! Started logfile: J0742+4900_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:35:05 2019 obs J0742+4900_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0742+4900_S_2017_03_27_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.866667 visibilities/baseline/integration-bin. ! Found source: J0742+4900 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 1248 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0742+4900_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.664917Jy sigma=0.006004 ! Fit after self-cal, rms=0.661978Jy sigma=0.005978 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.115 mas, bmaj=9.006 mas, bpa=48.4 degrees ! Estimated noise=2919.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.26686 Jy ! Component: 100 - total flux cleaned = 0.325105 Jy ! Total flux subtracted in 100 components = 0.325105 Jy ! Clean residual min=-0.011777 max=0.016391 Jy/beam ! Clean residual mean=-0.000010 rms=0.003454 Jy/beam ! Combined flux in latest and established models = 0.325105 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.325105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084313Jy sigma=0.000719 ! Fit after self-cal, rms=0.084307Jy sigma=0.000719 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.613 mas, bmaj=9.711 mas, bpa=50.33 degrees ! Estimated noise=2468.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160839 Jy ! Component: 100 - total flux cleaned = 0.0209534 Jy ! Component: 150 - total flux cleaned = 0.0221542 Jy ! Component: 200 - total flux cleaned = 0.0232522 Jy ! Total flux subtracted in 200 components = 0.0232522 Jy ! Clean residual min=-0.007222 max=0.009616 Jy/beam ! Clean residual mean=0.000021 rms=0.002149 Jy/beam ! Combined flux in latest and established models = 0.348358 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 24 components and 0.348358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081469Jy sigma=0.000694 ! Fit after self-cal, rms=0.081439Jy sigma=0.000693 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 0.98 KP 1.08 ! LA 0.98 MK 1.09 NL 0.98 OV 0.99 ! PT 0.98 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.05 HN 0.99 KP 0.96 ! LA 0.95 MK 1.03 NL 0.96 OV 1.08 ! PT 0.95 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.07 HN 0.98 KP 1.01 ! LA 0.98 MK 1.09 NL 0.95 OV 0.93 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.14 HN 0.99 KP 1.00* ! LA 1.02 MK 1.02 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.081439Jy sigma=0.000693 ! Fit after self-cal, rms=0.076916Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.616 mas, bmaj=9.736 mas, bpa=50.22 degrees ! Estimated noise=2467.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00189782 Jy ! Component: 100 - total flux cleaned = -0.0021363 Jy ! Component: 150 - total flux cleaned = -0.00219964 Jy ! Component: 200 - total flux cleaned = -0.00214444 Jy ! Total flux subtracted in 200 components = -0.00214444 Jy ! Clean residual min=-0.005190 max=0.004998 Jy/beam ! Clean residual mean=0.000091 rms=0.001427 Jy/beam ! Combined flux in latest and established models = 0.346213 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 46 components and 0.346213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076710Jy sigma=0.000648 ! Fit after self-cal, rms=0.076706Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076706Jy sigma=0.000648 ! Fit after self-cal, rms=0.076788Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.616 mas, bmaj=9.74 mas, bpa=50.19 degrees ! Estimated noise=2465.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118522 Jy ! Component: 100 - total flux cleaned = -0.00112738 Jy ! Component: 150 - total flux cleaned = -0.00112482 Jy ! Component: 200 - total flux cleaned = -0.00120222 Jy ! Total flux subtracted in 200 components = -0.00120222 Jy ! Clean residual min=-0.005092 max=0.005018 Jy/beam ! Clean residual mean=0.000090 rms=0.001389 Jy/beam ! Combined flux in latest and established models = 0.345011 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 52 components and 0.345011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076715Jy sigma=0.000647 ! Fit after self-cal, rms=0.076714Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000161694 Jy ! Component: 100 - total flux cleaned = -0.000194281 Jy ! Component: 150 - total flux cleaned = -0.000255919 Jy ! Component: 200 - total flux cleaned = -0.000284831 Jy ! Total flux subtracted in 200 components = -0.000284831 Jy ! Clean residual min=-0.004975 max=0.005069 Jy/beam ! Clean residual mean=0.000090 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.344726 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 60 components and 0.344726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076687Jy sigma=0.000647 ! Fit after self-cal, rms=0.076687Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076687Jy sigma=0.000647 ! Fit after self-cal, rms=0.076760Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.616 mas, bmaj=9.744 mas, bpa=50.17 degrees ! Estimated noise=2466.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000505745 Jy ! Component: 100 - total flux cleaned = -0.000536119 Jy ! Component: 150 - total flux cleaned = -0.000590643 Jy ! Component: 200 - total flux cleaned = -0.000640041 Jy ! Total flux subtracted in 200 components = -0.000640041 Jy ! Clean residual min=-0.004936 max=0.005096 Jy/beam ! Clean residual mean=0.000090 rms=0.001367 Jy/beam ! Combined flux in latest and established models = 0.344086 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 62 components and 0.344086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076737Jy sigma=0.000647 ! Fit after self-cal, rms=0.076740Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.15659e-06 Jy ! Component: 100 - total flux cleaned = -7.4244e-05 Jy ! Component: 150 - total flux cleaned = -9.44418e-05 Jy ! Component: 200 - total flux cleaned = -0.000132403 Jy ! Total flux subtracted in 200 components = -0.000132403 Jy ! Clean residual min=-0.004877 max=0.005107 Jy/beam ! Clean residual mean=0.000090 rms=0.001362 Jy/beam ! Combined flux in latest and established models = 0.343954 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 67 components and 0.343954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076730Jy sigma=0.000647 ! Fit after self-cal, rms=0.076731Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076731Jy sigma=0.000647 ! Fit after self-cal, rms=0.076757Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.337 mas, bmaj=10.79 mas, bpa=51.09 degrees ! Estimated noise=2937.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155495 Jy ! Component: 100 - total flux cleaned = -0.000227523 Jy ! Component: 150 - total flux cleaned = -0.000307651 Jy ! Component: 200 - total flux cleaned = -0.000374668 Jy ! Total flux subtracted in 200 components = -0.000374668 Jy ! Clean residual min=-0.005615 max=0.006023 Jy/beam ! Clean residual mean=0.000185 rms=0.001698 Jy/beam ! Combined flux in latest and established models = 0.343579 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 75 components and 0.343579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076759Jy sigma=0.000647 ! Fit after self-cal, rms=0.076759Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.02775e-05 Jy ! Component: 100 - total flux cleaned = -3.57332e-05 Jy ! Component: 150 - total flux cleaned = -6.19283e-05 Jy ! Component: 200 - total flux cleaned = -8.55186e-05 Jy ! Total flux subtracted in 200 components = -8.55186e-05 Jy ! Clean residual min=-0.005488 max=0.006004 Jy/beam ! Clean residual mean=0.000185 rms=0.001693 Jy/beam ! Combined flux in latest and established models = 0.343493 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 81 components and 0.343493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076761Jy sigma=0.000646 ! Fit after self-cal, rms=0.076762Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.616 mas, bmaj=9.748 mas, bpa=50.17 degrees ! Estimated noise=2466.35 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.616 x 9.748 at 50.17 degrees (North through East) ! Clean map min=-0.0069265 max=0.34218 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=9.021 mas, bpa=48.28 degrees ! Estimated noise=2915.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.266216 Jy ! Component: 100 - total flux cleaned = 0.324279 Jy ! Component: 150 - total flux cleaned = 0.339007 Jy ! Component: 200 - total flux cleaned = 0.341812 Jy ! Total flux subtracted in 200 components = 0.341812 Jy ! Clean residual min=-0.008276 max=0.007047 Jy/beam ! Clean residual mean=0.000029 rms=0.001952 Jy/beam ! Combined flux in latest and established models = 0.341812 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.341812 Jy ! Inverting map and beam ! Estimated beam: bmin=3.616 mas, bmaj=9.748 mas, bpa=50.17 degrees ! Estimated noise=2466.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118795 Jy ! Component: 100 - total flux cleaned = 0.00133286 Jy ! Component: 150 - total flux cleaned = 0.00165761 Jy ! Component: 200 - total flux cleaned = 0.00192915 Jy ! Total flux subtracted in 200 components = 0.00192915 Jy ! Clean residual min=-0.004968 max=0.005266 Jy/beam ! Clean residual mean=0.000089 rms=0.001427 Jy/beam ! Combined flux in latest and established models = 0.343742 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 38 components and 0.343742 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.337 mas, bmaj=10.79 mas, bpa=51.09 degrees ! Estimated noise=2937.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00058529 Jy ! Component: 100 - total flux cleaned = 0.00053865 Jy ! Component: 150 - total flux cleaned = 0.000333175 Jy ! Component: 200 - total flux cleaned = 0.000292543 Jy ! Total flux subtracted in 200 components = 0.000292543 Jy ! Clean residual min=-0.006006 max=0.006017 Jy/beam ! Clean residual mean=0.000187 rms=0.001716 Jy/beam ! Combined flux in latest and established models = 0.344034 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.4883e-05 Jy ! Component: 100 - total flux cleaned = -0.000108872 Jy ! Component: 150 - total flux cleaned = -0.000167535 Jy ! Component: 200 - total flux cleaned = -0.000193577 Jy ! Total flux subtracted in 200 components = -0.000193577 Jy ! Clean residual min=-0.005806 max=0.006012 Jy/beam ! Clean residual mean=0.000186 rms=0.001704 Jy/beam ! Combined flux in latest and established models = 0.343841 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 54 components and 0.34384 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.616 mas, bmaj=9.748 mas, bpa=50.17 degrees ! Estimated noise=2466.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.45805e-05 Jy ! Component: 100 - total flux cleaned = 1.3818e-05 Jy ! Component: 150 - total flux cleaned = -3.19169e-05 Jy ! Component: 200 - total flux cleaned = 4.86897e-05 Jy ! Total flux subtracted in 200 components = 4.86897e-05 Jy ! Clean residual min=-0.004835 max=0.005253 Jy/beam ! Clean residual mean=0.000091 rms=0.001378 Jy/beam ! Combined flux in latest and established models = 0.343889 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.343889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076813Jy sigma=0.000647 ! Fit after self-cal, rms=0.076799Jy sigma=0.000647 wmodel J0742+4900_S_2017_03_27_pus_map.mod ! Writing 69 model components to file: J0742+4900_S_2017_03_27_pus_map.mod wobs J0742+4900_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0742+4900_S_2017_03_27_pus_uvs.fits wwins J0742+4900_S_2017_03_27_pus_map.win ! wwins: Wrote 1 windows to J0742+4900_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000685783 Jy ! Component: 100 - total flux cleaned = 0.000685296 Jy ! Component: 150 - total flux cleaned = 0.000522704 Jy ! Component: 200 - total flux cleaned = 0.000445529 Jy ! Component: 250 - total flux cleaned = 0.000295826 Jy ! Component: 300 - total flux cleaned = 0.000295194 Jy ! Component: 350 - total flux cleaned = 0.000295391 Jy ! Component: 400 - total flux cleaned = 0.000429971 Jy ! Component: 450 - total flux cleaned = 0.000365927 Jy ! Component: 500 - total flux cleaned = 0.000303357 Jy ! Component: 550 - total flux cleaned = -1.13652e-06 Jy ! Component: 600 - total flux cleaned = -0.000177517 Jy ! Component: 650 - total flux cleaned = -0.000406081 Jy ! Component: 700 - total flux cleaned = -0.000574704 Jy ! Component: 750 - total flux cleaned = -0.00101354 Jy ! Component: 800 - total flux cleaned = -0.00122762 Jy ! Component: 850 - total flux cleaned = -0.00164634 Jy ! Component: 900 - total flux cleaned = -0.0017987 Jy ! Component: 950 - total flux cleaned = -0.00199962 Jy ! Component: 1000 - total flux cleaned = -0.00224476 Jy ! Component: 1050 - total flux cleaned = -0.0022924 Jy ! Component: 1100 - total flux cleaned = -0.00252958 Jy ! Component: 1150 - total flux cleaned = -0.00271566 Jy ! Component: 1200 - total flux cleaned = -0.00294355 Jy ! Component: 1250 - total flux cleaned = -0.00312211 Jy ! Component: 1300 - total flux cleaned = -0.00329761 Jy ! Component: 1350 - total flux cleaned = -0.00333998 Jy ! Component: 1400 - total flux cleaned = -0.0033396 Jy ! Component: 1450 - total flux cleaned = -0.00333983 Jy ! Component: 1500 - total flux cleaned = -0.00334048 Jy ! Component: 1550 - total flux cleaned = -0.00346147 Jy ! Component: 1600 - total flux cleaned = -0.00350069 Jy ! Component: 1650 - total flux cleaned = -0.00342308 Jy ! Component: 1700 - total flux cleaned = -0.00342329 Jy ! Component: 1750 - total flux cleaned = -0.00346134 Jy ! Component: 1800 - total flux cleaned = -0.00338741 Jy ! Component: 1850 - total flux cleaned = -0.00338734 Jy ! Component: 1900 - total flux cleaned = -0.0033871 Jy ! Component: 1950 - total flux cleaned = -0.00342234 Jy ! Component: 2000 - total flux cleaned = -0.00349244 Jy ! Component: 2050 - total flux cleaned = -0.00349209 Jy ! Component: 2100 - total flux cleaned = -0.00345787 Jy ! Component: 2150 - total flux cleaned = -0.00352582 Jy ! Component: 2200 - total flux cleaned = -0.00355955 Jy ! Component: 2250 - total flux cleaned = -0.00359322 Jy ! Component: 2300 - total flux cleaned = -0.0036589 Jy ! Component: 2350 - total flux cleaned = -0.0036913 Jy ! Component: 2400 - total flux cleaned = -0.00369083 Jy ! Component: 2450 - total flux cleaned = -0.00372211 Jy ! Component: 2500 - total flux cleaned = -0.0036271 Jy ! Component: 2550 - total flux cleaned = -0.00372113 Jy ! Component: 2600 - total flux cleaned = -0.00378299 Jy ! Component: 2650 - total flux cleaned = -0.00387506 Jy ! Component: 2700 - total flux cleaned = -0.0039354 Jy ! Component: 2750 - total flux cleaned = -0.00408565 Jy ! Component: 2800 - total flux cleaned = -0.00411512 Jy ! Component: 2850 - total flux cleaned = -0.0042334 Jy ! Component: 2900 - total flux cleaned = -0.00426255 Jy ! Component: 2950 - total flux cleaned = -0.00437904 Jy ! Component: 3000 - total flux cleaned = -0.00443685 Jy ! Component: 3050 - total flux cleaned = -0.00455149 Jy ! Component: 3100 - total flux cleaned = -0.00460829 Jy ! Component: 3150 - total flux cleaned = -0.00472108 Jy ! Component: 3200 - total flux cleaned = -0.00474897 Jy ! Component: 3250 - total flux cleaned = -0.00491534 Jy ! Component: 3300 - total flux cleaned = -0.00502518 Jy ! Component: 3350 - total flux cleaned = -0.00505265 Jy ! Component: 3400 - total flux cleaned = -0.00524235 Jy ! Component: 3450 - total flux cleaned = -0.00532314 Jy ! Component: 3500 - total flux cleaned = -0.0054299 Jy ! Component: 3550 - total flux cleaned = -0.00545661 Jy ! Component: 3600 - total flux cleaned = -0.00561454 Jy ! Component: 3650 - total flux cleaned = -0.00571915 Jy ! Component: 3700 - total flux cleaned = -0.0058488 Jy ! Component: 3750 - total flux cleaned = -0.00587451 Jy ! Component: 3800 - total flux cleaned = -0.00597712 Jy ! Component: 3850 - total flux cleaned = -0.00600269 Jy ! Component: 3900 - total flux cleaned = -0.0061543 Jy ! Component: 3950 - total flux cleaned = -0.00612914 Jy ! Component: 4000 - total flux cleaned = -0.00612909 Jy ! Component: 4050 - total flux cleaned = -0.00617897 Jy ! Total flux subtracted in 4096 components = -0.0062531 Jy ! Clean residual min=-0.001332 max=0.001581 Jy/beam ! Clean residual mean=-0.000002 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.337636 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 327 components and 0.337636 Jy ![Exited script file: muppet] wmap "J0742+4900_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.616 x 9.748 at 50.17 degrees (North through East) ! Clean map min=-0.0071377 max=0.34215 Jy/beam ! Writing clean map to FITS file: J0742+4900_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.342149 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0004155 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.364315 0.364315 0.72863 1.45726 2.91452 5.82904 11.6581 23.3162 46.6323 93.2647 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.342 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.616 x 9.748 at 50.17 degrees (North through East) ! Clean map min=-0.0071377 max=0.34215 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0742+4900_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:35:09 2019