! Started logfile: J0730-1141_X_2017_03_23_pus_uvs.log on Mon May 13 10:19:50 2019 obs J0730-1141_X_2017_03_23_pus_uva.fits ! Reading UV FITS file: J0730-1141_X_2017_03_23_pus_uva.fits ! AN table 1: 37 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.684084 visibilities/baseline/integration-bin. ! Found source: J0730-1141 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1124 lines of history. ! ! Reading 13668 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0730-1141_X_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=3.778012Jy sigma=0.031734 ! Fit after self-cal, rms=3.739749Jy sigma=0.031447 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec ! Estimated beam: bmin=0.6955 mas, bmaj=1.729 mas, bpa=-0.6216 degrees ! Estimated noise=1157.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.54158 Jy ! Component: 100 - total flux cleaned = 4.33997 Jy ! Total flux subtracted in 100 components = 4.33997 Jy ! Clean residual min=-0.079880 max=0.287173 Jy/beam ! Clean residual mean=0.000998 rms=0.025917 Jy/beam ! Combined flux in latest and established models = 4.33997 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 4.33997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.571987Jy sigma=0.004883 ! Fit after self-cal, rms=0.571952Jy sigma=0.004883 ! Inverting map ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.310355 Jy ! Component: 100 - total flux cleaned = 0.474518 Jy ! Total flux subtracted in 100 components = 0.474518 Jy ! Clean residual min=-0.049580 max=0.078798 Jy/beam ! Clean residual mean=0.000078 rms=0.013190 Jy/beam ! Combined flux in latest and established models = 4.81449 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 9 components and 4.81449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.290962Jy sigma=0.002470 ! Fit after self-cal, rms=0.290348Jy sigma=0.002466 ! Inverting map ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0913004 Jy ! Component: 100 - total flux cleaned = 0.14539 Jy ! Total flux subtracted in 100 components = 0.14539 Jy ! Clean residual min=-0.046986 max=0.060039 Jy/beam ! Clean residual mean=-0.000204 rms=0.011457 Jy/beam ! Combined flux in latest and established models = 4.95988 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 17 components and 4.95988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.254450Jy sigma=0.002154 ! Fit after self-cal, rms=0.254283Jy sigma=0.002153 ! Inverting map ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec ! Estimated beam: bmin=0.9628 mas, bmaj=2.173 mas, bpa=1.948 degrees ! Estimated noise=733.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0348147 Jy ! Component: 100 - total flux cleaned = 0.0460571 Jy ! Component: 150 - total flux cleaned = 0.0477326 Jy ! Component: 200 - total flux cleaned = 0.0487487 Jy ! Total flux subtracted in 200 components = 0.0487487 Jy ! Clean residual min=-0.045626 max=0.054911 Jy/beam ! Clean residual mean=-0.000909 rms=0.012143 Jy/beam ! Combined flux in latest and established models = 5.00863 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 24 components and 5.00863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.250055Jy sigma=0.002116 ! Fit after self-cal, rms=0.249393Jy sigma=0.002112 ! Inverting map ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.01 KP 1.01 ! LA 0.97 MK 0.98 NL 0.99 OV 1.00 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.03 KP 1.00 ! LA 0.97 MK 0.98 NL 1.00 OV 1.00 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.99 KP 1.00 ! LA 1.00 MK 0.99 NL 1.00 OV 1.00 ! PT 1.06 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 1.01 KP 1.00 ! LA 1.00 MK 1.00 NL 0.99 OV 1.04 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 0.97 KP 1.00 ! LA 0.99 MK 1.02 NL 1.00 OV 1.00 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.00 KP 1.00 ! LA 0.99 MK 1.00 NL 0.99 OV 1.00 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.00 KP 1.00 ! LA 1.01 MK 1.01 NL 1.00 OV 1.00 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.00 KP 1.00 ! LA 0.99 MK 1.00 NL 0.99 OV 1.01 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.01 KP 1.01 ! LA 1.00 MK 0.98 NL 1.00 OV 1.00 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.04 KP 1.01 ! LA 1.02 MK 1.00 NL 0.99 OV 1.00 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.01 KP 0.99 ! LA 1.02 MK 1.00 NL 1.00 OV 1.01 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.99 KP 1.04 ! LA 1.00 MK 0.97 NL 1.00 OV 1.01 ! PT 1.03 SC 0.99 ! ! ! Fit before self-cal, rms=0.249393Jy sigma=0.002112 ! Fit after self-cal, rms=0.215861Jy sigma=0.001850 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec ! Estimated beam: bmin=0.9632 mas, bmaj=2.171 mas, bpa=1.855 degrees ! Estimated noise=734.052 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0539078 Jy ! Component: 100 - total flux cleaned = 0.0674479 Jy ! Component: 150 - total flux cleaned = 0.0687486 Jy ! Component: 200 - total flux cleaned = 0.069316 Jy ! Total flux subtracted in 200 components = 0.069316 Jy ! Clean residual min=-0.036118 max=0.033280 Jy/beam ! Clean residual mean=-0.000801 rms=0.010021 Jy/beam ! Combined flux in latest and established models = 5.07794 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 44 components and 5.07794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.204178Jy sigma=0.001731 ! Fit after self-cal, rms=0.203120Jy sigma=0.001722 ! Inverting map ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.203120Jy sigma=0.001722 ! Fit after self-cal, rms=0.153835Jy sigma=0.001219 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec ! Estimated beam: bmin=0.9634 mas, bmaj=2.176 mas, bpa=1.915 degrees ! Estimated noise=733.723 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232744 Jy ! Component: 100 - total flux cleaned = 0.00149774 Jy ! Component: 150 - total flux cleaned = 0.000877582 Jy ! Component: 200 - total flux cleaned = 0.00111808 Jy ! Total flux subtracted in 200 components = 0.00111808 Jy ! Clean residual min=-0.024837 max=0.021165 Jy/beam ! Clean residual mean=-0.000519 rms=0.007296 Jy/beam ! Combined flux in latest and established models = 5.07906 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 60 components and 5.07906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.151593Jy sigma=0.001201 ! Fit after self-cal, rms=0.151260Jy sigma=0.001199 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111237 Jy ! Component: 100 - total flux cleaned = 0.000133487 Jy ! Component: 150 - total flux cleaned = 0.000338045 Jy ! Component: 200 - total flux cleaned = 0.00052684 Jy ! Total flux subtracted in 200 components = 0.00052684 Jy ! Clean residual min=-0.024418 max=0.021040 Jy/beam ! Clean residual mean=-0.000523 rms=0.007263 Jy/beam ! Combined flux in latest and established models = 5.07959 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 63 components and 5.07959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.150592Jy sigma=0.001194 ! Fit after self-cal, rms=0.150500Jy sigma=0.001194 ! Inverting map ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.150500Jy sigma=0.001194 ! Fit after self-cal, rms=0.094428Jy sigma=0.000742 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec ! Estimated beam: bmin=0.9634 mas, bmaj=2.175 mas, bpa=1.888 degrees ! Estimated noise=733.355 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117624 Jy ! Component: 100 - total flux cleaned = 0.0190047 Jy ! Component: 150 - total flux cleaned = 0.0207039 Jy ! Component: 200 - total flux cleaned = 0.0210688 Jy ! Total flux subtracted in 200 components = 0.0210688 Jy ! Clean residual min=-0.006638 max=0.008408 Jy/beam ! Clean residual mean=0.000048 rms=0.001875 Jy/beam ! Combined flux in latest and established models = 5.10066 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 79 components and 5.10066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092761Jy sigma=0.000726 ! Fit after self-cal, rms=0.092557Jy sigma=0.000725 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00869481 Jy ! Component: 100 - total flux cleaned = 0.0140173 Jy ! Component: 150 - total flux cleaned = 0.0153084 Jy ! Component: 200 - total flux cleaned = 0.0156389 Jy ! Total flux subtracted in 200 components = 0.0156389 Jy ! Clean residual min=-0.006402 max=0.006994 Jy/beam ! Clean residual mean=-0.000011 rms=0.001643 Jy/beam ! Combined flux in latest and established models = 5.11629 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 99 components and 5.11629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091423Jy sigma=0.000716 ! Fit after self-cal, rms=0.091360Jy sigma=0.000715 ! Inverting map ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091360Jy sigma=0.000715 ! Fit after self-cal, rms=0.091167Jy sigma=0.000714 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec ! Estimated beam: bmin=2.394 mas, bmaj=4.302 mas, bpa=12.7 degrees ! Estimated noise=886.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00664602 Jy ! Component: 100 - total flux cleaned = 0.00911533 Jy ! Component: 150 - total flux cleaned = 0.00987671 Jy ! Component: 200 - total flux cleaned = 0.0105478 Jy ! Total flux subtracted in 200 components = 0.0105478 Jy ! Clean residual min=-0.004824 max=0.007247 Jy/beam ! Clean residual mean=0.000010 rms=0.001687 Jy/beam ! Combined flux in latest and established models = 5.12684 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 121 components and 5.12684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090953Jy sigma=0.000711 ! Fit after self-cal, rms=0.090902Jy sigma=0.000711 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000894012 Jy ! Component: 100 - total flux cleaned = 0.00143635 Jy ! Component: 150 - total flux cleaned = 0.00167965 Jy ! Component: 200 - total flux cleaned = 0.00183417 Jy ! Total flux subtracted in 200 components = 0.00183417 Jy ! Clean residual min=-0.004840 max=0.006719 Jy/beam ! Clean residual mean=-0.000004 rms=0.001637 Jy/beam ! Combined flux in latest and established models = 5.12868 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 125 components and 5.12868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090799Jy sigma=0.000710 ! Fit after self-cal, rms=0.090768Jy sigma=0.000710 ! Inverting map ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec ! Estimated beam: bmin=0.9631 mas, bmaj=2.174 mas, bpa=1.887 degrees ! Estimated noise=733.44 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9631 x 2.174 at 1.887 degrees (North through East) ! Clean map min=-0.012697 max=4.6753 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090768Jy sigma=0.000710 ! Fit after self-cal, rms=0.082668Jy sigma=0.000646 ! Inverting map and beam ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec ! Estimated beam: bmin=0.9632 mas, bmaj=2.174 mas, bpa=1.888 degrees ! Estimated noise=733.633 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267805 Jy ! Component: 100 - total flux cleaned = 0.00283703 Jy ! Component: 150 - total flux cleaned = 0.00295945 Jy ! Component: 200 - total flux cleaned = 0.00320067 Jy ! Total flux subtracted in 200 components = 0.00320067 Jy ! Clean residual min=-0.005121 max=0.006491 Jy/beam ! Clean residual mean=0.000016 rms=0.001425 Jy/beam ! Combined flux in latest and established models = 5.13188 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 130 components and 5.13188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082129Jy sigma=0.000642 ! Fit after self-cal, rms=0.082085Jy sigma=0.000641 ! Inverting map ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec ! Added new window around map position (-14.4, 18.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00575322 Jy ! Component: 100 - total flux cleaned = 0.00648615 Jy ! Component: 150 - total flux cleaned = 0.00727852 Jy ! Component: 200 - total flux cleaned = 0.00788212 Jy ! Total flux subtracted in 200 components = 0.00788212 Jy ! Clean residual min=-0.005387 max=0.005909 Jy/beam ! Clean residual mean=-0.000006 rms=0.001317 Jy/beam ! Combined flux in latest and established models = 5.13976 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 142 components and 5.13976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081500Jy sigma=0.000637 ! Fit after self-cal, rms=0.081478Jy sigma=0.000636 ! Inverting map ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec ! Added new window around map position (0.6, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000413636 Jy ! Component: 100 - total flux cleaned = 0.000588593 Jy ! Component: 150 - total flux cleaned = 0.000279434 Jy ! Component: 200 - total flux cleaned = 0.000276134 Jy ! Total flux subtracted in 200 components = 0.000276134 Jy ! Clean residual min=-0.004848 max=0.005121 Jy/beam ! Clean residual mean=-0.000004 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 5.14004 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 167 components and 5.14004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080613Jy sigma=0.000630 ! Fit after self-cal, rms=0.080547Jy sigma=0.000629 ! Inverting map ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080547Jy sigma=0.000629 ! Fit after self-cal, rms=0.080437Jy sigma=0.000628 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec ! Estimated beam: bmin=0.6962 mas, bmaj=1.732 mas, bpa=-0.7366 degrees ! Estimated noise=1155.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.53418 Jy ! Component: 100 - total flux cleaned = 4.33039 Jy ! Component: 150 - total flux cleaned = 4.63695 Jy ! Component: 200 - total flux cleaned = 4.79872 Jy ! Total flux subtracted in 200 components = 4.79872 Jy ! Clean residual min=-0.025734 max=0.078078 Jy/beam ! Clean residual mean=0.000584 rms=0.007980 Jy/beam ! Combined flux in latest and established models = 4.79872 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 4.79872 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec ! Estimated beam: bmin=0.9633 mas, bmaj=2.174 mas, bpa=1.894 degrees ! Estimated noise=733.868 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13175 Jy ! Component: 100 - total flux cleaned = 0.20245 Jy ! Component: 150 - total flux cleaned = 0.245622 Jy ! Component: 200 - total flux cleaned = 0.272975 Jy ! Total flux subtracted in 200 components = 0.272975 Jy ! Clean residual min=-0.009795 max=0.014917 Jy/beam ! Clean residual mean=0.000317 rms=0.003091 Jy/beam ! Combined flux in latest and established models = 5.0717 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 42 components and 5.0717 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec ! Added new window around map position (-0.6, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0188544 Jy ! Component: 100 - total flux cleaned = 0.0326169 Jy ! Component: 150 - total flux cleaned = 0.0435342 Jy ! Component: 200 - total flux cleaned = 0.0524562 Jy ! Total flux subtracted in 200 components = 0.0524562 Jy ! Clean residual min=-0.006304 max=0.008756 Jy/beam ! Clean residual mean=0.000089 rms=0.001680 Jy/beam ! Combined flux in latest and established models = 5.12416 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 69 components and 5.12415 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec ! Added new window around map position (-3.6, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00790918 Jy ! Component: 100 - total flux cleaned = 0.011501 Jy ! Component: 150 - total flux cleaned = 0.0137432 Jy ! Component: 200 - total flux cleaned = 0.0157884 Jy ! Total flux subtracted in 200 components = 0.0157884 Jy ! Clean residual min=-0.005620 max=0.005051 Jy/beam ! Clean residual mean=0.000026 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 5.13994 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 90 components and 5.13994 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec ! Estimated beam: bmin=2.393 mas, bmaj=4.3 mas, bpa=12.7 degrees ! Estimated noise=886.779 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281858 Jy ! Component: 100 - total flux cleaned = 0.00570008 Jy ! Component: 150 - total flux cleaned = 0.00795179 Jy ! Component: 200 - total flux cleaned = 0.00917157 Jy ! Total flux subtracted in 200 components = 0.00917157 Jy ! Clean residual min=-0.003718 max=0.004389 Jy/beam ! Clean residual mean=-0.000003 rms=0.001292 Jy/beam ! Combined flux in latest and established models = 5.14912 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000765386 Jy ! Component: 100 - total flux cleaned = 0.00145725 Jy ! Component: 150 - total flux cleaned = 0.00199582 Jy ! Component: 200 - total flux cleaned = 0.00241045 Jy ! Total flux subtracted in 200 components = 0.00241045 Jy ! Clean residual min=-0.003621 max=0.004141 Jy/beam ! Clean residual mean=-0.000021 rms=0.001231 Jy/beam ! Combined flux in latest and established models = 5.15153 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 141 components and 5.15153 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec ! Estimated beam: bmin=0.9633 mas, bmaj=2.174 mas, bpa=1.894 degrees ! Estimated noise=733.868 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00152209 Jy ! Component: 100 - total flux cleaned = -0.00222895 Jy ! Component: 150 - total flux cleaned = -0.00255935 Jy ! Component: 200 - total flux cleaned = -0.00286408 Jy ! Total flux subtracted in 200 components = -0.00286408 Jy ! Clean residual min=-0.004644 max=0.004293 Jy/beam ! Clean residual mean=-0.000001 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 5.14866 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 152 components and 5.14866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080113Jy sigma=0.000626 ! Fit after self-cal, rms=0.079942Jy sigma=0.000624 wmodel J0730-1141_X_2017_03_23_pus_map.mod ! Writing 152 model components to file: J0730-1141_X_2017_03_23_pus_map.mod wobs J0730-1141_X_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J0730-1141_X_2017_03_23_pus_uvs.fits wwins J0730-1141_X_2017_03_23_pus_map.win ! wwins: Wrote 7 windows to J0730-1141_X_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119035 Jy ! Component: 100 - total flux cleaned = -0.00234276 Jy ! Component: 150 - total flux cleaned = -0.00306388 Jy ! Component: 200 - total flux cleaned = -0.00354337 Jy ! Component: 250 - total flux cleaned = -0.00393895 Jy ! Component: 300 - total flux cleaned = -0.00432247 Jy ! Component: 350 - total flux cleaned = -0.00469522 Jy ! Component: 400 - total flux cleaned = -0.00493728 Jy ! Component: 450 - total flux cleaned = -0.00529246 Jy ! Component: 500 - total flux cleaned = -0.00558069 Jy ! Component: 550 - total flux cleaned = -0.00569418 Jy ! Component: 600 - total flux cleaned = -0.00591612 Jy ! Component: 650 - total flux cleaned = -0.00613347 Jy ! Component: 700 - total flux cleaned = -0.00645362 Jy ! Component: 750 - total flux cleaned = -0.00671435 Jy ! Component: 800 - total flux cleaned = -0.00681667 Jy ! Component: 850 - total flux cleaned = -0.0070183 Jy ! Component: 900 - total flux cleaned = -0.00711833 Jy ! Component: 950 - total flux cleaned = -0.00736275 Jy ! Component: 1000 - total flux cleaned = -0.00741078 Jy ! Component: 1050 - total flux cleaned = -0.00750697 Jy ! Component: 1100 - total flux cleaned = -0.00764779 Jy ! Component: 1150 - total flux cleaned = -0.0078789 Jy ! Component: 1200 - total flux cleaned = -0.00778808 Jy ! Component: 1250 - total flux cleaned = -0.00787876 Jy ! Component: 1300 - total flux cleaned = -0.00792411 Jy ! Component: 1350 - total flux cleaned = -0.00801276 Jy ! Component: 1400 - total flux cleaned = -0.00809917 Jy ! Component: 1450 - total flux cleaned = -0.00809888 Jy ! Component: 1500 - total flux cleaned = -0.00801377 Jy ! Component: 1550 - total flux cleaned = -0.00801444 Jy ! Component: 1600 - total flux cleaned = -0.00805611 Jy ! Component: 1650 - total flux cleaned = -0.00789089 Jy ! Component: 1700 - total flux cleaned = -0.00793191 Jy ! Component: 1750 - total flux cleaned = -0.00789207 Jy ! Component: 1800 - total flux cleaned = -0.00789192 Jy ! Component: 1850 - total flux cleaned = -0.00797094 Jy ! Component: 1900 - total flux cleaned = -0.00781366 Jy ! Component: 1950 - total flux cleaned = -0.00777539 Jy ! Component: 2000 - total flux cleaned = -0.00765983 Jy ! Total flux subtracted in 2048 components = -0.00758381 Jy ! Clean residual min=-0.002129 max=0.001978 Jy/beam ! Clean residual mean=0.000011 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 5.14108 Jy keep ! Adding 131 model components to the UV plane model. ! The established model now contains 279 components and 5.14108 Jy ![Exited script file: muppet] wmap "J0730-1141_X_2017_03_23_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9633 x 2.174 at 1.894 degrees (North through East) ! Clean map min=-0.0060182 max=4.6785 Jy/beam ! Writing clean map to FITS file: J0730-1141_X_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 4.6785 invert ! Inverting map ! Your choice of large map pixels excluded 0.0512% of the data. ! The x-axis pixel size should ideally be below 0.1998 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000722362 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0463201 0.0463201 0.0926401 0.18528 0.370561 0.741121 1.48224 2.96448 5.92897 11.8579 23.7159 47.4318 94.8635 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 4.678 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9633 x 2.174 at 1.894 degrees (North through East) ! Clean map min=-0.0060182 max=4.6785 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0730-1141_X_2017_03_23_pus_uvs.log closed on Mon May 13 10:19:51 2019