! Started logfile: J0743-4434_S_2017_09_26_pus_uvs.log on Sat May 11 12:57:35 2019 obs J0743-4434_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0743-4434_S_2017_09_26_pus_uva.fits ! AN table 1: 291 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.184422 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0743-4434 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 7728 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0743-4434_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1690 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1709 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1691 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2364 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.921711Jy sigma=0.005313 ! Fit after self-cal, rms=0.871886Jy sigma=0.005038 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.513 mas, bmaj=19.79 mas, bpa=-23.16 degrees ! Estimated noise=4660.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0872799 Jy ! Component: 100 - total flux cleaned = 0.117768 Jy ! Total flux subtracted in 100 components = 0.117768 Jy ! Clean residual min=-0.014717 max=0.021290 Jy/beam ! Clean residual mean=-0.000486 rms=0.005290 Jy/beam ! Combined flux in latest and established models = 0.117768 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.117768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117905Jy sigma=0.000670 ! Fit after self-cal, rms=0.117510Jy sigma=0.000668 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.658 mas, bmaj=26.95 mas, bpa=-26.24 degrees ! Estimated noise=1716.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0329341 Jy ! Component: 100 - total flux cleaned = 0.0472197 Jy ! Component: 150 - total flux cleaned = 0.0566754 Jy ! Component: 200 - total flux cleaned = 0.0630913 Jy ! Total flux subtracted in 200 components = 0.0630913 Jy ! Clean residual min=-0.006027 max=0.006177 Jy/beam ! Clean residual mean=-0.000517 rms=0.002318 Jy/beam ! Combined flux in latest and established models = 0.180859 Jy ! Performing phase self-cal ! Adding 91 model components to the UV plane model. ! The established model now contains 113 components and 0.180859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108546Jy sigma=0.000616 ! Fit after self-cal, rms=0.108295Jy sigma=0.000615 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 63 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.02 ! LA 0.97 MK 1.09 NL 1.00* OV 1.12 ! PT 0.97 ! ! ! Correcting IF 2. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.98 ! LA 0.96 MK 1.15 NL 1.00* OV 1.08 ! PT 0.96 ! ! ! Correcting IF 3. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.02 ! LA 0.93 MK 1.13 NL 1.00* OV 1.04 ! PT 0.93 ! ! ! Correcting IF 4. ! A total of 255 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.108295Jy sigma=0.000615 ! Fit after self-cal, rms=0.110820Jy sigma=0.000610 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.881 mas, bmaj=28.78 mas, bpa=-26.35 degrees ! Estimated noise=1845.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174646 Jy ! Component: 100 - total flux cleaned = 0.00232839 Jy ! Component: 150 - total flux cleaned = 0.00261754 Jy ! Component: 200 - total flux cleaned = 0.00291179 Jy ! Total flux subtracted in 200 components = 0.00291179 Jy ! Clean residual min=-0.004664 max=0.004654 Jy/beam ! Clean residual mean=-0.000074 rms=0.001201 Jy/beam ! Combined flux in latest and established models = 0.183771 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 125 components and 0.183771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110736Jy sigma=0.000610 ! Fit after self-cal, rms=0.110846Jy sigma=0.000610 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110846Jy sigma=0.000610 ! Fit after self-cal, rms=0.111834Jy sigma=0.000609 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.903 mas, bmaj=28.91 mas, bpa=-26.4 degrees ! Estimated noise=1861.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169698 Jy ! Component: 100 - total flux cleaned = 0.00226695 Jy ! Component: 150 - total flux cleaned = 0.00251684 Jy ! Component: 200 - total flux cleaned = 0.00276265 Jy ! Total flux subtracted in 200 components = 0.00276265 Jy ! Clean residual min=-0.004206 max=0.003857 Jy/beam ! Clean residual mean=-0.000057 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.186534 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 130 components and 0.186534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111801Jy sigma=0.000609 ! Fit after self-cal, rms=0.111804Jy sigma=0.000609 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000315878 Jy ! Component: 100 - total flux cleaned = 0.000477844 Jy ! Component: 150 - total flux cleaned = 0.000641357 Jy ! Component: 200 - total flux cleaned = 0.000781901 Jy ! Total flux subtracted in 200 components = 0.000781901 Jy ! Clean residual min=-0.004159 max=0.003581 Jy/beam ! Clean residual mean=-0.000049 rms=0.001020 Jy/beam ! Combined flux in latest and established models = 0.187316 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 138 components and 0.187316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111794Jy sigma=0.000609 ! Fit after self-cal, rms=0.111794Jy sigma=0.000609 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111794Jy sigma=0.000609 ! Fit after self-cal, rms=0.112151Jy sigma=0.000608 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.905 mas, bmaj=28.91 mas, bpa=-26.44 degrees ! Estimated noise=1863.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000899442 Jy ! Component: 100 - total flux cleaned = 0.00106359 Jy ! Component: 150 - total flux cleaned = 0.00118361 Jy ! Component: 200 - total flux cleaned = 0.00129146 Jy ! Total flux subtracted in 200 components = 0.00129146 Jy ! Clean residual min=-0.003788 max=0.003121 Jy/beam ! Clean residual mean=-0.000047 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.188607 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 142 components and 0.188607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112137Jy sigma=0.000608 ! Fit after self-cal, rms=0.112174Jy sigma=0.000608 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271798 Jy ! Component: 100 - total flux cleaned = 0.000348466 Jy ! Component: 150 - total flux cleaned = 0.000417195 Jy ! Component: 200 - total flux cleaned = 0.000494334 Jy ! Total flux subtracted in 200 components = 0.000494334 Jy ! Clean residual min=-0.003779 max=0.002952 Jy/beam ! Clean residual mean=-0.000041 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.189102 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 146 components and 0.189102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112167Jy sigma=0.000608 ! Fit after self-cal, rms=0.112156Jy sigma=0.000608 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112156Jy sigma=0.000608 ! Fit after self-cal, rms=0.112167Jy sigma=0.000608 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.23 mas, bmaj=54.25 mas, bpa=-14.83 degrees ! Estimated noise=2126.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000914871 Jy ! Component: 100 - total flux cleaned = 0.00105249 Jy ! Component: 150 - total flux cleaned = 0.00118704 Jy ! Component: 200 - total flux cleaned = 0.0012867 Jy ! Total flux subtracted in 200 components = 0.0012867 Jy ! Clean residual min=-0.002504 max=0.002492 Jy/beam ! Clean residual mean=-0.000057 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.190388 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 155 components and 0.190388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112160Jy sigma=0.000608 ! Fit after self-cal, rms=0.112161Jy sigma=0.000608 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000233579 Jy ! Component: 100 - total flux cleaned = 0.000232811 Jy ! Component: 150 - total flux cleaned = 0.000272345 Jy ! Component: 200 - total flux cleaned = 0.000327772 Jy ! Total flux subtracted in 200 components = 0.000327772 Jy ! Clean residual min=-0.002480 max=0.002484 Jy/beam ! Clean residual mean=-0.000052 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.190716 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 168 components and 0.190716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112158Jy sigma=0.000608 ! Fit after self-cal, rms=0.112157Jy sigma=0.000608 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=28.9 mas, bpa=-26.46 degrees ! Estimated noise=1862.7 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.906 x 28.9 at -26.46 degrees (North through East) ! Clean map min=-0.0033961 max=0.10076 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.646 mas, bmaj=20.37 mas, bpa=-23.58 degrees ! Estimated noise=6569.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0925782 Jy ! Component: 100 - total flux cleaned = 0.123561 Jy ! Component: 150 - total flux cleaned = 0.141247 Jy ! Component: 200 - total flux cleaned = 0.152602 Jy ! Total flux subtracted in 200 components = 0.152602 Jy ! Clean residual min=-0.019361 max=0.016474 Jy/beam ! Clean residual mean=-0.000256 rms=0.005481 Jy/beam ! Combined flux in latest and established models = 0.152602 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.152602 Jy ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=28.9 mas, bpa=-26.46 degrees ! Estimated noise=1862.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156247 Jy ! Component: 100 - total flux cleaned = 0.0240739 Jy ! Component: 150 - total flux cleaned = 0.0292812 Jy ! Component: 200 - total flux cleaned = 0.0324739 Jy ! Total flux subtracted in 200 components = 0.0324739 Jy ! Clean residual min=-0.004288 max=0.003914 Jy/beam ! Clean residual mean=-0.000109 rms=0.001324 Jy/beam ! Combined flux in latest and established models = 0.185076 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 74 components and 0.185076 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.23 mas, bmaj=54.25 mas, bpa=-14.83 degrees ! Estimated noise=2126.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229915 Jy ! Component: 100 - total flux cleaned = 0.00290156 Jy ! Component: 150 - total flux cleaned = 0.00340203 Jy ! Component: 200 - total flux cleaned = 0.0038159 Jy ! Total flux subtracted in 200 components = 0.0038159 Jy ! Clean residual min=-0.002784 max=0.002805 Jy/beam ! Clean residual mean=-0.000094 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.188892 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000347788 Jy ! Component: 100 - total flux cleaned = 0.000603504 Jy ! Component: 150 - total flux cleaned = 0.000861765 Jy ! Component: 200 - total flux cleaned = 0.00105249 Jy ! Total flux subtracted in 200 components = 0.00105249 Jy ! Clean residual min=-0.002599 max=0.002567 Jy/beam ! Clean residual mean=-0.000074 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.189944 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 87 components and 0.189944 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=28.9 mas, bpa=-26.46 degrees ! Estimated noise=1862.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275217 Jy ! Component: 100 - total flux cleaned = 0.000520283 Jy ! Component: 150 - total flux cleaned = 0.000721795 Jy ! Component: 200 - total flux cleaned = 0.000806548 Jy ! Total flux subtracted in 200 components = 0.000806548 Jy ! Clean residual min=-0.003471 max=0.003116 Jy/beam ! Clean residual mean=-0.000040 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 0.190751 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 93 components and 0.190751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112185Jy sigma=0.000608 ! Fit after self-cal, rms=0.112160Jy sigma=0.000608 wmodel J0743-4434_S_2017_09_26_pus_map.mod ! Writing 93 model components to file: J0743-4434_S_2017_09_26_pus_map.mod wobs J0743-4434_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0743-4434_S_2017_09_26_pus_uvs.fits wwins J0743-4434_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J0743-4434_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00126878 Jy ! Component: 100 - total flux cleaned = -0.00159874 Jy ! Component: 150 - total flux cleaned = -0.00163944 Jy ! Component: 200 - total flux cleaned = -0.00175555 Jy ! Component: 250 - total flux cleaned = -0.00168045 Jy ! Component: 300 - total flux cleaned = -0.00168057 Jy ! Component: 350 - total flux cleaned = -0.00168018 Jy ! Component: 400 - total flux cleaned = -0.00167992 Jy ! Component: 450 - total flux cleaned = -0.00164568 Jy ! Component: 500 - total flux cleaned = -0.0016122 Jy ! Component: 550 - total flux cleaned = -0.00154563 Jy ! Component: 600 - total flux cleaned = -0.00164509 Jy ! Component: 650 - total flux cleaned = -0.00180968 Jy ! Component: 700 - total flux cleaned = -0.0020399 Jy ! Component: 750 - total flux cleaned = -0.00223876 Jy ! Component: 800 - total flux cleaned = -0.00247193 Jy ! Component: 850 - total flux cleaned = -0.00267319 Jy ! Component: 900 - total flux cleaned = -0.00284169 Jy ! Component: 950 - total flux cleaned = -0.0030455 Jy ! Component: 1000 - total flux cleaned = -0.00325142 Jy ! Component: 1050 - total flux cleaned = -0.00349379 Jy ! Component: 1100 - total flux cleaned = -0.00363481 Jy ! Component: 1150 - total flux cleaned = -0.00381415 Jy ! Component: 1200 - total flux cleaned = -0.00385081 Jy ! Component: 1250 - total flux cleaned = -0.00385055 Jy ! Component: 1300 - total flux cleaned = -0.00384983 Jy ! Component: 1350 - total flux cleaned = -0.00388874 Jy ! Component: 1400 - total flux cleaned = -0.00388795 Jy ! Component: 1450 - total flux cleaned = -0.00397114 Jy ! Component: 1500 - total flux cleaned = -0.00392893 Jy ! Component: 1550 - total flux cleaned = -0.00392911 Jy ! Component: 1600 - total flux cleaned = -0.00392881 Jy ! Component: 1650 - total flux cleaned = -0.00388253 Jy ! Component: 1700 - total flux cleaned = -0.00383399 Jy ! Component: 1750 - total flux cleaned = -0.00383315 Jy ! Component: 1800 - total flux cleaned = -0.00378143 Jy ! Component: 1850 - total flux cleaned = -0.00378203 Jy ! Component: 1900 - total flux cleaned = -0.00372585 Jy ! Component: 1950 - total flux cleaned = -0.00372498 Jy ! Component: 2000 - total flux cleaned = -0.00372422 Jy ! Component: 2050 - total flux cleaned = -0.00359966 Jy ! Component: 2100 - total flux cleaned = -0.00353402 Jy ! Component: 2150 - total flux cleaned = -0.00346699 Jy ! Component: 2200 - total flux cleaned = -0.00339774 Jy ! Component: 2250 - total flux cleaned = -0.00332687 Jy ! Component: 2300 - total flux cleaned = -0.00317745 Jy ! Component: 2350 - total flux cleaned = -0.00309728 Jy ! Component: 2400 - total flux cleaned = -0.00301491 Jy ! Component: 2450 - total flux cleaned = -0.00293036 Jy ! Component: 2500 - total flux cleaned = -0.00292814 Jy ! Component: 2550 - total flux cleaned = -0.00283533 Jy ! Component: 2600 - total flux cleaned = -0.00274046 Jy ! Component: 2650 - total flux cleaned = -0.00264104 Jy ! Component: 2700 - total flux cleaned = -0.00253792 Jy ! Component: 2750 - total flux cleaned = -0.00243216 Jy ! Component: 2800 - total flux cleaned = -0.00243553 Jy ! Component: 2850 - total flux cleaned = -0.002203 Jy ! Component: 2900 - total flux cleaned = -0.00220148 Jy ! Component: 2950 - total flux cleaned = -0.00207631 Jy ! Component: 3000 - total flux cleaned = -0.00207803 Jy ! Component: 3050 - total flux cleaned = -0.00194546 Jy ! Component: 3100 - total flux cleaned = -0.00166333 Jy ! Component: 3150 - total flux cleaned = -0.00166153 Jy ! Component: 3200 - total flux cleaned = -0.00150634 Jy ! Component: 3250 - total flux cleaned = -0.00134453 Jy ! Component: 3300 - total flux cleaned = -0.001348 Jy ! Component: 3350 - total flux cleaned = -0.00117919 Jy ! Component: 3400 - total flux cleaned = -0.000814888 Jy ! Component: 3450 - total flux cleaned = -0.000815904 Jy ! Component: 3500 - total flux cleaned = -0.000417497 Jy ! Component: 3550 - total flux cleaned = -0.000206378 Jy ! Component: 3600 - total flux cleaned = 1.46553e-05 Jy ! Component: 3650 - total flux cleaned = 1.60789e-05 Jy ! Component: 3700 - total flux cleaned = 0.000246855 Jy ! Component: 3750 - total flux cleaned = 0.000488616 Jy ! Component: 3800 - total flux cleaned = 0.000744674 Jy ! Component: 3850 - total flux cleaned = 0.00101625 Jy ! Component: 3900 - total flux cleaned = 0.00101845 Jy ! Component: 3950 - total flux cleaned = 0.00130571 Jy ! Component: 4000 - total flux cleaned = 0.00160205 Jy ! Component: 4050 - total flux cleaned = 0.00191536 Jy ! Total flux subtracted in 4096 components = 0.00223481 Jy ! Clean residual min=-0.017772 max=0.018435 Jy/beam ! Clean residual mean=0.000003 rms=0.005050 Jy/beam ! Combined flux in latest and established models = 0.192986 Jy keep ! Adding 116 model components to the UV plane model. ! The established model now contains 209 components and 0.192986 Jy ![Exited script file: muppet] wmap "J0743-4434_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.906 x 28.9 at -26.46 degrees (North through East) ! Clean map min=-0.025082 max=0.10357 Jy/beam ! Writing clean map to FITS file: J0743-4434_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.103572 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00480055 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -13.905 13.905 27.81 55.62 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0144 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.103 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.906 x 28.9 at -26.46 degrees (North through East) ! Clean map min=-0.025082 max=0.10357 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0743-4434_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:57:40 2019