ! Component: 1500 - total flux cleaned = -0.00423405 Jy ! Component: 1550 - total flux cleaned = -0.0041887 Jy ! Component: 1600 - total flux cleaned = -0.00427994 Jy ! Component: 1650 - total flux cleaned = -0.00432556 Jy ! Component: 1700 - total flux cleaned = -0.00445866 Jy ! Component: 1750 - total flux cleaned = -0.00441417 Jy ! Component: 1800 - total flux cleaned = -0.00450117 Jy ! Component: 1850 - total flux cleaned = -0.00445765 Jy ! Component: 1900 - total flux cleaned = -0.00454341 Jy ! Component: 1950 - total flux cleaned = -0.00458586 Jy ! Component: 2000 - total flux cleaned = -0.0046701 Jy ! Component: 2050 - total flux cleaned = -0.00475384 Jy ! Component: 2100 - total flux cleaned = -0.00487764 Jy ! Component: 2150 - total flux cleaned = -0.00487768 Jy ! Component: 2200 - total flux cleaned = -0.00495899 Jy ! Component: 2250 - total flux cleaned = -0.0050798 Jy ! Component: 2300 - total flux cleaned = -0.00515992 Jy ! Component: 2350 - total flux cleaned = -0.00527875 Jy ! Component: 2400 - total flux cleaned = -0.00531803 Jy ! Component: 2450 - total flux cleaned = -0.0053568 Jy ! Component: 2500 - total flux cleaned = -0.00531791 Jy ! Component: 2550 - total flux cleaned = -0.00543406 Jy ! Component: 2600 - total flux cleaned = -0.00547247 Jy ! Component: 2650 - total flux cleaned = -0.00539605 Jy ! Component: 2700 - total flux cleaned = -0.00547219 Jy ! Component: 2750 - total flux cleaned = -0.0053963 Jy ! Component: 2800 - total flux cleaned = -0.00539634 Jy ! Component: 2850 - total flux cleaned = -0.00554676 Jy ! Component: 2900 - total flux cleaned = -0.00565905 Jy ! Component: 2950 - total flux cleaned = -0.00577109 Jy ! Component: 3000 - total flux cleaned = -0.00584571 Jy ! Component: 3050 - total flux cleaned = -0.00595718 Jy ! Component: 3100 - total flux cleaned = -0.00606818 Jy ! Component: 3150 - total flux cleaned = -0.00614227 Jy ! Component: 3200 - total flux cleaned = -0.00636364 Jy ! Component: 3250 - total flux cleaned = -0.0064372 Jy ! Component: 3300 - total flux cleaned = -0.0065473 Jy ! Component: 3350 - total flux cleaned = -0.0066575 Jy ! Component: 3400 - total flux cleaned = -0.00676733 Jy ! Component: 3450 - total flux cleaned = -0.00691348 Jy ! Component: 3500 - total flux cleaned = -0.00698648 Jy ! Component: 3550 - total flux cleaned = -0.00709554 Jy ! Component: 3600 - total flux cleaned = -0.00716838 Jy ! Component: 3650 - total flux cleaned = -0.00727745 Jy ! Component: 3700 - total flux cleaned = -0.00731377 Jy ! Component: 3750 - total flux cleaned = -0.00735003 Jy ! Component: 3800 - total flux cleaned = -0.00742249 Jy ! Component: 3850 - total flux cleaned = -0.00742242 Jy ! Component: 3900 - total flux cleaned = -0.00745852 Jy ! Component: 3950 - total flux cleaned = -0.00745839 Jy ! Component: 4000 - total flux cleaned = -0.0075306 Jy ! Component: 4050 - total flux cleaned = -0.00760303 Jy ! Total flux subtracted in 4096 components = -0.007603 Jy ! Clean residual min=-0.001907 max=0.002472 Jy/beam ! Clean residual mean=-0.000001 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 1.21325 Jy keep ! Adding 218 model components to the UV plane model. ! The established model now contains 309 components and 1.21325 Jy ![Exited script file: muppet] wmap "J0745-0044_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.087 x 7.168 at -4.763 degrees (North through East) ! Clean map min=-0.0073213 max=1.0812 Jy/beam ! Writing clean map to FITS file: J0745-0044_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.08119 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000531429 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.147457 0.147457 0.294913 0.589826 1.17965 2.3593 4.71861 9.43722 18.8744 37.7489 75.4977 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.081 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.087 x 7.168 at -4.763 degrees (North through East) ! Clean map min=-0.0073213 max=1.0812 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0745-0044_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:49:49 2019