! Started logfile: J0739+0137_S_2017_05_27_pus_uvs.log on Fri May 3 11:00:07 2019 obs J0739+0137_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0739+0137_S_2017_05_27_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.697222 visibilities/baseline/integration-bin. ! Found source: J0739+0137 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 1004 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0739+0137_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.647811Jy sigma=0.082390 ! Fit after self-cal, rms=0.660170Jy sigma=0.082406 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.178 mas, bmaj=6.566 mas, bpa=9.507 degrees ! Estimated noise=755.451 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0606105 Jy ! Component: 100 - total flux cleaned = 0.103116 Jy ! Total flux subtracted in 100 components = 0.103116 Jy ! Clean residual min=-0.028822 max=0.057574 Jy/beam ! Clean residual mean=-0.000241 rms=0.009874 Jy/beam ! Combined flux in latest and established models = 0.103116 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.103116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.430848Jy sigma=0.004234 ! Fit after self-cal, rms=0.430428Jy sigma=0.004228 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.25 mas, bmaj=6.733 mas, bpa=11.22 degrees ! Estimated noise=885.276 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-54.5, 44.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0886782 Jy ! Component: 100 - total flux cleaned = 0.15577 Jy ! Component: 150 - total flux cleaned = 0.210821 Jy ! Component: 200 - total flux cleaned = 0.258416 Jy ! Total flux subtracted in 200 components = 0.258416 Jy ! Clean residual min=-0.031343 max=0.054490 Jy/beam ! Clean residual mean=-0.000623 rms=0.010871 Jy/beam ! Combined flux in latest and established models = 0.361531 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 45 components and 0.361531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.301382Jy sigma=0.003672 ! Fit after self-cal, rms=0.291341Jy sigma=0.003582 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 7.81 FD 1.00* HN 1.09 KP 0.68 ! LA 0.70 MK 1.20 NL 0.63 OV 0.96 ! PT 0.67 SC 0.58 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.10 KP 0.62 ! LA 0.61 MK 1.17 NL 0.67 OV 0.99 ! PT 0.68 SC 0.64 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.05 KP 0.62 ! LA 0.63 MK 1.14 NL 0.72 OV 0.85 ! PT 0.66 SC 0.63 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.26 KP 1.00* ! LA 0.71 MK 0.92 NL 1.00* OV 1.00* ! PT 0.63 SC 1.00* ! ! ! Fit before self-cal, rms=0.291341Jy sigma=0.003582 ! Fit after self-cal, rms=0.107494Jy sigma=0.001262 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.029 mas, bmaj=7.643 mas, bpa=3.121 degrees ! Estimated noise=1735.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00552684 Jy ! Component: 100 - total flux cleaned = -0.00374336 Jy ! Component: 150 - total flux cleaned = -0.00323519 Jy ! Component: 200 - total flux cleaned = -0.00278961 Jy ! Total flux subtracted in 200 components = -0.00278961 Jy ! Clean residual min=-0.016413 max=0.020588 Jy/beam ! Clean residual mean=-0.000029 rms=0.004359 Jy/beam ! Combined flux in latest and established models = 0.358742 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 67 components and 0.358742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099289Jy sigma=0.001120 ! Fit after self-cal, rms=0.087802Jy sigma=0.000949 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087802Jy sigma=0.000949 ! Fit after self-cal, rms=0.081950Jy sigma=0.000915 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.945 mas, bmaj=7.63 mas, bpa=2.658 degrees ! Estimated noise=1770.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267533 Jy ! Component: 100 - total flux cleaned = 0.00443305 Jy ! Component: 150 - total flux cleaned = 0.00533382 Jy ! Component: 200 - total flux cleaned = 0.00559509 Jy ! Total flux subtracted in 200 components = 0.00559509 Jy ! Clean residual min=-0.013705 max=0.016393 Jy/beam ! Clean residual mean=0.000021 rms=0.003526 Jy/beam ! Combined flux in latest and established models = 0.364337 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 76 components and 0.364337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077691Jy sigma=0.000872 ! Fit after self-cal, rms=0.077361Jy sigma=0.000869 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-50, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129953 Jy ! Component: 100 - total flux cleaned = 0.0139821 Jy ! Component: 150 - total flux cleaned = 0.0150758 Jy ! Component: 200 - total flux cleaned = 0.0153287 Jy ! Total flux subtracted in 200 components = 0.0153287 Jy ! Clean residual min=-0.013096 max=0.011729 Jy/beam ! Clean residual mean=0.000063 rms=0.002927 Jy/beam ! Combined flux in latest and established models = 0.379666 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 94 components and 0.379666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072501Jy sigma=0.000807 ! Fit after self-cal, rms=0.072371Jy sigma=0.000805 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072371Jy sigma=0.000805 ! Fit after self-cal, rms=0.069331Jy sigma=0.000798 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.902 mas, bmaj=7.591 mas, bpa=2.052 degrees ! Estimated noise=1759.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212191 Jy ! Component: 100 - total flux cleaned = 0.00440398 Jy ! Component: 150 - total flux cleaned = 0.00481029 Jy ! Component: 200 - total flux cleaned = 0.00517728 Jy ! Total flux subtracted in 200 components = 0.00517728 Jy ! Clean residual min=-0.010793 max=0.010965 Jy/beam ! Clean residual mean=0.000013 rms=0.002577 Jy/beam ! Combined flux in latest and established models = 0.384843 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 110 components and 0.384843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067334Jy sigma=0.000774 ! Fit after self-cal, rms=0.067292Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (61, -118.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00954748 Jy ! Component: 100 - total flux cleaned = 0.015076 Jy ! Component: 150 - total flux cleaned = 0.0198186 Jy ! Component: 200 - total flux cleaned = 0.0239883 Jy ! Total flux subtracted in 200 components = 0.0239883 Jy ! Clean residual min=-0.009051 max=0.007426 Jy/beam ! Clean residual mean=-0.000013 rms=0.002121 Jy/beam ! Combined flux in latest and established models = 0.408831 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 139 components and 0.408831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064722Jy sigma=0.000745 ! Fit after self-cal, rms=0.064684Jy sigma=0.000745 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064684Jy sigma=0.000745 ! Fit after self-cal, rms=0.063509Jy sigma=0.000742 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.064 mas, bmaj=12.92 mas, bpa=16.95 degrees ! Estimated noise=2036.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252187 Jy ! Component: 100 - total flux cleaned = 0.00473156 Jy ! Component: 150 - total flux cleaned = 0.00621259 Jy ! Component: 200 - total flux cleaned = 0.00728681 Jy ! Total flux subtracted in 200 components = 0.00728681 Jy ! Clean residual min=-0.009421 max=0.006478 Jy/beam ! Clean residual mean=-0.000041 rms=0.002370 Jy/beam ! Combined flux in latest and established models = 0.416118 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 176 components and 0.416118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062745Jy sigma=0.000733 ! Fit after self-cal, rms=0.062701Jy sigma=0.000732 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000547311 Jy ! Component: 100 - total flux cleaned = 0.00139173 Jy ! Component: 150 - total flux cleaned = 0.00216124 Jy ! Component: 200 - total flux cleaned = 0.00305675 Jy ! Total flux subtracted in 200 components = 0.00305675 Jy ! Clean residual min=-0.008959 max=0.006478 Jy/beam ! Clean residual mean=-0.000047 rms=0.002314 Jy/beam ! Combined flux in latest and established models = 0.419175 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 195 components and 0.419175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062451Jy sigma=0.000728 ! Fit after self-cal, rms=0.062391Jy sigma=0.000728 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.878 mas, bmaj=7.592 mas, bpa=1.672 degrees ! Estimated noise=1759.24 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.878 x 7.592 at 1.672 degrees (North through East) ! Clean map min=-0.011181 max=0.15387 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.461 mas, bmaj=6.932 mas, bpa=0.1827 degrees ! Estimated noise=2013.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.14983 Jy ! Component: 100 - total flux cleaned = 0.216339 Jy ! Component: 150 - total flux cleaned = 0.257339 Jy ! Component: 200 - total flux cleaned = 0.286181 Jy ! Total flux subtracted in 200 components = 0.286181 Jy ! Clean residual min=-0.017832 max=0.021502 Jy/beam ! Clean residual mean=-0.000159 rms=0.005299 Jy/beam ! Combined flux in latest and established models = 0.286181 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.286181 Jy ! Inverting map and beam ! Estimated beam: bmin=3.878 mas, bmaj=7.592 mas, bpa=1.672 degrees ! Estimated noise=1759.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0281641 Jy ! Component: 100 - total flux cleaned = 0.0468634 Jy ! Component: 150 - total flux cleaned = 0.0612144 Jy ! Component: 200 - total flux cleaned = 0.0731021 Jy ! Total flux subtracted in 200 components = 0.0731021 Jy ! Clean residual min=-0.012585 max=0.012716 Jy/beam ! Clean residual mean=-0.000138 rms=0.003477 Jy/beam ! Combined flux in latest and established models = 0.359283 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 75 components and 0.359283 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.064 mas, bmaj=12.92 mas, bpa=16.95 degrees ! Estimated noise=2036.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147266 Jy ! Component: 100 - total flux cleaned = 0.025202 Jy ! Component: 150 - total flux cleaned = 0.0336755 Jy ! Component: 200 - total flux cleaned = 0.0399657 Jy ! Total flux subtracted in 200 components = 0.0399657 Jy ! Clean residual min=-0.011835 max=0.010268 Jy/beam ! Clean residual mean=-0.000082 rms=0.003115 Jy/beam ! Combined flux in latest and established models = 0.399249 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00488533 Jy ! Component: 100 - total flux cleaned = 0.00829149 Jy ! Component: 150 - total flux cleaned = 0.0113131 Jy ! Component: 200 - total flux cleaned = 0.0135043 Jy ! Total flux subtracted in 200 components = 0.0135043 Jy ! Clean residual min=-0.010050 max=0.008806 Jy/beam ! Clean residual mean=-0.000050 rms=0.002712 Jy/beam ! Combined flux in latest and established models = 0.412753 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 156 components and 0.412753 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.878 mas, bmaj=7.592 mas, bpa=1.672 degrees ! Estimated noise=1759.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000143354 Jy ! Component: 100 - total flux cleaned = 0.00233042 Jy ! Component: 150 - total flux cleaned = 0.00234039 Jy ! Component: 200 - total flux cleaned = 0.00267334 Jy ! Total flux subtracted in 200 components = 0.00267334 Jy ! Clean residual min=-0.008021 max=0.008562 Jy/beam ! Clean residual mean=-0.000036 rms=0.002206 Jy/beam ! Combined flux in latest and established models = 0.415426 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 175 components and 0.415426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063251Jy sigma=0.000751 ! Fit after self-cal, rms=0.063068Jy sigma=0.000749 wmodel J0739+0137_S_2017_05_27_pus_map.mod ! Writing 175 model components to file: J0739+0137_S_2017_05_27_pus_map.mod wobs J0739+0137_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0739+0137_S_2017_05_27_pus_uvs.fits wwins J0739+0137_S_2017_05_27_pus_map.win ! wwins: Wrote 4 windows to J0739+0137_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000402559 Jy ! Component: 100 - total flux cleaned = -0.00119128 Jy ! Component: 150 - total flux cleaned = -0.00119849 Jy ! Component: 200 - total flux cleaned = -0.00120238 Jy ! Component: 250 - total flux cleaned = -0.00141114 Jy ! Component: 300 - total flux cleaned = -0.00180622 Jy ! Component: 350 - total flux cleaned = -0.0024593 Jy ! Component: 400 - total flux cleaned = -0.00317221 Jy ! Component: 450 - total flux cleaned = -0.00394492 Jy ! Component: 500 - total flux cleaned = -0.00460657 Jy ! Component: 550 - total flux cleaned = -0.00532303 Jy ! Component: 600 - total flux cleaned = -0.00594063 Jy ! Component: 650 - total flux cleaned = -0.00646432 Jy ! Component: 700 - total flux cleaned = -0.00682675 Jy ! Component: 750 - total flux cleaned = -0.00731956 Jy ! Component: 800 - total flux cleaned = -0.00786883 Jy ! Component: 850 - total flux cleaned = -0.00840418 Jy ! Component: 900 - total flux cleaned = -0.00892679 Jy ! Component: 950 - total flux cleaned = -0.00924551 Jy ! Component: 1000 - total flux cleaned = -0.00968267 Jy ! Component: 1050 - total flux cleaned = -0.0100492 Jy ! Component: 1100 - total flux cleaned = -0.0104668 Jy ! Component: 1150 - total flux cleaned = -0.0108764 Jy ! Component: 1200 - total flux cleaned = -0.0113917 Jy ! Component: 1250 - total flux cleaned = -0.0118414 Jy ! Component: 1300 - total flux cleaned = -0.0122273 Jy ! Component: 1350 - total flux cleaned = -0.0125527 Jy ! Component: 1400 - total flux cleaned = -0.0129796 Jy ! Component: 1450 - total flux cleaned = -0.013347 Jy ! Component: 1500 - total flux cleaned = -0.0137604 Jy ! Component: 1550 - total flux cleaned = -0.014217 Jy ! Component: 1600 - total flux cleaned = -0.0146657 Jy ! Component: 1650 - total flux cleaned = -0.0149111 Jy ! Component: 1700 - total flux cleaned = -0.0152988 Jy ! Component: 1750 - total flux cleaned = -0.0156337 Jy ! Component: 1800 - total flux cleaned = -0.0159642 Jy ! Component: 1850 - total flux cleaned = -0.0163373 Jy ! Component: 1900 - total flux cleaned = -0.0166594 Jy ! Component: 1950 - total flux cleaned = -0.0170225 Jy ! Component: 2000 - total flux cleaned = -0.017247 Jy ! Component: 2050 - total flux cleaned = -0.0176449 Jy ! Component: 2100 - total flux cleaned = -0.0179068 Jy ! Component: 2150 - total flux cleaned = -0.0181662 Jy ! Component: 2200 - total flux cleaned = -0.0185507 Jy ! Component: 2250 - total flux cleaned = -0.0188461 Jy ! Component: 2300 - total flux cleaned = -0.0191384 Jy ! Component: 2350 - total flux cleaned = -0.0193037 Jy ! Component: 2400 - total flux cleaned = -0.0194679 Jy ! Component: 2450 - total flux cleaned = -0.0196308 Jy ! Component: 2500 - total flux cleaned = -0.0198331 Jy ! Component: 2550 - total flux cleaned = -0.0199937 Jy ! Component: 2600 - total flux cleaned = -0.0200734 Jy ! Component: 2650 - total flux cleaned = -0.0202714 Jy ! Component: 2700 - total flux cleaned = -0.0204288 Jy ! Component: 2750 - total flux cleaned = -0.0205462 Jy ! Component: 2800 - total flux cleaned = -0.0205464 Jy ! Component: 2850 - total flux cleaned = -0.0207016 Jy ! Component: 2900 - total flux cleaned = -0.0207402 Jy ! Component: 2950 - total flux cleaned = -0.0209318 Jy ! Component: 3000 - total flux cleaned = -0.0210461 Jy ! Component: 3050 - total flux cleaned = -0.0211982 Jy ! Component: 3100 - total flux cleaned = -0.0213117 Jy ! Component: 3150 - total flux cleaned = -0.0213495 Jy ! Component: 3200 - total flux cleaned = -0.0214624 Jy ! Component: 3250 - total flux cleaned = -0.0216503 Jy ! Component: 3300 - total flux cleaned = -0.0217251 Jy ! Component: 3350 - total flux cleaned = -0.0217626 Jy ! Component: 3400 - total flux cleaned = -0.0219863 Jy ! Component: 3450 - total flux cleaned = -0.0221354 Jy ! Component: 3500 - total flux cleaned = -0.0221727 Jy ! Component: 3550 - total flux cleaned = -0.0223218 Jy ! Component: 3600 - total flux cleaned = -0.0223963 Jy ! Component: 3650 - total flux cleaned = -0.0223964 Jy ! Component: 3700 - total flux cleaned = -0.0224713 Jy ! Component: 3750 - total flux cleaned = -0.0225089 Jy ! Component: 3800 - total flux cleaned = -0.0224713 Jy ! Component: 3850 - total flux cleaned = -0.0225467 Jy ! Component: 3900 - total flux cleaned = -0.0225465 Jy ! Component: 3950 - total flux cleaned = -0.0225465 Jy ! Component: 4000 - total flux cleaned = -0.0225848 Jy ! Component: 4050 - total flux cleaned = -0.0226231 Jy ! Total flux subtracted in 4096 components = -0.0227006 Jy ! Clean residual min=-0.002004 max=0.002155 Jy/beam ! Clean residual mean=-0.000013 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.392726 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 433 components and 0.392726 Jy ![Exited script file: muppet] wmap "J0739+0137_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.878 x 7.592 at 1.672 degrees (North through East) ! Clean map min=-0.007267 max=0.1639 Jy/beam ! Writing clean map to FITS file: J0739+0137_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.163897 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000676712 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.23867 1.23867 2.47734 4.95468 9.90935 19.8187 39.6374 79.2748 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.163 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.878 x 7.592 at 1.672 degrees (North through East) ! Clean map min=-0.007267 max=0.1639 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0739+0137_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:00:14 2019