! Started logfile: J0739+0137_S_2017_02_19_pus_uvs.log on Sat May 4 18:46:04 2019 obs J0739+0137_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0739+0137_S_2017_02_19_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.522222 visibilities/baseline/integration-bin. ! Found source: J0739+0137 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 752 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0739+0137_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.582624Jy sigma=0.004760 ! Fit after self-cal, rms=0.578382Jy sigma=0.004726 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.971 mas, bmaj=10.41 mas, bpa=23.26 degrees ! Estimated noise=4089.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.337943 Jy ! Component: 100 - total flux cleaned = 0.448837 Jy ! Total flux subtracted in 100 components = 0.448837 Jy ! Clean residual min=-0.052662 max=0.093926 Jy/beam ! Clean residual mean=-0.000021 rms=0.018322 Jy/beam ! Combined flux in latest and established models = 0.448837 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.448837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199990Jy sigma=0.001504 ! Fit after self-cal, rms=0.199739Jy sigma=0.001501 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.414 mas, bmaj=11.3 mas, bpa=23.25 degrees ! Estimated noise=3524.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0771733 Jy ! Component: 100 - total flux cleaned = 0.122918 Jy ! Component: 150 - total flux cleaned = 0.152136 Jy ! Component: 200 - total flux cleaned = 0.171066 Jy ! Total flux subtracted in 200 components = 0.171066 Jy ! Clean residual min=-0.042696 max=0.088411 Jy/beam ! Clean residual mean=0.000020 rms=0.015302 Jy/beam ! Combined flux in latest and established models = 0.619903 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 53 components and 0.619903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161664Jy sigma=0.001227 ! Fit after self-cal, rms=0.160419Jy sigma=0.001214 ! Inverting map ! Added new window around map position (-9, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0731011 Jy ! Component: 100 - total flux cleaned = 0.105793 Jy ! Component: 150 - total flux cleaned = 0.129131 Jy ! Component: 200 - total flux cleaned = 0.147578 Jy ! Total flux subtracted in 200 components = 0.147578 Jy ! Clean residual min=-0.024124 max=0.025020 Jy/beam ! Clean residual mean=0.000024 rms=0.007368 Jy/beam ! Combined flux in latest and established models = 0.767481 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 88 components and 0.767481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121988Jy sigma=0.000892 ! Fit after self-cal, rms=0.120013Jy sigma=0.000876 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.96 HN 1.05 KP 1.05 ! LA 0.96 MK 1.00* NL 0.86 OV 1.07 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.01 KP 1.00 ! LA 0.96 MK 1.00* NL 1.07 OV 1.11 ! PT 1.00* SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.06 HN 1.01 KP 0.87 ! LA 0.76 MK 1.00* NL 1.17 OV 0.97 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.23 HN 0.89 KP 1.00* ! LA 0.82 MK 1.00* NL 1.00* OV 1.03 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.120013Jy sigma=0.000876 ! Fit after self-cal, rms=0.086574Jy sigma=0.000699 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.433 mas, bmaj=11.4 mas, bpa=23.26 degrees ! Estimated noise=3461.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105917 Jy ! Component: 100 - total flux cleaned = 0.0144364 Jy ! Component: 150 - total flux cleaned = 0.016345 Jy ! Component: 200 - total flux cleaned = 0.0151083 Jy ! Total flux subtracted in 200 components = 0.0151083 Jy ! Clean residual min=-0.012430 max=0.013561 Jy/beam ! Clean residual mean=0.000016 rms=0.003611 Jy/beam ! Combined flux in latest and established models = 0.782589 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 136 components and 0.782589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082446Jy sigma=0.000663 ! Fit after self-cal, rms=0.082121Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082121Jy sigma=0.000660 ! Fit after self-cal, rms=0.081850Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.437 mas, bmaj=11.41 mas, bpa=23.24 degrees ! Estimated noise=3453.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130251 Jy ! Component: 100 - total flux cleaned = -7.53315e-05 Jy ! Component: 150 - total flux cleaned = -0.00100847 Jy ! Component: 200 - total flux cleaned = -0.00139298 Jy ! Total flux subtracted in 200 components = -0.00139298 Jy ! Clean residual min=-0.010191 max=0.011175 Jy/beam ! Clean residual mean=0.000014 rms=0.002876 Jy/beam ! Combined flux in latest and established models = 0.781196 Jy selfcal ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 183 components and 0.781196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080388Jy sigma=0.000646 ! Fit after self-cal, rms=0.080265Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.44591e-05 Jy ! Component: 100 - total flux cleaned = -0.00125433 Jy ! Component: 150 - total flux cleaned = -0.00154714 Jy ! Component: 200 - total flux cleaned = -0.00194381 Jy ! Total flux subtracted in 200 components = -0.00194381 Jy ! Clean residual min=-0.009183 max=0.010496 Jy/beam ! Clean residual mean=0.000014 rms=0.002564 Jy/beam ! Combined flux in latest and established models = 0.779252 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 208 components and 0.779253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079690Jy sigma=0.000639 ! Fit after self-cal, rms=0.079634Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079634Jy sigma=0.000639 ! Fit after self-cal, rms=0.079624Jy sigma=0.000638 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.446 mas, bmaj=11.43 mas, bpa=23.18 degrees ! Estimated noise=3454.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00201541 Jy ! Component: 100 - total flux cleaned = -0.00315408 Jy ! Component: 150 - total flux cleaned = -0.00448512 Jy ! Component: 200 - total flux cleaned = -0.00520897 Jy ! Total flux subtracted in 200 components = -0.00520897 Jy ! Clean residual min=-0.008264 max=0.009262 Jy/beam ! Clean residual mean=0.000012 rms=0.002249 Jy/beam ! Combined flux in latest and established models = 0.774044 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 227 components and 0.774043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079209Jy sigma=0.000634 ! Fit after self-cal, rms=0.079172Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00041416 Jy ! Component: 100 - total flux cleaned = -0.00100022 Jy ! Component: 150 - total flux cleaned = -0.00109015 Jy ! Component: 200 - total flux cleaned = -0.00132598 Jy ! Total flux subtracted in 200 components = -0.00132598 Jy ! Clean residual min=-0.007778 max=0.008901 Jy/beam ! Clean residual mean=0.000012 rms=0.002125 Jy/beam ! Combined flux in latest and established models = 0.772717 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 237 components and 0.772717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078975Jy sigma=0.000632 ! Fit after self-cal, rms=0.078960Jy sigma=0.000632 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078960Jy sigma=0.000632 ! Fit after self-cal, rms=0.079014Jy sigma=0.000631 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.318 mas, bmaj=12.28 mas, bpa=15.77 degrees ! Estimated noise=3833.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011783 Jy ! Component: 100 - total flux cleaned = 0.000678264 Jy ! Component: 150 - total flux cleaned = 0.000328852 Jy ! Component: 200 - total flux cleaned = -0.000118366 Jy ! Total flux subtracted in 200 components = -0.000118366 Jy ! Clean residual min=-0.007602 max=0.009712 Jy/beam ! Clean residual mean=0.000015 rms=0.002542 Jy/beam ! Combined flux in latest and established models = 0.772599 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 262 components and 0.772599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078911Jy sigma=0.000630 ! Fit after self-cal, rms=0.078892Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000265718 Jy ! Component: 100 - total flux cleaned = -0.000332496 Jy ! Component: 150 - total flux cleaned = -0.00032862 Jy ! Component: 200 - total flux cleaned = -0.000328886 Jy ! Total flux subtracted in 200 components = -0.000328886 Jy ! Clean residual min=-0.006970 max=0.009248 Jy/beam ! Clean residual mean=0.000015 rms=0.002423 Jy/beam ! Combined flux in latest and established models = 0.77227 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 275 components and 0.77227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078810Jy sigma=0.000629 ! Fit after self-cal, rms=0.078804Jy sigma=0.000629 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.454 mas, bmaj=11.43 mas, bpa=23.13 degrees ! Estimated noise=3454.89 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.454 x 11.43 at 23.13 degrees (North through East) ! Clean map min=-0.010002 max=0.44821 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.993 mas, bmaj=10.51 mas, bpa=22.98 degrees ! Estimated noise=4062.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.334002 Jy ! Component: 100 - total flux cleaned = 0.455235 Jy ! Component: 150 - total flux cleaned = 0.529242 Jy ! Component: 200 - total flux cleaned = 0.580301 Jy ! Total flux subtracted in 200 components = 0.580301 Jy ! Clean residual min=-0.028391 max=0.034570 Jy/beam ! Clean residual mean=-0.000007 rms=0.009546 Jy/beam ! Combined flux in latest and established models = 0.580301 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.580301 Jy ! Inverting map and beam ! Estimated beam: bmin=4.454 mas, bmaj=11.43 mas, bpa=23.13 degrees ! Estimated noise=3454.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0454321 Jy ! Component: 100 - total flux cleaned = 0.0793304 Jy ! Component: 150 - total flux cleaned = 0.105135 Jy ! Component: 200 - total flux cleaned = 0.124939 Jy ! Total flux subtracted in 200 components = 0.124939 Jy ! Clean residual min=-0.016126 max=0.015565 Jy/beam ! Clean residual mean=0.000013 rms=0.004853 Jy/beam ! Combined flux in latest and established models = 0.705239 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 48 components and 0.70524 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.318 mas, bmaj=12.28 mas, bpa=15.77 degrees ! Estimated noise=3833.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0223792 Jy ! Component: 100 - total flux cleaned = 0.0360111 Jy ! Component: 150 - total flux cleaned = 0.044521 Jy ! Component: 200 - total flux cleaned = 0.0497441 Jy ! Total flux subtracted in 200 components = 0.0497441 Jy ! Clean residual min=-0.011407 max=0.011288 Jy/beam ! Clean residual mean=0.000019 rms=0.003495 Jy/beam ! Combined flux in latest and established models = 0.754984 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306837 Jy ! Component: 100 - total flux cleaned = 0.0056046 Jy ! Component: 150 - total flux cleaned = 0.00775438 Jy ! Component: 200 - total flux cleaned = 0.0101194 Jy ! Total flux subtracted in 200 components = 0.0101194 Jy ! Clean residual min=-0.008548 max=0.009468 Jy/beam ! Clean residual mean=0.000017 rms=0.002741 Jy/beam ! Combined flux in latest and established models = 0.765103 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 140 components and 0.765103 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.454 mas, bmaj=11.43 mas, bpa=23.13 degrees ! Estimated noise=3454.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137575 Jy ! Component: 100 - total flux cleaned = 0.00303067 Jy ! Component: 150 - total flux cleaned = 0.00484111 Jy ! Component: 200 - total flux cleaned = 0.00626519 Jy ! Total flux subtracted in 200 components = 0.00626519 Jy ! Clean residual min=-0.007262 max=0.008862 Jy/beam ! Clean residual mean=0.000011 rms=0.002101 Jy/beam ! Combined flux in latest and established models = 0.771369 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 163 components and 0.771369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079465Jy sigma=0.000634 ! Fit after self-cal, rms=0.079438Jy sigma=0.000634 wmodel J0739+0137_S_2017_02_19_pus_map.mod ! Writing 163 model components to file: J0739+0137_S_2017_02_19_pus_map.mod wobs J0739+0137_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0739+0137_S_2017_02_19_pus_uvs.fits wwins J0739+0137_S_2017_02_19_pus_map.win ! wwins: Wrote 2 windows to J0739+0137_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296514 Jy ! Component: 100 - total flux cleaned = 0.00311226 Jy ! Component: 150 - total flux cleaned = 0.00278452 Jy ! Component: 200 - total flux cleaned = 0.00228154 Jy ! Component: 250 - total flux cleaned = 0.00151471 Jy ! Component: 300 - total flux cleaned = 0.000797997 Jy ! Component: 350 - total flux cleaned = 0.000285781 Jy ! Component: 400 - total flux cleaned = 4.16988e-05 Jy ! Component: 450 - total flux cleaned = -0.000511883 Jy ! Component: 500 - total flux cleaned = -0.000814945 Jy ! Component: 550 - total flux cleaned = -0.00103511 Jy ! Component: 600 - total flux cleaned = -0.00145505 Jy ! Component: 650 - total flux cleaned = -0.00152215 Jy ! Component: 700 - total flux cleaned = -0.00132577 Jy ! Component: 750 - total flux cleaned = -0.00113674 Jy ! Component: 800 - total flux cleaned = -0.000953129 Jy ! Component: 850 - total flux cleaned = -0.000713021 Jy ! Component: 900 - total flux cleaned = -0.000420444 Jy ! Component: 950 - total flux cleaned = -2.05949e-05 Jy ! Component: 1000 - total flux cleaned = 0.000202569 Jy ! Component: 1050 - total flux cleaned = 0.00058719 Jy ! Component: 1100 - total flux cleaned = 0.00096461 Jy ! Component: 1150 - total flux cleaned = 0.00122877 Jy ! Component: 1200 - total flux cleaned = 0.00153969 Jy ! Component: 1250 - total flux cleaned = 0.00184608 Jy ! Component: 1300 - total flux cleaned = 0.00204661 Jy ! Component: 1350 - total flux cleaned = 0.00229357 Jy ! Component: 1400 - total flux cleaned = 0.00243918 Jy ! Component: 1450 - total flux cleaned = 0.0026314 Jy ! Component: 1500 - total flux cleaned = 0.00272601 Jy ! Component: 1550 - total flux cleaned = 0.00277252 Jy ! Component: 1600 - total flux cleaned = 0.00272591 Jy ! Component: 1650 - total flux cleaned = 0.00258901 Jy ! Component: 1700 - total flux cleaned = 0.00245356 Jy ! Component: 1750 - total flux cleaned = 0.0024536 Jy ! Component: 1800 - total flux cleaned = 0.00254212 Jy ! Component: 1850 - total flux cleaned = 0.00258531 Jy ! Component: 1900 - total flux cleaned = 0.002542 Jy ! Component: 1950 - total flux cleaned = 0.002542 Jy ! Component: 2000 - total flux cleaned = 0.00254217 Jy ! Component: 2050 - total flux cleaned = 0.00258378 Jy ! Component: 2100 - total flux cleaned = 0.00258371 Jy ! Component: 2150 - total flux cleaned = 0.00262505 Jy ! Component: 2200 - total flux cleaned = 0.0027069 Jy ! Component: 2250 - total flux cleaned = 0.00278832 Jy ! Component: 2300 - total flux cleaned = 0.00278791 Jy ! Component: 2350 - total flux cleaned = 0.00270713 Jy ! Component: 2400 - total flux cleaned = 0.00270756 Jy ! Component: 2450 - total flux cleaned = 0.00266725 Jy ! Component: 2500 - total flux cleaned = 0.002667 Jy ! Component: 2550 - total flux cleaned = 0.00262717 Jy ! Component: 2600 - total flux cleaned = 0.00262697 Jy ! Component: 2650 - total flux cleaned = 0.00258754 Jy ! Component: 2700 - total flux cleaned = 0.00246955 Jy ! Component: 2750 - total flux cleaned = 0.00243023 Jy ! Component: 2800 - total flux cleaned = 0.00239076 Jy ! Component: 2850 - total flux cleaned = 0.0023907 Jy ! Component: 2900 - total flux cleaned = 0.00227239 Jy ! Component: 2950 - total flux cleaned = 0.00223282 Jy ! Component: 3000 - total flux cleaned = 0.00211426 Jy ! Component: 3050 - total flux cleaned = 0.00207464 Jy ! Component: 3100 - total flux cleaned = 0.00187617 Jy ! Component: 3150 - total flux cleaned = 0.00183609 Jy ! Component: 3200 - total flux cleaned = 0.00171589 Jy ! Component: 3250 - total flux cleaned = 0.00167558 Jy ! Component: 3300 - total flux cleaned = 0.00159545 Jy ! Component: 3350 - total flux cleaned = 0.00151485 Jy ! Component: 3400 - total flux cleaned = 0.00147416 Jy ! Component: 3450 - total flux cleaned = 0.00127092 Jy ! Component: 3500 - total flux cleaned = 0.0011896 Jy ! Component: 3550 - total flux cleaned = 0.00114832 Jy ! Component: 3600 - total flux cleaned = 0.00102464 Jy ! Component: 3650 - total flux cleaned = 0.000942012 Jy ! Component: 3700 - total flux cleaned = 0.00085865 Jy ! Component: 3750 - total flux cleaned = 0.000774838 Jy ! Component: 3800 - total flux cleaned = 0.000649181 Jy ! Component: 3850 - total flux cleaned = 0.00052271 Jy ! Component: 3900 - total flux cleaned = 0.00043791 Jy ! Component: 3950 - total flux cleaned = 0.000224825 Jy ! Component: 4000 - total flux cleaned = 0.000224396 Jy ! Component: 4050 - total flux cleaned = 5.06694e-05 Jy ! Total flux subtracted in 4096 components = -3.6535e-05 Jy ! Clean residual min=-0.002625 max=0.002691 Jy/beam ! Clean residual mean=0.000004 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.771332 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 423 components and 0.771332 Jy ![Exited script file: muppet] wmap "J0739+0137_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.454 x 11.43 at 23.13 degrees (North through East) ! Clean map min=-0.0060653 max=0.45302 Jy/beam ! Writing clean map to FITS file: J0739+0137_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.453025 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000814449 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.539341 0.539341 1.07868 2.15736 4.31473 8.62945 17.2589 34.5178 69.0356 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.453 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.454 x 11.43 at 23.13 degrees (North through East) ! Clean map min=-0.0060653 max=0.45302 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0739+0137_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:46:09 2019