! Started logfile: J0736-1853_S_2017_10_21_pus_uvs.log on Sat May 11 20:53:21 2019 obs J0736-1853_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0736-1853_S_2017_10_21_pus_uva.fits ! AN table 1: 117 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.940646 visibilities/baseline/integration-bin. ! Found source: J0736-1853 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 15848 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0736-1853_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 136 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 723 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.948998Jy sigma=0.007847 ! Fit after self-cal, rms=0.904673Jy sigma=0.007477 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.288 mas, bmaj=16.38 mas, bpa=-25.89 degrees ! Estimated noise=2361.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0729695 Jy ! Component: 100 - total flux cleaned = 0.111429 Jy ! Total flux subtracted in 100 components = 0.111429 Jy ! Clean residual min=-0.015025 max=0.022598 Jy/beam ! Clean residual mean=-0.000194 rms=0.006545 Jy/beam ! Combined flux in latest and established models = 0.111429 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.111429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114571Jy sigma=0.000926 ! Fit after self-cal, rms=0.114154Jy sigma=0.000922 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.303 mas, bmaj=20.68 mas, bpa=-21.59 degrees ! Estimated noise=898.769 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0403908 Jy ! Component: 100 - total flux cleaned = 0.0649528 Jy ! Component: 150 - total flux cleaned = 0.0819763 Jy ! Component: 200 - total flux cleaned = 0.0940414 Jy ! Total flux subtracted in 200 components = 0.0940414 Jy ! Clean residual min=-0.009932 max=0.015105 Jy/beam ! Clean residual mean=0.000023 rms=0.004616 Jy/beam ! Combined flux in latest and established models = 0.20547 Jy ! Performing phase self-cal ! Adding 110 model components to the UV plane model. ! The established model now contains 148 components and 0.20547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098195Jy sigma=0.000766 ! Fit after self-cal, rms=0.098048Jy sigma=0.000764 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.38 FD 0.94 HN 0.99 KP 1.07 ! LA 0.92 MK 1.00* NL 1.13 OV 1.21 ! PT 0.85 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.09 KP 1.06 ! LA 0.90 MK 1.00* NL 1.17 OV 1.18 ! PT 0.81 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.92 KP 1.02 ! LA 0.70 MK 1.21 NL 1.28 OV 1.11 ! PT 0.81 ! ! ! Correcting IF 4. ! A total of 210 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.18 HN 0.67 KP 1.00* ! LA 1.00* MK 0.96 NL 1.00* OV 1.00* ! PT 0.73 ! ! ! Fit before self-cal, rms=0.098048Jy sigma=0.000764 ! Fit after self-cal, rms=0.102996Jy sigma=0.000733 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.426 mas, bmaj=22.13 mas, bpa=-20.62 degrees ! Estimated noise=916.306 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122487 Jy ! Component: 100 - total flux cleaned = 0.00172768 Jy ! Component: 150 - total flux cleaned = 0.00207837 Jy ! Component: 200 - total flux cleaned = 0.00227813 Jy ! Total flux subtracted in 200 components = 0.00227813 Jy ! Clean residual min=-0.006140 max=0.011616 Jy/beam ! Clean residual mean=0.000027 rms=0.003123 Jy/beam ! Combined flux in latest and established models = 0.207748 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 168 components and 0.207748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102904Jy sigma=0.000732 ! Fit after self-cal, rms=0.103373Jy sigma=0.000731 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103373Jy sigma=0.000731 ! Fit after self-cal, rms=0.101918Jy sigma=0.000730 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.387 mas, bmaj=22.11 mas, bpa=-20.47 degrees ! Estimated noise=898.251 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000980623 Jy ! Component: 100 - total flux cleaned = 0.0015378 Jy ! Component: 150 - total flux cleaned = 0.00199879 Jy ! Component: 200 - total flux cleaned = 0.00229926 Jy ! Total flux subtracted in 200 components = 0.00229926 Jy ! Clean residual min=-0.006255 max=0.011319 Jy/beam ! Clean residual mean=0.000023 rms=0.002996 Jy/beam ! Combined flux in latest and established models = 0.210047 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 175 components and 0.210047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101824Jy sigma=0.000730 ! Fit after self-cal, rms=0.101927Jy sigma=0.000729 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000611352 Jy ! Component: 100 - total flux cleaned = 0.000766209 Jy ! Component: 150 - total flux cleaned = 0.000813281 Jy ! Component: 200 - total flux cleaned = 0.00081293 Jy ! Total flux subtracted in 200 components = 0.00081293 Jy ! Clean residual min=-0.006158 max=0.011172 Jy/beam ! Clean residual mean=0.000023 rms=0.002957 Jy/beam ! Combined flux in latest and established models = 0.21086 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 179 components and 0.21086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101867Jy sigma=0.000729 ! Fit after self-cal, rms=0.101877Jy sigma=0.000729 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101877Jy sigma=0.000729 ! Fit after self-cal, rms=0.099918Jy sigma=0.000729 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.355 mas, bmaj=22.02 mas, bpa=-20.39 degrees ! Estimated noise=875.116 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000759545 Jy ! Component: 100 - total flux cleaned = 0.00124179 Jy ! Component: 150 - total flux cleaned = 0.00163798 Jy ! Component: 200 - total flux cleaned = 0.00181473 Jy ! Total flux subtracted in 200 components = 0.00181473 Jy ! Clean residual min=-0.005981 max=0.010645 Jy/beam ! Clean residual mean=0.000021 rms=0.002842 Jy/beam ! Combined flux in latest and established models = 0.212675 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 181 components and 0.212675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099841Jy sigma=0.000728 ! Fit after self-cal, rms=0.099896Jy sigma=0.000728 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000508341 Jy ! Component: 100 - total flux cleaned = 0.000604287 Jy ! Component: 150 - total flux cleaned = 0.000645833 Jy ! Component: 200 - total flux cleaned = 0.000646926 Jy ! Total flux subtracted in 200 components = 0.000646926 Jy ! Clean residual min=-0.005874 max=0.010555 Jy/beam ! Clean residual mean=0.000020 rms=0.002802 Jy/beam ! Combined flux in latest and established models = 0.213322 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 183 components and 0.213322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099840Jy sigma=0.000728 ! Fit after self-cal, rms=0.099844Jy sigma=0.000728 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099844Jy sigma=0.000728 ! Fit after self-cal, rms=0.099769Jy sigma=0.000728 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.846 mas, bmaj=31 mas, bpa=-16.89 degrees ! Estimated noise=970.844 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195073 Jy ! Component: 100 - total flux cleaned = 0.00215967 Jy ! Component: 150 - total flux cleaned = 0.00228667 Jy ! Component: 200 - total flux cleaned = 0.00240162 Jy ! Total flux subtracted in 200 components = 0.00240162 Jy ! Clean residual min=-0.007958 max=0.013961 Jy/beam ! Clean residual mean=0.000031 rms=0.003925 Jy/beam ! Combined flux in latest and established models = 0.215724 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 206 components and 0.215724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099708Jy sigma=0.000727 ! Fit after self-cal, rms=0.099727Jy sigma=0.000727 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000407242 Jy ! Component: 100 - total flux cleaned = 0.000473558 Jy ! Component: 150 - total flux cleaned = 0.000592233 Jy ! Component: 200 - total flux cleaned = 0.000706391 Jy ! Total flux subtracted in 200 components = 0.000706391 Jy ! Clean residual min=-0.007977 max=0.013709 Jy/beam ! Clean residual mean=0.000029 rms=0.003833 Jy/beam ! Combined flux in latest and established models = 0.21643 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 206 components and 0.21643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099671Jy sigma=0.000727 ! Fit after self-cal, rms=0.099654Jy sigma=0.000727 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.318 mas, bmaj=21.89 mas, bpa=-20.37 degrees ! Estimated noise=856.049 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.318 x 21.89 at -20.37 degrees (North through East) ! Clean map min=-0.005662 max=0.070433 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=16.46 mas, bpa=-24.86 degrees ! Estimated noise=2261.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0688859 Jy ! Component: 100 - total flux cleaned = 0.108403 Jy ! Component: 150 - total flux cleaned = 0.135536 Jy ! Component: 200 - total flux cleaned = 0.154651 Jy ! Total flux subtracted in 200 components = 0.154651 Jy ! Clean residual min=-0.010929 max=0.011595 Jy/beam ! Clean residual mean=-0.000098 rms=0.003866 Jy/beam ! Combined flux in latest and established models = 0.154651 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 80 model components to the UV plane model. ! The established model now contains 80 components and 0.154651 Jy ! Inverting map and beam ! Estimated beam: bmin=4.318 mas, bmaj=21.89 mas, bpa=-20.37 degrees ! Estimated noise=856.049 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203325 Jy ! Component: 100 - total flux cleaned = 0.0336823 Jy ! Component: 150 - total flux cleaned = 0.0427571 Jy ! Component: 200 - total flux cleaned = 0.0489956 Jy ! Total flux subtracted in 200 components = 0.0489956 Jy ! Clean residual min=-0.007483 max=0.010702 Jy/beam ! Clean residual mean=0.000004 rms=0.002893 Jy/beam ! Combined flux in latest and established models = 0.203647 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 140 components and 0.203647 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.846 mas, bmaj=31 mas, bpa=-16.89 degrees ! Estimated noise=970.844 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00631511 Jy ! Component: 100 - total flux cleaned = 0.00988009 Jy ! Component: 150 - total flux cleaned = 0.011108 Jy ! Component: 200 - total flux cleaned = 0.0114924 Jy ! Total flux subtracted in 200 components = 0.0114924 Jy ! Clean residual min=-0.008008 max=0.013886 Jy/beam ! Clean residual mean=0.000027 rms=0.003784 Jy/beam ! Combined flux in latest and established models = 0.215139 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000279965 Jy ! Component: 100 - total flux cleaned = 0.000594503 Jy ! Component: 150 - total flux cleaned = 0.000767215 Jy ! Component: 200 - total flux cleaned = 0.000983755 Jy ! Total flux subtracted in 200 components = 0.000983755 Jy ! Clean residual min=-0.008046 max=0.013616 Jy/beam ! Clean residual mean=0.000027 rms=0.003726 Jy/beam ! Combined flux in latest and established models = 0.216123 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 156 components and 0.216123 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.318 mas, bmaj=21.89 mas, bpa=-20.37 degrees ! Estimated noise=856.049 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000558014 Jy ! Component: 100 - total flux cleaned = -0.000508371 Jy ! Component: 150 - total flux cleaned = -0.000508267 Jy ! Component: 200 - total flux cleaned = -0.000473189 Jy ! Total flux subtracted in 200 components = -0.000473189 Jy ! Clean residual min=-0.005823 max=0.010172 Jy/beam ! Clean residual mean=0.000016 rms=0.002566 Jy/beam ! Combined flux in latest and established models = 0.21565 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 172 components and 0.21565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099649Jy sigma=0.000727 ! Fit after self-cal, rms=0.099539Jy sigma=0.000726 wmodel J0736-1853_S_2017_10_21_pus_map.mod ! Writing 172 model components to file: J0736-1853_S_2017_10_21_pus_map.mod wobs J0736-1853_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0736-1853_S_2017_10_21_pus_uvs.fits wwins J0736-1853_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0736-1853_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00409978 Jy ! Component: 100 - total flux cleaned = 0.00726676 Jy ! Component: 150 - total flux cleaned = 0.00995948 Jy ! Component: 200 - total flux cleaned = 0.0118666 Jy ! Component: 250 - total flux cleaned = 0.0133258 Jy ! Component: 300 - total flux cleaned = 0.0139586 Jy ! Component: 350 - total flux cleaned = 0.0141778 Jy ! Component: 400 - total flux cleaned = 0.0143846 Jy ! Component: 450 - total flux cleaned = 0.0143156 Jy ! Component: 500 - total flux cleaned = 0.014251 Jy ! Component: 550 - total flux cleaned = 0.0142501 Jy ! Component: 600 - total flux cleaned = 0.0141905 Jy ! Component: 650 - total flux cleaned = 0.0139638 Jy ! Component: 700 - total flux cleaned = 0.0138542 Jy ! Component: 750 - total flux cleaned = 0.0136923 Jy ! Component: 800 - total flux cleaned = 0.0134814 Jy ! Component: 850 - total flux cleaned = 0.0132759 Jy ! Component: 900 - total flux cleaned = 0.013025 Jy ! Component: 950 - total flux cleaned = 0.0127295 Jy ! Component: 1000 - total flux cleaned = 0.0123926 Jy ! Component: 1050 - total flux cleaned = 0.0121568 Jy ! Component: 1100 - total flux cleaned = 0.0117855 Jy ! Component: 1150 - total flux cleaned = 0.0115122 Jy ! Component: 1200 - total flux cleaned = 0.0112876 Jy ! Component: 1250 - total flux cleaned = 0.0111105 Jy ! Component: 1300 - total flux cleaned = 0.0109799 Jy ! Component: 1350 - total flux cleaned = 0.010808 Jy ! Component: 1400 - total flux cleaned = 0.0106806 Jy ! Component: 1450 - total flux cleaned = 0.0105553 Jy ! Component: 1500 - total flux cleaned = 0.0104312 Jy ! Component: 1550 - total flux cleaned = 0.0102678 Jy ! Component: 1600 - total flux cleaned = 0.0101464 Jy ! Component: 1650 - total flux cleaned = 0.00998686 Jy ! Component: 1700 - total flux cleaned = 0.00990798 Jy ! Component: 1750 - total flux cleaned = 0.00971215 Jy ! Component: 1800 - total flux cleaned = 0.00959593 Jy ! Component: 1850 - total flux cleaned = 0.00944234 Jy ! Component: 1900 - total flux cleaned = 0.00925235 Jy ! Component: 1950 - total flux cleaned = 0.00913959 Jy ! Component: 2000 - total flux cleaned = 0.00899013 Jy ! Component: 2050 - total flux cleaned = 0.00880428 Jy ! Component: 2100 - total flux cleaned = 0.00854605 Jy ! Component: 2150 - total flux cleaned = 0.00825316 Jy ! Component: 2200 - total flux cleaned = 0.00810746 Jy ! Component: 2250 - total flux cleaned = 0.00785392 Jy ! Component: 2300 - total flux cleaned = 0.00763803 Jy ! Component: 2350 - total flux cleaned = 0.00742325 Jy ! Component: 2400 - total flux cleaned = 0.00731634 Jy ! Component: 2450 - total flux cleaned = 0.00710323 Jy ! Component: 2500 - total flux cleaned = 0.00696179 Jy ! Component: 2550 - total flux cleaned = 0.00692659 Jy ! Component: 2600 - total flux cleaned = 0.00678576 Jy ! Component: 2650 - total flux cleaned = 0.00660979 Jy ! Component: 2700 - total flux cleaned = 0.00639869 Jy ! Component: 2750 - total flux cleaned = 0.00618797 Jy ! Component: 2800 - total flux cleaned = 0.00604731 Jy ! Component: 2850 - total flux cleaned = 0.00587114 Jy ! Component: 2900 - total flux cleaned = 0.00573006 Jy ! Component: 2950 - total flux cleaned = 0.00558853 Jy ! Component: 3000 - total flux cleaned = 0.00548197 Jy ! Component: 3050 - total flux cleaned = 0.00541088 Jy ! Component: 3100 - total flux cleaned = 0.00523262 Jy ! Component: 3150 - total flux cleaned = 0.00512526 Jy ! Component: 3200 - total flux cleaned = 0.00498134 Jy ! Component: 3250 - total flux cleaned = 0.00480094 Jy ! Component: 3300 - total flux cleaned = 0.0046558 Jy ! Component: 3350 - total flux cleaned = 0.00451013 Jy ! Component: 3400 - total flux cleaned = 0.00432713 Jy ! Component: 3450 - total flux cleaned = 0.00417954 Jy ! Component: 3500 - total flux cleaned = 0.00406842 Jy ! Component: 3550 - total flux cleaned = 0.00403113 Jy ! Component: 3600 - total flux cleaned = 0.00388112 Jy ! Component: 3650 - total flux cleaned = 0.0036924 Jy ! Component: 3700 - total flux cleaned = 0.00365436 Jy ! Component: 3750 - total flux cleaned = 0.00354029 Jy ! Component: 3800 - total flux cleaned = 0.00338678 Jy ! Component: 3850 - total flux cleaned = 0.00327105 Jy ! Component: 3900 - total flux cleaned = 0.00323218 Jy ! Component: 3950 - total flux cleaned = 0.00315353 Jy ! Component: 4000 - total flux cleaned = 0.00315374 Jy ! Component: 4050 - total flux cleaned = 0.00303478 Jy ! Total flux subtracted in 4096 components = 0.00295496 Jy ! Clean residual min=-0.002286 max=0.002574 Jy/beam ! Clean residual mean=0.000032 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.218605 Jy keep ! Adding 367 model components to the UV plane model. ! The established model now contains 539 components and 0.218605 Jy ![Exited script file: muppet] wmap "J0736-1853_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.318 x 21.89 at -20.37 degrees (North through East) ! Clean map min=-0.0047884 max=0.073586 Jy/beam ! Writing clean map to FITS file: J0736-1853_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0735856 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000947653 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.86347 3.86347 7.72694 15.4539 30.9078 61.8156 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.073 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.318 x 21.89 at -20.37 degrees (North through East) ! Clean map min=-0.0047884 max=0.073586 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0736-1853_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:53:27 2019