! Started logfile: J0743-0440_S_2017_01_21_pus_uvs.log on Sun May 5 15:49:33 2019 obs J0743-0440_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0743-0440_S_2017_01_21_pus_uva.fits ! AN table 1: 84 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.700728 visibilities/baseline/integration-bin. ! Found source: J0743-0440 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 8476 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0743-0440_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 355 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.891691Jy sigma=0.006251 ! Fit after self-cal, rms=0.866246Jy sigma=0.006106 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.737 mas, bmaj=6.629 mas, bpa=-0.02487 degrees ! Estimated noise=1566.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103362 Jy ! Component: 100 - total flux cleaned = 0.126755 Jy ! Total flux subtracted in 100 components = 0.126755 Jy ! Clean residual min=-0.009590 max=0.009004 Jy/beam ! Clean residual mean=0.000003 rms=0.002090 Jy/beam ! Combined flux in latest and established models = 0.126755 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.126755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134566Jy sigma=0.000708 ! Fit after self-cal, rms=0.134592Jy sigma=0.000708 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.122 mas, bmaj=7.175 mas, bpa=1.176 degrees ! Estimated noise=1243.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135174 Jy ! Component: 100 - total flux cleaned = 0.0196621 Jy ! Component: 150 - total flux cleaned = 0.0226653 Jy ! Component: 200 - total flux cleaned = 0.023111 Jy ! Total flux subtracted in 200 components = 0.023111 Jy ! Clean residual min=-0.005921 max=0.007531 Jy/beam ! Clean residual mean=-0.000004 rms=0.001556 Jy/beam ! Combined flux in latest and established models = 0.149866 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 0.149866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132656Jy sigma=0.000701 ! Fit after self-cal, rms=0.132624Jy sigma=0.000701 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.81 HN 0.97 LA 1.02 ! MK 0.97 NL 0.98 OV 1.02 PT 1.05 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.79 HN 0.99 LA 1.02 ! MK 1.00 NL 1.00 OV 1.09 PT 1.09 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.90 HN 1.03 LA 0.99 ! MK 1.02 NL 0.98 OV 0.86 PT 1.50 ! SC 1.04 ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.85 HN 0.99 LA 0.95 ! MK 1.13 NL 1.00* OV 0.97 PT 1.09 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.132624Jy sigma=0.000701 ! Fit after self-cal, rms=0.126177Jy sigma=0.000691 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.127 mas, bmaj=7.165 mas, bpa=1.175 degrees ! Estimated noise=1257.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171473 Jy ! Component: 100 - total flux cleaned = 0.00202775 Jy ! Component: 150 - total flux cleaned = 0.0021105 Jy ! Component: 200 - total flux cleaned = 0.0021103 Jy ! Total flux subtracted in 200 components = 0.0021103 Jy ! Clean residual min=-0.005623 max=0.005591 Jy/beam ! Clean residual mean=-0.000008 rms=0.001406 Jy/beam ! Combined flux in latest and established models = 0.151977 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.151977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126085Jy sigma=0.000691 ! Fit after self-cal, rms=0.125720Jy sigma=0.000690 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125720Jy sigma=0.000690 ! Fit after self-cal, rms=0.118429Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=7.173 mas, bpa=1.214 degrees ! Estimated noise=1262.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000491205 Jy ! Component: 100 - total flux cleaned = 0.000524277 Jy ! Component: 150 - total flux cleaned = 0.000524136 Jy ! Component: 200 - total flux cleaned = 0.00052317 Jy ! Total flux subtracted in 200 components = 0.00052317 Jy ! Clean residual min=-0.003158 max=0.003617 Jy/beam ! Clean residual mean=-0.000004 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.1525 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.1525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118411Jy sigma=0.000675 ! Fit after self-cal, rms=0.118335Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000116925 Jy ! Component: 100 - total flux cleaned = -9.24444e-05 Jy ! Component: 150 - total flux cleaned = -9.20794e-05 Jy ! Component: 200 - total flux cleaned = -0.000129139 Jy ! Total flux subtracted in 200 components = -0.000129139 Jy ! Clean residual min=-0.003288 max=0.003431 Jy/beam ! Clean residual mean=-0.000003 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.152371 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.152371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118325Jy sigma=0.000674 ! Fit after self-cal, rms=0.118324Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118324Jy sigma=0.000674 ! Fit after self-cal, rms=0.118296Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.136 mas, bmaj=7.183 mas, bpa=1.265 degrees ! Estimated noise=1263.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000373785 Jy ! Component: 100 - total flux cleaned = -0.000422722 Jy ! Component: 150 - total flux cleaned = -0.000451521 Jy ! Component: 200 - total flux cleaned = -0.000464602 Jy ! Total flux subtracted in 200 components = -0.000464602 Jy ! Clean residual min=-0.003332 max=0.003539 Jy/beam ! Clean residual mean=-0.000004 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.151906 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.151906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118291Jy sigma=0.000672 ! Fit after self-cal, rms=0.118442Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12, 54). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206508 Jy ! Component: 100 - total flux cleaned = 0.00207588 Jy ! Component: 150 - total flux cleaned = 0.00198367 Jy ! Component: 200 - total flux cleaned = 0.00198484 Jy ! Total flux subtracted in 200 components = 0.00198484 Jy ! Clean residual min=-0.002813 max=0.003229 Jy/beam ! Clean residual mean=-0.000004 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.153891 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 57 components and 0.153891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118349Jy sigma=0.000672 ! Fit after self-cal, rms=0.118354Jy sigma=0.000672 ! Inverting map ! Added new window around map position (72.5, 108). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132215 Jy ! Component: 100 - total flux cleaned = 0.00125862 Jy ! Component: 150 - total flux cleaned = 0.00131755 Jy ! Component: 200 - total flux cleaned = 0.00107164 Jy ! Total flux subtracted in 200 components = 0.00107164 Jy ! Clean residual min=-0.002845 max=0.002811 Jy/beam ! Clean residual mean=-0.000004 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.154963 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 77 components and 0.154963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118249Jy sigma=0.000671 ! Fit after self-cal, rms=0.118235Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118235Jy sigma=0.000671 ! Fit after self-cal, rms=0.119090Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.619 mas, bmaj=12.2 mas, bpa=3.215 degrees ! Estimated noise=1644.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000432295 Jy ! Component: 100 - total flux cleaned = 0.000337753 Jy ! Component: 150 - total flux cleaned = 0.000410594 Jy ! Component: 200 - total flux cleaned = 0.000375056 Jy ! Total flux subtracted in 200 components = 0.000375056 Jy ! Clean residual min=-0.003022 max=0.003165 Jy/beam ! Clean residual mean=-0.000006 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.155338 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 93 components and 0.155338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119068Jy sigma=0.000671 ! Fit after self-cal, rms=0.119160Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.54173e-06 Jy ! Component: 100 - total flux cleaned = -0.000132461 Jy ! Component: 150 - total flux cleaned = -0.000218984 Jy ! Component: 200 - total flux cleaned = -0.000274164 Jy ! Total flux subtracted in 200 components = -0.000274164 Jy ! Clean residual min=-0.003009 max=0.002975 Jy/beam ! Clean residual mean=-0.000006 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.155063 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 104 components and 0.155063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119151Jy sigma=0.000671 ! Fit after self-cal, rms=0.119153Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=7.196 mas, bpa=1.26 degrees ! Estimated noise=1262.5 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.142 x 7.196 at 1.26 degrees (North through East) ! Clean map min=-0.0027215 max=0.14061 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.741 mas, bmaj=6.619 mas, bpa=0.1018 degrees ! Estimated noise=1639.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107166 Jy ! Component: 100 - total flux cleaned = 0.131722 Jy ! Component: 150 - total flux cleaned = 0.141869 Jy ! Component: 200 - total flux cleaned = 0.146358 Jy ! Total flux subtracted in 200 components = 0.146358 Jy ! Clean residual min=-0.005078 max=0.005056 Jy/beam ! Clean residual mean=-0.000001 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 0.146358 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.146358 Jy ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=7.196 mas, bpa=1.26 degrees ! Estimated noise=1262.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00522452 Jy ! Component: 100 - total flux cleaned = 0.00839903 Jy ! Component: 150 - total flux cleaned = 0.00950839 Jy ! Component: 200 - total flux cleaned = 0.00959507 Jy ! Total flux subtracted in 200 components = 0.00959507 Jy ! Clean residual min=-0.003357 max=0.002803 Jy/beam ! Clean residual mean=-0.000004 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.155954 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 33 components and 0.155954 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.619 mas, bmaj=12.2 mas, bpa=3.215 degrees ! Estimated noise=1644.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000428655 Jy ! Component: 100 - total flux cleaned = 0.000507506 Jy ! Component: 150 - total flux cleaned = 0.000441299 Jy ! Component: 200 - total flux cleaned = 0.000331614 Jy ! Total flux subtracted in 200 components = 0.000331614 Jy ! Clean residual min=-0.003288 max=0.003372 Jy/beam ! Clean residual mean=-0.000006 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.156285 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000147988 Jy ! Component: 100 - total flux cleaned = -0.000281374 Jy ! Component: 150 - total flux cleaned = -0.000404601 Jy ! Component: 200 - total flux cleaned = -0.000481162 Jy ! Total flux subtracted in 200 components = -0.000481162 Jy ! Clean residual min=-0.003176 max=0.003218 Jy/beam ! Clean residual mean=-0.000005 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.155804 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 53 components and 0.155804 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=7.196 mas, bpa=1.26 degrees ! Estimated noise=1262.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000197164 Jy ! Component: 100 - total flux cleaned = -0.000199732 Jy ! Component: 150 - total flux cleaned = -8.39512e-05 Jy ! Component: 200 - total flux cleaned = 7.64725e-05 Jy ! Total flux subtracted in 200 components = 7.64725e-05 Jy ! Clean residual min=-0.002791 max=0.002667 Jy/beam ! Clean residual mean=-0.000003 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.15588 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 71 components and 0.15588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119182Jy sigma=0.000671 ! Fit after self-cal, rms=0.119176Jy sigma=0.000671 wmodel J0743-0440_S_2017_01_21_pus_map.mod ! Writing 71 model components to file: J0743-0440_S_2017_01_21_pus_map.mod wobs J0743-0440_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0743-0440_S_2017_01_21_pus_uvs.fits wwins J0743-0440_S_2017_01_21_pus_map.win ! wwins: Wrote 3 windows to J0743-0440_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000263646 Jy ! Component: 100 - total flux cleaned = -0.000263808 Jy ! Component: 150 - total flux cleaned = -0.000354182 Jy ! Component: 200 - total flux cleaned = -0.000571037 Jy ! Component: 250 - total flux cleaned = -0.000780326 Jy ! Component: 300 - total flux cleaned = -0.00102408 Jy ! Component: 350 - total flux cleaned = -0.00126216 Jy ! Component: 400 - total flux cleaned = -0.00141588 Jy ! Component: 450 - total flux cleaned = -0.00137886 Jy ! Component: 500 - total flux cleaned = -0.00130684 Jy ! Component: 550 - total flux cleaned = -0.00137806 Jy ! Component: 600 - total flux cleaned = -0.00134257 Jy ! Component: 650 - total flux cleaned = -0.00134308 Jy ! Component: 700 - total flux cleaned = -0.00124251 Jy ! Component: 750 - total flux cleaned = -0.00114332 Jy ! Component: 800 - total flux cleaned = -0.00107826 Jy ! Component: 850 - total flux cleaned = -0.000790533 Jy ! Component: 900 - total flux cleaned = -0.000758585 Jy ! Component: 950 - total flux cleaned = -0.00057315 Jy ! Component: 1000 - total flux cleaned = -0.000451246 Jy ! Component: 1050 - total flux cleaned = -0.000360643 Jy ! Component: 1100 - total flux cleaned = -0.000153312 Jy ! Component: 1150 - total flux cleaned = -6.58234e-05 Jy ! Component: 1200 - total flux cleaned = 7.75237e-05 Jy ! Component: 1250 - total flux cleaned = 0.000134244 Jy ! Component: 1300 - total flux cleaned = 5.08431e-05 Jy ! Component: 1350 - total flux cleaned = 0.00021668 Jy ! Component: 1400 - total flux cleaned = 0.000189847 Jy ! Component: 1450 - total flux cleaned = 0.000270011 Jy ! Component: 1500 - total flux cleaned = 0.000269856 Jy ! Component: 1550 - total flux cleaned = 0.000401277 Jy ! Component: 1600 - total flux cleaned = 0.000322895 Jy ! Component: 1650 - total flux cleaned = 0.000399416 Jy ! Component: 1700 - total flux cleaned = 0.000398742 Jy ! Component: 1750 - total flux cleaned = 0.000348404 Jy ! Component: 1800 - total flux cleaned = 0.000423184 Jy ! Component: 1850 - total flux cleaned = 0.000472785 Jy ! Component: 1900 - total flux cleaned = 0.000497128 Jy ! Component: 1950 - total flux cleaned = 0.000545579 Jy ! Component: 2000 - total flux cleaned = 0.000593575 Jy ! Component: 2050 - total flux cleaned = 0.000640706 Jy ! Component: 2100 - total flux cleaned = 0.000663996 Jy ! Component: 2150 - total flux cleaned = 0.000733193 Jy ! Component: 2200 - total flux cleaned = 0.000733406 Jy ! Component: 2250 - total flux cleaned = 0.000802114 Jy ! Component: 2300 - total flux cleaned = 0.000824847 Jy ! Component: 2350 - total flux cleaned = 0.00095891 Jy ! Component: 2400 - total flux cleaned = 0.00102521 Jy ! Component: 2450 - total flux cleaned = 0.0010254 Jy ! Component: 2500 - total flux cleaned = 0.00104697 Jy ! Component: 2550 - total flux cleaned = 0.00104696 Jy ! Component: 2600 - total flux cleaned = 0.00111078 Jy ! Component: 2650 - total flux cleaned = 0.00117414 Jy ! Component: 2700 - total flux cleaned = 0.00129972 Jy ! Component: 2750 - total flux cleaned = 0.00129965 Jy ! Component: 2800 - total flux cleaned = 0.00125839 Jy ! Component: 2850 - total flux cleaned = 0.00134031 Jy ! Component: 2900 - total flux cleaned = 0.00138082 Jy ! Component: 2950 - total flux cleaned = 0.00142114 Jy ! Component: 3000 - total flux cleaned = 0.00148085 Jy ! Component: 3050 - total flux cleaned = 0.00148083 Jy ! Component: 3100 - total flux cleaned = 0.00150072 Jy ! Component: 3150 - total flux cleaned = 0.00153969 Jy ! Component: 3200 - total flux cleaned = 0.00155909 Jy ! Component: 3250 - total flux cleaned = 0.00167465 Jy ! Component: 3300 - total flux cleaned = 0.00163651 Jy ! Component: 3350 - total flux cleaned = 0.00161777 Jy ! Component: 3400 - total flux cleaned = 0.0016369 Jy ! Component: 3450 - total flux cleaned = 0.00169306 Jy ! Component: 3500 - total flux cleaned = 0.00176728 Jy ! Component: 3550 - total flux cleaned = 0.00174877 Jy ! Component: 3600 - total flux cleaned = 0.00174863 Jy ! Component: 3650 - total flux cleaned = 0.00171237 Jy ! Component: 3700 - total flux cleaned = 0.00173045 Jy ! Component: 3750 - total flux cleaned = 0.00174828 Jy ! Component: 3800 - total flux cleaned = 0.00173023 Jy ! Component: 3850 - total flux cleaned = 0.00176567 Jy ! Component: 3900 - total flux cleaned = 0.00173038 Jy ! Component: 3950 - total flux cleaned = 0.00174779 Jy ! Component: 4000 - total flux cleaned = 0.00171303 Jy ! Component: 4050 - total flux cleaned = 0.00166135 Jy ! Total flux subtracted in 4096 components = 0.00174708 Jy ! Clean residual min=-0.001063 max=0.000970 Jy/beam ! Clean residual mean=-0.000001 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 0.157628 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 375 components and 0.157628 Jy ![Exited script file: muppet] wmap "J0743-0440_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.142 x 7.196 at 1.26 degrees (North through East) ! Clean map min=-0.0022778 max=0.13994 Jy/beam ! Writing clean map to FITS file: J0743-0440_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.139944 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000307216 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.658585 0.658585 1.31717 2.63434 5.26868 10.5374 21.0747 42.1494 84.2988 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.139 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.142 x 7.196 at 1.26 degrees (North through East) ! Clean map min=-0.0022778 max=0.13994 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0743-0440_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:49:38 2019