! Started logfile: J0742+4900_S_2017_06_10_pus_uvs.log on Mon May 6 14:47:30 2019 obs J0742+4900_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0742+4900_S_2017_06_10_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.742222 visibilities/baseline/integration-bin. ! Found source: J0742+4900 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 1336 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0742+4900_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.671571Jy sigma=0.006587 ! Fit after self-cal, rms=0.647341Jy sigma=0.006389 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.854 mas, bmaj=12.62 mas, bpa=41.07 degrees ! Estimated noise=2839.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.277969 Jy ! Component: 100 - total flux cleaned = 0.3386 Jy ! Total flux subtracted in 100 components = 0.3386 Jy ! Clean residual min=-0.013456 max=0.017017 Jy/beam ! Clean residual mean=-0.000008 rms=0.003930 Jy/beam ! Combined flux in latest and established models = 0.3386 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.3386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080755Jy sigma=0.000751 ! Fit after self-cal, rms=0.080743Jy sigma=0.000751 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.411 mas, bmaj=12.99 mas, bpa=41.01 degrees ! Estimated noise=2312.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160277 Jy ! Component: 100 - total flux cleaned = 0.0148506 Jy ! Component: 150 - total flux cleaned = 0.0142692 Jy ! Component: 200 - total flux cleaned = 0.0136296 Jy ! Total flux subtracted in 200 components = 0.0136296 Jy ! Clean residual min=-0.009166 max=0.010930 Jy/beam ! Clean residual mean=0.000006 rms=0.002503 Jy/beam ! Combined flux in latest and established models = 0.35223 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 22 components and 0.35223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076195Jy sigma=0.000711 ! Fit after self-cal, rms=0.076178Jy sigma=0.000711 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.00* KP 1.01 ! LA 1.01 MK 1.08 NL 0.91 OV 0.99 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00* KP 1.00 ! LA 0.95 MK 1.03 NL 1.05 OV 1.05 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.05 HN 1.00* KP 0.97 ! LA 0.99 MK 1.07 NL 0.97 OV 0.96 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.18 HN 1.00* KP 1.00* ! LA 1.09 MK 0.93 NL 1.00* OV 1.00* ! PT 0.93 SC 1.00* ! ! ! Fit before self-cal, rms=0.076178Jy sigma=0.000711 ! Fit after self-cal, rms=0.071099Jy sigma=0.000669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.422 mas, bmaj=12.8 mas, bpa=41.15 degrees ! Estimated noise=2294.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275786 Jy ! Component: 100 - total flux cleaned = 0.00350391 Jy ! Component: 150 - total flux cleaned = 0.00390046 Jy ! Component: 200 - total flux cleaned = 0.00412645 Jy ! Total flux subtracted in 200 components = 0.00412645 Jy ! Clean residual min=-0.005525 max=0.005938 Jy/beam ! Clean residual mean=0.000038 rms=0.001505 Jy/beam ! Combined flux in latest and established models = 0.356356 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 37 components and 0.356356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070901Jy sigma=0.000667 ! Fit after self-cal, rms=0.070880Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070880Jy sigma=0.000667 ! Fit after self-cal, rms=0.070845Jy sigma=0.000667 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=12.78 mas, bpa=41.17 degrees ! Estimated noise=2294.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158386 Jy ! Component: 100 - total flux cleaned = 0.00202369 Jy ! Component: 150 - total flux cleaned = 0.00211913 Jy ! Component: 200 - total flux cleaned = 0.0022064 Jy ! Total flux subtracted in 200 components = 0.0022064 Jy ! Clean residual min=-0.005349 max=0.005846 Jy/beam ! Clean residual mean=0.000037 rms=0.001468 Jy/beam ! Combined flux in latest and established models = 0.358563 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 53 components and 0.358563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070763Jy sigma=0.000666 ! Fit after self-cal, rms=0.070758Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.61713e-05 Jy ! Component: 100 - total flux cleaned = 0.000176563 Jy ! Component: 150 - total flux cleaned = 0.000212282 Jy ! Component: 200 - total flux cleaned = 0.000246985 Jy ! Total flux subtracted in 200 components = 0.000246985 Jy ! Clean residual min=-0.005252 max=0.005853 Jy/beam ! Clean residual mean=0.000038 rms=0.001453 Jy/beam ! Combined flux in latest and established models = 0.35881 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 64 components and 0.35881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070720Jy sigma=0.000666 ! Fit after self-cal, rms=0.070717Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070717Jy sigma=0.000666 ! Fit after self-cal, rms=0.070728Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=12.77 mas, bpa=41.19 degrees ! Estimated noise=2295.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000907782 Jy ! Component: 100 - total flux cleaned = 0.0013093 Jy ! Component: 150 - total flux cleaned = 0.00138065 Jy ! Component: 200 - total flux cleaned = 0.00148082 Jy ! Total flux subtracted in 200 components = 0.00148082 Jy ! Clean residual min=-0.005155 max=0.005758 Jy/beam ! Clean residual mean=0.000037 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 0.36029 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 75 components and 0.36029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070685Jy sigma=0.000665 ! Fit after self-cal, rms=0.070684Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.08149e-05 Jy ! Component: 100 - total flux cleaned = 7.09625e-05 Jy ! Component: 150 - total flux cleaned = 7.22105e-05 Jy ! Component: 200 - total flux cleaned = 0.000101529 Jy ! Total flux subtracted in 200 components = 0.000101529 Jy ! Clean residual min=-0.005081 max=0.005773 Jy/beam ! Clean residual mean=0.000037 rms=0.001419 Jy/beam ! Combined flux in latest and established models = 0.360392 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.360392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070661Jy sigma=0.000665 ! Fit after self-cal, rms=0.070660Jy sigma=0.000665 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070660Jy sigma=0.000665 ! Fit after self-cal, rms=0.070682Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.839 mas, bmaj=12.74 mas, bpa=40.42 degrees ! Estimated noise=2731.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000559339 Jy ! Component: 100 - total flux cleaned = 0.00080313 Jy ! Component: 150 - total flux cleaned = 0.000936944 Jy ! Component: 200 - total flux cleaned = 0.00104594 Jy ! Total flux subtracted in 200 components = 0.00104594 Jy ! Clean residual min=-0.006304 max=0.005748 Jy/beam ! Clean residual mean=0.000067 rms=0.001751 Jy/beam ! Combined flux in latest and established models = 0.361438 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 88 components and 0.361438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070676Jy sigma=0.000665 ! Fit after self-cal, rms=0.070674Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.43855e-05 Jy ! Component: 100 - total flux cleaned = 0.000184834 Jy ! Component: 150 - total flux cleaned = 0.00026608 Jy ! Component: 200 - total flux cleaned = 0.000320599 Jy ! Total flux subtracted in 200 components = 0.000320599 Jy ! Clean residual min=-0.006281 max=0.005743 Jy/beam ! Clean residual mean=0.000069 rms=0.001735 Jy/beam ! Combined flux in latest and established models = 0.361759 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 96 components and 0.361758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070672Jy sigma=0.000665 ! Fit after self-cal, rms=0.070673Jy sigma=0.000665 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=12.75 mas, bpa=41.21 degrees ! Estimated noise=2297.35 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.419 x 12.75 at 41.21 degrees (North through East) ! Clean map min=-0.0049093 max=0.35452 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.863 mas, bmaj=12.38 mas, bpa=41.25 degrees ! Estimated noise=2812.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.275201 Jy ! Component: 100 - total flux cleaned = 0.335558 Jy ! Component: 150 - total flux cleaned = 0.351502 Jy ! Component: 200 - total flux cleaned = 0.356667 Jy ! Total flux subtracted in 200 components = 0.356667 Jy ! Clean residual min=-0.007084 max=0.006631 Jy/beam ! Clean residual mean=0.000004 rms=0.001878 Jy/beam ! Combined flux in latest and established models = 0.356667 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.356667 Jy ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=12.75 mas, bpa=41.21 degrees ! Estimated noise=2297.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00283588 Jy ! Component: 100 - total flux cleaned = 0.00329154 Jy ! Component: 150 - total flux cleaned = 0.00391584 Jy ! Component: 200 - total flux cleaned = 0.00422485 Jy ! Total flux subtracted in 200 components = 0.00422485 Jy ! Clean residual min=-0.005770 max=0.005780 Jy/beam ! Clean residual mean=0.000031 rms=0.001537 Jy/beam ! Combined flux in latest and established models = 0.360892 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 36 components and 0.360892 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.839 mas, bmaj=12.74 mas, bpa=40.42 degrees ! Estimated noise=2731.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000359655 Jy ! Component: 100 - total flux cleaned = 0.000503163 Jy ! Component: 150 - total flux cleaned = 0.000617034 Jy ! Component: 200 - total flux cleaned = 0.000711001 Jy ! Total flux subtracted in 200 components = 0.000711001 Jy ! Clean residual min=-0.006209 max=0.006030 Jy/beam ! Clean residual mean=0.000066 rms=0.001779 Jy/beam ! Combined flux in latest and established models = 0.361603 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122527 Jy ! Component: 100 - total flux cleaned = 0.000157419 Jy ! Component: 150 - total flux cleaned = 0.000156126 Jy ! Component: 200 - total flux cleaned = 0.000184082 Jy ! Total flux subtracted in 200 components = 0.000184082 Jy ! Clean residual min=-0.006110 max=0.005941 Jy/beam ! Clean residual mean=0.000068 rms=0.001757 Jy/beam ! Combined flux in latest and established models = 0.361787 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 63 components and 0.361787 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=12.75 mas, bpa=41.21 degrees ! Estimated noise=2297.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000352353 Jy ! Component: 100 - total flux cleaned = 0.000357353 Jy ! Component: 150 - total flux cleaned = 0.000244449 Jy ! Component: 200 - total flux cleaned = 0.000243792 Jy ! Total flux subtracted in 200 components = 0.000243792 Jy ! Clean residual min=-0.005242 max=0.005729 Jy/beam ! Clean residual mean=0.000039 rms=0.001447 Jy/beam ! Combined flux in latest and established models = 0.362031 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 77 components and 0.362031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070795Jy sigma=0.000666 ! Fit after self-cal, rms=0.070777Jy sigma=0.000665 wmodel J0742+4900_S_2017_06_10_pus_map.mod ! Writing 77 model components to file: J0742+4900_S_2017_06_10_pus_map.mod wobs J0742+4900_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0742+4900_S_2017_06_10_pus_uvs.fits wwins J0742+4900_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J0742+4900_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163883 Jy ! Component: 100 - total flux cleaned = 0.00199467 Jy ! Component: 150 - total flux cleaned = 0.0024009 Jy ! Component: 200 - total flux cleaned = 0.00247913 Jy ! Component: 250 - total flux cleaned = 0.00276319 Jy ! Component: 300 - total flux cleaned = 0.00276313 Jy ! Component: 350 - total flux cleaned = 0.00289238 Jy ! Component: 400 - total flux cleaned = 0.00313677 Jy ! Component: 450 - total flux cleaned = 0.00319522 Jy ! Component: 500 - total flux cleaned = 0.00325331 Jy ! Component: 550 - total flux cleaned = 0.00352783 Jy ! Component: 600 - total flux cleaned = 0.00389386 Jy ! Component: 650 - total flux cleaned = 0.00429754 Jy ! Component: 700 - total flux cleaned = 0.00473881 Jy ! Component: 750 - total flux cleaned = 0.00530921 Jy ! Component: 800 - total flux cleaned = 0.00581685 Jy ! Component: 850 - total flux cleaned = 0.00648998 Jy ! Component: 900 - total flux cleaned = 0.00701289 Jy ! Component: 950 - total flux cleaned = 0.00756366 Jy ! Component: 1000 - total flux cleaned = 0.00806057 Jy ! Component: 1050 - total flux cleaned = 0.00854466 Jy ! Component: 1100 - total flux cleaned = 0.00901644 Jy ! Component: 1150 - total flux cleaned = 0.00940065 Jy ! Component: 1200 - total flux cleaned = 0.0098881 Jy ! Component: 1250 - total flux cleaned = 0.0101818 Jy ! Component: 1300 - total flux cleaned = 0.0105409 Jy ! Component: 1350 - total flux cleaned = 0.0108918 Jy ! Component: 1400 - total flux cleaned = 0.0112356 Jy ! Component: 1450 - total flux cleaned = 0.0115052 Jy ! Component: 1500 - total flux cleaned = 0.0117701 Jy ! Component: 1550 - total flux cleaned = 0.0120957 Jy ! Component: 1600 - total flux cleaned = 0.0123194 Jy ! Component: 1650 - total flux cleaned = 0.0126024 Jy ! Component: 1700 - total flux cleaned = 0.0127886 Jy ! Component: 1750 - total flux cleaned = 0.0130627 Jy ! Component: 1800 - total flux cleaned = 0.0132725 Jy ! Component: 1850 - total flux cleaned = 0.0134498 Jy ! Component: 1900 - total flux cleaned = 0.0136826 Jy ! Component: 1950 - total flux cleaned = 0.013883 Jy ! Component: 2000 - total flux cleaned = 0.0139674 Jy ! Component: 2050 - total flux cleaned = 0.0140793 Jy ! Component: 2100 - total flux cleaned = 0.0142175 Jy ! Component: 2150 - total flux cleaned = 0.0143809 Jy ! Component: 2200 - total flux cleaned = 0.014542 Jy ! Component: 2250 - total flux cleaned = 0.0146743 Jy ! Component: 2300 - total flux cleaned = 0.0147788 Jy ! Component: 2350 - total flux cleaned = 0.0148306 Jy ! Component: 2400 - total flux cleaned = 0.0149586 Jy ! Component: 2450 - total flux cleaned = 0.0150599 Jy ! Component: 2500 - total flux cleaned = 0.0152102 Jy ! Component: 2550 - total flux cleaned = 0.0153835 Jy ! Component: 2600 - total flux cleaned = 0.0155059 Jy ! Component: 2650 - total flux cleaned = 0.015627 Jy ! Component: 2700 - total flux cleaned = 0.015723 Jy ! Component: 2750 - total flux cleaned = 0.0158417 Jy ! Component: 2800 - total flux cleaned = 0.0158885 Jy ! Component: 2850 - total flux cleaned = 0.0159813 Jy ! Component: 2900 - total flux cleaned = 0.0160273 Jy ! Component: 2950 - total flux cleaned = 0.01605 Jy ! Component: 3000 - total flux cleaned = 0.0161632 Jy ! Component: 3050 - total flux cleaned = 0.0163204 Jy ! Component: 3100 - total flux cleaned = 0.0164318 Jy ! Component: 3150 - total flux cleaned = 0.0165646 Jy ! Component: 3200 - total flux cleaned = 0.0167406 Jy ! Component: 3250 - total flux cleaned = 0.0168499 Jy ! Component: 3300 - total flux cleaned = 0.0170671 Jy ! Component: 3350 - total flux cleaned = 0.0171967 Jy ! Component: 3400 - total flux cleaned = 0.017347 Jy ! Component: 3450 - total flux cleaned = 0.0174751 Jy ! Component: 3500 - total flux cleaned = 0.0176661 Jy ! Component: 3550 - total flux cleaned = 0.0178562 Jy ! Component: 3600 - total flux cleaned = 0.0179823 Jy ! Component: 3650 - total flux cleaned = 0.0181705 Jy ! Component: 3700 - total flux cleaned = 0.0182747 Jy ! Component: 3750 - total flux cleaned = 0.0183785 Jy ! Component: 3800 - total flux cleaned = 0.0185233 Jy ! Component: 3850 - total flux cleaned = 0.0185851 Jy ! Component: 3900 - total flux cleaned = 0.0187083 Jy ! Component: 3950 - total flux cleaned = 0.018831 Jy ! Component: 4000 - total flux cleaned = 0.018933 Jy ! Component: 4050 - total flux cleaned = 0.0190347 Jy ! Total flux subtracted in 4096 components = 0.0190956 Jy ! Clean residual min=-0.001211 max=0.001285 Jy/beam ! Clean residual mean=-0.000001 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.381126 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 339 components and 0.381126 Jy ![Exited script file: muppet] wmap "J0742+4900_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.419 x 12.75 at 41.21 degrees (North through East) ! Clean map min=-0.0042604 max=0.35338 Jy/beam ! Writing clean map to FITS file: J0742+4900_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.353379 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000353407 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.300024 0.300024 0.600048 1.2001 2.40019 4.80039 9.60077 19.2015 38.4031 76.8062 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.353 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.419 x 12.75 at 41.21 degrees (North through East) ! Clean map min=-0.0042604 max=0.35338 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0742+4900_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:47:35 2019