! Started logfile: J0736-1853_S_2017_10_09_pus_uvs.log on Sun May 12 13:07:12 2019 obs J0736-1853_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0736-1853_S_2017_10_09_pus_uva.fits ! AN table 1: 235 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.658865 visibilities/baseline/integration-bin. ! Found source: J0736-1853 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 22296 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0736-1853_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 480 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 587 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 482 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1313 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.949217Jy sigma=0.007978 ! Fit after self-cal, rms=0.915865Jy sigma=0.007706 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.496 mas, bmaj=14.2 mas, bpa=-19.46 degrees ! Estimated noise=1014.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0572335 Jy ! Component: 100 - total flux cleaned = 0.0856502 Jy ! Total flux subtracted in 100 components = 0.0856502 Jy ! Clean residual min=-0.010268 max=0.018333 Jy/beam ! Clean residual mean=-0.000088 rms=0.004453 Jy/beam ! Combined flux in latest and established models = 0.0856502 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.0856502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118043Jy sigma=0.000899 ! Fit after self-cal, rms=0.117452Jy sigma=0.000894 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=15.01 mas, bpa=-18.61 degrees ! Estimated noise=703.158 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.038405 Jy ! Component: 100 - total flux cleaned = 0.0664815 Jy ! Component: 150 - total flux cleaned = 0.0876559 Jy ! Component: 200 - total flux cleaned = 0.103702 Jy ! Total flux subtracted in 200 components = 0.103702 Jy ! Clean residual min=-0.010688 max=0.019088 Jy/beam ! Clean residual mean=-0.000170 rms=0.004696 Jy/beam ! Combined flux in latest and established models = 0.189352 Jy ! Performing phase self-cal ! Adding 78 model components to the UV plane model. ! The established model now contains 112 components and 0.189352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097379Jy sigma=0.000740 ! Fit after self-cal, rms=0.096462Jy sigma=0.000733 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.51 FD 1.06 HN 0.92 KP 1.04 ! LA 0.86 MK 1.08 NL 1.59 OV 1.00* ! PT 0.80 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.78 FD 1.08 HN 0.90 KP 1.01 ! LA 0.80 MK 1.07 NL 1.72 OV 1.00* ! PT 0.78 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.59 FD 1.03 HN 0.83 KP 0.89 ! LA 0.64 MK 1.14 NL 1.91 OV 1.00* ! PT 0.76 ! ! ! Correcting IF 4. ! A total of 342 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 HN 0.67 KP 1.00* ! LA 1.00* MK 0.96 NL 1.00* OV 1.00* ! PT 0.87 ! ! ! Fit before self-cal, rms=0.096462Jy sigma=0.000733 ! Fit after self-cal, rms=0.106651Jy sigma=0.000669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=16.98 mas, bpa=-18.83 degrees ! Estimated noise=746.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-68, 121.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00540408 Jy ! Component: 100 - total flux cleaned = 0.00498764 Jy ! Component: 150 - total flux cleaned = 0.00487417 Jy ! Component: 200 - total flux cleaned = 0.0047715 Jy ! Total flux subtracted in 200 components = 0.0047715 Jy ! Clean residual min=-0.005116 max=0.005227 Jy/beam ! Clean residual mean=-0.000004 rms=0.001313 Jy/beam ! Combined flux in latest and established models = 0.194124 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 131 components and 0.194124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105998Jy sigma=0.000665 ! Fit after self-cal, rms=0.106921Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106921Jy sigma=0.000662 ! Fit after self-cal, rms=0.104059Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.011 mas, bmaj=16.99 mas, bpa=-18.7 degrees ! Estimated noise=726.637 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000819648 Jy ! Component: 100 - total flux cleaned = 0.000810933 Jy ! Component: 150 - total flux cleaned = 0.000746766 Jy ! Component: 200 - total flux cleaned = 0.000570265 Jy ! Total flux subtracted in 200 components = 0.000570265 Jy ! Clean residual min=-0.003780 max=0.003571 Jy/beam ! Clean residual mean=-0.000008 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.194694 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 155 components and 0.194694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103897Jy sigma=0.000659 ! Fit after self-cal, rms=0.103755Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.43184e-05 Jy ! Component: 100 - total flux cleaned = -0.000247219 Jy ! Component: 150 - total flux cleaned = -0.000302509 Jy ! Component: 200 - total flux cleaned = -0.000302096 Jy ! Total flux subtracted in 200 components = -0.000302096 Jy ! Clean residual min=-0.003735 max=0.003647 Jy/beam ! Clean residual mean=-0.000008 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.194392 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 166 components and 0.194392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103650Jy sigma=0.000658 ! Fit after self-cal, rms=0.103562Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103562Jy sigma=0.000658 ! Fit after self-cal, rms=0.101423Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.993 mas, bmaj=16.99 mas, bpa=-18.59 degrees ! Estimated noise=714.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00077377 Jy ! Component: 100 - total flux cleaned = 0.000841307 Jy ! Component: 150 - total flux cleaned = 0.000788168 Jy ! Component: 200 - total flux cleaned = 0.000744748 Jy ! Total flux subtracted in 200 components = 0.000744748 Jy ! Clean residual min=-0.003281 max=0.003506 Jy/beam ! Clean residual mean=-0.000006 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.195136 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 182 components and 0.195136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101336Jy sigma=0.000657 ! Fit after self-cal, rms=0.101229Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.13071e-05 Jy ! Component: 100 - total flux cleaned = -0.000139416 Jy ! Component: 150 - total flux cleaned = -0.000226151 Jy ! Component: 200 - total flux cleaned = -0.000304094 Jy ! Total flux subtracted in 200 components = -0.000304094 Jy ! Clean residual min=-0.003293 max=0.003462 Jy/beam ! Clean residual mean=-0.000006 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.194832 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 187 components and 0.194832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101172Jy sigma=0.000657 ! Fit after self-cal, rms=0.101113Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101113Jy sigma=0.000657 ! Fit after self-cal, rms=0.099576Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.45 mas, bmaj=20.6 mas, bpa=-7.143 degrees ! Estimated noise=903.722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116696 Jy ! Component: 100 - total flux cleaned = 0.00101888 Jy ! Component: 150 - total flux cleaned = 0.00093219 Jy ! Component: 200 - total flux cleaned = 0.000930233 Jy ! Total flux subtracted in 200 components = 0.000930233 Jy ! Clean residual min=-0.004703 max=0.005291 Jy/beam ! Clean residual mean=-0.000010 rms=0.001463 Jy/beam ! Combined flux in latest and established models = 0.195763 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 210 components and 0.195763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099528Jy sigma=0.000656 ! Fit after self-cal, rms=0.099428Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000131221 Jy ! Component: 100 - total flux cleaned = 4.98066e-05 Jy ! Component: 150 - total flux cleaned = 8.66018e-05 Jy ! Component: 200 - total flux cleaned = 8.6013e-05 Jy ! Total flux subtracted in 200 components = 8.6013e-05 Jy ! Clean residual min=-0.004620 max=0.005186 Jy/beam ! Clean residual mean=-0.000009 rms=0.001435 Jy/beam ! Combined flux in latest and established models = 0.195849 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 218 components and 0.195849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099401Jy sigma=0.000656 ! Fit after self-cal, rms=0.099376Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.986 mas, bmaj=16.98 mas, bpa=-18.54 degrees ! Estimated noise=706.772 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.986 x 16.98 at -18.54 degrees (North through East) ! Clean map min=-0.0062162 max=0.067434 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.455 mas, bmaj=15.86 mas, bpa=-19.06 degrees ! Estimated noise=1010.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0566398 Jy ! Component: 100 - total flux cleaned = 0.0865814 Jy ! Component: 150 - total flux cleaned = 0.107751 Jy ! Component: 200 - total flux cleaned = 0.123924 Jy ! Total flux subtracted in 200 components = 0.123924 Jy ! Clean residual min=-0.007246 max=0.011493 Jy/beam ! Clean residual mean=-0.000043 rms=0.002567 Jy/beam ! Combined flux in latest and established models = 0.123924 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 69 model components to the UV plane model. ! The established model now contains 69 components and 0.123924 Jy ! Inverting map and beam ! Estimated beam: bmin=2.986 mas, bmaj=16.98 mas, bpa=-18.54 degrees ! Estimated noise=706.772 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203745 Jy ! Component: 100 - total flux cleaned = 0.0346505 Jy ! Component: 150 - total flux cleaned = 0.0451232 Jy ! Component: 200 - total flux cleaned = 0.0528522 Jy ! Total flux subtracted in 200 components = 0.0528522 Jy ! Clean residual min=-0.005592 max=0.006869 Jy/beam ! Clean residual mean=-0.000047 rms=0.001632 Jy/beam ! Combined flux in latest and established models = 0.176776 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 147 components and 0.176776 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.45 mas, bmaj=20.6 mas, bpa=-7.143 degrees ! Estimated noise=903.722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00967964 Jy ! Component: 100 - total flux cleaned = 0.0149515 Jy ! Component: 150 - total flux cleaned = 0.0163462 Jy ! Component: 200 - total flux cleaned = 0.0165641 Jy ! Total flux subtracted in 200 components = 0.0165641 Jy ! Clean residual min=-0.005598 max=0.005102 Jy/beam ! Clean residual mean=-0.000018 rms=0.001606 Jy/beam ! Combined flux in latest and established models = 0.19334 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183989 Jy ! Component: 100 - total flux cleaned = 0.000264423 Jy ! Component: 150 - total flux cleaned = 0.000407679 Jy ! Component: 200 - total flux cleaned = 0.000469943 Jy ! Total flux subtracted in 200 components = 0.000469943 Jy ! Clean residual min=-0.005024 max=0.004991 Jy/beam ! Clean residual mean=-0.000015 rms=0.001486 Jy/beam ! Combined flux in latest and established models = 0.19381 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 204 components and 0.19381 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.986 mas, bmaj=16.98 mas, bpa=-18.54 degrees ! Estimated noise=706.772 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.08589e-05 Jy ! Component: 100 - total flux cleaned = -7.2251e-05 Jy ! Component: 150 - total flux cleaned = -6.90823e-05 Jy ! Component: 200 - total flux cleaned = -0.000121404 Jy ! Total flux subtracted in 200 components = -0.000121404 Jy ! Clean residual min=-0.003708 max=0.003552 Jy/beam ! Clean residual mean=-0.000008 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.193689 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 229 components and 0.193689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099449Jy sigma=0.000657 ! Fit after self-cal, rms=0.098998Jy sigma=0.000656 wmodel J0736-1853_S_2017_10_09_pus_map.mod ! Writing 229 model components to file: J0736-1853_S_2017_10_09_pus_map.mod wobs J0736-1853_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0736-1853_S_2017_10_09_pus_uvs.fits wwins J0736-1853_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J0736-1853_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000251864 Jy ! Component: 100 - total flux cleaned = 0.00106173 Jy ! Component: 150 - total flux cleaned = 0.00179187 Jy ! Component: 200 - total flux cleaned = 0.00221355 Jy ! Component: 250 - total flux cleaned = 0.00252684 Jy ! Component: 300 - total flux cleaned = 0.00285913 Jy ! Component: 350 - total flux cleaned = 0.00320753 Jy ! Component: 400 - total flux cleaned = 0.00350398 Jy ! Component: 450 - total flux cleaned = 0.00359807 Jy ! Component: 500 - total flux cleaned = 0.00362872 Jy ! Component: 550 - total flux cleaned = 0.0036574 Jy ! Component: 600 - total flux cleaned = 0.00365766 Jy ! Component: 650 - total flux cleaned = 0.00365775 Jy ! Component: 700 - total flux cleaned = 0.00358151 Jy ! Component: 750 - total flux cleaned = 0.00358176 Jy ! Component: 800 - total flux cleaned = 0.00355738 Jy ! Component: 850 - total flux cleaned = 0.00344335 Jy ! Component: 900 - total flux cleaned = 0.00344332 Jy ! Component: 950 - total flux cleaned = 0.00333567 Jy ! Component: 1000 - total flux cleaned = 0.00327274 Jy ! Component: 1050 - total flux cleaned = 0.00311086 Jy ! Component: 1100 - total flux cleaned = 0.00299259 Jy ! Component: 1150 - total flux cleaned = 0.0029535 Jy ! Component: 1200 - total flux cleaned = 0.00276614 Jy ! Component: 1250 - total flux cleaned = 0.00269292 Jy ! Component: 1300 - total flux cleaned = 0.00258545 Jy ! Component: 1350 - total flux cleaned = 0.00255037 Jy ! Component: 1400 - total flux cleaned = 0.00251556 Jy ! Component: 1450 - total flux cleaned = 0.00244808 Jy ! Component: 1500 - total flux cleaned = 0.00239845 Jy ! Component: 1550 - total flux cleaned = 0.00230193 Jy ! Component: 1600 - total flux cleaned = 0.00223897 Jy ! Component: 1650 - total flux cleaned = 0.00220797 Jy ! Component: 1700 - total flux cleaned = 0.00217767 Jy ! Component: 1750 - total flux cleaned = 0.00213297 Jy ! Component: 1800 - total flux cleaned = 0.00203071 Jy ! Component: 1850 - total flux cleaned = 0.00197327 Jy ! Component: 1900 - total flux cleaned = 0.00187441 Jy ! Component: 1950 - total flux cleaned = 0.00180471 Jy ! Component: 2000 - total flux cleaned = 0.00175018 Jy ! Component: 2050 - total flux cleaned = 0.00165619 Jy ! Component: 2100 - total flux cleaned = 0.00157726 Jy ! Component: 2150 - total flux cleaned = 0.0014863 Jy ! Component: 2200 - total flux cleaned = 0.00142214 Jy ! Component: 2250 - total flux cleaned = 0.00129595 Jy ! Component: 2300 - total flux cleaned = 0.0012339 Jy ! Component: 2350 - total flux cleaned = 0.00109922 Jy ! Component: 2400 - total flux cleaned = 0.00103897 Jy ! Component: 2450 - total flux cleaned = 0.000967617 Jy ! Component: 2500 - total flux cleaned = 0.000873826 Jy ! Component: 2550 - total flux cleaned = 0.000827487 Jy ! Component: 2600 - total flux cleaned = 0.000701951 Jy ! Component: 2650 - total flux cleaned = 0.000657015 Jy ! Component: 2700 - total flux cleaned = 0.000568101 Jy ! Component: 2750 - total flux cleaned = 0.000535024 Jy ! Component: 2800 - total flux cleaned = 0.00048057 Jy ! Component: 2850 - total flux cleaned = 0.000373545 Jy ! Component: 2900 - total flux cleaned = 0.000310186 Jy ! Component: 2950 - total flux cleaned = 0.000257952 Jy ! Component: 3000 - total flux cleaned = 0.000247604 Jy ! Component: 3050 - total flux cleaned = 0.000196468 Jy ! Component: 3100 - total flux cleaned = 0.000176234 Jy ! Component: 3150 - total flux cleaned = 0.000126298 Jy ! Component: 3200 - total flux cleaned = 0.000116459 Jy ! Component: 3250 - total flux cleaned = 9.69271e-05 Jy ! Component: 3300 - total flux cleaned = 6.7745e-05 Jy ! Component: 3350 - total flux cleaned = 6.78183e-05 Jy ! Component: 3400 - total flux cleaned = 7.74204e-05 Jy ! Component: 3450 - total flux cleaned = 5.85438e-05 Jy ! Component: 3500 - total flux cleaned = 4.92225e-05 Jy ! Component: 3550 - total flux cleaned = 5.8547e-05 Jy ! Component: 3600 - total flux cleaned = 4.00939e-05 Jy ! Component: 3650 - total flux cleaned = 5.83187e-05 Jy ! Component: 3700 - total flux cleaned = 3.11149e-05 Jy ! Component: 3750 - total flux cleaned = 4.01526e-05 Jy ! Component: 3800 - total flux cleaned = 4.90113e-05 Jy ! Component: 3850 - total flux cleaned = 5.78169e-05 Jy ! Component: 3900 - total flux cleaned = 6.66496e-05 Jy ! Component: 3950 - total flux cleaned = 7.53914e-05 Jy ! Component: 4000 - total flux cleaned = 8.41838e-05 Jy ! Component: 4050 - total flux cleaned = 0.000118697 Jy ! Total flux subtracted in 4096 components = 0.000144385 Jy ! Clean residual min=-0.000470 max=0.000668 Jy/beam ! Clean residual mean=-0.000003 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.193833 Jy keep ! Adding 349 model components to the UV plane model. ! The established model now contains 578 components and 0.193833 Jy ![Exited script file: muppet] wmap "J0736-1853_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.986 x 16.98 at -18.54 degrees (North through East) ! Clean map min=-0.0034894 max=0.069616 Jy/beam ! Writing clean map to FITS file: J0736-1853_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0696157 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00015988 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.688981 0.688981 1.37796 2.75592 5.51185 11.0237 22.0474 44.0948 88.1895 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.069 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.986 x 16.98 at -18.54 degrees (North through East) ! Clean map min=-0.0034894 max=0.069616 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0736-1853_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:07:18 2019