! Started logfile: J0730-1141_X_2017_08_12_pus_uvs.log on Fri May 10 15:21:00 2019 obs J0730-1141_X_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0730-1141_X_2017_08_12_pus_uva.fits ! AN table 1: 64 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.902083 visibilities/baseline/integration-bin. ! Found source: J0730-1141 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1049 lines of history. ! ! Reading 31176 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0730-1141_X_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=4.538475Jy sigma=0.035894 ! Fit after self-cal, rms=4.501777Jy sigma=0.035630 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6568 mas, bmaj=1.635 mas, bpa=-2.08 degrees ! Estimated noise=820.912 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.06021 Jy ! Component: 100 - total flux cleaned = 4.98856 Jy ! Total flux subtracted in 100 components = 4.98856 Jy ! Clean residual min=-0.077702 max=0.353059 Jy/beam ! Clean residual mean=-0.000195 rms=0.027914 Jy/beam ! Combined flux in latest and established models = 4.98856 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 4.98856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.772631Jy sigma=0.006233 ! Fit after self-cal, rms=0.772498Jy sigma=0.006232 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.390271 Jy ! Component: 100 - total flux cleaned = 0.60958 Jy ! Total flux subtracted in 100 components = 0.60958 Jy ! Clean residual min=-0.049440 max=0.143121 Jy/beam ! Clean residual mean=-0.000071 rms=0.013331 Jy/beam ! Combined flux in latest and established models = 5.59814 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 17 components and 5.59814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.409044Jy sigma=0.003132 ! Fit after self-cal, rms=0.409019Jy sigma=0.003132 ! Inverting map ! Added new window around map position (-0.6, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.151326 Jy ! Component: 100 - total flux cleaned = 0.248469 Jy ! Total flux subtracted in 100 components = 0.248469 Jy ! Clean residual min=-0.038789 max=0.055335 Jy/beam ! Clean residual mean=-0.000030 rms=0.008969 Jy/beam ! Combined flux in latest and established models = 5.84661 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 27 components and 5.84661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.313317Jy sigma=0.002215 ! Fit after self-cal, rms=0.312663Jy sigma=0.002211 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0686031 Jy ! Component: 100 - total flux cleaned = 0.116276 Jy ! Total flux subtracted in 100 components = 0.116276 Jy ! Clean residual min=-0.035675 max=0.036886 Jy/beam ! Clean residual mean=-0.000014 rms=0.007542 Jy/beam ! Combined flux in latest and established models = 5.96288 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 35 components and 5.96288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.288062Jy sigma=0.001938 ! Fit after self-cal, rms=0.287827Jy sigma=0.001937 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8559 mas, bmaj=1.982 mas, bpa=-1.309 degrees ! Estimated noise=518.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.068275 Jy ! Component: 100 - total flux cleaned = 0.113381 Jy ! Component: 150 - total flux cleaned = 0.14593 Jy ! Component: 200 - total flux cleaned = 0.169562 Jy ! Total flux subtracted in 200 components = 0.169562 Jy ! Clean residual min=-0.023882 max=0.027738 Jy/beam ! Clean residual mean=-0.000004 rms=0.006950 Jy/beam ! Combined flux in latest and established models = 6.13244 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 56 components and 6.13244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.269555Jy sigma=0.001742 ! Fit after self-cal, rms=0.268284Jy sigma=0.001731 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.03 KP 1.00 ! LA 0.97 MK 0.99 NL 0.98 OV 1.00 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.99 KP 1.02 ! LA 0.98 MK 0.98 NL 0.98 OV 1.00 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.00 KP 0.95 ! LA 1.00 MK 1.00 NL 0.97 OV 1.01 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.04 KP 0.99 ! LA 1.00 MK 1.00 NL 0.98 OV 1.01 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.99 KP 0.98 ! LA 0.99 MK 1.05 NL 0.98 OV 1.01 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.02 KP 0.99 ! LA 1.00 MK 1.00 NL 0.98 OV 1.01 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.00 KP 0.99 ! LA 1.00 MK 1.01 NL 0.97 OV 1.01 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.02 KP 0.99 ! LA 0.98 MK 1.00 NL 0.98 OV 1.01 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.02 KP 1.00 ! LA 1.00 MK 0.98 NL 0.98 OV 1.01 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.02 KP 0.99 ! LA 1.02 MK 1.01 NL 0.98 OV 1.01 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.04 KP 0.99 ! LA 1.01 MK 1.00 NL 0.98 OV 1.02 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.01 KP 0.98 ! LA 1.00 MK 1.00 NL 0.98 OV 1.02 ! PT 1.03 SC 1.00 ! ! ! Fit before self-cal, rms=0.268284Jy sigma=0.001731 ! Fit after self-cal, rms=0.234135Jy sigma=0.001429 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8578 mas, bmaj=1.985 mas, bpa=-1.339 degrees ! Estimated noise=517.682 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143268 Jy ! Component: 100 - total flux cleaned = 0.0160436 Jy ! Component: 150 - total flux cleaned = 0.0178127 Jy ! Component: 200 - total flux cleaned = 0.0185386 Jy ! Total flux subtracted in 200 components = 0.0185386 Jy ! Clean residual min=-0.030331 max=0.022898 Jy/beam ! Clean residual mean=0.000005 rms=0.005774 Jy/beam ! Combined flux in latest and established models = 6.15098 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 73 components and 6.15098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.230784Jy sigma=0.001409 ! Fit after self-cal, rms=0.230601Jy sigma=0.001408 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.230601Jy sigma=0.001408 ! Fit after self-cal, rms=0.196628Jy sigma=0.001169 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8573 mas, bmaj=1.986 mas, bpa=-1.336 degrees ! Estimated noise=517.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141759 Jy ! Component: 100 - total flux cleaned = 0.0142733 Jy ! Component: 150 - total flux cleaned = 0.0134158 Jy ! Component: 200 - total flux cleaned = 0.0134217 Jy ! Total flux subtracted in 200 components = 0.0134217 Jy ! Clean residual min=-0.016378 max=0.014815 Jy/beam ! Clean residual mean=-0.000032 rms=0.003891 Jy/beam ! Combined flux in latest and established models = 6.1644 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 94 components and 6.1644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.194946Jy sigma=0.001154 ! Fit after self-cal, rms=0.194814Jy sigma=0.001153 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000970328 Jy ! Component: 100 - total flux cleaned = 0.00138558 Jy ! Component: 150 - total flux cleaned = 0.00158381 Jy ! Component: 200 - total flux cleaned = 0.00194762 Jy ! Total flux subtracted in 200 components = 0.00194762 Jy ! Clean residual min=-0.016808 max=0.014854 Jy/beam ! Clean residual mean=-0.000035 rms=0.003861 Jy/beam ! Combined flux in latest and established models = 6.16635 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 103 components and 6.16635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.194308Jy sigma=0.001149 ! Fit after self-cal, rms=0.194248Jy sigma=0.001149 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.194248Jy sigma=0.001149 ! Fit after self-cal, rms=0.140187Jy sigma=0.000902 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8571 mas, bmaj=1.987 mas, bpa=-1.357 degrees ! Estimated noise=517.596 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319864 Jy ! Component: 100 - total flux cleaned = 0.00386468 Jy ! Component: 150 - total flux cleaned = 0.00406005 Jy ! Component: 200 - total flux cleaned = 0.00423063 Jy ! Total flux subtracted in 200 components = 0.00423063 Jy ! Clean residual min=-0.014276 max=0.012068 Jy/beam ! Clean residual mean=0.000033 rms=0.001870 Jy/beam ! Combined flux in latest and established models = 6.17058 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 111 components and 6.17058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.139541Jy sigma=0.000896 ! Fit after self-cal, rms=0.139482Jy sigma=0.000895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000758126 Jy ! Component: 100 - total flux cleaned = 0.000764285 Jy ! Component: 150 - total flux cleaned = 0.000762406 Jy ! Component: 200 - total flux cleaned = 0.000620637 Jy ! Total flux subtracted in 200 components = 0.000620637 Jy ! Clean residual min=-0.014137 max=0.011658 Jy/beam ! Clean residual mean=0.000032 rms=0.001821 Jy/beam ! Combined flux in latest and established models = 6.1712 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 115 components and 6.1712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.139164Jy sigma=0.000893 ! Fit after self-cal, rms=0.139120Jy sigma=0.000892 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.139120Jy sigma=0.000892 ! Fit after self-cal, rms=0.138996Jy sigma=0.000892 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.184 mas, bmaj=3.87 mas, bpa=2.073 degrees ! Estimated noise=670.228 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322372 Jy ! Component: 100 - total flux cleaned = 0.00483877 Jy ! Component: 150 - total flux cleaned = 0.00579206 Jy ! Component: 200 - total flux cleaned = 0.00678113 Jy ! Total flux subtracted in 200 components = 0.00678113 Jy ! Clean residual min=-0.008079 max=0.012824 Jy/beam ! Clean residual mean=0.000062 rms=0.002323 Jy/beam ! Combined flux in latest and established models = 6.17798 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 120 components and 6.17798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.138871Jy sigma=0.000890 ! Fit after self-cal, rms=0.138721Jy sigma=0.000889 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00336036 Jy ! Component: 100 - total flux cleaned = 0.00429946 Jy ! Component: 150 - total flux cleaned = 0.00528688 Jy ! Component: 200 - total flux cleaned = 0.00664358 Jy ! Total flux subtracted in 200 components = 0.00664358 Jy ! Clean residual min=-0.006546 max=0.010031 Jy/beam ! Clean residual mean=0.000051 rms=0.001927 Jy/beam ! Combined flux in latest and established models = 6.18463 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 146 components and 6.18463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.137717Jy sigma=0.000879 ! Fit after self-cal, rms=0.137641Jy sigma=0.000879 ! Inverting map ! Added new window around map position (-4.6, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00736945 Jy ! Component: 100 - total flux cleaned = 0.0106928 Jy ! Component: 150 - total flux cleaned = 0.0129999 Jy ! Component: 200 - total flux cleaned = 0.0144834 Jy ! Total flux subtracted in 200 components = 0.0144834 Jy ! Clean residual min=-0.004713 max=0.004436 Jy/beam ! Clean residual mean=0.000018 rms=0.001271 Jy/beam ! Combined flux in latest and established models = 6.19911 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 181 components and 6.19911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.137335Jy sigma=0.000875 ! Fit after self-cal, rms=0.137292Jy sigma=0.000875 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8569 mas, bmaj=1.987 mas, bpa=-1.379 degrees ! Estimated noise=517.533 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8569 x 1.987 at -1.379 degrees (North through East) ! Clean map min=-0.011984 max=5.3913 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.137292Jy sigma=0.000875 ! Fit after self-cal, rms=0.092040Jy sigma=0.000652 ! Inverting map and beam ! Estimated beam: bmin=0.8569 mas, bmaj=1.987 mas, bpa=-1.399 degrees ! Estimated noise=517.276 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00402264 Jy ! Component: 100 - total flux cleaned = -0.00194009 Jy ! Component: 150 - total flux cleaned = -0.00015694 Jy ! Component: 200 - total flux cleaned = 0.00146829 Jy ! Total flux subtracted in 200 components = 0.00146829 Jy ! Clean residual min=-0.005395 max=0.005878 Jy/beam ! Clean residual mean=0.000022 rms=0.001029 Jy/beam ! Combined flux in latest and established models = 6.20058 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 203 components and 6.20058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090406Jy sigma=0.000640 ! Fit after self-cal, rms=0.090274Jy sigma=0.000639 ! Inverting map ! Added new window around map position (2, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213044 Jy ! Component: 100 - total flux cleaned = 0.000787415 Jy ! Component: 150 - total flux cleaned = 0.00187307 Jy ! Component: 200 - total flux cleaned = 0.0028855 Jy ! Total flux subtracted in 200 components = 0.0028855 Jy ! Clean residual min=-0.003576 max=0.004329 Jy/beam ! Clean residual mean=0.000020 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 6.20346 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 219 components and 6.20346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089381Jy sigma=0.000633 ! Fit after self-cal, rms=0.089336Jy sigma=0.000633 ! Inverting map ! Added new window around map position (-9.8, 18.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204289 Jy ! Component: 100 - total flux cleaned = 0.00250211 Jy ! Component: 150 - total flux cleaned = 0.00308414 Jy ! Component: 200 - total flux cleaned = 0.00364308 Jy ! Total flux subtracted in 200 components = 0.00364308 Jy ! Clean residual min=-0.003148 max=0.003744 Jy/beam ! Clean residual mean=0.000017 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 6.20711 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 233 components and 6.20711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088834Jy sigma=0.000629 ! Fit after self-cal, rms=0.088814Jy sigma=0.000629 ! Inverting map ! Added new window around map position (-0.2, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016583 Jy ! Component: 100 - total flux cleaned = 0.00231204 Jy ! Component: 150 - total flux cleaned = 0.00305967 Jy ! Component: 200 - total flux cleaned = 0.00341707 Jy ! Total flux subtracted in 200 components = 0.00341707 Jy ! Clean residual min=-0.003159 max=0.003360 Jy/beam ! Clean residual mean=0.000014 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 6.21052 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 247 components and 6.21052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088443Jy sigma=0.000626 ! Fit after self-cal, rms=0.088432Jy sigma=0.000626 ! Inverting map ! Added new window around map position (-4.6, -5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224244 Jy ! Component: 100 - total flux cleaned = 0.00341094 Jy ! Component: 150 - total flux cleaned = 0.00429609 Jy ! Component: 200 - total flux cleaned = 0.00461555 Jy ! Total flux subtracted in 200 components = 0.00461555 Jy ! Clean residual min=-0.003068 max=0.002591 Jy/beam ! Clean residual mean=0.000010 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 6.21514 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 257 components and 6.21514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088144Jy sigma=0.000624 ! Fit after self-cal, rms=0.088136Jy sigma=0.000624 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088136Jy sigma=0.000624 ! Fit after self-cal, rms=0.087970Jy sigma=0.000622 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6575 mas, bmaj=1.638 mas, bpa=-2.186 degrees ! Estimated noise=819.496 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.05305 Jy ! Component: 100 - total flux cleaned = 4.9768 Jy ! Component: 150 - total flux cleaned = 5.36195 Jy ! Component: 200 - total flux cleaned = 5.58205 Jy ! Total flux subtracted in 200 components = 5.58205 Jy ! Clean residual min=-0.037709 max=0.112570 Jy/beam ! Clean residual mean=-0.000043 rms=0.010544 Jy/beam ! Combined flux in latest and established models = 5.58205 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 5.58205 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8572 mas, bmaj=1.988 mas, bpa=-1.409 degrees ! Estimated noise=517.365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.217398 Jy ! Component: 100 - total flux cleaned = 0.331043 Jy ! Component: 150 - total flux cleaned = 0.400337 Jy ! Component: 200 - total flux cleaned = 0.44752 Jy ! Total flux subtracted in 200 components = 0.44752 Jy ! Clean residual min=-0.014068 max=0.026269 Jy/beam ! Clean residual mean=0.000186 rms=0.005305 Jy/beam ! Combined flux in latest and established models = 6.02957 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 64 components and 6.02957 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0340144 Jy ! Component: 100 - total flux cleaned = 0.0596558 Jy ! Component: 150 - total flux cleaned = 0.0797826 Jy ! Component: 200 - total flux cleaned = 0.0961326 Jy ! Total flux subtracted in 200 components = 0.0961326 Jy ! Clean residual min=-0.008858 max=0.009877 Jy/beam ! Clean residual mean=0.000095 rms=0.002505 Jy/beam ! Combined flux in latest and established models = 6.1257 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 108 components and 6.1257 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.184 mas, bmaj=3.871 mas, bpa=2.03 degrees ! Estimated noise=669.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0220787 Jy ! Component: 100 - total flux cleaned = 0.0367197 Jy ! Component: 150 - total flux cleaned = 0.0473296 Jy ! Component: 200 - total flux cleaned = 0.0554398 Jy ! Total flux subtracted in 200 components = 0.0554398 Jy ! Clean residual min=-0.005383 max=0.005559 Jy/beam ! Clean residual mean=0.000099 rms=0.001925 Jy/beam ! Combined flux in latest and established models = 6.18114 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00639134 Jy ! Component: 100 - total flux cleaned = 0.0108102 Jy ! Component: 150 - total flux cleaned = 0.0134883 Jy ! Component: 200 - total flux cleaned = 0.0158914 Jy ! Total flux subtracted in 200 components = 0.0158914 Jy ! Clean residual min=-0.004137 max=0.003794 Jy/beam ! Clean residual mean=0.000064 rms=0.001296 Jy/beam ! Combined flux in latest and established models = 6.19703 Jy ! Adding 128 model components to the UV plane model. ! The established model now contains 220 components and 6.19703 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8572 mas, bmaj=1.988 mas, bpa=-1.409 degrees ! Estimated noise=517.365 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000148693 Jy ! Component: 100 - total flux cleaned = 0.000149373 Jy ! Component: 150 - total flux cleaned = 0.00036324 Jy ! Component: 200 - total flux cleaned = 0.000766931 Jy ! Total flux subtracted in 200 components = 0.000766931 Jy ! Clean residual min=-0.004676 max=0.004026 Jy/beam ! Clean residual mean=0.000030 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 6.1978 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 244 components and 6.1978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090753Jy sigma=0.000643 ! Fit after self-cal, rms=0.090385Jy sigma=0.000640 wmodel J0730-1141_X_2017_08_12_pus_map.mod ! Writing 244 model components to file: J0730-1141_X_2017_08_12_pus_map.mod wobs J0730-1141_X_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0730-1141_X_2017_08_12_pus_uvs.fits wwins J0730-1141_X_2017_08_12_pus_map.win ! wwins: Wrote 9 windows to J0730-1141_X_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000792814 Jy ! Component: 100 - total flux cleaned = -0.000353274 Jy ! Component: 150 - total flux cleaned = -0.000147403 Jy ! Component: 200 - total flux cleaned = -0.000276898 Jy ! Component: 250 - total flux cleaned = -0.000467647 Jy ! Component: 300 - total flux cleaned = -0.000529074 Jy ! Component: 350 - total flux cleaned = -0.00040644 Jy ! Component: 400 - total flux cleaned = -0.000406507 Jy ! Component: 450 - total flux cleaned = -0.000347546 Jy ! Component: 500 - total flux cleaned = -0.000346901 Jy ! Component: 550 - total flux cleaned = -0.000175376 Jy ! Component: 600 - total flux cleaned = -6.80806e-06 Jy ! Component: 650 - total flux cleaned = 0.000103868 Jy ! Component: 700 - total flux cleaned = 0.00010355 Jy ! Component: 750 - total flux cleaned = 0.000212207 Jy ! Component: 800 - total flux cleaned = 0.000212391 Jy ! Component: 850 - total flux cleaned = 0.000213271 Jy ! Component: 900 - total flux cleaned = 0.000370127 Jy ! Component: 950 - total flux cleaned = 0.000369953 Jy ! Component: 1000 - total flux cleaned = 0.000420744 Jy ! Component: 1050 - total flux cleaned = 0.000572105 Jy ! Component: 1100 - total flux cleaned = 0.00057109 Jy ! Component: 1150 - total flux cleaned = 0.000669554 Jy ! Component: 1200 - total flux cleaned = 0.000571812 Jy ! Component: 1250 - total flux cleaned = 0.000717324 Jy ! Component: 1300 - total flux cleaned = 0.000765467 Jy ! Component: 1350 - total flux cleaned = 0.00100309 Jy ! Component: 1400 - total flux cleaned = 0.00114433 Jy ! Component: 1450 - total flux cleaned = 0.00123796 Jy ! Component: 1500 - total flux cleaned = 0.00160711 Jy ! Component: 1550 - total flux cleaned = 0.001698 Jy ! Component: 1600 - total flux cleaned = 0.00178843 Jy ! Component: 1650 - total flux cleaned = 0.00201304 Jy ! Component: 1700 - total flux cleaned = 0.00214673 Jy ! Component: 1750 - total flux cleaned = 0.00227897 Jy ! Component: 1800 - total flux cleaned = 0.00236601 Jy ! Component: 1850 - total flux cleaned = 0.00245304 Jy ! Component: 1900 - total flux cleaned = 0.00262526 Jy ! Component: 1950 - total flux cleaned = 0.00271037 Jy ! Component: 2000 - total flux cleaned = 0.00279505 Jy ! Total flux subtracted in 2048 components = 0.00287899 Jy ! Clean residual min=-0.002092 max=0.002095 Jy/beam ! Clean residual mean=0.000027 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 6.20068 Jy keep ! Adding 130 model components to the UV plane model. ! The established model now contains 358 components and 6.20068 Jy ![Exited script file: muppet] wmap "J0730-1141_X_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8572 x 1.988 at -1.409 degrees (North through East) ! Clean map min=-0.0071142 max=5.3994 Jy/beam ! Writing clean map to FITS file: J0730-1141_X_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 5.39938 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000731226 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0406283 0.0406283 0.0812566 0.162513 0.325026 0.650053 1.30011 2.60021 5.20042 10.4008 20.8017 41.6034 83.2068 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 5.399 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8572 x 1.988 at -1.409 degrees (North through East) ! Clean map min=-0.0071142 max=5.3994 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0730-1141_X_2017_08_12_pus_uvs.log closed on Fri May 10 15:21:03 2019