! Started logfile: J0742-3829_S_2017_03_23_pus_uvs.log on Mon May 13 09:53:03 2019 obs J0742-3829_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J0742-3829_S_2017_03_23_pus_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.574277 visibilities/baseline/integration-bin. ! Found source: J0742-3829 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 15092 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0742-3829_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 552 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 436 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 348 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 948 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.979101Jy sigma=0.005652 ! Fit after self-cal, rms=0.927579Jy sigma=0.005374 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.421 mas, bmaj=6.116 mas, bpa=1.333 degrees ! Estimated noise=2364.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.053045 Jy ! Component: 100 - total flux cleaned = 0.068185 Jy ! Total flux subtracted in 100 components = 0.068185 Jy ! Clean residual min=-0.006522 max=0.008762 Jy/beam ! Clean residual mean=0.000008 rms=0.001780 Jy/beam ! Combined flux in latest and established models = 0.068185 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.068185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121110Jy sigma=0.000646 ! Fit after self-cal, rms=0.120367Jy sigma=0.000642 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.375 mas, bmaj=7.934 mas, bpa=0.3066 degrees ! Estimated noise=1222.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163988 Jy ! Component: 100 - total flux cleaned = 0.0235495 Jy ! Component: 150 - total flux cleaned = 0.026758 Jy ! Component: 200 - total flux cleaned = 0.0282109 Jy ! Total flux subtracted in 200 components = 0.0282109 Jy ! Clean residual min=-0.004578 max=0.006413 Jy/beam ! Clean residual mean=-0.000052 rms=0.001346 Jy/beam ! Combined flux in latest and established models = 0.0963959 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 34 components and 0.0963959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118282Jy sigma=0.000630 ! Fit after self-cal, rms=0.118036Jy sigma=0.000629 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.87 HN 1.00* KP 0.96 ! LA 0.96 MK 1.16 NL 1.00* OV 1.06 ! PT 0.97 SC 1.18 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.30 FD 1.20 HN 1.00* KP 0.97 ! LA 0.95 MK 1.06 NL 1.02 OV 1.21 ! PT 0.97 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 1.00* KP 0.90 ! LA 0.77 MK 1.09 NL 1.15 OV 0.99 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.05 HN 1.00* KP 1.00* ! LA 0.75 MK 0.89 NL 1.00* OV 1.07 ! PT 0.93 SC 1.00* ! ! ! Fit before self-cal, rms=0.118036Jy sigma=0.000629 ! Fit after self-cal, rms=0.118619Jy sigma=0.000625 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.454 mas, bmaj=8.06 mas, bpa=0.2036 degrees ! Estimated noise=1230.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00422683 Jy ! Component: 100 - total flux cleaned = 0.00414049 Jy ! Component: 150 - total flux cleaned = 0.00398839 Jy ! Component: 200 - total flux cleaned = 0.00385703 Jy ! Total flux subtracted in 200 components = 0.00385703 Jy ! Clean residual min=-0.003502 max=0.003511 Jy/beam ! Clean residual mean=-0.000003 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.100253 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.100253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118427Jy sigma=0.000624 ! Fit after self-cal, rms=0.118514Jy sigma=0.000623 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118514Jy sigma=0.000623 ! Fit after self-cal, rms=0.118812Jy sigma=0.000622 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.438 mas, bmaj=8.002 mas, bpa=0.2378 degrees ! Estimated noise=1217.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236465 Jy ! Component: 100 - total flux cleaned = 0.00224282 Jy ! Component: 150 - total flux cleaned = 0.00213679 Jy ! Component: 200 - total flux cleaned = 0.00204526 Jy ! Total flux subtracted in 200 components = 0.00204526 Jy ! Clean residual min=-0.003338 max=0.002836 Jy/beam ! Clean residual mean=0.000007 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.102298 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 59 components and 0.102298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118723Jy sigma=0.000622 ! Fit after self-cal, rms=0.118783Jy sigma=0.000621 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014143 Jy ! Component: 100 - total flux cleaned = 0.00135629 Jy ! Component: 150 - total flux cleaned = 0.00125286 Jy ! Component: 200 - total flux cleaned = 0.00120567 Jy ! Total flux subtracted in 200 components = 0.00120567 Jy ! Clean residual min=-0.003036 max=0.002757 Jy/beam ! Clean residual mean=0.000002 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.103504 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 62 components and 0.103504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118718Jy sigma=0.000621 ! Fit after self-cal, rms=0.118673Jy sigma=0.000621 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118673Jy sigma=0.000621 ! Fit after self-cal, rms=0.117974Jy sigma=0.000621 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.41 mas, bmaj=7.947 mas, bpa=0.3759 degrees ! Estimated noise=1203.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000978838 Jy ! Component: 100 - total flux cleaned = 0.000831977 Jy ! Component: 150 - total flux cleaned = 0.000752548 Jy ! Component: 200 - total flux cleaned = 0.000788092 Jy ! Total flux subtracted in 200 components = 0.000788092 Jy ! Clean residual min=-0.003158 max=0.002654 Jy/beam ! Clean residual mean=0.000009 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.104292 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 70 components and 0.104292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117935Jy sigma=0.000620 ! Fit after self-cal, rms=0.117935Jy sigma=0.000620 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000453624 Jy ! Component: 100 - total flux cleaned = 0.000372963 Jy ! Component: 150 - total flux cleaned = 0.000373882 Jy ! Component: 200 - total flux cleaned = 0.000406965 Jy ! Total flux subtracted in 200 components = 0.000406965 Jy ! Clean residual min=-0.003116 max=0.002584 Jy/beam ! Clean residual mean=0.000008 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.104699 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 75 components and 0.104699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117908Jy sigma=0.000620 ! Fit after self-cal, rms=0.117889Jy sigma=0.000620 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117889Jy sigma=0.000620 ! Fit after self-cal, rms=0.117790Jy sigma=0.000620 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.616 mas, bmaj=27.09 mas, bpa=4.328 degrees ! Estimated noise=1464.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.95892e-05 Jy ! Component: 100 - total flux cleaned = -4.76017e-06 Jy ! Component: 150 - total flux cleaned = 9.44313e-05 Jy ! Component: 200 - total flux cleaned = 9.42434e-05 Jy ! Total flux subtracted in 200 components = 9.42434e-05 Jy ! Clean residual min=-0.003344 max=0.002657 Jy/beam ! Clean residual mean=0.000016 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.104793 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 88 components and 0.104793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117781Jy sigma=0.000620 ! Fit after self-cal, rms=0.117788Jy sigma=0.000620 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000191088 Jy ! Component: 100 - total flux cleaned = -0.000244152 Jy ! Component: 150 - total flux cleaned = -0.000227258 Jy ! Component: 200 - total flux cleaned = -0.000226757 Jy ! Total flux subtracted in 200 components = -0.000226757 Jy ! Clean residual min=-0.003371 max=0.002713 Jy/beam ! Clean residual mean=0.000013 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.104566 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 92 components and 0.104566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117782Jy sigma=0.000620 ! Fit after self-cal, rms=0.117759Jy sigma=0.000620 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.399 mas, bmaj=7.926 mas, bpa=0.449 degrees ! Estimated noise=1199.05 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.399 x 7.926 at 0.449 degrees (North through East) ! Clean map min=-0.0038082 max=0.067974 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.443 mas, bmaj=6.143 mas, bpa=1.286 degrees ! Estimated noise=2316.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0525899 Jy ! Component: 100 - total flux cleaned = 0.0709193 Jy ! Component: 150 - total flux cleaned = 0.0806263 Jy ! Component: 200 - total flux cleaned = 0.0866644 Jy ! Total flux subtracted in 200 components = 0.0866644 Jy ! Clean residual min=-0.006982 max=0.008332 Jy/beam ! Clean residual mean=0.000013 rms=0.001703 Jy/beam ! Combined flux in latest and established models = 0.0866644 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0866644 Jy ! Inverting map and beam ! Estimated beam: bmin=3.399 mas, bmaj=7.926 mas, bpa=0.449 degrees ! Estimated noise=1199.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102458 Jy ! Component: 100 - total flux cleaned = 0.0143254 Jy ! Component: 150 - total flux cleaned = 0.0158809 Jy ! Component: 200 - total flux cleaned = 0.0168792 Jy ! Total flux subtracted in 200 components = 0.0168792 Jy ! Clean residual min=-0.003166 max=0.003032 Jy/beam ! Clean residual mean=0.000010 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.103544 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 56 components and 0.103544 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.616 mas, bmaj=27.09 mas, bpa=4.328 degrees ! Estimated noise=1464.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118974 Jy ! Component: 100 - total flux cleaned = 0.001369 Jy ! Component: 150 - total flux cleaned = 0.00147787 Jy ! Component: 200 - total flux cleaned = 0.0015727 Jy ! Total flux subtracted in 200 components = 0.0015727 Jy ! Clean residual min=-0.003286 max=0.002620 Jy/beam ! Clean residual mean=0.000016 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.105116 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.46907e-05 Jy ! Component: 100 - total flux cleaned = 0.000104724 Jy ! Component: 150 - total flux cleaned = 0.00015061 Jy ! Component: 200 - total flux cleaned = 0.00017136 Jy ! Total flux subtracted in 200 components = 0.00017136 Jy ! Clean residual min=-0.003276 max=0.002570 Jy/beam ! Clean residual mean=0.000016 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.105288 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 82 components and 0.105288 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.399 mas, bmaj=7.926 mas, bpa=0.449 degrees ! Estimated noise=1199.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000150427 Jy ! Component: 100 - total flux cleaned = 0.000208253 Jy ! Component: 150 - total flux cleaned = 0.00010115 Jy ! Component: 200 - total flux cleaned = 0.000148541 Jy ! Total flux subtracted in 200 components = 0.000148541 Jy ! Clean residual min=-0.003177 max=0.002702 Jy/beam ! Clean residual mean=0.000011 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.105436 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 96 components and 0.105436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117780Jy sigma=0.000620 ! Fit after self-cal, rms=0.117787Jy sigma=0.000620 wmodel J0742-3829_S_2017_03_23_pus_map.mod ! Writing 96 model components to file: J0742-3829_S_2017_03_23_pus_map.mod wobs J0742-3829_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J0742-3829_S_2017_03_23_pus_uvs.fits wwins J0742-3829_S_2017_03_23_pus_map.win ! wwins: Wrote 3 windows to J0742-3829_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000874787 Jy ! Component: 100 - total flux cleaned = -0.0012481 Jy ! Component: 150 - total flux cleaned = -0.00133682 Jy ! Component: 200 - total flux cleaned = -0.00117402 Jy ! Component: 250 - total flux cleaned = -0.000941031 Jy ! Component: 300 - total flux cleaned = -0.000755335 Jy ! Component: 350 - total flux cleaned = -0.00061321 Jy ! Component: 400 - total flux cleaned = -0.000338657 Jy ! Component: 450 - total flux cleaned = -0.0002058 Jy ! Component: 500 - total flux cleaned = -1.26804e-05 Jy ! Component: 550 - total flux cleaned = 0.000174657 Jy ! Component: 600 - total flux cleaned = 0.000386363 Jy ! Component: 650 - total flux cleaned = 0.000563105 Jy ! Component: 700 - total flux cleaned = 0.000735633 Jy ! Component: 750 - total flux cleaned = 0.000931432 Jy ! Component: 800 - total flux cleaned = 0.00103981 Jy ! Component: 850 - total flux cleaned = 0.00117217 Jy ! Component: 900 - total flux cleaned = 0.00119771 Jy ! Component: 950 - total flux cleaned = 0.00127421 Jy ! Component: 1000 - total flux cleaned = 0.00122423 Jy ! Component: 1050 - total flux cleaned = 0.00132242 Jy ! Component: 1100 - total flux cleaned = 0.00134588 Jy ! Component: 1150 - total flux cleaned = 0.00132199 Jy ! Component: 1200 - total flux cleaned = 0.00132188 Jy ! Component: 1250 - total flux cleaned = 0.0012764 Jy ! Component: 1300 - total flux cleaned = 0.00132143 Jy ! Component: 1350 - total flux cleaned = 0.00116663 Jy ! Component: 1400 - total flux cleaned = 0.00110168 Jy ! Component: 1450 - total flux cleaned = 0.000994877 Jy ! Component: 1500 - total flux cleaned = 0.00091073 Jy ! Component: 1550 - total flux cleaned = 0.000786216 Jy ! Component: 1600 - total flux cleaned = 0.000724609 Jy ! Component: 1650 - total flux cleaned = 0.000582563 Jy ! Component: 1700 - total flux cleaned = 0.000462279 Jy ! Component: 1750 - total flux cleaned = 0.00034416 Jy ! Component: 1800 - total flux cleaned = 0.00030505 Jy ! Component: 1850 - total flux cleaned = 0.000131594 Jy ! Component: 1900 - total flux cleaned = 1.73455e-05 Jy ! Component: 1950 - total flux cleaned = -9.51592e-05 Jy ! Component: 2000 - total flux cleaned = -0.00020617 Jy ! Component: 2050 - total flux cleaned = -0.000279505 Jy ! Component: 2100 - total flux cleaned = -0.000406335 Jy ! Component: 2150 - total flux cleaned = -0.000460061 Jy ! Component: 2200 - total flux cleaned = -0.000566742 Jy ! Component: 2250 - total flux cleaned = -0.000724254 Jy ! Component: 2300 - total flux cleaned = -0.000810634 Jy ! Component: 2350 - total flux cleaned = -0.000844833 Jy ! Component: 2400 - total flux cleaned = -0.000946238 Jy ! Component: 2450 - total flux cleaned = -0.0010131 Jy ! Component: 2500 - total flux cleaned = -0.00106265 Jy ! Component: 2550 - total flux cleaned = -0.00107911 Jy ! Component: 2600 - total flux cleaned = -0.00117665 Jy ! Component: 2650 - total flux cleaned = -0.0011767 Jy ! Component: 2700 - total flux cleaned = -0.00122468 Jy ! Component: 2750 - total flux cleaned = -0.00131931 Jy ! Component: 2800 - total flux cleaned = -0.00139713 Jy ! Component: 2850 - total flux cleaned = -0.00145898 Jy ! Component: 2900 - total flux cleaned = -0.00148964 Jy ! Component: 2950 - total flux cleaned = -0.00156548 Jy ! Component: 3000 - total flux cleaned = -0.00161055 Jy ! Component: 3050 - total flux cleaned = -0.00162549 Jy ! Component: 3100 - total flux cleaned = -0.00168479 Jy ! Component: 3150 - total flux cleaned = -0.00174349 Jy ! Component: 3200 - total flux cleaned = -0.00175803 Jy ! Component: 3250 - total flux cleaned = -0.00178689 Jy ! Component: 3300 - total flux cleaned = -0.00184413 Jy ! Component: 3350 - total flux cleaned = -0.00190102 Jy ! Component: 3400 - total flux cleaned = -0.00195736 Jy ! Component: 3450 - total flux cleaned = -0.00199925 Jy ! Component: 3500 - total flux cleaned = -0.00204102 Jy ! Component: 3550 - total flux cleaned = -0.00205489 Jy ! Component: 3600 - total flux cleaned = -0.00208232 Jy ! Component: 3650 - total flux cleaned = -0.00213673 Jy ! Component: 3700 - total flux cleaned = -0.00216368 Jy ! Component: 3750 - total flux cleaned = -0.00220386 Jy ! Component: 3800 - total flux cleaned = -0.00223056 Jy ! Component: 3850 - total flux cleaned = -0.00227005 Jy ! Component: 3900 - total flux cleaned = -0.00228323 Jy ! Component: 3950 - total flux cleaned = -0.00233518 Jy ! Component: 4000 - total flux cleaned = -0.0023481 Jy ! Component: 4050 - total flux cleaned = -0.00242472 Jy ! Total flux subtracted in 4096 components = -0.00239929 Jy ! Clean residual min=-0.000756 max=0.000696 Jy/beam ! Clean residual mean=0.000004 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.103037 Jy keep ! Adding 228 model components to the UV plane model. ! The established model now contains 324 components and 0.103037 Jy ![Exited script file: muppet] wmap "J0742-3829_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.399 x 7.926 at 0.449 degrees (North through East) ! Clean map min=-0.00322 max=0.068418 Jy/beam ! Writing clean map to FITS file: J0742-3829_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0684184 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000220242 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.965715 0.965715 1.93143 3.86286 7.72572 15.4514 30.9029 61.8058 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.068 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.399 x 7.926 at 0.449 degrees (North through East) ! Clean map min=-0.00322 max=0.068418 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0742-3829_S_2017_03_23_pus_uvs.log closed on Mon May 13 09:53:11 2019