! Started logfile: J0730-1141_S_2017_04_28_pus_uvs.log on Thu May 2 16:19:59 2019 obs J0730-1141_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0730-1141_S_2017_04_28_pus_uva.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.122222 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0730-1141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 396 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0730-1141_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.608101Jy sigma=0.016937 ! Fit after self-cal, rms=2.598578Jy sigma=0.016956 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.769 mas, bmaj=11.29 mas, bpa=23.82 degrees ! Estimated noise=8398 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.78325 Jy ! Component: 100 - total flux cleaned = 3.39598 Jy ! Total flux subtracted in 100 components = 3.39598 Jy ! Clean residual min=-0.179788 max=0.192172 Jy/beam ! Clean residual mean=0.000345 rms=0.068780 Jy/beam ! Combined flux in latest and established models = 3.39598 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 3.39598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.411457Jy sigma=0.002586 ! Fit after self-cal, rms=0.411683Jy sigma=0.002582 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=10.31 mas, bpa=25.4 degrees ! Estimated noise=6267.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10593 Jy ! Component: 100 - total flux cleaned = 0.0893515 Jy ! Component: 150 - total flux cleaned = 0.0850592 Jy ! Component: 200 - total flux cleaned = 0.0915216 Jy ! Total flux subtracted in 200 components = 0.0915216 Jy ! Clean residual min=-0.051541 max=0.050676 Jy/beam ! Clean residual mean=0.000146 rms=0.021391 Jy/beam ! Combined flux in latest and established models = 3.4875 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 50 components and 3.4875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.257603Jy sigma=0.001633 ! Fit after self-cal, rms=0.255970Jy sigma=0.001623 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.97 KP 1.00* ! LA 1.00* MK 1.00* NL 0.95 OV 1.00* ! PT 1.00* SC 1.01 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.02 KP 1.00* ! LA 1.00* MK 1.00* NL 1.09 OV 1.00* ! PT 1.00* SC 1.01 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.96 KP 1.00* ! LA 1.00* MK 1.00* NL 0.95 OV 1.00* ! PT 1.00* SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.255970Jy sigma=0.001623 ! Fit after self-cal, rms=0.125813Jy sigma=0.000816 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=9.996 mas, bpa=24.87 degrees ! Estimated noise=6442.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0239837 Jy ! Component: 100 - total flux cleaned = 0.0299809 Jy ! Component: 150 - total flux cleaned = 0.0300442 Jy ! Component: 200 - total flux cleaned = 0.0306985 Jy ! Total flux subtracted in 200 components = 0.0306985 Jy ! Clean residual min=-0.010204 max=0.010248 Jy/beam ! Clean residual mean=0.000014 rms=0.003776 Jy/beam ! Combined flux in latest and established models = 3.5182 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 95 components and 3.5182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106144Jy sigma=0.000697 ! Fit after self-cal, rms=0.105396Jy sigma=0.000691 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105396Jy sigma=0.000691 ! Fit after self-cal, rms=0.104211Jy sigma=0.000687 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=9.998 mas, bpa=24.86 degrees ! Estimated noise=6436.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00742669 Jy ! Component: 100 - total flux cleaned = -0.0139804 Jy ! Component: 150 - total flux cleaned = -0.0200409 Jy ! Component: 200 - total flux cleaned = -0.0236638 Jy ! Total flux subtracted in 200 components = -0.0236638 Jy ! Clean residual min=-0.005768 max=0.005705 Jy/beam ! Clean residual mean=0.000007 rms=0.001955 Jy/beam ! Combined flux in latest and established models = 3.49453 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 124 components and 3.49453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100975Jy sigma=0.000666 ! Fit after self-cal, rms=0.100868Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00324158 Jy ! Component: 100 - total flux cleaned = -0.00496749 Jy ! Component: 150 - total flux cleaned = -0.00789723 Jy ! Component: 200 - total flux cleaned = -0.0103925 Jy ! Total flux subtracted in 200 components = -0.0103925 Jy ! Clean residual min=-0.003085 max=0.003075 Jy/beam ! Clean residual mean=0.000003 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 3.48414 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 149 components and 3.48414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099804Jy sigma=0.000659 ! Fit after self-cal, rms=0.099761Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099761Jy sigma=0.000658 ! Fit after self-cal, rms=0.098549Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=9.998 mas, bpa=24.87 degrees ! Estimated noise=6433.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00938315 Jy ! Component: 100 - total flux cleaned = -0.0136741 Jy ! Component: 150 - total flux cleaned = -0.0164556 Jy ! Component: 200 - total flux cleaned = -0.018319 Jy ! Total flux subtracted in 200 components = -0.018319 Jy ! Clean residual min=-0.003752 max=0.003724 Jy/beam ! Clean residual mean=0.000003 rms=0.001244 Jy/beam ! Combined flux in latest and established models = 3.46582 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 173 components and 3.46582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097287Jy sigma=0.000645 ! Fit after self-cal, rms=0.097260Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00296044 Jy ! Component: 100 - total flux cleaned = -0.00379052 Jy ! Component: 150 - total flux cleaned = -0.00463347 Jy ! Component: 200 - total flux cleaned = -0.00516878 Jy ! Total flux subtracted in 200 components = -0.00516878 Jy ! Clean residual min=-0.002196 max=0.002185 Jy/beam ! Clean residual mean=0.000000 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 3.46065 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 197 components and 3.46065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096794Jy sigma=0.000642 ! Fit after self-cal, rms=0.096776Jy sigma=0.000641 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096776Jy sigma=0.000641 ! Fit after self-cal, rms=0.096132Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.676 mas, bmaj=10.04 mas, bpa=23.28 degrees ! Estimated noise=8087.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000533463 Jy ! Component: 100 - total flux cleaned = -0.000190915 Jy ! Component: 150 - total flux cleaned = -0.000191307 Jy ! Component: 200 - total flux cleaned = -0.000473316 Jy ! Total flux subtracted in 200 components = -0.000473316 Jy ! Clean residual min=-0.002298 max=0.002325 Jy/beam ! Clean residual mean=0.000003 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 3.46018 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 216 components and 3.46018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095754Jy sigma=0.000636 ! Fit after self-cal, rms=0.095746Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000141737 Jy ! Component: 100 - total flux cleaned = -0.000145472 Jy ! Component: 150 - total flux cleaned = -0.000749872 Jy ! Component: 200 - total flux cleaned = -0.0016224 Jy ! Total flux subtracted in 200 components = -0.0016224 Jy ! Clean residual min=-0.002132 max=0.002124 Jy/beam ! Clean residual mean=0.000003 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 3.45855 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 236 components and 3.45856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095482Jy sigma=0.000634 ! Fit after self-cal, rms=0.095477Jy sigma=0.000634 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=9.999 mas, bpa=24.87 degrees ! Estimated noise=6430.59 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.072 x 9.999 at 24.87 degrees (North through East) ! Clean map min=-0.035942 max=3.3452 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095477Jy sigma=0.000634 ! Fit after self-cal, rms=0.069637Jy sigma=0.000457 ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=9.999 mas, bpa=24.88 degrees ! Estimated noise=6427.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00369219 Jy ! Component: 100 - total flux cleaned = -0.00726628 Jy ! Component: 150 - total flux cleaned = -0.00960973 Jy ! Component: 200 - total flux cleaned = -0.0106049 Jy ! Total flux subtracted in 200 components = -0.0106049 Jy ! Clean residual min=-0.002307 max=0.002298 Jy/beam ! Clean residual mean=0.000002 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 3.44795 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 251 components and 3.44795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068975Jy sigma=0.000452 ! Fit after self-cal, rms=0.068950Jy sigma=0.000452 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00218061 Jy ! Component: 100 - total flux cleaned = -0.00186332 Jy ! Component: 150 - total flux cleaned = -0.00153951 Jy ! Component: 200 - total flux cleaned = -0.00120894 Jy ! Total flux subtracted in 200 components = -0.00120894 Jy ! Clean residual min=-0.001875 max=0.001860 Jy/beam ! Clean residual mean=0.000001 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 3.44674 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 270 components and 3.44674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068722Jy sigma=0.000451 ! Fit after self-cal, rms=0.068686Jy sigma=0.000450 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068686Jy sigma=0.000450 ! Fit after self-cal, rms=0.068324Jy sigma=0.000449 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.931 mas, bmaj=10.86 mas, bpa=23.1 degrees ! Estimated noise=7315.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.73324 Jy ! Component: 100 - total flux cleaned = 3.3399 Jy ! Component: 150 - total flux cleaned = 3.4291 Jy ! Component: 200 - total flux cleaned = 3.49151 Jy ! Total flux subtracted in 200 components = 3.49151 Jy ! Clean residual min=-0.056647 max=0.056752 Jy/beam ! Clean residual mean=0.000201 rms=0.026254 Jy/beam ! Combined flux in latest and established models = 3.49151 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 3.49151 Jy ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=10 mas, bpa=24.88 degrees ! Estimated noise=6425.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203886 Jy ! Component: 100 - total flux cleaned = 0.0158017 Jy ! Component: 150 - total flux cleaned = 0.0139695 Jy ! Component: 200 - total flux cleaned = 0.0190431 Jy ! Total flux subtracted in 200 components = 0.0190431 Jy ! Clean residual min=-0.026191 max=0.026257 Jy/beam ! Clean residual mean=0.000127 rms=0.009094 Jy/beam ! Combined flux in latest and established models = 3.51055 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 94 components and 3.51055 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.675 mas, bmaj=10.04 mas, bpa=23.29 degrees ! Estimated noise=8083.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00285604 Jy ! Component: 100 - total flux cleaned = 0.00220145 Jy ! Component: 150 - total flux cleaned = 0.00553908 Jy ! Component: 200 - total flux cleaned = 0.0109622 Jy ! Total flux subtracted in 200 components = 0.0109622 Jy ! Clean residual min=-0.012969 max=0.013055 Jy/beam ! Clean residual mean=0.000060 rms=0.004551 Jy/beam ! Combined flux in latest and established models = 3.52152 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00565582 Jy ! Component: 100 - total flux cleaned = 0.00739184 Jy ! Component: 150 - total flux cleaned = 0.0104155 Jy ! Component: 200 - total flux cleaned = 0.0151651 Jy ! Total flux subtracted in 200 components = 0.0151651 Jy ! Clean residual min=-0.021049 max=0.021016 Jy/beam ! Clean residual mean=0.000071 rms=0.006736 Jy/beam ! Combined flux in latest and established models = 3.53668 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 153 components and 3.53668 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=10 mas, bpa=24.88 degrees ! Estimated noise=6425.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0084273 Jy ! Component: 100 - total flux cleaned = -0.00759772 Jy ! Component: 150 - total flux cleaned = -0.00561177 Jy ! Component: 200 - total flux cleaned = -0.00169247 Jy ! Total flux subtracted in 200 components = -0.00169247 Jy ! Clean residual min=-0.016210 max=0.016320 Jy/beam ! Clean residual mean=-0.000011 rms=0.005444 Jy/beam ! Combined flux in latest and established models = 3.53499 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 182 components and 3.53499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078145Jy sigma=0.000514 ! Fit after self-cal, rms=0.076588Jy sigma=0.000504 wmodel J0730-1141_S_2017_04_28_pus_map.mod ! Writing 182 model components to file: J0730-1141_S_2017_04_28_pus_map.mod wobs J0730-1141_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0730-1141_S_2017_04_28_pus_uvs.fits wwins J0730-1141_S_2017_04_28_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0730-1141_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.072 x 10 at 24.88 degrees (North through East) ! Clean map min=-0.026793 max=3.0801 Jy/beam ! Writing clean map to FITS file: J0730-1141_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.08012 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00474627 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.46228 0.46228 0.92456 1.84912 3.69824 7.39648 14.793 29.5859 59.1719 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0142 print "peak=",int(1000*peak_flux)/1000 ! peak= 3.08 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.072 x 10 at 24.88 degrees (North through East) ! Clean map min=-0.026793 max=3.0801 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0730-1141_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:20:03 2019