! Started logfile: J0738-3322_S_2017_02_24_pus_uvs.log on Sat May 4 11:21:48 2019 obs J0738-3322_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J0738-3322_S_2017_02_24_pus_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.79863 visibilities/baseline/integration-bin. ! Found source: J0738-3322 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 20988 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0738-3322_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 159 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 597 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.720202Jy sigma=0.004019 ! Fit after self-cal, rms=0.681524Jy sigma=0.003800 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.674 mas, bmaj=8.429 mas, bpa=-2.626 degrees ! Estimated noise=1469.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.274139 Jy ! Component: 100 - total flux cleaned = 0.376643 Jy ! Total flux subtracted in 100 components = 0.376643 Jy ! Clean residual min=-0.049095 max=0.202873 Jy/beam ! Clean residual mean=-0.000849 rms=0.017467 Jy/beam ! Combined flux in latest and established models = 0.376643 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.376643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321855Jy sigma=0.001945 ! Fit after self-cal, rms=0.321893Jy sigma=0.001935 ! Inverting map ! Added new window around map position (10, -1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.160744 Jy ! Component: 100 - total flux cleaned = 0.231682 Jy ! Total flux subtracted in 100 components = 0.231682 Jy ! Clean residual min=-0.029499 max=0.062217 Jy/beam ! Clean residual mean=-0.000482 rms=0.009496 Jy/beam ! Combined flux in latest and established models = 0.608325 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 0.608325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220563Jy sigma=0.001261 ! Fit after self-cal, rms=0.209418Jy sigma=0.001201 ! Inverting map ! Added new window around map position (5.5, 3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0649676 Jy ! Component: 100 - total flux cleaned = 0.10862 Jy ! Total flux subtracted in 100 components = 0.10862 Jy ! Clean residual min=-0.021665 max=0.044861 Jy/beam ! Clean residual mean=-0.000306 rms=0.006384 Jy/beam ! Combined flux in latest and established models = 0.716945 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 45 components and 0.716945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176345Jy sigma=0.000954 ! Fit after self-cal, rms=0.173933Jy sigma=0.000940 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=9.998 mas, bpa=-1.178 degrees ! Estimated noise=927.827 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0593613 Jy ! Component: 100 - total flux cleaned = 0.0956036 Jy ! Component: 150 - total flux cleaned = 0.11966 Jy ! Component: 200 - total flux cleaned = 0.136003 Jy ! Total flux subtracted in 200 components = 0.136003 Jy ! Clean residual min=-0.015792 max=0.032372 Jy/beam ! Clean residual mean=-0.000184 rms=0.004675 Jy/beam ! Combined flux in latest and established models = 0.852948 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 102 components and 0.852948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153415Jy sigma=0.000773 ! Fit after self-cal, rms=0.152085Jy sigma=0.000763 ! Inverting map ! Added new window around map position (-7.5, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0245376 Jy ! Component: 100 - total flux cleaned = 0.0339292 Jy ! Component: 150 - total flux cleaned = 0.0387954 Jy ! Component: 200 - total flux cleaned = 0.0417091 Jy ! Total flux subtracted in 200 components = 0.0417091 Jy ! Clean residual min=-0.011859 max=0.017101 Jy/beam ! Clean residual mean=-0.000129 rms=0.003444 Jy/beam ! Combined flux in latest and established models = 0.894657 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 134 components and 0.894657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146558Jy sigma=0.000733 ! Fit after self-cal, rms=0.146335Jy sigma=0.000732 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.03 HN 1.16 KP 0.98 ! LA 0.96 MK 1.01 NL 0.91 OV 1.04 ! PT 1.03 SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 1.21 KP 0.94 ! LA 0.93 MK 1.00 NL 0.89 OV 1.08 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.13 KP 1.03 ! LA 1.01 MK 1.02 NL 1.01 OV 0.98 ! PT 0.99 SC 0.95 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 1.05 KP 1.00* ! LA 0.91 MK 0.95 NL 1.00* OV 1.01 ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.146335Jy sigma=0.000732 ! Fit after self-cal, rms=0.143135Jy sigma=0.000700 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=9.879 mas, bpa=-0.5022 degrees ! Estimated noise=918.929 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00702054 Jy ! Component: 100 - total flux cleaned = 0.00664545 Jy ! Component: 150 - total flux cleaned = 0.00592044 Jy ! Component: 200 - total flux cleaned = 0.00461948 Jy ! Total flux subtracted in 200 components = 0.00461948 Jy ! Clean residual min=-0.008644 max=0.007767 Jy/beam ! Clean residual mean=0.000031 rms=0.002070 Jy/beam ! Combined flux in latest and established models = 0.899276 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 159 components and 0.899276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140617Jy sigma=0.000687 ! Fit after self-cal, rms=0.140570Jy sigma=0.000687 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140570Jy sigma=0.000687 ! Fit after self-cal, rms=0.150672Jy sigma=0.000677 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=9.923 mas, bpa=-0.6036 degrees ! Estimated noise=923.346 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000629514 Jy ! Component: 100 - total flux cleaned = -0.000609838 Jy ! Component: 150 - total flux cleaned = -0.00148226 Jy ! Component: 200 - total flux cleaned = -0.00239397 Jy ! Total flux subtracted in 200 components = -0.00239397 Jy ! Clean residual min=-0.005550 max=0.004746 Jy/beam ! Clean residual mean=-0.000007 rms=0.001373 Jy/beam ! Combined flux in latest and established models = 0.896882 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 191 components and 0.896882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150159Jy sigma=0.000673 ! Fit after self-cal, rms=0.150162Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000549998 Jy ! Component: 100 - total flux cleaned = -0.00127607 Jy ! Component: 150 - total flux cleaned = -0.00192876 Jy ! Component: 200 - total flux cleaned = -0.00233173 Jy ! Total flux subtracted in 200 components = -0.00233173 Jy ! Clean residual min=-0.005148 max=0.004641 Jy/beam ! Clean residual mean=-0.000010 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 0.89455 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 214 components and 0.89455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150000Jy sigma=0.000671 ! Fit after self-cal, rms=0.149983Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149983Jy sigma=0.000671 ! Fit after self-cal, rms=0.153034Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=9.917 mas, bpa=-0.4998 degrees ! Estimated noise=923.034 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00155965 Jy ! Component: 100 - total flux cleaned = -0.00210296 Jy ! Component: 150 - total flux cleaned = -0.00248643 Jy ! Component: 200 - total flux cleaned = -0.00282792 Jy ! Total flux subtracted in 200 components = -0.00282792 Jy ! Clean residual min=-0.004739 max=0.004400 Jy/beam ! Clean residual mean=-0.000007 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 0.891722 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 232 components and 0.891722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152886Jy sigma=0.000670 ! Fit after self-cal, rms=0.152884Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000163719 Jy ! Component: 100 - total flux cleaned = -0.000392362 Jy ! Component: 150 - total flux cleaned = -0.000609337 Jy ! Component: 200 - total flux cleaned = -0.000817731 Jy ! Total flux subtracted in 200 components = -0.000817731 Jy ! Clean residual min=-0.004537 max=0.004269 Jy/beam ! Clean residual mean=-0.000009 rms=0.001163 Jy/beam ! Combined flux in latest and established models = 0.890905 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 243 components and 0.890904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152809Jy sigma=0.000670 ! Fit after self-cal, rms=0.152801Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152801Jy sigma=0.000670 ! Fit after self-cal, rms=0.154316Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.075 mas, bmaj=22.62 mas, bpa=0.3676 degrees ! Estimated noise=1102.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00216059 Jy ! Component: 100 - total flux cleaned = -0.00280774 Jy ! Component: 150 - total flux cleaned = -0.00328404 Jy ! Component: 200 - total flux cleaned = -0.0035162 Jy ! Total flux subtracted in 200 components = -0.0035162 Jy ! Clean residual min=-0.004311 max=0.004419 Jy/beam ! Clean residual mean=-0.000014 rms=0.001288 Jy/beam ! Combined flux in latest and established models = 0.887388 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 259 components and 0.887388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154272Jy sigma=0.000669 ! Fit after self-cal, rms=0.154268Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000410078 Jy ! Component: 100 - total flux cleaned = -0.000550986 Jy ! Component: 150 - total flux cleaned = -0.000629378 Jy ! Component: 200 - total flux cleaned = -0.00073742 Jy ! Total flux subtracted in 200 components = -0.00073742 Jy ! Clean residual min=-0.004222 max=0.004345 Jy/beam ! Clean residual mean=-0.000016 rms=0.001260 Jy/beam ! Combined flux in latest and established models = 0.886651 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 272 components and 0.886651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154247Jy sigma=0.000669 ! Fit after self-cal, rms=0.154241Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=9.914 mas, bpa=-0.427 degrees ! Estimated noise=922.139 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.324 x 9.914 at -0.427 degrees (North through East) ! Clean map min=-0.0069524 max=0.34394 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.69 mas, bmaj=8.329 mas, bpa=-1.732 degrees ! Estimated noise=1464.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.30677 Jy ! Component: 100 - total flux cleaned = 0.458779 Jy ! Component: 150 - total flux cleaned = 0.554047 Jy ! Component: 200 - total flux cleaned = 0.622855 Jy ! Total flux subtracted in 200 components = 0.622855 Jy ! Clean residual min=-0.017718 max=0.039404 Jy/beam ! Clean residual mean=-0.000393 rms=0.006653 Jy/beam ! Combined flux in latest and established models = 0.622855 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.622855 Jy ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=9.914 mas, bpa=-0.427 degrees ! Estimated noise=922.139 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0858119 Jy ! Component: 100 - total flux cleaned = 0.139997 Jy ! Component: 150 - total flux cleaned = 0.176482 Jy ! Component: 200 - total flux cleaned = 0.202548 Jy ! Total flux subtracted in 200 components = 0.202548 Jy ! Clean residual min=-0.009590 max=0.019026 Jy/beam ! Clean residual mean=-0.000093 rms=0.003095 Jy/beam ! Combined flux in latest and established models = 0.825404 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 112 components and 0.825404 Jy ! Inverting map ! Added new window around map position (-3.5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201241 Jy ! Component: 100 - total flux cleaned = 0.0340832 Jy ! Component: 150 - total flux cleaned = 0.0442861 Jy ! Component: 200 - total flux cleaned = 0.0516149 Jy ! Total flux subtracted in 200 components = 0.0516149 Jy ! Clean residual min=-0.005231 max=0.005959 Jy/beam ! Clean residual mean=-0.000021 rms=0.001469 Jy/beam ! Combined flux in latest and established models = 0.877018 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 158 components and 0.877018 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.075 mas, bmaj=22.62 mas, bpa=0.3676 degrees ! Estimated noise=1102.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00754135 Jy ! Component: 100 - total flux cleaned = 0.00876735 Jy ! Component: 150 - total flux cleaned = 0.00876286 Jy ! Component: 200 - total flux cleaned = 0.00890138 Jy ! Total flux subtracted in 200 components = 0.00890138 Jy ! Clean residual min=-0.004746 max=0.004640 Jy/beam ! Clean residual mean=-0.000020 rms=0.001394 Jy/beam ! Combined flux in latest and established models = 0.88592 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.94408e-06 Jy ! Component: 100 - total flux cleaned = 2.80525e-06 Jy ! Component: 150 - total flux cleaned = -0.000191813 Jy ! Component: 200 - total flux cleaned = -0.000375916 Jy ! Total flux subtracted in 200 components = -0.000375916 Jy ! Clean residual min=-0.004343 max=0.004171 Jy/beam ! Clean residual mean=-0.000025 rms=0.001284 Jy/beam ! Combined flux in latest and established models = 0.885544 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 216 components and 0.885544 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=9.914 mas, bpa=-0.427 degrees ! Estimated noise=922.139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.01808e-05 Jy ! Component: 100 - total flux cleaned = -0.000521166 Jy ! Component: 150 - total flux cleaned = -0.000628335 Jy ! Component: 200 - total flux cleaned = -0.000730397 Jy ! Total flux subtracted in 200 components = -0.000730397 Jy ! Clean residual min=-0.004022 max=0.003985 Jy/beam ! Clean residual mean=-0.000016 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.884814 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 238 components and 0.884814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154270Jy sigma=0.000669 ! Fit after self-cal, rms=0.154153Jy sigma=0.000669 wmodel J0738-3322_S_2017_02_24_pus_map.mod ! Writing 238 model components to file: J0738-3322_S_2017_02_24_pus_map.mod wobs J0738-3322_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J0738-3322_S_2017_02_24_pus_uvs.fits wwins J0738-3322_S_2017_02_24_pus_map.win ! wwins: Wrote 7 windows to J0738-3322_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000325919 Jy ! Component: 100 - total flux cleaned = 0.000395293 Jy ! Component: 150 - total flux cleaned = 0.000331352 Jy ! Component: 200 - total flux cleaned = 0.000330877 Jy ! Component: 250 - total flux cleaned = 9.35445e-05 Jy ! Component: 300 - total flux cleaned = 9.29896e-05 Jy ! Component: 350 - total flux cleaned = 9.39957e-05 Jy ! Component: 400 - total flux cleaned = 0.000201781 Jy ! Component: 450 - total flux cleaned = 0.000200695 Jy ! Component: 500 - total flux cleaned = 0.000199055 Jy ! Component: 550 - total flux cleaned = 0.000147994 Jy ! Component: 600 - total flux cleaned = 0.0001476 Jy ! Component: 650 - total flux cleaned = 0.000147419 Jy ! Component: 700 - total flux cleaned = 0.000193802 Jy ! Component: 750 - total flux cleaned = 0.00023953 Jy ! Component: 800 - total flux cleaned = 0.000418925 Jy ! Component: 850 - total flux cleaned = 0.000681901 Jy ! Component: 900 - total flux cleaned = 0.000896562 Jy ! Component: 950 - total flux cleaned = 0.00110745 Jy ! Component: 1000 - total flux cleaned = 0.00131449 Jy ! Component: 1050 - total flux cleaned = 0.00151754 Jy ! Component: 1100 - total flux cleaned = 0.00171742 Jy ! Component: 1150 - total flux cleaned = 0.00175726 Jy ! Component: 1200 - total flux cleaned = 0.00199122 Jy ! Component: 1250 - total flux cleaned = 0.00214418 Jy ! Component: 1300 - total flux cleaned = 0.00225672 Jy ! Component: 1350 - total flux cleaned = 0.00233064 Jy ! Component: 1400 - total flux cleaned = 0.00236701 Jy ! Component: 1450 - total flux cleaned = 0.00233158 Jy ! Component: 1500 - total flux cleaned = 0.00258 Jy ! Component: 1550 - total flux cleaned = 0.00254514 Jy ! Component: 1600 - total flux cleaned = 0.0026487 Jy ! Component: 1650 - total flux cleaned = 0.00268285 Jy ! Component: 1700 - total flux cleaned = 0.00281754 Jy ! Component: 1750 - total flux cleaned = 0.00298325 Jy ! Component: 1800 - total flux cleaned = 0.00288476 Jy ! Component: 1850 - total flux cleaned = 0.0029172 Jy ! Component: 1900 - total flux cleaned = 0.00298101 Jy ! Component: 1950 - total flux cleaned = 0.00298092 Jy ! Component: 2000 - total flux cleaned = 0.00304273 Jy ! Component: 2050 - total flux cleaned = 0.00298107 Jy ! Component: 2100 - total flux cleaned = 0.00313385 Jy ! Component: 2150 - total flux cleaned = 0.00304331 Jy ! Component: 2200 - total flux cleaned = 0.00313315 Jy ! Component: 2250 - total flux cleaned = 0.00316252 Jy ! Component: 2300 - total flux cleaned = 0.00319147 Jy ! Component: 2350 - total flux cleaned = 0.00321988 Jy ! Component: 2400 - total flux cleaned = 0.00327714 Jy ! Component: 2450 - total flux cleaned = 0.00336151 Jy ! Component: 2500 - total flux cleaned = 0.00344473 Jy ! Component: 2550 - total flux cleaned = 0.00349949 Jy ! Component: 2600 - total flux cleaned = 0.00352679 Jy ! Component: 2650 - total flux cleaned = 0.0036082 Jy ! Component: 2700 - total flux cleaned = 0.0036082 Jy ! Component: 2750 - total flux cleaned = 0.00366134 Jy ! Component: 2800 - total flux cleaned = 0.00363514 Jy ! Component: 2850 - total flux cleaned = 0.00376574 Jy ! Component: 2900 - total flux cleaned = 0.00381758 Jy ! Component: 2950 - total flux cleaned = 0.00386896 Jy ! Component: 3000 - total flux cleaned = 0.0038944 Jy ! Component: 3050 - total flux cleaned = 0.00397018 Jy ! Component: 3100 - total flux cleaned = 0.00401997 Jy ! Component: 3150 - total flux cleaned = 0.00411936 Jy ! Component: 3200 - total flux cleaned = 0.00414384 Jy ! Component: 3250 - total flux cleaned = 0.00416838 Jy ! Component: 3300 - total flux cleaned = 0.00426512 Jy ! Component: 3350 - total flux cleaned = 0.00426484 Jy ! Component: 3400 - total flux cleaned = 0.00426475 Jy ! Component: 3450 - total flux cleaned = 0.00438319 Jy ! Component: 3500 - total flux cleaned = 0.00426542 Jy ! Component: 3550 - total flux cleaned = 0.00433577 Jy ! Component: 3600 - total flux cleaned = 0.004452 Jy ! Component: 3650 - total flux cleaned = 0.00440568 Jy ! Component: 3700 - total flux cleaned = 0.00442878 Jy ! Component: 3750 - total flux cleaned = 0.00447435 Jy ! Component: 3800 - total flux cleaned = 0.00451984 Jy ! Component: 3850 - total flux cleaned = 0.00454227 Jy ! Component: 3900 - total flux cleaned = 0.00460936 Jy ! Component: 3950 - total flux cleaned = 0.0046095 Jy ! Component: 4000 - total flux cleaned = 0.00469801 Jy ! Component: 4050 - total flux cleaned = 0.00474187 Jy ! Total flux subtracted in 4096 components = 0.00480762 Jy ! Clean residual min=-0.001313 max=0.001186 Jy/beam ! Clean residual mean=-0.000006 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.889621 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 542 components and 0.889621 Jy ![Exited script file: muppet] wmap "J0738-3322_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.324 x 9.914 at -0.427 degrees (North through East) ! Clean map min=-0.0048134 max=0.36345 Jy/beam ! Writing clean map to FITS file: J0738-3322_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.363449 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000388952 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.32105 0.32105 0.642101 1.2842 2.5684 5.13681 10.2736 20.5472 41.0944 82.1889 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.363 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.324 x 9.914 at -0.427 degrees (North through East) ! Clean map min=-0.0048134 max=0.36345 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0738-3322_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:21:54 2019