! Started logfile: J0732+0150_X_2017_02_24_pus_uvs.log on Sat May 4 09:59:21 2019 obs J0732+0150_X_2017_02_24_pus_uva.fits ! Reading UV FITS file: J0732+0150_X_2017_02_24_pus_uva.fits ! AN table 1: 111 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.736937 visibilities/baseline/integration-bin. ! Found source: J0732+0150 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1882 lines of history. ! ! Reading 44172 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0732+0150_X_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.864561Jy sigma=0.007134 ! Fit after self-cal, rms=0.859292Jy sigma=0.007093 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7642 mas, bmaj=1.791 mas, bpa=5.114 degrees ! Estimated noise=660.323 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106888 Jy ! Component: 100 - total flux cleaned = 0.143179 Jy ! Total flux subtracted in 100 components = 0.143179 Jy ! Clean residual min=-0.006112 max=0.015988 Jy/beam ! Clean residual mean=-0.000019 rms=0.001801 Jy/beam ! Combined flux in latest and established models = 0.143179 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.143179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090136Jy sigma=0.000714 ! Fit after self-cal, rms=0.089778Jy sigma=0.000711 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190624 Jy ! Component: 100 - total flux cleaned = 0.0285401 Jy ! Total flux subtracted in 100 components = 0.0285401 Jy ! Clean residual min=-0.004505 max=0.006553 Jy/beam ! Clean residual mean=0.000000 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.17172 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 14 components and 0.17172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084888Jy sigma=0.000665 ! Fit after self-cal, rms=0.084783Jy sigma=0.000664 ! Inverting map ! Added new window around map position (-0.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00658877 Jy ! Component: 100 - total flux cleaned = 0.0105425 Jy ! Total flux subtracted in 100 components = 0.0105425 Jy ! Clean residual min=-0.003526 max=0.004720 Jy/beam ! Clean residual mean=0.000008 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.182262 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 0.182262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084150Jy sigma=0.000658 ! Fit after self-cal, rms=0.084112Jy sigma=0.000657 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9801 mas, bmaj=2.086 mas, bpa=2.805 degrees ! Estimated noise=410.686 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.4, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00581115 Jy ! Component: 100 - total flux cleaned = 0.00903637 Jy ! Component: 150 - total flux cleaned = 0.0111904 Jy ! Component: 200 - total flux cleaned = 0.0122438 Jy ! Total flux subtracted in 200 components = 0.0122438 Jy ! Clean residual min=-0.002437 max=0.002547 Jy/beam ! Clean residual mean=0.000018 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.194506 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 51 components and 0.194506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083702Jy sigma=0.000653 ! Fit after self-cal, rms=0.083644Jy sigma=0.000653 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.99 KP 1.02 ! LA 1.01 MK 0.99 NL 0.98 OV 0.97 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.08 HN 1.01 KP 1.03 ! LA 1.01 MK 1.01 NL 1.03 OV 0.99 ! PT 1.04 SC 1.03 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.02 KP 1.01 ! LA 1.01 MK 1.06 NL 0.99 OV 0.98 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.00 KP 1.03 ! LA 1.00 MK 1.04 NL 0.99 OV 0.97 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.98 KP 1.02 ! LA 1.00 MK 0.99 NL 0.97 OV 0.97 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 1.02 KP 1.00 ! LA 1.03 MK 1.00 NL 0.97 OV 0.98 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.95 KP 1.04 ! LA 0.98 MK 0.96 NL 0.99 OV 0.99 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 0.99 KP 1.02 ! LA 1.03 MK 0.92 NL 1.01 OV 0.98 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 1.00 KP 1.01 ! LA 0.99 MK 1.02 NL 0.96 OV 0.97 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.02 KP 1.01 ! LA 0.98 MK 0.99 NL 0.95 OV 0.98 ! PT 0.97 SC 0.96 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.98 KP 1.01 ! LA 1.00 MK 0.92 NL 0.98 OV 0.97 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.25 KP 1.04 ! LA 1.00 MK 0.93 NL 0.98 OV 1.00 ! PT 0.96 SC 1.02 ! ! ! Fit before self-cal, rms=0.083644Jy sigma=0.000653 ! Fit after self-cal, rms=0.083341Jy sigma=0.000651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9811 mas, bmaj=2.083 mas, bpa=2.557 degrees ! Estimated noise=408.766 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228837 Jy ! Component: 100 - total flux cleaned = 0.00294608 Jy ! Component: 150 - total flux cleaned = 0.00318763 Jy ! Component: 200 - total flux cleaned = 0.00339787 Jy ! Total flux subtracted in 200 components = 0.00339787 Jy ! Clean residual min=-0.001482 max=0.001928 Jy/beam ! Clean residual mean=0.000010 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.197904 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 68 components and 0.197904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083260Jy sigma=0.000650 ! Fit after self-cal, rms=0.083261Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083261Jy sigma=0.000650 ! Fit after self-cal, rms=0.084723Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9788 mas, bmaj=2.08 mas, bpa=2.387 degrees ! Estimated noise=408.805 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121418 Jy ! Component: 100 - total flux cleaned = 0.00151384 Jy ! Component: 150 - total flux cleaned = 0.00165967 Jy ! Component: 200 - total flux cleaned = 0.0018208 Jy ! Total flux subtracted in 200 components = 0.0018208 Jy ! Clean residual min=-0.001392 max=0.001707 Jy/beam ! Clean residual mean=0.000006 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.199725 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 85 components and 0.199725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084683Jy sigma=0.000648 ! Fit after self-cal, rms=0.084704Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.2, -8.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169825 Jy ! Component: 100 - total flux cleaned = 0.00251682 Jy ! Component: 150 - total flux cleaned = 0.00316963 Jy ! Component: 200 - total flux cleaned = 0.00357861 Jy ! Total flux subtracted in 200 components = 0.00357861 Jy ! Clean residual min=-0.001189 max=0.001269 Jy/beam ! Clean residual mean=0.000003 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.203303 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 103 components and 0.203303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084664Jy sigma=0.000647 ! Fit after self-cal, rms=0.084657Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084657Jy sigma=0.000647 ! Fit after self-cal, rms=0.085159Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9773 mas, bmaj=2.078 mas, bpa=2.229 degrees ! Estimated noise=408.199 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000590705 Jy ! Component: 100 - total flux cleaned = 0.000926072 Jy ! Component: 150 - total flux cleaned = 0.00115956 Jy ! Component: 200 - total flux cleaned = 0.00136614 Jy ! Total flux subtracted in 200 components = 0.00136614 Jy ! Clean residual min=-0.001176 max=0.001156 Jy/beam ! Clean residual mean=0.000002 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.204669 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 112 components and 0.204669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085141Jy sigma=0.000647 ! Fit after self-cal, rms=0.085142Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213874 Jy ! Component: 100 - total flux cleaned = 0.000399215 Jy ! Component: 150 - total flux cleaned = 0.0005829 Jy ! Component: 200 - total flux cleaned = 0.000731648 Jy ! Total flux subtracted in 200 components = 0.000731648 Jy ! Clean residual min=-0.001147 max=0.001089 Jy/beam ! Clean residual mean=0.000001 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.205401 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 115 components and 0.205401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085130Jy sigma=0.000647 ! Fit after self-cal, rms=0.085129Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085129Jy sigma=0.000647 ! Fit after self-cal, rms=0.085029Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.328 mas, bmaj=3.211 mas, bpa=-3.57 degrees ! Estimated noise=496.166 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000835582 Jy ! Component: 100 - total flux cleaned = 0.00105652 Jy ! Component: 150 - total flux cleaned = 0.0012382 Jy ! Component: 200 - total flux cleaned = 0.00140925 Jy ! Total flux subtracted in 200 components = 0.00140925 Jy ! Clean residual min=-0.001132 max=0.001280 Jy/beam ! Clean residual mean=0.000002 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.20681 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 131 components and 0.20681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085024Jy sigma=0.000647 ! Fit after self-cal, rms=0.085020Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000293601 Jy ! Component: 100 - total flux cleaned = 0.000452712 Jy ! Component: 150 - total flux cleaned = 0.000587217 Jy ! Component: 200 - total flux cleaned = 0.000715233 Jy ! Total flux subtracted in 200 components = 0.000715233 Jy ! Clean residual min=-0.001084 max=0.001186 Jy/beam ! Clean residual mean=0.000001 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.207525 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 142 components and 0.207526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085017Jy sigma=0.000647 ! Fit after self-cal, rms=0.085016Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9773 mas, bmaj=2.077 mas, bpa=2.158 degrees ! Estimated noise=407.912 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9773 x 2.077 at 2.158 degrees (North through East) ! Clean map min=-0.001018 max=0.13721 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7607 mas, bmaj=1.782 mas, bpa=4.311 degrees ! Estimated noise=656.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10742 Jy ! Component: 100 - total flux cleaned = 0.147198 Jy ! Component: 150 - total flux cleaned = 0.164791 Jy ! Component: 200 - total flux cleaned = 0.173504 Jy ! Total flux subtracted in 200 components = 0.173504 Jy ! Clean residual min=-0.002695 max=0.004480 Jy/beam ! Clean residual mean=-0.000004 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.173504 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.173504 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9773 mas, bmaj=2.077 mas, bpa=2.158 degrees ! Estimated noise=407.912 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00884886 Jy ! Component: 100 - total flux cleaned = 0.0147405 Jy ! Component: 150 - total flux cleaned = 0.0188071 Jy ! Component: 200 - total flux cleaned = 0.0216717 Jy ! Total flux subtracted in 200 components = 0.0216717 Jy ! Clean residual min=-0.001613 max=0.001773 Jy/beam ! Clean residual mean=0.000001 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.195175 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 61 components and 0.195175 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.328 mas, bmaj=3.211 mas, bpa=-3.57 degrees ! Estimated noise=496.166 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00339128 Jy ! Component: 100 - total flux cleaned = 0.00565243 Jy ! Component: 150 - total flux cleaned = 0.00729316 Jy ! Component: 200 - total flux cleaned = 0.0085298 Jy ! Total flux subtracted in 200 components = 0.0085298 Jy ! Clean residual min=-0.001437 max=0.001510 Jy/beam ! Clean residual mean=0.000002 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.203705 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000778626 Jy ! Component: 100 - total flux cleaned = 0.00134438 Jy ! Component: 150 - total flux cleaned = 0.00181468 Jy ! Component: 200 - total flux cleaned = 0.00222875 Jy ! Total flux subtracted in 200 components = 0.00222875 Jy ! Clean residual min=-0.001227 max=0.001301 Jy/beam ! Clean residual mean=0.000001 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.205934 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 139 components and 0.205934 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9773 mas, bmaj=2.077 mas, bpa=2.158 degrees ! Estimated noise=407.912 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00058253 Jy ! Component: 100 - total flux cleaned = 0.000740407 Jy ! Component: 150 - total flux cleaned = 0.000881221 Jy ! Component: 200 - total flux cleaned = 0.000966216 Jy ! Total flux subtracted in 200 components = 0.000966216 Jy ! Clean residual min=-0.001115 max=0.001012 Jy/beam ! Clean residual mean=0.000001 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.2069 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 155 components and 0.2069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085013Jy sigma=0.000647 ! Fit after self-cal, rms=0.085009Jy sigma=0.000647 wmodel J0732+0150_X_2017_02_24_pus_map.mod ! Writing 155 model components to file: J0732+0150_X_2017_02_24_pus_map.mod wobs J0732+0150_X_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J0732+0150_X_2017_02_24_pus_uvs.fits wwins J0732+0150_X_2017_02_24_pus_map.win ! wwins: Wrote 4 windows to J0732+0150_X_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000202983 Jy ! Component: 100 - total flux cleaned = -8.17979e-05 Jy ! Component: 150 - total flux cleaned = 9.93768e-05 Jy ! Component: 200 - total flux cleaned = 0.000256183 Jy ! Component: 250 - total flux cleaned = 0.000377574 Jy ! Component: 300 - total flux cleaned = 0.000422168 Jy ! Component: 350 - total flux cleaned = 0.000479604 Jy ! Component: 400 - total flux cleaned = 0.000493411 Jy ! Component: 450 - total flux cleaned = 0.000547857 Jy ! Component: 500 - total flux cleaned = 0.000574352 Jy ! Component: 550 - total flux cleaned = 0.000561256 Jy ! Component: 600 - total flux cleaned = 0.000612792 Jy ! Component: 650 - total flux cleaned = 0.000625245 Jy ! Component: 700 - total flux cleaned = 0.000637773 Jy ! Component: 750 - total flux cleaned = 0.000674225 Jy ! Component: 800 - total flux cleaned = 0.000698108 Jy ! Component: 850 - total flux cleaned = 0.000733544 Jy ! Component: 900 - total flux cleaned = 0.000756708 Jy ! Component: 950 - total flux cleaned = 0.000768264 Jy ! Component: 1000 - total flux cleaned = 0.000757104 Jy ! Component: 1050 - total flux cleaned = 0.000768491 Jy ! Component: 1100 - total flux cleaned = 0.000768613 Jy ! Component: 1150 - total flux cleaned = 0.000757774 Jy ! Component: 1200 - total flux cleaned = 0.000779426 Jy ! Component: 1250 - total flux cleaned = 0.000790157 Jy ! Component: 1300 - total flux cleaned = 0.000790185 Jy ! Component: 1350 - total flux cleaned = 0.000759291 Jy ! Component: 1400 - total flux cleaned = 0.000779962 Jy ! Component: 1450 - total flux cleaned = 0.00075963 Jy ! Component: 1500 - total flux cleaned = 0.000759561 Jy ! Component: 1550 - total flux cleaned = 0.000739637 Jy ! Component: 1600 - total flux cleaned = 0.000749385 Jy ! Component: 1650 - total flux cleaned = 0.000739712 Jy ! Component: 1700 - total flux cleaned = 0.000758771 Jy ! Component: 1750 - total flux cleaned = 0.000768152 Jy ! Component: 1800 - total flux cleaned = 0.000749273 Jy ! Component: 1850 - total flux cleaned = 0.000749321 Jy ! Component: 1900 - total flux cleaned = 0.000749072 Jy ! Component: 1950 - total flux cleaned = 0.000739991 Jy ! Component: 2000 - total flux cleaned = 0.000767052 Jy ! Total flux subtracted in 2048 components = 0.000775937 Jy ! Clean residual min=-0.000444 max=0.000454 Jy/beam ! Clean residual mean=-0.000000 rms=0.000165 Jy/beam ! Combined flux in latest and established models = 0.207676 Jy keep ! Adding 130 model components to the UV plane model. ! The established model now contains 285 components and 0.207676 Jy ![Exited script file: muppet] wmap "J0732+0150_X_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9773 x 2.077 at 2.158 degrees (North through East) ! Clean map min=-0.00075528 max=0.13698 Jy/beam ! Writing clean map to FITS file: J0732+0150_X_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.13698 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000164262 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.359749 0.359749 0.719498 1.439 2.87799 5.75598 11.512 23.0239 46.0478 92.0957 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.136 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9773 x 2.077 at 2.158 degrees (North through East) ! Clean map min=-0.00075528 max=0.13698 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0732+0150_X_2017_02_24_pus_uvs.log closed on Sat May 4 09:59:23 2019