! Started logfile: J0740+2852_S_2017_06_10_pus_uvs.log on Mon May 6 14:47:25 2019 obs J0740+2852_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0740+2852_S_2017_06_10_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.968616 visibilities/baseline/integration-bin. ! Found source: J0740+2852 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 19876 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0740+2852_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 617 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.966141Jy sigma=0.009757 ! Fit after self-cal, rms=0.946222Jy sigma=0.009581 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=5.837 mas, bpa=-3.175 degrees ! Estimated noise=820.576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0424616 Jy ! Component: 100 - total flux cleaned = 0.0518262 Jy ! Total flux subtracted in 100 components = 0.0518262 Jy ! Clean residual min=-0.002884 max=0.003256 Jy/beam ! Clean residual mean=-0.000004 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.0518262 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0518262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072889Jy sigma=0.000692 ! Fit after self-cal, rms=0.072622Jy sigma=0.000690 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.44 mas, bmaj=6.872 mas, bpa=-1.648 degrees ! Estimated noise=583.817 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00425886 Jy ! Component: 100 - total flux cleaned = 0.0060593 Jy ! Component: 150 - total flux cleaned = 0.00697906 Jy ! Component: 200 - total flux cleaned = 0.0071879 Jy ! Total flux subtracted in 200 components = 0.0071879 Jy ! Clean residual min=-0.002070 max=0.002212 Jy/beam ! Clean residual mean=-0.000004 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.0590141 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 21 components and 0.0590141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072374Jy sigma=0.000688 ! Fit after self-cal, rms=0.072381Jy sigma=0.000687 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 1.14 KP 1.04 ! LA 1.00 MK 1.15 NL 1.14 OV 1.04 ! PT 1.03 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.95 HN 0.94 KP 0.95 ! LA 1.00 MK 1.02 NL 1.05 OV 0.99 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.03 HN 0.97 KP 0.96 ! LA 1.02 MK 1.02 NL 0.96 OV 0.89 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.84 KP 1.00* ! LA 0.99 MK 0.98 NL 1.00* OV 1.00* ! PT 0.94 SC 1.00* ! ! ! Fit before self-cal, rms=0.072381Jy sigma=0.000687 ! Fit after self-cal, rms=0.074033Jy sigma=0.000685 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.442 mas, bmaj=6.857 mas, bpa=-1.018 degrees ! Estimated noise=584.551 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000715301 Jy ! Component: 100 - total flux cleaned = 0.000737127 Jy ! Component: 150 - total flux cleaned = 0.000711816 Jy ! Component: 200 - total flux cleaned = 0.000689814 Jy ! Total flux subtracted in 200 components = 0.000689814 Jy ! Clean residual min=-0.001816 max=0.002038 Jy/beam ! Clean residual mean=-0.000003 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.0597039 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 25 components and 0.0597039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074022Jy sigma=0.000685 ! Fit after self-cal, rms=0.074067Jy sigma=0.000685 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074067Jy sigma=0.000685 ! Fit after self-cal, rms=0.079729Jy sigma=0.000680 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.443 mas, bmaj=6.828 mas, bpa=-0.6911 degrees ! Estimated noise=585.732 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00023355 Jy ! Component: 100 - total flux cleaned = 0.000310553 Jy ! Component: 150 - total flux cleaned = 0.000322208 Jy ! Component: 200 - total flux cleaned = 0.000322059 Jy ! Total flux subtracted in 200 components = 0.000322059 Jy ! Clean residual min=-0.001699 max=0.001489 Jy/beam ! Clean residual mean=-0.000002 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0600259 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.0600259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079722Jy sigma=0.000680 ! Fit after self-cal, rms=0.079926Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.80351e-05 Jy ! Component: 100 - total flux cleaned = -7.83286e-05 Jy ! Component: 150 - total flux cleaned = -7.83964e-05 Jy ! Component: 200 - total flux cleaned = -8.67649e-05 Jy ! Total flux subtracted in 200 components = -8.67649e-05 Jy ! Clean residual min=-0.001649 max=0.001471 Jy/beam ! Clean residual mean=-0.000002 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.0599392 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.0599392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079922Jy sigma=0.000680 ! Fit after self-cal, rms=0.079923Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079923Jy sigma=0.000680 ! Fit after self-cal, rms=0.082731Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.44 mas, bmaj=6.808 mas, bpa=-0.7491 degrees ! Estimated noise=584.758 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119739 Jy ! Component: 100 - total flux cleaned = 0.000121622 Jy ! Component: 150 - total flux cleaned = 0.000110987 Jy ! Component: 200 - total flux cleaned = 9.15599e-05 Jy ! Total flux subtracted in 200 components = 9.15599e-05 Jy ! Clean residual min=-0.001640 max=0.001503 Jy/beam ! Clean residual mean=-0.000002 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.0600307 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.0600307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082725Jy sigma=0.000680 ! Fit after self-cal, rms=0.082776Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.04876e-05 Jy ! Component: 100 - total flux cleaned = -3.14233e-05 Jy ! Component: 150 - total flux cleaned = -3.13094e-05 Jy ! Component: 200 - total flux cleaned = -3.12103e-05 Jy ! Total flux subtracted in 200 components = -3.12103e-05 Jy ! Clean residual min=-0.001640 max=0.001495 Jy/beam ! Clean residual mean=-0.000002 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.0599995 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.0599995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082772Jy sigma=0.000680 ! Fit after self-cal, rms=0.082774Jy sigma=0.000680 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082774Jy sigma=0.000680 ! Fit after self-cal, rms=0.083104Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.368 mas, bmaj=10.52 mas, bpa=-7.122 degrees ! Estimated noise=728.538 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000281392 Jy ! Component: 100 - total flux cleaned = 0.000288519 Jy ! Component: 150 - total flux cleaned = 0.000294246 Jy ! Component: 200 - total flux cleaned = 0.000299028 Jy ! Total flux subtracted in 200 components = 0.000299028 Jy ! Clean residual min=-0.001504 max=0.001531 Jy/beam ! Clean residual mean=-0.000002 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.0602986 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 45 components and 0.0602986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083102Jy sigma=0.000680 ! Fit after self-cal, rms=0.083111Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.3868e-05 Jy ! Component: 100 - total flux cleaned = 2.3693e-05 Jy ! Component: 150 - total flux cleaned = 2.36433e-05 Jy ! Component: 200 - total flux cleaned = 2.74647e-05 Jy ! Total flux subtracted in 200 components = 2.74647e-05 Jy ! Clean residual min=-0.001502 max=0.001522 Jy/beam ! Clean residual mean=-0.000002 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.060326 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.060326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083110Jy sigma=0.000680 ! Fit after self-cal, rms=0.083111Jy sigma=0.000680 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.438 mas, bmaj=6.792 mas, bpa=-0.8068 degrees ! Estimated noise=583.991 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.438 x 6.792 at -0.8068 degrees (North through East) ! Clean map min=-0.0015362 max=0.056058 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.822 mas, bmaj=5.777 mas, bpa=-2.553 degrees ! Estimated noise=828.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0430042 Jy ! Component: 100 - total flux cleaned = 0.0525099 Jy ! Component: 150 - total flux cleaned = 0.0559709 Jy ! Component: 200 - total flux cleaned = 0.0575849 Jy ! Total flux subtracted in 200 components = 0.0575849 Jy ! Clean residual min=-0.002281 max=0.002349 Jy/beam ! Clean residual mean=-0.000002 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.0575849 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0575849 Jy ! Inverting map and beam ! Estimated beam: bmin=3.438 mas, bmaj=6.792 mas, bpa=-0.8068 degrees ! Estimated noise=583.991 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166279 Jy ! Component: 100 - total flux cleaned = 0.00197366 Jy ! Component: 150 - total flux cleaned = 0.00212884 Jy ! Component: 200 - total flux cleaned = 0.00223744 Jy ! Total flux subtracted in 200 components = 0.00223744 Jy ! Clean residual min=-0.001656 max=0.001522 Jy/beam ! Clean residual mean=-0.000002 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.0598224 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 30 components and 0.0598224 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.368 mas, bmaj=10.52 mas, bpa=-7.122 degrees ! Estimated noise=728.538 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000405892 Jy ! Component: 100 - total flux cleaned = 0.000430798 Jy ! Component: 150 - total flux cleaned = 0.000437759 Jy ! Component: 200 - total flux cleaned = 0.000443055 Jy ! Total flux subtracted in 200 components = 0.000443055 Jy ! Clean residual min=-0.001503 max=0.001524 Jy/beam ! Clean residual mean=-0.000002 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.0602654 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.10709e-08 Jy ! Component: 100 - total flux cleaned = 9.40747e-08 Jy ! Component: 150 - total flux cleaned = 1.45023e-07 Jy ! Component: 200 - total flux cleaned = 4.25613e-06 Jy ! Total flux subtracted in 200 components = 4.25613e-06 Jy ! Clean residual min=-0.001504 max=0.001520 Jy/beam ! Clean residual mean=-0.000002 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.0602697 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 40 components and 0.0602697 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.438 mas, bmaj=6.792 mas, bpa=-0.8068 degrees ! Estimated noise=583.991 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.4275e-06 Jy ! Component: 100 - total flux cleaned = -6.84953e-05 Jy ! Component: 150 - total flux cleaned = -0.000103172 Jy ! Component: 200 - total flux cleaned = -0.000124886 Jy ! Total flux subtracted in 200 components = -0.000124886 Jy ! Clean residual min=-0.001626 max=0.001510 Jy/beam ! Clean residual mean=-0.000001 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.0601448 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.0601448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083120Jy sigma=0.000680 ! Fit after self-cal, rms=0.083121Jy sigma=0.000680 wmodel J0740+2852_S_2017_06_10_pus_map.mod ! Writing 48 model components to file: J0740+2852_S_2017_06_10_pus_map.mod wobs J0740+2852_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0740+2852_S_2017_06_10_pus_uvs.fits wwins J0740+2852_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J0740+2852_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000599206 Jy ! Component: 100 - total flux cleaned = -0.00111846 Jy ! Component: 150 - total flux cleaned = -0.00161281 Jy ! Component: 200 - total flux cleaned = -0.0020655 Jy ! Component: 250 - total flux cleaned = -0.00240794 Jy ! Component: 300 - total flux cleaned = -0.00266963 Jy ! Component: 350 - total flux cleaned = -0.0029253 Jy ! Component: 400 - total flux cleaned = -0.00315269 Jy ! Component: 450 - total flux cleaned = -0.00330873 Jy ! Component: 500 - total flux cleaned = -0.00346157 Jy ! Component: 550 - total flux cleaned = -0.00361116 Jy ! Component: 600 - total flux cleaned = -0.00367446 Jy ! Component: 650 - total flux cleaned = -0.003758 Jy ! Component: 700 - total flux cleaned = -0.0038606 Jy ! Component: 750 - total flux cleaned = -0.00398076 Jy ! Component: 800 - total flux cleaned = -0.00396101 Jy ! Component: 850 - total flux cleaned = -0.00398036 Jy ! Component: 900 - total flux cleaned = -0.00396129 Jy ! Component: 950 - total flux cleaned = -0.00396149 Jy ! Component: 1000 - total flux cleaned = -0.00398041 Jy ! Component: 1050 - total flux cleaned = -0.00399893 Jy ! Component: 1100 - total flux cleaned = -0.00403523 Jy ! Component: 1150 - total flux cleaned = -0.00401673 Jy ! Component: 1200 - total flux cleaned = -0.00407015 Jy ! Component: 1250 - total flux cleaned = -0.00408755 Jy ! Component: 1300 - total flux cleaned = -0.00405256 Jy ! Component: 1350 - total flux cleaned = -0.00406969 Jy ! Component: 1400 - total flux cleaned = -0.00406977 Jy ! Component: 1450 - total flux cleaned = -0.00406991 Jy ! Component: 1500 - total flux cleaned = -0.00410363 Jy ! Component: 1550 - total flux cleaned = -0.00407032 Jy ! Component: 1600 - total flux cleaned = -0.00405403 Jy ! Component: 1650 - total flux cleaned = -0.00402148 Jy ! Component: 1700 - total flux cleaned = -0.00410311 Jy ! Component: 1750 - total flux cleaned = -0.00411921 Jy ! Component: 1800 - total flux cleaned = -0.00411906 Jy ! Component: 1850 - total flux cleaned = -0.00415065 Jy ! Component: 1900 - total flux cleaned = -0.00415073 Jy ! Component: 1950 - total flux cleaned = -0.0041505 Jy ! Component: 2000 - total flux cleaned = -0.00416572 Jy ! Component: 2050 - total flux cleaned = -0.00416572 Jy ! Component: 2100 - total flux cleaned = -0.00419617 Jy ! Component: 2150 - total flux cleaned = -0.00419625 Jy ! Component: 2200 - total flux cleaned = -0.00419618 Jy ! Component: 2250 - total flux cleaned = -0.00427037 Jy ! Component: 2300 - total flux cleaned = -0.00424088 Jy ! Component: 2350 - total flux cleaned = -0.00427012 Jy ! Component: 2400 - total flux cleaned = -0.00428486 Jy ! Component: 2450 - total flux cleaned = -0.00434255 Jy ! Component: 2500 - total flux cleaned = -0.00435705 Jy ! Component: 2550 - total flux cleaned = -0.00441419 Jy ! Component: 2600 - total flux cleaned = -0.00451307 Jy ! Component: 2650 - total flux cleaned = -0.00456897 Jy ! Component: 2700 - total flux cleaned = -0.00456903 Jy ! Component: 2750 - total flux cleaned = -0.00462451 Jy ! Component: 2800 - total flux cleaned = -0.00462466 Jy ! Component: 2850 - total flux cleaned = -0.00470671 Jy ! Component: 2900 - total flux cleaned = -0.00477455 Jy ! Component: 2950 - total flux cleaned = -0.00478794 Jy ! Component: 3000 - total flux cleaned = -0.00484154 Jy ! Component: 3050 - total flux cleaned = -0.00486822 Jy ! Component: 3100 - total flux cleaned = -0.00490784 Jy ! Component: 3150 - total flux cleaned = -0.00493406 Jy ! Component: 3200 - total flux cleaned = -0.00498646 Jy ! Component: 3250 - total flux cleaned = -0.0050254 Jy ! Component: 3300 - total flux cleaned = -0.0050512 Jy ! Component: 3350 - total flux cleaned = -0.00507684 Jy ! Component: 3400 - total flux cleaned = -0.00507675 Jy ! Component: 3450 - total flux cleaned = -0.00507675 Jy ! Component: 3500 - total flux cleaned = -0.00519069 Jy ! Component: 3550 - total flux cleaned = -0.00512769 Jy ! Component: 3600 - total flux cleaned = -0.00517787 Jy ! Component: 3650 - total flux cleaned = -0.00519039 Jy ! Component: 3700 - total flux cleaned = -0.00521526 Jy ! Component: 3750 - total flux cleaned = -0.0052153 Jy ! Component: 3800 - total flux cleaned = -0.00527668 Jy ! Component: 3850 - total flux cleaned = -0.00532545 Jy ! Component: 3900 - total flux cleaned = -0.00530112 Jy ! Component: 3950 - total flux cleaned = -0.00531316 Jy ! Component: 4000 - total flux cleaned = -0.00533726 Jy ! Component: 4050 - total flux cleaned = -0.0053372 Jy ! Total flux subtracted in 4096 components = -0.00534912 Jy ! Clean residual min=-0.000669 max=0.000732 Jy/beam ! Clean residual mean=-0.000001 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.0547957 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 352 components and 0.0547957 Jy ![Exited script file: muppet] wmap "J0740+2852_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.438 x 6.792 at -0.8068 degrees (North through East) ! Clean map min=-0.0015299 max=0.055915 Jy/beam ! Writing clean map to FITS file: J0740+2852_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0559148 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000217791 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.16852 1.16852 2.33703 4.67407 9.34813 18.6963 37.3925 74.7851 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.055 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.438 x 6.792 at -0.8068 degrees (North through East) ! Clean map min=-0.0015299 max=0.055915 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0740+2852_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:47:30 2019