! Started logfile: J0737-3954_S_2017_09_26_pus_uvs.log on Sat May 11 12:57:28 2019 obs J0737-3954_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0737-3954_S_2017_09_26_pus_uva.fits ! AN table 1: 271 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.132329 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0737-3954 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 5164 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0737-3954_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1726 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1768 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1793 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2259 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.886224Jy sigma=0.005252 ! Fit after self-cal, rms=0.858316Jy sigma=0.005111 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.343 mas, bmaj=45.13 mas, bpa=-8.08 degrees ! Estimated noise=8547.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112825 Jy ! Component: 100 - total flux cleaned = 0.129062 Jy ! Total flux subtracted in 100 components = 0.129062 Jy ! Clean residual min=-0.014190 max=0.014218 Jy/beam ! Clean residual mean=0.000082 rms=0.005460 Jy/beam ! Combined flux in latest and established models = 0.129062 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.129062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107121Jy sigma=0.000616 ! Fit after self-cal, rms=0.106934Jy sigma=0.000615 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.541 mas, bmaj=69.59 mas, bpa=-10.69 degrees ! Estimated noise=2133.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128286 Jy ! Component: 100 - total flux cleaned = 0.0168609 Jy ! Component: 150 - total flux cleaned = 0.0179783 Jy ! Component: 200 - total flux cleaned = 0.0179833 Jy ! Total flux subtracted in 200 components = 0.0179833 Jy ! Clean residual min=-0.002807 max=0.002789 Jy/beam ! Clean residual mean=-0.000027 rms=0.001262 Jy/beam ! Combined flux in latest and established models = 0.147045 Jy ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 87 components and 0.147045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104906Jy sigma=0.000605 ! Fit after self-cal, rms=0.104819Jy sigma=0.000604 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.02 ! LA 1.00 MK 1.48 NL 1.00* OV 1.09 ! PT 0.99 ! ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.97 ! LA 1.00 MK 0.80 NL 1.00* OV 1.08 ! PT 0.99 ! ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.96 ! LA 0.97 MK 1.06 NL 1.00* OV 0.94 ! PT 1.02 ! ! ! Correcting IF 4. ! A total of 180 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.104819Jy sigma=0.000604 ! Fit after self-cal, rms=0.101829Jy sigma=0.000595 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=11.4 mas, bmaj=77.5 mas, bpa=-12.39 degrees ! Estimated noise=2244.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244485 Jy ! Component: 100 - total flux cleaned = 0.00330881 Jy ! Component: 150 - total flux cleaned = 0.00372326 Jy ! Component: 200 - total flux cleaned = 0.00384678 Jy ! Total flux subtracted in 200 components = 0.00384678 Jy ! Clean residual min=-0.001006 max=0.001006 Jy/beam ! Clean residual mean=0.000019 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.150892 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 155 components and 0.150892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101680Jy sigma=0.000594 ! Fit after self-cal, rms=0.101708Jy sigma=0.000594 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101708Jy sigma=0.000594 ! Fit after self-cal, rms=0.102978Jy sigma=0.000592 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.52 mas, bmaj=78.63 mas, bpa=-12.47 degrees ! Estimated noise=2236.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000849569 Jy ! Component: 100 - total flux cleaned = 0.00113632 Jy ! Component: 150 - total flux cleaned = 0.00132496 Jy ! Component: 200 - total flux cleaned = 0.00141717 Jy ! Total flux subtracted in 200 components = 0.00141717 Jy ! Clean residual min=-0.000773 max=0.000763 Jy/beam ! Clean residual mean=-0.000008 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.152309 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 189 components and 0.152309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102936Jy sigma=0.000592 ! Fit after self-cal, rms=0.103081Jy sigma=0.000591 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000482098 Jy ! Component: 100 - total flux cleaned = -0.000483459 Jy ! Component: 150 - total flux cleaned = -0.000396812 Jy ! Component: 200 - total flux cleaned = -0.000313964 Jy ! Total flux subtracted in 200 components = -0.000313964 Jy ! Clean residual min=-0.000688 max=0.000686 Jy/beam ! Clean residual mean=-0.000004 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.151995 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 207 components and 0.151995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103046Jy sigma=0.000591 ! Fit after self-cal, rms=0.103044Jy sigma=0.000591 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103044Jy sigma=0.000591 ! Fit after self-cal, rms=0.103610Jy sigma=0.000591 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.56 mas, bmaj=78.75 mas, bpa=-12.51 degrees ! Estimated noise=2233.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017693 Jy ! Component: 100 - total flux cleaned = 0.000434538 Jy ! Component: 150 - total flux cleaned = 0.00059824 Jy ! Component: 200 - total flux cleaned = 0.000797142 Jy ! Total flux subtracted in 200 components = 0.000797142 Jy ! Clean residual min=-0.000653 max=0.000653 Jy/beam ! Clean residual mean=-0.000003 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.152793 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 221 components and 0.152793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103579Jy sigma=0.000591 ! Fit after self-cal, rms=0.103609Jy sigma=0.000591 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.98293e-05 Jy ! Component: 100 - total flux cleaned = 7.89867e-05 Jy ! Component: 150 - total flux cleaned = 0.000196241 Jy ! Component: 200 - total flux cleaned = 0.000505718 Jy ! Total flux subtracted in 200 components = 0.000505718 Jy ! Clean residual min=-0.000645 max=0.000643 Jy/beam ! Clean residual mean=-0.000002 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.153298 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 241 components and 0.153298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103580Jy sigma=0.000591 ! Fit after self-cal, rms=0.103580Jy sigma=0.000591 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103580Jy sigma=0.000591 ! Fit after self-cal, rms=0.103758Jy sigma=0.000591 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=16.39 mas, bmaj=96.52 mas, bpa=-17.11 degrees ! Estimated noise=2246.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00021011 Jy ! Component: 100 - total flux cleaned = 0.000101422 Jy ! Component: 150 - total flux cleaned = 0.00012213 Jy ! Component: 200 - total flux cleaned = 0.000142581 Jy ! Total flux subtracted in 200 components = 0.000142581 Jy ! Clean residual min=-0.000325 max=0.000330 Jy/beam ! Clean residual mean=-0.000006 rms=0.000129 Jy/beam ! Combined flux in latest and established models = 0.153441 Jy selfcal ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 296 components and 0.153441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103747Jy sigma=0.000591 ! Fit after self-cal, rms=0.103760Jy sigma=0.000591 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.05385e-05 Jy ! Component: 100 - total flux cleaned = -0.000165732 Jy ! Component: 150 - total flux cleaned = -0.000112299 Jy ! Component: 200 - total flux cleaned = -9.51411e-05 Jy ! Total flux subtracted in 200 components = -9.51411e-05 Jy ! Clean residual min=-0.000285 max=0.000283 Jy/beam ! Clean residual mean=-0.000005 rms=0.000117 Jy/beam ! Combined flux in latest and established models = 0.153346 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 335 components and 0.153346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103751Jy sigma=0.000591 ! Fit after self-cal, rms=0.103751Jy sigma=0.000591 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=11.57 mas, bmaj=78.78 mas, bpa=-12.52 degrees ! Estimated noise=2230.89 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 11.57 x 78.78 at -12.52 degrees (North through East) ! Clean map min=-0.0062283 max=0.13325 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.654 mas, bmaj=44.83 mas, bpa=-8.11 degrees ! Estimated noise=10678.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105044 Jy ! Component: 100 - total flux cleaned = 0.121178 Jy ! Component: 150 - total flux cleaned = 0.129461 Jy ! Component: 200 - total flux cleaned = 0.129368 Jy ! Total flux subtracted in 200 components = 0.129368 Jy ! Clean residual min=-0.008585 max=0.008558 Jy/beam ! Clean residual mean=0.000001 rms=0.003504 Jy/beam ! Combined flux in latest and established models = 0.129368 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 57 model components to the UV plane model. ! The established model now contains 57 components and 0.129368 Jy ! Inverting map and beam ! Estimated beam: bmin=11.57 mas, bmaj=78.78 mas, bpa=-12.52 degrees ! Estimated noise=2230.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131196 Jy ! Component: 100 - total flux cleaned = 0.0183707 Jy ! Component: 150 - total flux cleaned = 0.0215796 Jy ! Component: 200 - total flux cleaned = 0.0217864 Jy ! Total flux subtracted in 200 components = 0.0217864 Jy ! Clean residual min=-0.002162 max=0.002148 Jy/beam ! Clean residual mean=-0.000064 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.151155 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 134 components and 0.151155 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=16.39 mas, bmaj=96.52 mas, bpa=-17.11 degrees ! Estimated noise=2246.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000564019 Jy ! Component: 100 - total flux cleaned = 0.00128743 Jy ! Component: 150 - total flux cleaned = 0.00202283 Jy ! Component: 200 - total flux cleaned = 0.00227314 Jy ! Total flux subtracted in 200 components = 0.00227314 Jy ! Clean residual min=-0.001022 max=0.001023 Jy/beam ! Clean residual mean=-0.000007 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.153428 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000573482 Jy ! Component: 100 - total flux cleaned = -0.00105514 Jy ! Component: 150 - total flux cleaned = -0.000895895 Jy ! Component: 200 - total flux cleaned = -0.000725196 Jy ! Total flux subtracted in 200 components = -0.000725196 Jy ! Clean residual min=-0.001426 max=0.001428 Jy/beam ! Clean residual mean=0.000009 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.152702 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 208 components and 0.152702 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=11.57 mas, bmaj=78.78 mas, bpa=-12.52 degrees ! Estimated noise=2230.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108223 Jy ! Component: 100 - total flux cleaned = -0.00212953 Jy ! Component: 150 - total flux cleaned = -0.00277688 Jy ! Component: 200 - total flux cleaned = -0.00311399 Jy ! Total flux subtracted in 200 components = -0.00311399 Jy ! Clean residual min=-0.000687 max=0.000683 Jy/beam ! Clean residual mean=-0.000000 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.149588 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 243 components and 0.149588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103685Jy sigma=0.000590 ! Fit after self-cal, rms=0.103657Jy sigma=0.000590 wmodel J0737-3954_S_2017_09_26_pus_map.mod ! Writing 243 model components to file: J0737-3954_S_2017_09_26_pus_map.mod wobs J0737-3954_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0737-3954_S_2017_09_26_pus_uvs.fits wwins J0737-3954_S_2017_09_26_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0737-3954_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 11.57 x 78.78 at -12.52 degrees (North through East) ! Clean map min=-0.0067652 max=0.11873 Jy/beam ! Writing clean map to FITS file: J0737-3954_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.118728 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000246115 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.621878 0.621878 1.24376 2.48751 4.97503 9.95005 19.9001 39.8002 79.6004 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.118 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 11.57 x 78.78 at -12.52 degrees (North through East) ! Clean map min=-0.0067652 max=0.11873 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0737-3954_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:57:35 2019