! Started logfile: J0735+0130_S_2017_02_24_pus_uvs.log on Sat May 4 11:21:31 2019 obs J0735+0130_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J0735+0130_S_2017_02_24_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.847788 visibilities/baseline/integration-bin. ! Found source: J0735+0130 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 17244 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0735+0130_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 434 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.980344Jy sigma=0.008049 ! Fit after self-cal, rms=0.944785Jy sigma=0.007797 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=6.821 mas, bpa=1.42 degrees ! Estimated noise=1024.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.045403 Jy ! Component: 100 - total flux cleaned = 0.0555458 Jy ! Total flux subtracted in 100 components = 0.0555458 Jy ! Clean residual min=-0.003858 max=0.005189 Jy/beam ! Clean residual mean=0.000009 rms=0.001006 Jy/beam ! Combined flux in latest and established models = 0.0555458 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0555458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095957Jy sigma=0.000693 ! Fit after self-cal, rms=0.095425Jy sigma=0.000690 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=7.982 mas, bpa=1.222 degrees ! Estimated noise=717.139 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0052953 Jy ! Component: 100 - total flux cleaned = 0.00724701 Jy ! Component: 150 - total flux cleaned = 0.00816244 Jy ! Component: 200 - total flux cleaned = 0.00850099 Jy ! Total flux subtracted in 200 components = 0.00850099 Jy ! Clean residual min=-0.002381 max=0.002765 Jy/beam ! Clean residual mean=0.000013 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.0640468 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 28 components and 0.0640468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095086Jy sigma=0.000687 ! Fit after self-cal, rms=0.095073Jy sigma=0.000687 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.06 KP 1.01 ! LA 0.97 MK 1.05 NL 1.07 OV 1.08 ! PT 1.13 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.95 HN 1.04 KP 1.17 ! LA 0.96 MK 1.08 NL 0.99 OV 1.10 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.02 KP 1.00 ! LA 1.00 MK 1.07 NL 0.99 OV 0.90 ! PT 1.09 SC 1.02 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.99 HN 0.74 KP 1.00* ! LA 0.98 MK 0.87 NL 1.00* OV 0.77 ! PT 0.92 SC 1.00* ! ! ! Fit before self-cal, rms=0.095073Jy sigma=0.000687 ! Fit after self-cal, rms=0.089279Jy sigma=0.000684 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.621 mas, bmaj=7.985 mas, bpa=1.36 degrees ! Estimated noise=716.033 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192573 Jy ! Component: 100 - total flux cleaned = 0.00222595 Jy ! Component: 150 - total flux cleaned = 0.00237621 Jy ! Component: 200 - total flux cleaned = 0.00245191 Jy ! Total flux subtracted in 200 components = 0.00245191 Jy ! Clean residual min=-0.002197 max=0.002604 Jy/beam ! Clean residual mean=0.000012 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.0664987 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 48 components and 0.0664987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089232Jy sigma=0.000684 ! Fit after self-cal, rms=0.089225Jy sigma=0.000683 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089225Jy sigma=0.000683 ! Fit after self-cal, rms=0.089088Jy sigma=0.000678 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.617 mas, bmaj=7.969 mas, bpa=1.788 degrees ! Estimated noise=725.667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161636 Jy ! Component: 100 - total flux cleaned = 0.00215195 Jy ! Component: 150 - total flux cleaned = 0.00225333 Jy ! Component: 200 - total flux cleaned = 0.00225357 Jy ! Total flux subtracted in 200 components = 0.00225357 Jy ! Clean residual min=-0.002037 max=0.002011 Jy/beam ! Clean residual mean=0.000006 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.0687522 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 60 components and 0.0687523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089059Jy sigma=0.000678 ! Fit after self-cal, rms=0.089179Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239957 Jy ! Component: 100 - total flux cleaned = 0.000175793 Jy ! Component: 150 - total flux cleaned = 0.000156225 Jy ! Component: 200 - total flux cleaned = 0.00015629 Jy ! Total flux subtracted in 200 components = 0.00015629 Jy ! Clean residual min=-0.002248 max=0.002107 Jy/beam ! Clean residual mean=0.000007 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.0689085 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 72 components and 0.0689085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089171Jy sigma=0.000677 ! Fit after self-cal, rms=0.089171Jy sigma=0.000677 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089171Jy sigma=0.000677 ! Fit after self-cal, rms=0.090508Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.597 mas, bmaj=7.956 mas, bpa=1.702 degrees ! Estimated noise=723.657 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000672158 Jy ! Component: 100 - total flux cleaned = 0.000844551 Jy ! Component: 150 - total flux cleaned = 0.000880825 Jy ! Component: 200 - total flux cleaned = 0.000929068 Jy ! Total flux subtracted in 200 components = 0.000929068 Jy ! Clean residual min=-0.001698 max=0.001970 Jy/beam ! Clean residual mean=0.000005 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.0698376 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 79 components and 0.0698376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090498Jy sigma=0.000675 ! Fit after self-cal, rms=0.090751Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000102178 Jy ! Component: 100 - total flux cleaned = 0.000100814 Jy ! Component: 150 - total flux cleaned = 6.9409e-05 Jy ! Component: 200 - total flux cleaned = 6.91056e-05 Jy ! Total flux subtracted in 200 components = 6.91056e-05 Jy ! Clean residual min=-0.001880 max=0.001897 Jy/beam ! Clean residual mean=0.000005 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0699067 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 89 components and 0.0699067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090744Jy sigma=0.000674 ! Fit after self-cal, rms=0.090743Jy sigma=0.000674 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090743Jy sigma=0.000674 ! Fit after self-cal, rms=0.092220Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.361 mas, bmaj=11.51 mas, bpa=-0.4682 degrees ! Estimated noise=892.287 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116795 Jy ! Component: 100 - total flux cleaned = 6.7343e-05 Jy ! Component: 150 - total flux cleaned = 8.07659e-05 Jy ! Component: 200 - total flux cleaned = 0.000104185 Jy ! Total flux subtracted in 200 components = 0.000104185 Jy ! Clean residual min=-0.001810 max=0.002077 Jy/beam ! Clean residual mean=0.000009 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.0700109 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 99 components and 0.0700109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092217Jy sigma=0.000674 ! Fit after self-cal, rms=0.092366Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.56043e-05 Jy ! Component: 100 - total flux cleaned = -8.95378e-05 Jy ! Component: 150 - total flux cleaned = -0.00010903 Jy ! Component: 200 - total flux cleaned = -0.000117938 Jy ! Total flux subtracted in 200 components = -0.000117938 Jy ! Clean residual min=-0.001793 max=0.002077 Jy/beam ! Clean residual mean=0.000008 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.069893 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 110 components and 0.069893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092364Jy sigma=0.000674 ! Fit after self-cal, rms=0.092363Jy sigma=0.000674 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.588 mas, bmaj=7.949 mas, bpa=1.681 degrees ! Estimated noise=725.06 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.588 x 7.949 at 1.681 degrees (North through East) ! Clean map min=-0.0016222 max=0.058861 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=6.836 mas, bpa=1.342 degrees ! Estimated noise=1004.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0449928 Jy ! Component: 100 - total flux cleaned = 0.0567877 Jy ! Component: 150 - total flux cleaned = 0.0626898 Jy ! Component: 200 - total flux cleaned = 0.0647868 Jy ! Total flux subtracted in 200 components = 0.0647868 Jy ! Clean residual min=-0.002718 max=0.003082 Jy/beam ! Clean residual mean=0.000004 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.0647868 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0647868 Jy ! Inverting map and beam ! Estimated beam: bmin=3.588 mas, bmaj=7.949 mas, bpa=1.681 degrees ! Estimated noise=725.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00294235 Jy ! Component: 100 - total flux cleaned = 0.00418005 Jy ! Component: 150 - total flux cleaned = 0.00449819 Jy ! Component: 200 - total flux cleaned = 0.00475806 Jy ! Total flux subtracted in 200 components = 0.00475806 Jy ! Clean residual min=-0.001838 max=0.001924 Jy/beam ! Clean residual mean=0.000005 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.0695449 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 46 components and 0.0695449 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.361 mas, bmaj=11.51 mas, bpa=-0.4682 degrees ! Estimated noise=892.287 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000170249 Jy ! Component: 100 - total flux cleaned = -1.8263e-05 Jy ! Component: 150 - total flux cleaned = 0.000119191 Jy ! Component: 200 - total flux cleaned = 0.000222324 Jy ! Total flux subtracted in 200 components = 0.000222324 Jy ! Clean residual min=-0.001795 max=0.002093 Jy/beam ! Clean residual mean=0.000008 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.0697672 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.15238e-05 Jy ! Component: 100 - total flux cleaned = 4.19537e-05 Jy ! Component: 150 - total flux cleaned = 5.30635e-05 Jy ! Component: 200 - total flux cleaned = 5.3198e-05 Jy ! Total flux subtracted in 200 components = 5.3198e-05 Jy ! Clean residual min=-0.001779 max=0.002109 Jy/beam ! Clean residual mean=0.000008 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.0698204 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 81 components and 0.0698204 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.588 mas, bmaj=7.949 mas, bpa=1.681 degrees ! Estimated noise=725.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.2327e-05 Jy ! Component: 100 - total flux cleaned = -1.0599e-05 Jy ! Component: 150 - total flux cleaned = -1.00076e-05 Jy ! Component: 200 - total flux cleaned = -1.01969e-05 Jy ! Total flux subtracted in 200 components = -1.01969e-05 Jy ! Clean residual min=-0.001790 max=0.001904 Jy/beam ! Clean residual mean=0.000004 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.0698102 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 95 components and 0.0698102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092371Jy sigma=0.000674 ! Fit after self-cal, rms=0.092375Jy sigma=0.000674 wmodel J0735+0130_S_2017_02_24_pus_map.mod ! Writing 95 model components to file: J0735+0130_S_2017_02_24_pus_map.mod wobs J0735+0130_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J0735+0130_S_2017_02_24_pus_uvs.fits wwins J0735+0130_S_2017_02_24_pus_map.win ! wwins: Wrote 2 windows to J0735+0130_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000816324 Jy ! Component: 100 - total flux cleaned = 0.00100933 Jy ! Component: 150 - total flux cleaned = 0.000980228 Jy ! Component: 200 - total flux cleaned = 0.00100965 Jy ! Component: 250 - total flux cleaned = 0.00112189 Jy ! Component: 300 - total flux cleaned = 0.00120312 Jy ! Component: 350 - total flux cleaned = 0.00136151 Jy ! Component: 400 - total flux cleaned = 0.00146409 Jy ! Component: 450 - total flux cleaned = 0.00161533 Jy ! Component: 500 - total flux cleaned = 0.00176315 Jy ! Component: 550 - total flux cleaned = 0.00181148 Jy ! Component: 600 - total flux cleaned = 0.00197912 Jy ! Component: 650 - total flux cleaned = 0.00209614 Jy ! Component: 700 - total flux cleaned = 0.00218852 Jy ! Component: 750 - total flux cleaned = 0.00230192 Jy ! Component: 800 - total flux cleaned = 0.0023465 Jy ! Component: 850 - total flux cleaned = 0.00239071 Jy ! Component: 900 - total flux cleaned = 0.00243388 Jy ! Component: 950 - total flux cleaned = 0.00241257 Jy ! Component: 1000 - total flux cleaned = 0.0024338 Jy ! Component: 1050 - total flux cleaned = 0.00247549 Jy ! Component: 1100 - total flux cleaned = 0.00251679 Jy ! Component: 1150 - total flux cleaned = 0.00259771 Jy ! Component: 1200 - total flux cleaned = 0.0026374 Jy ! Component: 1250 - total flux cleaned = 0.0026768 Jy ! Component: 1300 - total flux cleaned = 0.00269608 Jy ! Component: 1350 - total flux cleaned = 0.00279246 Jy ! Component: 1400 - total flux cleaned = 0.00281158 Jy ! Component: 1450 - total flux cleaned = 0.00294317 Jy ! Component: 1500 - total flux cleaned = 0.00292451 Jy ! Component: 1550 - total flux cleaned = 0.00310934 Jy ! Component: 1600 - total flux cleaned = 0.00320085 Jy ! Component: 1650 - total flux cleaned = 0.0032911 Jy ! Component: 1700 - total flux cleaned = 0.00341632 Jy ! Component: 1750 - total flux cleaned = 0.00355831 Jy ! Component: 1800 - total flux cleaned = 0.00368108 Jy ! Component: 1850 - total flux cleaned = 0.00375062 Jy ! Component: 1900 - total flux cleaned = 0.003854 Jy ! Component: 1950 - total flux cleaned = 0.00397334 Jy ! Component: 2000 - total flux cleaned = 0.00405795 Jy ! Component: 2050 - total flux cleaned = 0.0041753 Jy ! Component: 2100 - total flux cleaned = 0.00417516 Jy ! Component: 2150 - total flux cleaned = 0.00422457 Jy ! Component: 2200 - total flux cleaned = 0.00438779 Jy ! Component: 2250 - total flux cleaned = 0.00450079 Jy ! Component: 2300 - total flux cleaned = 0.0045968 Jy ! Component: 2350 - total flux cleaned = 0.00470789 Jy ! Component: 2400 - total flux cleaned = 0.00481777 Jy ! Component: 2450 - total flux cleaned = 0.00495826 Jy ! Component: 2500 - total flux cleaned = 0.00500485 Jy ! Component: 2550 - total flux cleaned = 0.00512764 Jy ! Component: 2600 - total flux cleaned = 0.00511238 Jy ! Component: 2650 - total flux cleaned = 0.00524832 Jy ! Component: 2700 - total flux cleaned = 0.00529319 Jy ! Component: 2750 - total flux cleaned = 0.00535284 Jy ! Component: 2800 - total flux cleaned = 0.00539709 Jy ! Component: 2850 - total flux cleaned = 0.00549931 Jy ! Component: 2900 - total flux cleaned = 0.00552805 Jy ! Component: 2950 - total flux cleaned = 0.0055998 Jy ! Component: 3000 - total flux cleaned = 0.0056425 Jy ! Component: 3050 - total flux cleaned = 0.00576981 Jy ! Component: 3100 - total flux cleaned = 0.00572769 Jy ! Component: 3150 - total flux cleaned = 0.00582526 Jy ! Component: 3200 - total flux cleaned = 0.00586668 Jy ! Component: 3250 - total flux cleaned = 0.00589414 Jy ! Component: 3300 - total flux cleaned = 0.0059488 Jy ! Component: 3350 - total flux cleaned = 0.00600291 Jy ! Component: 3400 - total flux cleaned = 0.00604341 Jy ! Component: 3450 - total flux cleaned = 0.00606996 Jy ! Component: 3500 - total flux cleaned = 0.00608331 Jy ! Component: 3550 - total flux cleaned = 0.00616241 Jy ! Component: 3600 - total flux cleaned = 0.00613624 Jy ! Component: 3650 - total flux cleaned = 0.00617517 Jy ! Component: 3700 - total flux cleaned = 0.0061751 Jy ! Component: 3750 - total flux cleaned = 0.00613657 Jy ! Component: 3800 - total flux cleaned = 0.00618746 Jy ! Component: 3850 - total flux cleaned = 0.00621284 Jy ! Component: 3900 - total flux cleaned = 0.0062379 Jy ! Component: 3950 - total flux cleaned = 0.00626269 Jy ! Component: 4000 - total flux cleaned = 0.00623788 Jy ! Component: 4050 - total flux cleaned = 0.00621318 Jy ! Total flux subtracted in 4096 components = 0.00627449 Jy ! Clean residual min=-0.000654 max=0.000773 Jy/beam ! Clean residual mean=0.000002 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.0760847 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 396 components and 0.0760847 Jy ![Exited script file: muppet] wmap "J0735+0130_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.588 x 7.949 at 1.681 degrees (North through East) ! Clean map min=-0.0015294 max=0.058848 Jy/beam ! Writing clean map to FITS file: J0735+0130_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0588482 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000228876 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.16678 1.16678 2.33356 4.66712 9.33424 18.6685 37.3369 74.6739 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.588 x 7.949 at 1.681 degrees (North through East) ! Clean map min=-0.0015294 max=0.058848 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0735+0130_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:21:36 2019