! Started logfile: J0736-1853_S_2017_07_16_pus_uvs.log on Thu May 9 11:03:58 2019 obs J0736-1853_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0736-1853_S_2017_07_16_pus_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.608676 visibilities/baseline/integration-bin. ! Found source: J0736-1853 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 15996 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0736-1853_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 306 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 321 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 348 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1046 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.973502Jy sigma=0.007157 ! Fit after self-cal, rms=0.932291Jy sigma=0.006874 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.287 mas, bmaj=6.393 mas, bpa=-7.558 degrees ! Estimated noise=1181.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0461071 Jy ! Component: 100 - total flux cleaned = 0.0641045 Jy ! Total flux subtracted in 100 components = 0.0641045 Jy ! Clean residual min=-0.007963 max=0.013901 Jy/beam ! Clean residual mean=-0.000062 rms=0.003183 Jy/beam ! Combined flux in latest and established models = 0.0641045 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0641045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108623Jy sigma=0.000807 ! Fit after self-cal, rms=0.107947Jy sigma=0.000802 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.769 mas, bmaj=7.458 mas, bpa=-5.981 degrees ! Estimated noise=880.174 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0302018 Jy ! Component: 100 - total flux cleaned = 0.0491368 Jy ! Component: 150 - total flux cleaned = 0.0610876 Jy ! Component: 200 - total flux cleaned = 0.0686314 Jy ! Total flux subtracted in 200 components = 0.0686314 Jy ! Clean residual min=-0.012237 max=0.019984 Jy/beam ! Clean residual mean=-0.000111 rms=0.004836 Jy/beam ! Combined flux in latest and established models = 0.132736 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 37 components and 0.132736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099542Jy sigma=0.000724 ! Fit after self-cal, rms=0.098670Jy sigma=0.000718 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.48 KP 0.84 ! LA 0.80 MK 0.94 NL 2.01 OV 1.33 ! PT 0.72 SC 1.42 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.57 KP 0.80 ! LA 0.78 MK 1.02 NL 1.98 OV 1.37 ! PT 0.69 SC 1.42 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.54 KP 0.85 ! LA 0.75 MK 1.17 NL 1.98 OV 1.23 ! PT 0.68 SC 1.30 ! ! ! Correcting IF 4. ! A total of 414 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.098670Jy sigma=0.000718 ! Fit after self-cal, rms=0.150347Jy sigma=0.000664 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.002 mas, bmaj=8.068 mas, bpa=-6.644 degrees ! Estimated noise=985.142 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000968897 Jy ! Component: 100 - total flux cleaned = 0.000978065 Jy ! Component: 150 - total flux cleaned = 0.000983485 Jy ! Component: 200 - total flux cleaned = 0.000991126 Jy ! Total flux subtracted in 200 components = 0.000991126 Jy ! Clean residual min=-0.007799 max=0.010127 Jy/beam ! Clean residual mean=-0.000016 rms=0.002602 Jy/beam ! Combined flux in latest and established models = 0.133727 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 41 components and 0.133727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150042Jy sigma=0.000664 ! Fit after self-cal, rms=0.154370Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154370Jy sigma=0.000658 ! Fit after self-cal, rms=0.178334Jy sigma=0.000650 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=8.37 mas, bpa=-8.136 degrees ! Estimated noise=973.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010961 Jy ! Component: 100 - total flux cleaned = 0.00109281 Jy ! Component: 150 - total flux cleaned = 0.00103281 Jy ! Component: 200 - total flux cleaned = 0.00109062 Jy ! Total flux subtracted in 200 components = 0.00109062 Jy ! Clean residual min=-0.005377 max=0.007028 Jy/beam ! Clean residual mean=-0.000017 rms=0.001872 Jy/beam ! Combined flux in latest and established models = 0.134818 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 45 components and 0.134818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178230Jy sigma=0.000650 ! Fit after self-cal, rms=0.178890Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000179752 Jy ! Component: 100 - total flux cleaned = -7.74783e-05 Jy ! Component: 150 - total flux cleaned = 1.7273e-05 Jy ! Component: 200 - total flux cleaned = 0.000104902 Jy ! Total flux subtracted in 200 components = 0.000104902 Jy ! Clean residual min=-0.005198 max=0.006647 Jy/beam ! Clean residual mean=-0.000018 rms=0.001856 Jy/beam ! Combined flux in latest and established models = 0.134923 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.134923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178854Jy sigma=0.000649 ! Fit after self-cal, rms=0.178816Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178816Jy sigma=0.000649 ! Fit after self-cal, rms=0.181857Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.919 mas, bmaj=8.558 mas, bpa=-8.532 degrees ! Estimated noise=962.971 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000630151 Jy ! Component: 100 - total flux cleaned = 0.000629498 Jy ! Component: 150 - total flux cleaned = 0.000630484 Jy ! Component: 200 - total flux cleaned = 0.000631475 Jy ! Total flux subtracted in 200 components = 0.000631475 Jy ! Clean residual min=-0.005202 max=0.006534 Jy/beam ! Clean residual mean=-0.000018 rms=0.001814 Jy/beam ! Combined flux in latest and established models = 0.135554 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 52 components and 0.135554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181795Jy sigma=0.000648 ! Fit after self-cal, rms=0.181760Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.63942e-05 Jy ! Component: 100 - total flux cleaned = 0.000186708 Jy ! Component: 150 - total flux cleaned = 0.000229201 Jy ! Component: 200 - total flux cleaned = 0.000268073 Jy ! Total flux subtracted in 200 components = 0.000268073 Jy ! Clean residual min=-0.005241 max=0.006533 Jy/beam ! Clean residual mean=-0.000017 rms=0.001815 Jy/beam ! Combined flux in latest and established models = 0.135822 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.135822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181727Jy sigma=0.000648 ! Fit after self-cal, rms=0.181710Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181710Jy sigma=0.000648 ! Fit after self-cal, rms=0.183290Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.788 mas, bmaj=20.49 mas, bpa=-8.902 degrees ! Estimated noise=1161.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127168 Jy ! Component: 100 - total flux cleaned = 0.00132374 Jy ! Component: 150 - total flux cleaned = 0.0014329 Jy ! Component: 200 - total flux cleaned = 0.00152917 Jy ! Total flux subtracted in 200 components = 0.00152917 Jy ! Clean residual min=-0.008566 max=0.012242 Jy/beam ! Clean residual mean=-0.000035 rms=0.003597 Jy/beam ! Combined flux in latest and established models = 0.137351 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 53 components and 0.137351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183235Jy sigma=0.000648 ! Fit after self-cal, rms=0.183138Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015026 Jy ! Component: 100 - total flux cleaned = 0.000151681 Jy ! Component: 150 - total flux cleaned = 0.000153498 Jy ! Component: 200 - total flux cleaned = 0.000229817 Jy ! Total flux subtracted in 200 components = 0.000229817 Jy ! Clean residual min=-0.008504 max=0.012268 Jy/beam ! Clean residual mean=-0.000035 rms=0.003583 Jy/beam ! Combined flux in latest and established models = 0.137581 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 55 components and 0.137581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183122Jy sigma=0.000649 ! Fit after self-cal, rms=0.182982Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.905 mas, bmaj=8.721 mas, bpa=-8.85 degrees ! Estimated noise=955.218 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.905 x 8.721 at -8.85 degrees (North through East) ! Clean map min=-0.0050811 max=0.057372 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.384 mas, bmaj=7.363 mas, bpa=-9.675 degrees ! Estimated noise=1324.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0500768 Jy ! Component: 100 - total flux cleaned = 0.077655 Jy ! Component: 150 - total flux cleaned = 0.0959042 Jy ! Component: 200 - total flux cleaned = 0.108089 Jy ! Total flux subtracted in 200 components = 0.108089 Jy ! Clean residual min=-0.006516 max=0.008782 Jy/beam ! Clean residual mean=-0.000026 rms=0.001768 Jy/beam ! Combined flux in latest and established models = 0.108089 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.108089 Jy ! Inverting map and beam ! Estimated beam: bmin=2.905 mas, bmaj=8.721 mas, bpa=-8.85 degrees ! Estimated noise=955.218 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129469 Jy ! Component: 100 - total flux cleaned = 0.0198473 Jy ! Component: 150 - total flux cleaned = 0.0236263 Jy ! Component: 200 - total flux cleaned = 0.0243421 Jy ! Total flux subtracted in 200 components = 0.0243421 Jy ! Clean residual min=-0.006014 max=0.006668 Jy/beam ! Clean residual mean=-0.000023 rms=0.001895 Jy/beam ! Combined flux in latest and established models = 0.132431 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 37 components and 0.132431 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.788 mas, bmaj=20.49 mas, bpa=-8.902 degrees ! Estimated noise=1161.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00379002 Jy ! Component: 100 - total flux cleaned = 0.00427345 Jy ! Component: 150 - total flux cleaned = 0.00438397 Jy ! Component: 200 - total flux cleaned = 0.00448139 Jy ! Total flux subtracted in 200 components = 0.00448139 Jy ! Clean residual min=-0.008595 max=0.012414 Jy/beam ! Clean residual mean=-0.000038 rms=0.003607 Jy/beam ! Combined flux in latest and established models = 0.136912 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.49936e-05 Jy ! Component: 100 - total flux cleaned = 8.80253e-05 Jy ! Component: 150 - total flux cleaned = 0.000127454 Jy ! Component: 200 - total flux cleaned = 0.000166549 Jy ! Total flux subtracted in 200 components = 0.000166549 Jy ! Clean residual min=-0.008513 max=0.012395 Jy/beam ! Clean residual mean=-0.000037 rms=0.003594 Jy/beam ! Combined flux in latest and established models = 0.137079 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.137079 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.905 mas, bmaj=8.721 mas, bpa=-8.85 degrees ! Estimated noise=955.218 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00233226 Jy ! Component: 100 - total flux cleaned = -0.00245797 Jy ! Component: 150 - total flux cleaned = -0.00263488 Jy ! Component: 200 - total flux cleaned = -0.00256745 Jy ! Total flux subtracted in 200 components = -0.00256745 Jy ! Clean residual min=-0.005324 max=0.006768 Jy/beam ! Clean residual mean=-0.000021 rms=0.001832 Jy/beam ! Combined flux in latest and established models = 0.134511 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.134511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182991Jy sigma=0.000648 ! Fit after self-cal, rms=0.183110Jy sigma=0.000648 wmodel J0736-1853_S_2017_07_16_pus_map.mod ! Writing 51 model components to file: J0736-1853_S_2017_07_16_pus_map.mod wobs J0736-1853_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0736-1853_S_2017_07_16_pus_uvs.fits wwins J0736-1853_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J0736-1853_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028447 Jy ! Component: 100 - total flux cleaned = 0.00436634 Jy ! Component: 150 - total flux cleaned = 0.0052141 Jy ! Component: 200 - total flux cleaned = 0.00592859 Jy ! Component: 250 - total flux cleaned = 0.00685759 Jy ! Component: 300 - total flux cleaned = 0.00733983 Jy ! Component: 350 - total flux cleaned = 0.007871 Jy ! Component: 400 - total flux cleaned = 0.00830713 Jy ! Component: 450 - total flux cleaned = 0.00837968 Jy ! Component: 500 - total flux cleaned = 0.00844921 Jy ! Component: 550 - total flux cleaned = 0.00857895 Jy ! Component: 600 - total flux cleaned = 0.00876459 Jy ! Component: 650 - total flux cleaned = 0.00870534 Jy ! Component: 700 - total flux cleaned = 0.00893538 Jy ! Component: 750 - total flux cleaned = 0.00904893 Jy ! Component: 800 - total flux cleaned = 0.00910321 Jy ! Component: 850 - total flux cleaned = 0.00925888 Jy ! Component: 900 - total flux cleaned = 0.00940912 Jy ! Component: 950 - total flux cleaned = 0.00950566 Jy ! Component: 1000 - total flux cleaned = 0.00945595 Jy ! Component: 1050 - total flux cleaned = 0.00973416 Jy ! Component: 1100 - total flux cleaned = 0.00968917 Jy ! Component: 1150 - total flux cleaned = 0.00986695 Jy ! Component: 1200 - total flux cleaned = 0.00999588 Jy ! Component: 1250 - total flux cleaned = 0.0100378 Jy ! Component: 1300 - total flux cleaned = 0.0101602 Jy ! Component: 1350 - total flux cleaned = 0.0101607 Jy ! Component: 1400 - total flux cleaned = 0.0103556 Jy ! Component: 1450 - total flux cleaned = 0.0102788 Jy ! Component: 1500 - total flux cleaned = 0.0103906 Jy ! Component: 1550 - total flux cleaned = 0.0103907 Jy ! Component: 1600 - total flux cleaned = 0.0105332 Jy ! Component: 1650 - total flux cleaned = 0.0105329 Jy ! Component: 1700 - total flux cleaned = 0.0106694 Jy ! Component: 1750 - total flux cleaned = 0.0107029 Jy ! Component: 1800 - total flux cleaned = 0.0106704 Jy ! Component: 1850 - total flux cleaned = 0.0107671 Jy ! Component: 1900 - total flux cleaned = 0.0108607 Jy ! Component: 1950 - total flux cleaned = 0.010952 Jy ! Component: 2000 - total flux cleaned = 0.0109811 Jy ! Component: 2050 - total flux cleaned = 0.0110114 Jy ! Component: 2100 - total flux cleaned = 0.0111279 Jy ! Component: 2150 - total flux cleaned = 0.0112136 Jy ! Component: 2200 - total flux cleaned = 0.0112415 Jy ! Component: 2250 - total flux cleaned = 0.0114069 Jy ! Component: 2300 - total flux cleaned = 0.0114335 Jy ! Component: 2350 - total flux cleaned = 0.0113792 Jy ! Component: 2400 - total flux cleaned = 0.0113791 Jy ! Component: 2450 - total flux cleaned = 0.0113276 Jy ! Component: 2500 - total flux cleaned = 0.011379 Jy ! Component: 2550 - total flux cleaned = 0.0114038 Jy ! Component: 2600 - total flux cleaned = 0.0113538 Jy ! Component: 2650 - total flux cleaned = 0.0113536 Jy ! Component: 2700 - total flux cleaned = 0.0112328 Jy ! Component: 2750 - total flux cleaned = 0.0112327 Jy ! Component: 2800 - total flux cleaned = 0.0112095 Jy ! Component: 2850 - total flux cleaned = 0.0111399 Jy ! Component: 2900 - total flux cleaned = 0.0110478 Jy ! Component: 2950 - total flux cleaned = 0.0109342 Jy ! Component: 3000 - total flux cleaned = 0.0108221 Jy ! Component: 3050 - total flux cleaned = 0.0107552 Jy ! Component: 3100 - total flux cleaned = 0.0107115 Jy ! Component: 3150 - total flux cleaned = 0.0106464 Jy ! Component: 3200 - total flux cleaned = 0.0105818 Jy ! Component: 3250 - total flux cleaned = 0.0105604 Jy ! Component: 3300 - total flux cleaned = 0.0105181 Jy ! Component: 3350 - total flux cleaned = 0.0104141 Jy ! Component: 3400 - total flux cleaned = 0.0104144 Jy ! Component: 3450 - total flux cleaned = 0.0103942 Jy ! Component: 3500 - total flux cleaned = 0.0104145 Jy ! Component: 3550 - total flux cleaned = 0.0103947 Jy ! Component: 3600 - total flux cleaned = 0.0103945 Jy ! Component: 3650 - total flux cleaned = 0.0102961 Jy ! Component: 3700 - total flux cleaned = 0.0102374 Jy ! Component: 3750 - total flux cleaned = 0.0101794 Jy ! Component: 3800 - total flux cleaned = 0.0100837 Jy ! Component: 3850 - total flux cleaned = 0.0100456 Jy ! Component: 3900 - total flux cleaned = 0.0100265 Jy ! Component: 3950 - total flux cleaned = 0.00997012 Jy ! Component: 4000 - total flux cleaned = 0.00985839 Jy ! Component: 4050 - total flux cleaned = 0.00974763 Jy ! Total flux subtracted in 4096 components = 0.00971108 Jy ! Clean residual min=-0.001092 max=0.001018 Jy/beam ! Clean residual mean=0.000002 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.144222 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 360 components and 0.144223 Jy ![Exited script file: muppet] wmap "J0736-1853_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.905 x 8.721 at -8.85 degrees (North through East) ! Clean map min=-0.0034079 max=0.059153 Jy/beam ! Writing clean map to FITS file: J0736-1853_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.059153 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000339353 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.72106 1.72106 3.44212 6.88424 13.7685 27.537 55.0739 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.059 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.905 x 8.721 at -8.85 degrees (North through East) ! Clean map min=-0.0034079 max=0.059153 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0736-1853_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:04:03 2019