! Started logfile: J0730-1141_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:41:55 2019 obs J0730-1141_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0730-1141_S_2017_05_31_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.428889 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0730-1141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 772 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0730-1141_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=3.300449Jy sigma=0.020892 ! Fit after self-cal, rms=3.298405Jy sigma=0.020872 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.813 mas, bmaj=14.35 mas, bpa=15.22 degrees ! Estimated noise=4151.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.7999 Jy ! Component: 100 - total flux cleaned = 3.46509 Jy ! Total flux subtracted in 100 components = 3.46509 Jy ! Clean residual min=-0.138114 max=0.261563 Jy/beam ! Clean residual mean=0.003538 rms=0.058581 Jy/beam ! Combined flux in latest and established models = 3.46509 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 3.46509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.571863Jy sigma=0.003570 ! Fit after self-cal, rms=1.571796Jy sigma=0.003568 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.626 mas, bmaj=14.53 mas, bpa=13.43 degrees ! Estimated noise=3638.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.288106 Jy ! Component: 100 - total flux cleaned = 0.404696 Jy ! Component: 150 - total flux cleaned = 0.465387 Jy ! Component: 200 - total flux cleaned = 0.499858 Jy ! Total flux subtracted in 200 components = 0.499858 Jy ! Clean residual min=-0.077021 max=0.060565 Jy/beam ! Clean residual mean=0.001036 rms=0.021649 Jy/beam ! Combined flux in latest and established models = 3.96495 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 44 components and 3.96495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.447983Jy sigma=0.002651 ! Fit after self-cal, rms=1.447942Jy sigma=0.002651 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 1.04 ! LA 1.01 MK 1.00* NL 0.94 OV 1.03 ! PT 1.04 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.00 ! LA 0.98 MK 1.00* NL 1.06 OV 1.06 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00* KP 1.01 ! LA 0.99 MK 1.00* NL 1.00 OV 0.97 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 0.36 ! LA 1.03 MK 1.00* NL 1.00* OV 1.00* ! PT 0.92 SC 1.00* ! ! ! Fit before self-cal, rms=1.447942Jy sigma=0.002651 ! Fit after self-cal, rms=0.095197Jy sigma=0.000702 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.621 mas, bmaj=14.52 mas, bpa=13.49 degrees ! Estimated noise=3646.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00447884 Jy ! Component: 100 - total flux cleaned = -0.0055473 Jy ! Component: 150 - total flux cleaned = -0.00572636 Jy ! Component: 200 - total flux cleaned = -0.00588867 Jy ! Total flux subtracted in 200 components = -0.00588867 Jy ! Clean residual min=-0.013378 max=0.018598 Jy/beam ! Clean residual mean=-0.000087 rms=0.004193 Jy/beam ! Combined flux in latest and established models = 3.95906 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 3.95906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094410Jy sigma=0.000694 ! Fit after self-cal, rms=0.094209Jy sigma=0.000693 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094209Jy sigma=0.000693 ! Fit after self-cal, rms=0.094085Jy sigma=0.000693 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.621 mas, bmaj=14.52 mas, bpa=13.49 degrees ! Estimated noise=3645.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00218809 Jy ! Component: 100 - total flux cleaned = -0.00301282 Jy ! Component: 150 - total flux cleaned = -0.00313628 Jy ! Component: 200 - total flux cleaned = -0.00324415 Jy ! Total flux subtracted in 200 components = -0.00324415 Jy ! Clean residual min=-0.013001 max=0.018199 Jy/beam ! Clean residual mean=-0.000071 rms=0.004011 Jy/beam ! Combined flux in latest and established models = 3.95582 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 63 components and 3.95582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093754Jy sigma=0.000690 ! Fit after self-cal, rms=0.093728Jy sigma=0.000690 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (88, -121.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145036 Jy ! Component: 100 - total flux cleaned = 0.0196213 Jy ! Component: 150 - total flux cleaned = 0.0210748 Jy ! Component: 200 - total flux cleaned = 0.0216845 Jy ! Total flux subtracted in 200 components = 0.0216845 Jy ! Clean residual min=-0.013826 max=0.010056 Jy/beam ! Clean residual mean=-0.000076 rms=0.002914 Jy/beam ! Combined flux in latest and established models = 3.9775 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 94 components and 3.9775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091630Jy sigma=0.000671 ! Fit after self-cal, rms=0.091473Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091473Jy sigma=0.000670 ! Fit after self-cal, rms=0.091273Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.622 mas, bmaj=14.52 mas, bpa=13.49 degrees ! Estimated noise=3643.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00518586 Jy ! Component: 100 - total flux cleaned = 0.00598814 Jy ! Component: 150 - total flux cleaned = 0.0065108 Jy ! Component: 200 - total flux cleaned = 0.00660188 Jy ! Total flux subtracted in 200 components = 0.00660188 Jy ! Clean residual min=-0.009309 max=0.009400 Jy/beam ! Clean residual mean=-0.000081 rms=0.002469 Jy/beam ! Combined flux in latest and established models = 3.9841 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 108 components and 3.9841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090912Jy sigma=0.000666 ! Fit after self-cal, rms=0.090879Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000894509 Jy ! Component: 100 - total flux cleaned = 0.000982364 Jy ! Component: 150 - total flux cleaned = 0.00106026 Jy ! Component: 200 - total flux cleaned = 0.00113305 Jy ! Total flux subtracted in 200 components = 0.00113305 Jy ! Clean residual min=-0.008559 max=0.009080 Jy/beam ! Clean residual mean=-0.000083 rms=0.002344 Jy/beam ! Combined flux in latest and established models = 3.98524 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 115 components and 3.98524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090753Jy sigma=0.000664 ! Fit after self-cal, rms=0.090745Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090745Jy sigma=0.000664 ! Fit after self-cal, rms=0.090682Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.063 mas, bmaj=17.73 mas, bpa=-3.477 degrees ! Estimated noise=4268.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00345054 Jy ! Component: 100 - total flux cleaned = 0.00417303 Jy ! Component: 150 - total flux cleaned = 0.0041741 Jy ! Component: 200 - total flux cleaned = 0.00417567 Jy ! Total flux subtracted in 200 components = 0.00417567 Jy ! Clean residual min=-0.009503 max=0.009827 Jy/beam ! Clean residual mean=-0.000117 rms=0.002896 Jy/beam ! Combined flux in latest and established models = 3.98941 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 135 components and 3.98941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090572Jy sigma=0.000663 ! Fit after self-cal, rms=0.090558Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000377523 Jy ! Component: 100 - total flux cleaned = 0.000441647 Jy ! Component: 150 - total flux cleaned = 0.000504561 Jy ! Component: 200 - total flux cleaned = 0.000505614 Jy ! Total flux subtracted in 200 components = 0.000505614 Jy ! Clean residual min=-0.009093 max=0.009464 Jy/beam ! Clean residual mean=-0.000113 rms=0.002797 Jy/beam ! Combined flux in latest and established models = 3.98992 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 140 components and 3.98992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090509Jy sigma=0.000663 ! Fit after self-cal, rms=0.090506Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.622 mas, bmaj=14.52 mas, bpa=13.49 degrees ! Estimated noise=3642.66 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.622 x 14.52 at 13.49 degrees (North through East) ! Clean map min=-0.0074799 max=3.5596 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090506Jy sigma=0.000662 ! Fit after self-cal, rms=0.076432Jy sigma=0.000571 ! Inverting map and beam ! Estimated beam: bmin=4.622 mas, bmaj=14.52 mas, bpa=13.49 degrees ! Estimated noise=3642.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000614096 Jy ! Component: 100 - total flux cleaned = 0.000839686 Jy ! Component: 150 - total flux cleaned = 0.000938991 Jy ! Component: 200 - total flux cleaned = 0.000985858 Jy ! Total flux subtracted in 200 components = 0.000985858 Jy ! Clean residual min=-0.007586 max=0.007652 Jy/beam ! Clean residual mean=-0.000081 rms=0.002056 Jy/beam ! Combined flux in latest and established models = 3.9909 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 157 components and 3.9909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076355Jy sigma=0.000570 ! Fit after self-cal, rms=0.076347Jy sigma=0.000570 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000404415 Jy ! Component: 100 - total flux cleaned = 0.000449839 Jy ! Component: 150 - total flux cleaned = 0.000451164 Jy ! Component: 200 - total flux cleaned = 0.000491572 Jy ! Total flux subtracted in 200 components = 0.000491572 Jy ! Clean residual min=-0.007484 max=0.007507 Jy/beam ! Clean residual mean=-0.000079 rms=0.002025 Jy/beam ! Combined flux in latest and established models = 3.99139 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 162 components and 3.99139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076306Jy sigma=0.000570 ! Fit after self-cal, rms=0.076305Jy sigma=0.000570 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076305Jy sigma=0.000570 ! Fit after self-cal, rms=0.076300Jy sigma=0.000570 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.836 mas, bmaj=14.44 mas, bpa=15.27 degrees ! Estimated noise=4125.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.78212 Jy ! Component: 100 - total flux cleaned = 3.43334 Jy ! Component: 150 - total flux cleaned = 3.68906 Jy ! Component: 200 - total flux cleaned = 3.80117 Jy ! Total flux subtracted in 200 components = 3.80117 Jy ! Clean residual min=-0.030505 max=0.050154 Jy/beam ! Clean residual mean=0.000216 rms=0.011921 Jy/beam ! Combined flux in latest and established models = 3.80117 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 3.80117 Jy ! Inverting map and beam ! Estimated beam: bmin=4.623 mas, bmaj=14.52 mas, bpa=13.49 degrees ! Estimated noise=3642.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0697691 Jy ! Component: 100 - total flux cleaned = 0.106709 Jy ! Component: 150 - total flux cleaned = 0.130091 Jy ! Component: 200 - total flux cleaned = 0.145881 Jy ! Total flux subtracted in 200 components = 0.145881 Jy ! Clean residual min=-0.014305 max=0.011577 Jy/beam ! Clean residual mean=0.000001 rms=0.003878 Jy/beam ! Combined flux in latest and established models = 3.94705 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 59 components and 3.94705 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.065 mas, bmaj=17.74 mas, bpa=-3.478 degrees ! Estimated noise=4267.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138165 Jy ! Component: 100 - total flux cleaned = 0.0225476 Jy ! Component: 150 - total flux cleaned = 0.0285353 Jy ! Component: 200 - total flux cleaned = 0.0327515 Jy ! Total flux subtracted in 200 components = 0.0327515 Jy ! Clean residual min=-0.010539 max=0.008365 Jy/beam ! Clean residual mean=-0.000060 rms=0.003138 Jy/beam ! Combined flux in latest and established models = 3.9798 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025977 Jy ! Component: 100 - total flux cleaned = 0.00368457 Jy ! Component: 150 - total flux cleaned = 0.00452479 Jy ! Component: 200 - total flux cleaned = 0.00482585 Jy ! Total flux subtracted in 200 components = 0.00482585 Jy ! Clean residual min=-0.010197 max=0.008588 Jy/beam ! Clean residual mean=-0.000057 rms=0.002996 Jy/beam ! Combined flux in latest and established models = 3.98463 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 105 components and 3.98463 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.623 mas, bmaj=14.52 mas, bpa=13.49 degrees ! Estimated noise=3642.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112365 Jy ! Component: 100 - total flux cleaned = 0.00152377 Jy ! Component: 150 - total flux cleaned = 0.00173548 Jy ! Component: 200 - total flux cleaned = 0.00192674 Jy ! Total flux subtracted in 200 components = 0.00192674 Jy ! Clean residual min=-0.007897 max=0.008045 Jy/beam ! Clean residual mean=-0.000054 rms=0.002213 Jy/beam ! Combined flux in latest and established models = 3.98655 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 128 components and 3.98655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076667Jy sigma=0.000573 ! Fit after self-cal, rms=0.076603Jy sigma=0.000573 wmodel J0730-1141_S_2017_05_31_pus_map.mod ! Writing 128 model components to file: J0730-1141_S_2017_05_31_pus_map.mod wobs J0730-1141_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0730-1141_S_2017_05_31_pus_uvs.fits wwins J0730-1141_S_2017_05_31_pus_map.win ! wwins: Wrote 2 windows to J0730-1141_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269012 Jy ! Component: 100 - total flux cleaned = -0.000762295 Jy ! Component: 150 - total flux cleaned = -0.000434981 Jy ! Component: 200 - total flux cleaned = -0.00013554 Jy ! Component: 250 - total flux cleaned = 4.52349e-05 Jy ! Component: 300 - total flux cleaned = 0.000469951 Jy ! Component: 350 - total flux cleaned = 0.000948167 Jy ! Component: 400 - total flux cleaned = 0.00139967 Jy ! Component: 450 - total flux cleaned = 0.00190155 Jy ! Component: 500 - total flux cleaned = 0.00230955 Jy ! Component: 550 - total flux cleaned = 0.00269702 Jy ! Component: 600 - total flux cleaned = 0.00294432 Jy ! Component: 650 - total flux cleaned = 0.00323967 Jy ! Component: 700 - total flux cleaned = 0.00352181 Jy ! Component: 750 - total flux cleaned = 0.00389941 Jy ! Component: 800 - total flux cleaned = 0.00426393 Jy ! Component: 850 - total flux cleaned = 0.00456616 Jy ! Component: 900 - total flux cleaned = 0.00481072 Jy ! Component: 950 - total flux cleaned = 0.00509599 Jy ! Component: 1000 - total flux cleaned = 0.00541882 Jy ! Component: 1050 - total flux cleaned = 0.00568896 Jy ! Component: 1100 - total flux cleaned = 0.00617246 Jy ! Component: 1150 - total flux cleaned = 0.00638746 Jy ! Component: 1200 - total flux cleaned = 0.00672591 Jy ! Component: 1250 - total flux cleaned = 0.00693407 Jy ! Component: 1300 - total flux cleaned = 0.0071803 Jy ! Component: 1350 - total flux cleaned = 0.007463 Jy ! Component: 1400 - total flux cleaned = 0.00774151 Jy ! Component: 1450 - total flux cleaned = 0.00785962 Jy ! Component: 1500 - total flux cleaned = 0.00813257 Jy ! Component: 1550 - total flux cleaned = 0.0084025 Jy ! Component: 1600 - total flux cleaned = 0.00866975 Jy ! Component: 1650 - total flux cleaned = 0.0088972 Jy ! Component: 1700 - total flux cleaned = 0.00919882 Jy ! Component: 1750 - total flux cleaned = 0.00946157 Jy ! Component: 1800 - total flux cleaned = 0.00961154 Jy ! Component: 1850 - total flux cleaned = 0.00979789 Jy ! Component: 1900 - total flux cleaned = 0.00990993 Jy ! Component: 1950 - total flux cleaned = 0.0100588 Jy ! Component: 2000 - total flux cleaned = 0.0101335 Jy ! Component: 2050 - total flux cleaned = 0.010133 Jy ! Component: 2100 - total flux cleaned = 0.010095 Jy ! Component: 2150 - total flux cleaned = 0.0100192 Jy ! Component: 2200 - total flux cleaned = 0.0098666 Jy ! Component: 2250 - total flux cleaned = 0.00975114 Jy ! Component: 2300 - total flux cleaned = 0.00955693 Jy ! Component: 2350 - total flux cleaned = 0.0093603 Jy ! Component: 2400 - total flux cleaned = 0.00916184 Jy ! Component: 2450 - total flux cleaned = 0.0089214 Jy ! Component: 2500 - total flux cleaned = 0.00875921 Jy ! Component: 2550 - total flux cleaned = 0.00867699 Jy ! Component: 2600 - total flux cleaned = 0.00863538 Jy ! Component: 2650 - total flux cleaned = 0.00850922 Jy ! Component: 2700 - total flux cleaned = 0.00842422 Jy ! Component: 2750 - total flux cleaned = 0.00829415 Jy ! Component: 2800 - total flux cleaned = 0.00825029 Jy ! Component: 2850 - total flux cleaned = 0.00825026 Jy ! Component: 2900 - total flux cleaned = 0.0082052 Jy ! Component: 2950 - total flux cleaned = 0.00815895 Jy ! Component: 3000 - total flux cleaned = 0.00811255 Jy ! Component: 3050 - total flux cleaned = 0.00806503 Jy ! Component: 3100 - total flux cleaned = 0.00806523 Jy ! Component: 3150 - total flux cleaned = 0.00801635 Jy ! Component: 3200 - total flux cleaned = 0.00791642 Jy ! Component: 3250 - total flux cleaned = 0.00786506 Jy ! Component: 3300 - total flux cleaned = 0.00781366 Jy ! Component: 3350 - total flux cleaned = 0.00781377 Jy ! Component: 3400 - total flux cleaned = 0.00776039 Jy ! Component: 3450 - total flux cleaned = 0.00775976 Jy ! Component: 3500 - total flux cleaned = 0.00770448 Jy ! Component: 3550 - total flux cleaned = 0.00770434 Jy ! Component: 3600 - total flux cleaned = 0.00759048 Jy ! Component: 3650 - total flux cleaned = 0.00759095 Jy ! Component: 3700 - total flux cleaned = 0.00747296 Jy ! Component: 3750 - total flux cleaned = 0.00747284 Jy ! Component: 3800 - total flux cleaned = 0.00735039 Jy ! Component: 3850 - total flux cleaned = 0.00734962 Jy ! Component: 3900 - total flux cleaned = 0.00728584 Jy ! Component: 3950 - total flux cleaned = 0.007222 Jy ! Component: 4000 - total flux cleaned = 0.00709037 Jy ! Component: 4050 - total flux cleaned = 0.00709036 Jy ! Total flux subtracted in 4096 components = 0.00702331 Jy ! Clean residual min=-0.003822 max=0.003638 Jy/beam ! Clean residual mean=0.000011 rms=0.001086 Jy/beam ! Combined flux in latest and established models = 3.99358 Jy keep ! Adding 232 model components to the UV plane model. ! The established model now contains 360 components and 3.99358 Jy ![Exited script file: muppet] wmap "J0730-1141_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.623 x 14.52 at 13.49 degrees (North through East) ! Clean map min=-0.0088561 max=3.5922 Jy/beam ! Writing clean map to FITS file: J0730-1141_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.59216 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0013075 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.109196 0.109196 0.218392 0.436785 0.873569 1.74714 3.49428 6.98855 13.9771 27.9542 55.9084 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0039 print "peak=",int(1000*peak_flux)/1000 ! peak= 3.592 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.623 x 14.52 at 13.49 degrees (North through East) ! Clean map min=-0.0088561 max=3.5922 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0730-1141_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:42:00 2019