! Started logfile: J0735+2341_S_2017_06_10_pus_uvs.log on Mon May 6 14:47:06 2019 obs J0735+2341_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0735+2341_S_2017_06_10_pus_uva.fits ! AN table 1: 218 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.985321 visibilities/baseline/integration-bin. ! Found source: J0735+2341 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 38664 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0735+2341_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1171 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.952117Jy sigma=0.009393 ! Fit after self-cal, rms=0.917559Jy sigma=0.009045 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.849 mas, bmaj=6.097 mas, bpa=-1.36 degrees ! Estimated noise=706.667 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0595041 Jy ! Component: 100 - total flux cleaned = 0.087264 Jy ! Total flux subtracted in 100 components = 0.087264 Jy ! Clean residual min=-0.012391 max=0.017843 Jy/beam ! Clean residual mean=0.000013 rms=0.003909 Jy/beam ! Combined flux in latest and established models = 0.087264 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.087264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130960Jy sigma=0.001283 ! Fit after self-cal, rms=0.130700Jy sigma=0.001280 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.443 mas, bmaj=6.916 mas, bpa=-1.515 degrees ! Estimated noise=413.619 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0353363 Jy ! Component: 100 - total flux cleaned = 0.0583181 Jy ! Component: 150 - total flux cleaned = 0.0739135 Jy ! Component: 200 - total flux cleaned = 0.0845414 Jy ! Total flux subtracted in 200 components = 0.0845414 Jy ! Clean residual min=-0.013354 max=0.021749 Jy/beam ! Clean residual mean=0.000000 rms=0.004681 Jy/beam ! Combined flux in latest and established models = 0.171806 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 79 components and 0.171806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119750Jy sigma=0.001164 ! Fit after self-cal, rms=0.119280Jy sigma=0.001158 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.94 HN 1.77 KP 0.66 ! LA 0.77 MK 1.47 NL 0.98 OV 1.04 ! PT 0.78 SC 1.25 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.57 HN 1.15 KP 0.62 ! LA 0.67 MK 1.32 NL 1.49 OV 1.49 ! PT 0.94 SC 1.32 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.58 HN 1.22 KP 0.59 ! LA 0.69 MK 1.47 NL 1.23 OV 1.10 ! PT 0.90 SC 1.34 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.13 HN 1.90 KP 1.00* ! LA 0.55 MK 1.40 NL 1.00* OV 1.00* ! PT 1.36 SC 1.00* ! ! ! Fit before self-cal, rms=0.119280Jy sigma=0.001158 ! Fit after self-cal, rms=0.152696Jy sigma=0.001045 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.855 mas, bmaj=7.588 mas, bpa=-0.7261 degrees ! Estimated noise=459.261 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000286457 Jy ! Component: 100 - total flux cleaned = -0.000178564 Jy ! Component: 150 - total flux cleaned = 8.13419e-06 Jy ! Component: 200 - total flux cleaned = 9.01997e-05 Jy ! Total flux subtracted in 200 components = 9.01997e-05 Jy ! Clean residual min=-0.012778 max=0.016231 Jy/beam ! Clean residual mean=-0.000016 rms=0.004241 Jy/beam ! Combined flux in latest and established models = 0.171896 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 85 components and 0.171896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152495Jy sigma=0.001044 ! Fit after self-cal, rms=0.155029Jy sigma=0.001033 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155029Jy sigma=0.001033 ! Fit after self-cal, rms=0.243422Jy sigma=0.000975 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.78 mas, bmaj=7.47 mas, bpa=-0.2005 degrees ! Estimated noise=464.878 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371533 Jy ! Component: 100 - total flux cleaned = 0.00378695 Jy ! Component: 150 - total flux cleaned = 0.00383596 Jy ! Component: 200 - total flux cleaned = 0.00383433 Jy ! Total flux subtracted in 200 components = 0.00383433 Jy ! Clean residual min=-0.010091 max=0.016924 Jy/beam ! Clean residual mean=0.000008 rms=0.003630 Jy/beam ! Combined flux in latest and established models = 0.17573 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 94 components and 0.17573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243139Jy sigma=0.000975 ! Fit after self-cal, rms=0.244787Jy sigma=0.000972 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.5, 73). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156534 Jy ! Component: 100 - total flux cleaned = 0.0189551 Jy ! Component: 150 - total flux cleaned = 0.0212643 Jy ! Component: 200 - total flux cleaned = 0.0231178 Jy ! Total flux subtracted in 200 components = 0.0231178 Jy ! Clean residual min=-0.009823 max=0.013379 Jy/beam ! Clean residual mean=-0.000000 rms=0.003396 Jy/beam ! Combined flux in latest and established models = 0.198848 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 135 components and 0.198848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243429Jy sigma=0.000954 ! Fit after self-cal, rms=0.243025Jy sigma=0.000950 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243025Jy sigma=0.000950 ! Fit after self-cal, rms=0.259634Jy sigma=0.000941 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.768 mas, bmaj=7.568 mas, bpa=-0.8715 degrees ! Estimated noise=459.687 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00827229 Jy ! Component: 100 - total flux cleaned = 0.010699 Jy ! Component: 150 - total flux cleaned = 0.0108541 Jy ! Component: 200 - total flux cleaned = 0.010852 Jy ! Total flux subtracted in 200 components = 0.010852 Jy ! Clean residual min=-0.010512 max=0.012473 Jy/beam ! Clean residual mean=0.000005 rms=0.003247 Jy/beam ! Combined flux in latest and established models = 0.2097 Jy selfcal ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 163 components and 0.2097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.259200Jy sigma=0.000936 ! Fit after self-cal, rms=0.259124Jy sigma=0.000934 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234975 Jy ! Component: 100 - total flux cleaned = 0.00235597 Jy ! Component: 150 - total flux cleaned = 0.00248175 Jy ! Component: 200 - total flux cleaned = 0.00259425 Jy ! Total flux subtracted in 200 components = 0.00259425 Jy ! Clean residual min=-0.010551 max=0.012287 Jy/beam ! Clean residual mean=0.000004 rms=0.003244 Jy/beam ! Combined flux in latest and established models = 0.212294 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 175 components and 0.212294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.258915Jy sigma=0.000933 ! Fit after self-cal, rms=0.258878Jy sigma=0.000933 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.258878Jy sigma=0.000933 ! Fit after self-cal, rms=0.271708Jy sigma=0.000930 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.457 mas, bmaj=11.53 mas, bpa=-9.507 degrees ! Estimated noise=488.198 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00394795 Jy ! Component: 100 - total flux cleaned = 0.00472939 Jy ! Component: 150 - total flux cleaned = 0.00473702 Jy ! Component: 200 - total flux cleaned = 0.00495316 Jy ! Total flux subtracted in 200 components = 0.00495316 Jy ! Clean residual min=-0.015870 max=0.016929 Jy/beam ! Clean residual mean=0.000009 rms=0.004731 Jy/beam ! Combined flux in latest and established models = 0.217247 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 198 components and 0.217247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271597Jy sigma=0.000928 ! Fit after self-cal, rms=0.271628Jy sigma=0.000928 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111297 Jy ! Component: 100 - total flux cleaned = 0.00142358 Jy ! Component: 150 - total flux cleaned = 0.00161753 Jy ! Component: 200 - total flux cleaned = 0.00189559 Jy ! Total flux subtracted in 200 components = 0.00189559 Jy ! Clean residual min=-0.015820 max=0.016834 Jy/beam ! Clean residual mean=0.000010 rms=0.004740 Jy/beam ! Combined flux in latest and established models = 0.219143 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 202 components and 0.219143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271566Jy sigma=0.000927 ! Fit after self-cal, rms=0.271543Jy sigma=0.000927 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=7.691 mas, bpa=-1.306 degrees ! Estimated noise=461.311 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.806 x 7.691 at -1.306 degrees (North through East) ! Clean map min=-0.010803 max=0.081456 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.059 mas, bmaj=6.648 mas, bpa=-1.633 degrees ! Estimated noise=858.601 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0660285 Jy ! Component: 100 - total flux cleaned = 0.0980493 Jy ! Component: 150 - total flux cleaned = 0.12097 Jy ! Component: 200 - total flux cleaned = 0.137204 Jy ! Total flux subtracted in 200 components = 0.137204 Jy ! Clean residual min=-0.013471 max=0.014525 Jy/beam ! Clean residual mean=0.000005 rms=0.003812 Jy/beam ! Combined flux in latest and established models = 0.137204 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 59 model components to the UV plane model. ! The established model now contains 59 components and 0.137204 Jy ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=7.691 mas, bpa=-1.306 degrees ! Estimated noise=461.311 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210588 Jy ! Component: 100 - total flux cleaned = 0.0360781 Jy ! Component: 150 - total flux cleaned = 0.0460574 Jy ! Component: 200 - total flux cleaned = 0.0518075 Jy ! Total flux subtracted in 200 components = 0.0518075 Jy ! Clean residual min=-0.010667 max=0.013534 Jy/beam ! Clean residual mean=0.000003 rms=0.003460 Jy/beam ! Combined flux in latest and established models = 0.189011 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 100 components and 0.189011 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.457 mas, bmaj=11.53 mas, bpa=-9.507 degrees ! Estimated noise=488.198 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00971205 Jy ! Component: 100 - total flux cleaned = 0.0152953 Jy ! Component: 150 - total flux cleaned = 0.0192401 Jy ! Component: 200 - total flux cleaned = 0.0223624 Jy ! Total flux subtracted in 200 components = 0.0223624 Jy ! Clean residual min=-0.015080 max=0.017480 Jy/beam ! Clean residual mean=0.000006 rms=0.004794 Jy/beam ! Combined flux in latest and established models = 0.211374 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199642 Jy ! Component: 100 - total flux cleaned = 0.00293513 Jy ! Component: 150 - total flux cleaned = 0.00378578 Jy ! Component: 200 - total flux cleaned = 0.00455677 Jy ! Total flux subtracted in 200 components = 0.00455677 Jy ! Clean residual min=-0.015424 max=0.016761 Jy/beam ! Clean residual mean=0.000008 rms=0.004749 Jy/beam ! Combined flux in latest and established models = 0.21593 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 139 components and 0.21593 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=7.691 mas, bpa=-1.306 degrees ! Estimated noise=461.311 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106389 Jy ! Component: 100 - total flux cleaned = 0.00106371 Jy ! Component: 150 - total flux cleaned = 0.00106198 Jy ! Component: 200 - total flux cleaned = 0.00106567 Jy ! Total flux subtracted in 200 components = 0.00106567 Jy ! Clean residual min=-0.010537 max=0.011493 Jy/beam ! Clean residual mean=0.000007 rms=0.003227 Jy/beam ! Combined flux in latest and established models = 0.216996 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 151 components and 0.216996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271614Jy sigma=0.000930 ! Fit after self-cal, rms=0.271451Jy sigma=0.000929 wmodel J0735+2341_S_2017_06_10_pus_map.mod ! Writing 151 model components to file: J0735+2341_S_2017_06_10_pus_map.mod wobs J0735+2341_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0735+2341_S_2017_06_10_pus_uvs.fits wwins J0735+2341_S_2017_06_10_pus_map.win ! wwins: Wrote 2 windows to J0735+2341_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00467583 Jy ! Component: 100 - total flux cleaned = 0.00902775 Jy ! Component: 150 - total flux cleaned = 0.0133775 Jy ! Component: 200 - total flux cleaned = 0.0175709 Jy ! Component: 250 - total flux cleaned = 0.0210947 Jy ! Component: 300 - total flux cleaned = 0.0241718 Jy ! Component: 350 - total flux cleaned = 0.0270022 Jy ! Component: 400 - total flux cleaned = 0.0297651 Jy ! Component: 450 - total flux cleaned = 0.0327868 Jy ! Component: 500 - total flux cleaned = 0.0352808 Jy ! Component: 550 - total flux cleaned = 0.0372686 Jy ! Component: 600 - total flux cleaned = 0.0395235 Jy ! Component: 650 - total flux cleaned = 0.0417358 Jy ! Component: 700 - total flux cleaned = 0.0436204 Jy ! Component: 750 - total flux cleaned = 0.0451898 Jy ! Component: 800 - total flux cleaned = 0.0470156 Jy ! Component: 850 - total flux cleaned = 0.0488132 Jy ! Component: 900 - total flux cleaned = 0.0508564 Jy ! Component: 950 - total flux cleaned = 0.0524665 Jy ! Component: 1000 - total flux cleaned = 0.0541884 Jy ! Component: 1050 - total flux cleaned = 0.0558837 Jy ! Component: 1100 - total flux cleaned = 0.0576828 Jy ! Component: 1150 - total flux cleaned = 0.0590782 Jy ! Component: 1200 - total flux cleaned = 0.0607072 Jy ! Component: 1250 - total flux cleaned = 0.0623104 Jy ! Component: 1300 - total flux cleaned = 0.0636494 Jy ! Component: 1350 - total flux cleaned = 0.064854 Jy ! Component: 1400 - total flux cleaned = 0.0662786 Jy ! Component: 1450 - total flux cleaned = 0.0674513 Jy ! Component: 1500 - total flux cleaned = 0.0686106 Jy ! Component: 1550 - total flux cleaned = 0.0698704 Jy ! Component: 1600 - total flux cleaned = 0.0713404 Jy ! Component: 1650 - total flux cleaned = 0.0723455 Jy ! Component: 1700 - total flux cleaned = 0.0735604 Jy ! Component: 1750 - total flux cleaned = 0.0748715 Jy ! Component: 1800 - total flux cleaned = 0.0760589 Jy ! Component: 1850 - total flux cleaned = 0.0769127 Jy ! Component: 1900 - total flux cleaned = 0.0778651 Jy ! Component: 1950 - total flux cleaned = 0.0792239 Jy ! Component: 2000 - total flux cleaned = 0.08036 Jy ! Component: 2050 - total flux cleaned = 0.0812812 Jy ! Component: 2100 - total flux cleaned = 0.0821928 Jy ! Component: 2150 - total flux cleaned = 0.0829948 Jy ! Component: 2200 - total flux cleaned = 0.0837906 Jy ! Component: 2250 - total flux cleaned = 0.0848735 Jy ! Component: 2300 - total flux cleaned = 0.0858481 Jy ! Component: 2350 - total flux cleaned = 0.0865239 Jy ! Component: 2400 - total flux cleaned = 0.0872878 Jy ! Component: 2450 - total flux cleaned = 0.0880467 Jy ! Component: 2500 - total flux cleaned = 0.088518 Jy ! Component: 2550 - total flux cleaned = 0.0895437 Jy ! Component: 2600 - total flux cleaned = 0.0901909 Jy ! Component: 2650 - total flux cleaned = 0.0909242 Jy ! Component: 2700 - total flux cleaned = 0.0915619 Jy ! Component: 2750 - total flux cleaned = 0.0922845 Jy ! Component: 2800 - total flux cleaned = 0.0930009 Jy ! Component: 2850 - total flux cleaned = 0.0935342 Jy ! Component: 2900 - total flux cleaned = 0.094414 Jy ! Component: 2950 - total flux cleaned = 0.094852 Jy ! Component: 3000 - total flux cleaned = 0.0956326 Jy ! Component: 3050 - total flux cleaned = 0.0962352 Jy ! Component: 3100 - total flux cleaned = 0.0968331 Jy ! Component: 3150 - total flux cleaned = 0.0976798 Jy ! Component: 3200 - total flux cleaned = 0.0981845 Jy ! Component: 3250 - total flux cleaned = 0.0987689 Jy ! Component: 3300 - total flux cleaned = 0.0992664 Jy ! Component: 3350 - total flux cleaned = 0.100008 Jy ! Component: 3400 - total flux cleaned = 0.100825 Jy ! Component: 3450 - total flux cleaned = 0.10123 Jy ! Component: 3500 - total flux cleaned = 0.102196 Jy ! Component: 3550 - total flux cleaned = 0.102516 Jy ! Component: 3600 - total flux cleaned = 0.103072 Jy ! Component: 3650 - total flux cleaned = 0.103625 Jy ! Component: 3700 - total flux cleaned = 0.104408 Jy ! Component: 3750 - total flux cleaned = 0.10503 Jy ! Component: 3800 - total flux cleaned = 0.105416 Jy ! Component: 3850 - total flux cleaned = 0.1058 Jy ! Component: 3900 - total flux cleaned = 0.106181 Jy ! Component: 3950 - total flux cleaned = 0.106635 Jy ! Component: 4000 - total flux cleaned = 0.107312 Jy ! Component: 4050 - total flux cleaned = 0.107536 Jy ! Total flux subtracted in 4096 components = 0.108131 Jy ! Clean residual min=-0.004159 max=0.005287 Jy/beam ! Clean residual mean=-0.000013 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 0.325127 Jy keep ! Adding 400 model components to the UV plane model. ! The established model now contains 551 components and 0.325127 Jy ![Exited script file: muppet] wmap "J0735+2341_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.806 x 7.691 at -1.306 degrees (North through East) ! Clean map min=-0.0073892 max=0.080658 Jy/beam ! Writing clean map to FITS file: J0735+2341_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0806576 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00154935 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.76268 5.76268 11.5254 23.0507 46.1015 92.2029 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0046 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.08 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.806 x 7.691 at -1.306 degrees (North through East) ! Clean map min=-0.0073892 max=0.080658 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0735+2341_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:47:13 2019