! Started logfile: J0736+2604_S_2017_06_10_pus_uvs.log on Mon May 6 14:47:13 2019 obs J0736+2604_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0736+2604_S_2017_06_10_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.969125 visibilities/baseline/integration-bin. ! Found source: J0736+2604 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 19712 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0736+2604_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 596 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.879591Jy sigma=0.008711 ! Fit after self-cal, rms=0.867371Jy sigma=0.008602 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.895 mas, bmaj=5.872 mas, bpa=-2.982 degrees ! Estimated noise=874.461 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.099857 Jy ! Component: 100 - total flux cleaned = 0.142582 Jy ! Total flux subtracted in 100 components = 0.142582 Jy ! Clean residual min=-0.010121 max=0.029979 Jy/beam ! Clean residual mean=-0.000020 rms=0.003013 Jy/beam ! Combined flux in latest and established models = 0.142582 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.142582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097700Jy sigma=0.000942 ! Fit after self-cal, rms=0.097347Jy sigma=0.000939 ! Inverting map ! Added new window around map position (-3.5, 4.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0308706 Jy ! Component: 100 - total flux cleaned = 0.049822 Jy ! Total flux subtracted in 100 components = 0.049822 Jy ! Clean residual min=-0.007555 max=0.018851 Jy/beam ! Clean residual mean=-0.000008 rms=0.001951 Jy/beam ! Combined flux in latest and established models = 0.192404 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 0.192404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084995Jy sigma=0.000799 ! Fit after self-cal, rms=0.084564Jy sigma=0.000795 ! Inverting map ! Added new window around map position (3.5, -5.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016392 Jy ! Component: 100 - total flux cleaned = 0.0207599 Jy ! Total flux subtracted in 100 components = 0.0207599 Jy ! Clean residual min=-0.006352 max=0.006929 Jy/beam ! Clean residual mean=-0.000001 rms=0.001520 Jy/beam ! Combined flux in latest and established models = 0.213164 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 34 components and 0.213164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080898Jy sigma=0.000755 ! Fit after self-cal, rms=0.080818Jy sigma=0.000755 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.439 mas, bmaj=6.843 mas, bpa=-2.004 degrees ! Estimated noise=581.849 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106035 Jy ! Component: 100 - total flux cleaned = 0.0141767 Jy ! Component: 150 - total flux cleaned = 0.0152975 Jy ! Component: 200 - total flux cleaned = 0.0162239 Jy ! Total flux subtracted in 200 components = 0.0162239 Jy ! Clean residual min=-0.004660 max=0.004479 Jy/beam ! Clean residual mean=0.000004 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 0.229388 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 56 components and 0.229388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079025Jy sigma=0.000735 ! Fit after self-cal, rms=0.078988Jy sigma=0.000735 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 0.94 HN 0.99 KP 1.01 ! LA 1.01 MK 1.30 NL 0.92 OV 0.99 ! PT 1.00 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.98 HN 1.01 KP 0.97 ! LA 0.97 MK 1.05 NL 1.02 OV 1.02 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.98 KP 0.96 ! LA 0.98 MK 0.99 NL 0.98 OV 0.94 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 0.96 KP 1.00* ! LA 0.99 MK 0.97 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.078988Jy sigma=0.000735 ! Fit after self-cal, rms=0.081772Jy sigma=0.000726 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.473 mas, bmaj=6.89 mas, bpa=-1.299 degrees ! Estimated noise=581.508 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00286203 Jy ! Component: 100 - total flux cleaned = -0.00383242 Jy ! Component: 150 - total flux cleaned = -0.00409185 Jy ! Component: 200 - total flux cleaned = -0.00424479 Jy ! Total flux subtracted in 200 components = -0.00424479 Jy ! Clean residual min=-0.003728 max=0.003879 Jy/beam ! Clean residual mean=0.000008 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.225143 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 68 components and 0.225143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081462Jy sigma=0.000724 ! Fit after self-cal, rms=0.081560Jy sigma=0.000723 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081560Jy sigma=0.000723 ! Fit after self-cal, rms=0.098878Jy sigma=0.000711 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.489 mas, bmaj=6.867 mas, bpa=-1.441 degrees ! Estimated noise=586.408 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00062292 Jy ! Component: 100 - total flux cleaned = -0.000911246 Jy ! Component: 150 - total flux cleaned = -0.0010335 Jy ! Component: 200 - total flux cleaned = -0.00119885 Jy ! Total flux subtracted in 200 components = -0.00119885 Jy ! Clean residual min=-0.002846 max=0.003049 Jy/beam ! Clean residual mean=0.000000 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.223944 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 77 components and 0.223944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098774Jy sigma=0.000710 ! Fit after self-cal, rms=0.099584Jy sigma=0.000710 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.5, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000839361 Jy ! Component: 100 - total flux cleaned = 0.00133309 Jy ! Component: 150 - total flux cleaned = 0.00133762 Jy ! Component: 200 - total flux cleaned = 0.00115287 Jy ! Total flux subtracted in 200 components = 0.00115287 Jy ! Clean residual min=-0.002740 max=0.002551 Jy/beam ! Clean residual mean=-0.000000 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.225097 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 92 components and 0.225097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099435Jy sigma=0.000708 ! Fit after self-cal, rms=0.099435Jy sigma=0.000708 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099435Jy sigma=0.000708 ! Fit after self-cal, rms=0.103564Jy sigma=0.000708 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=6.855 mas, bpa=-1.434 degrees ! Estimated noise=584.003 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000196687 Jy ! Component: 100 - total flux cleaned = -0.000199285 Jy ! Component: 150 - total flux cleaned = -0.000256399 Jy ! Component: 200 - total flux cleaned = -0.000360188 Jy ! Total flux subtracted in 200 components = -0.000360188 Jy ! Clean residual min=-0.002636 max=0.002467 Jy/beam ! Clean residual mean=-0.000001 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.224737 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 99 components and 0.224737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103485Jy sigma=0.000707 ! Fit after self-cal, rms=0.103578Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.39995e-05 Jy ! Component: 100 - total flux cleaned = 2.30209e-05 Jy ! Component: 150 - total flux cleaned = -2.36071e-05 Jy ! Component: 200 - total flux cleaned = -2.34952e-05 Jy ! Total flux subtracted in 200 components = -2.34952e-05 Jy ! Clean residual min=-0.002610 max=0.002453 Jy/beam ! Clean residual mean=-0.000001 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.224714 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 108 components and 0.224714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103530Jy sigma=0.000706 ! Fit after self-cal, rms=0.103538Jy sigma=0.000706 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103538Jy sigma=0.000706 ! Fit after self-cal, rms=0.103674Jy sigma=0.000706 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.409 mas, bmaj=10.61 mas, bpa=-7.059 degrees ! Estimated noise=719.412 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000187997 Jy ! Component: 100 - total flux cleaned = -1.07402e-05 Jy ! Component: 150 - total flux cleaned = -0.000117132 Jy ! Component: 200 - total flux cleaned = -0.000140873 Jy ! Total flux subtracted in 200 components = -0.000140873 Jy ! Clean residual min=-0.002057 max=0.002345 Jy/beam ! Clean residual mean=-0.000002 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.224573 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 119 components and 0.224573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103664Jy sigma=0.000706 ! Fit after self-cal, rms=0.103678Jy sigma=0.000706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-47, 12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129723 Jy ! Component: 100 - total flux cleaned = 0.0011292 Jy ! Component: 150 - total flux cleaned = 0.00112995 Jy ! Component: 200 - total flux cleaned = 0.00103337 Jy ! Total flux subtracted in 200 components = 0.00103337 Jy ! Clean residual min=-0.002092 max=0.001821 Jy/beam ! Clean residual mean=-0.000001 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.225606 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 141 components and 0.225606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103626Jy sigma=0.000706 ! Fit after self-cal, rms=0.103621Jy sigma=0.000706 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.472 mas, bmaj=6.84 mas, bpa=-1.348 degrees ! Estimated noise=582.549 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.472 x 6.84 at -1.348 degrees (North through East) ! Clean map min=-0.0077342 max=0.11738 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.911 mas, bmaj=5.839 mas, bpa=-2.625 degrees ! Estimated noise=875.103 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100603 Jy ! Component: 100 - total flux cleaned = 0.147859 Jy ! Component: 150 - total flux cleaned = 0.177031 Jy ! Component: 200 - total flux cleaned = 0.195397 Jy ! Total flux subtracted in 200 components = 0.195397 Jy ! Clean residual min=-0.008318 max=0.009611 Jy/beam ! Clean residual mean=-0.000007 rms=0.001588 Jy/beam ! Combined flux in latest and established models = 0.195397 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.195397 Jy ! Inverting map and beam ! Estimated beam: bmin=3.472 mas, bmaj=6.84 mas, bpa=-1.348 degrees ! Estimated noise=582.549 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151024 Jy ! Component: 100 - total flux cleaned = 0.021782 Jy ! Component: 150 - total flux cleaned = 0.0229297 Jy ! Component: 200 - total flux cleaned = 0.0238647 Jy ! Total flux subtracted in 200 components = 0.0238647 Jy ! Clean residual min=-0.003779 max=0.003581 Jy/beam ! Clean residual mean=-0.000003 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.219261 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 49 components and 0.219261 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.409 mas, bmaj=10.61 mas, bpa=-7.059 degrees ! Estimated noise=719.412 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00471696 Jy ! Component: 100 - total flux cleaned = 0.00560567 Jy ! Component: 150 - total flux cleaned = 0.00580785 Jy ! Component: 200 - total flux cleaned = 0.00598298 Jy ! Total flux subtracted in 200 components = 0.00598298 Jy ! Clean residual min=-0.002620 max=0.002176 Jy/beam ! Clean residual mean=-0.000001 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.225244 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209867 Jy ! Component: 100 - total flux cleaned = 0.000462723 Jy ! Component: 150 - total flux cleaned = 0.000633536 Jy ! Component: 200 - total flux cleaned = 0.000741479 Jy ! Total flux subtracted in 200 components = 0.000741479 Jy ! Clean residual min=-0.002460 max=0.001957 Jy/beam ! Clean residual mean=-0.000001 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.225986 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 98 components and 0.225986 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.472 mas, bmaj=6.84 mas, bpa=-1.348 degrees ! Estimated noise=582.549 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000798487 Jy ! Component: 100 - total flux cleaned = -0.000448361 Jy ! Component: 150 - total flux cleaned = -0.000343682 Jy ! Component: 200 - total flux cleaned = -0.000155018 Jy ! Total flux subtracted in 200 components = -0.000155018 Jy ! Clean residual min=-0.002796 max=0.002544 Jy/beam ! Clean residual mean=-0.000001 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.225831 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 119 components and 0.225831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103799Jy sigma=0.000708 ! Fit after self-cal, rms=0.103801Jy sigma=0.000707 wmodel J0736+2604_S_2017_06_10_pus_map.mod ! Writing 119 model components to file: J0736+2604_S_2017_06_10_pus_map.mod wobs J0736+2604_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0736+2604_S_2017_06_10_pus_uvs.fits wwins J0736+2604_S_2017_06_10_pus_map.win ! wwins: Wrote 5 windows to J0736+2604_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119944 Jy ! Component: 100 - total flux cleaned = -0.00160643 Jy ! Component: 150 - total flux cleaned = -0.00190665 Jy ! Component: 200 - total flux cleaned = -0.00203308 Jy ! Component: 250 - total flux cleaned = -0.00211505 Jy ! Component: 300 - total flux cleaned = -0.0021548 Jy ! Component: 350 - total flux cleaned = -0.00223258 Jy ! Component: 400 - total flux cleaned = -0.00230945 Jy ! Component: 450 - total flux cleaned = -0.00242183 Jy ! Component: 500 - total flux cleaned = -0.00245836 Jy ! Component: 550 - total flux cleaned = -0.00253039 Jy ! Component: 600 - total flux cleaned = -0.00256573 Jy ! Component: 650 - total flux cleaned = -0.0025664 Jy ! Component: 700 - total flux cleaned = -0.00256703 Jy ! Component: 750 - total flux cleaned = -0.00260094 Jy ! Component: 800 - total flux cleaned = -0.00256822 Jy ! Component: 850 - total flux cleaned = -0.00250337 Jy ! Component: 900 - total flux cleaned = -0.00256775 Jy ! Component: 950 - total flux cleaned = -0.00247222 Jy ! Component: 1000 - total flux cleaned = -0.00250338 Jy ! Component: 1050 - total flux cleaned = -0.00241011 Jy ! Component: 1100 - total flux cleaned = -0.00241043 Jy ! Component: 1150 - total flux cleaned = -0.00231984 Jy ! Component: 1200 - total flux cleaned = -0.00234966 Jy ! Component: 1250 - total flux cleaned = -0.00232035 Jy ! Component: 1300 - total flux cleaned = -0.00231986 Jy ! Component: 1350 - total flux cleaned = -0.00223353 Jy ! Component: 1400 - total flux cleaned = -0.00217678 Jy ! Component: 1450 - total flux cleaned = -0.00206448 Jy ! Component: 1500 - total flux cleaned = -0.0020646 Jy ! Component: 1550 - total flux cleaned = -0.00209206 Jy ! Component: 1600 - total flux cleaned = -0.00203743 Jy ! Component: 1650 - total flux cleaned = -0.00198317 Jy ! Component: 1700 - total flux cleaned = -0.00195686 Jy ! Component: 1750 - total flux cleaned = -0.00193078 Jy ! Component: 1800 - total flux cleaned = -0.00187873 Jy ! Component: 1850 - total flux cleaned = -0.00185301 Jy ! Component: 1900 - total flux cleaned = -0.00190397 Jy ! Component: 1950 - total flux cleaned = -0.00182794 Jy ! Component: 2000 - total flux cleaned = -0.0017528 Jy ! Component: 2050 - total flux cleaned = -0.0016788 Jy ! Component: 2100 - total flux cleaned = -0.00167886 Jy ! Component: 2150 - total flux cleaned = -0.00170325 Jy ! Component: 2200 - total flux cleaned = -0.00155874 Jy ! Component: 2250 - total flux cleaned = -0.00151164 Jy ! Component: 2300 - total flux cleaned = -0.0014647 Jy ! Component: 2350 - total flux cleaned = -0.00134751 Jy ! Component: 2400 - total flux cleaned = -0.00130123 Jy ! Component: 2450 - total flux cleaned = -0.00123241 Jy ! Component: 2500 - total flux cleaned = -0.0011867 Jy ! Component: 2550 - total flux cleaned = -0.0010513 Jy ! Component: 2600 - total flux cleaned = -0.00100651 Jy ! Component: 2650 - total flux cleaned = -0.000961979 Jy ! Component: 2700 - total flux cleaned = -0.00085153 Jy ! Component: 2750 - total flux cleaned = -0.000764125 Jy ! Component: 2800 - total flux cleaned = -0.000699242 Jy ! Component: 2850 - total flux cleaned = -0.00065616 Jy ! Component: 2900 - total flux cleaned = -0.000634859 Jy ! Component: 2950 - total flux cleaned = -0.000507817 Jy ! Component: 3000 - total flux cleaned = -0.000466029 Jy ! Component: 3050 - total flux cleaned = -0.000465778 Jy ! Component: 3100 - total flux cleaned = -0.000423969 Jy ! Component: 3150 - total flux cleaned = -0.000300613 Jy ! Component: 3200 - total flux cleaned = -0.000219365 Jy ! Component: 3250 - total flux cleaned = -0.000260072 Jy ! Component: 3300 - total flux cleaned = -0.000279936 Jy ! Component: 3350 - total flux cleaned = -0.000279916 Jy ! Component: 3400 - total flux cleaned = -0.000160715 Jy ! Component: 3450 - total flux cleaned = -0.000239178 Jy ! Component: 3500 - total flux cleaned = -0.000180006 Jy ! Component: 3550 - total flux cleaned = -0.000102356 Jy ! Component: 3600 - total flux cleaned = -6.37281e-05 Jy ! Component: 3650 - total flux cleaned = -4.4727e-05 Jy ! Component: 3700 - total flux cleaned = -0.000120915 Jy ! Component: 3750 - total flux cleaned = -8.31225e-05 Jy ! Component: 3800 - total flux cleaned = -8.30091e-05 Jy ! Component: 3850 - total flux cleaned = -6.43157e-05 Jy ! Component: 3900 - total flux cleaned = 0.000102459 Jy ! Component: 3950 - total flux cleaned = 0.000120852 Jy ! Component: 4000 - total flux cleaned = 0.000157475 Jy ! Component: 4050 - total flux cleaned = 0.000248378 Jy ! Total flux subtracted in 4096 components = 0.000194115 Jy ! Clean residual min=-0.000973 max=0.000980 Jy/beam ! Clean residual mean=-0.000002 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.226025 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 403 components and 0.226025 Jy ![Exited script file: muppet] wmap "J0736+2604_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.472 x 6.84 at -1.348 degrees (North through East) ! Clean map min=-0.0058148 max=0.11892 Jy/beam ! Writing clean map to FITS file: J0736+2604_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.118922 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000332415 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.838567 0.838567 1.67713 3.35427 6.70853 13.4171 26.8341 53.6683 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.118 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.472 x 6.84 at -1.348 degrees (North through East) ! Clean map min=-0.0058148 max=0.11892 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0736+2604_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:47:19 2019