! Started logfile: J0729-3639_S_2017_02_19_pus_uvs.log on Sat May 4 18:45:59 2019 obs J0729-3639_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0729-3639_S_2017_02_19_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.348457 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0729-3639 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 9032 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0729-3639_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 640 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 569 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 569 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 973 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.849758Jy sigma=0.004755 ! Fit after self-cal, rms=0.804154Jy sigma=0.004504 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.688 mas, bmaj=7.662 mas, bpa=-12.09 degrees ! Estimated noise=3337.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.14477 Jy ! Component: 100 - total flux cleaned = 0.224729 Jy ! Total flux subtracted in 100 components = 0.224729 Jy ! Clean residual min=-0.036442 max=0.059383 Jy/beam ! Clean residual mean=0.000037 rms=0.014953 Jy/beam ! Combined flux in latest and established models = 0.224729 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.224729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246940Jy sigma=0.001333 ! Fit after self-cal, rms=0.246305Jy sigma=0.001329 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.758 mas, bmaj=10.12 mas, bpa=-9.627 degrees ! Estimated noise=1524.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0992502 Jy ! Component: 100 - total flux cleaned = 0.149221 Jy ! Component: 150 - total flux cleaned = 0.17446 Jy ! Component: 200 - total flux cleaned = 0.178412 Jy ! Total flux subtracted in 200 components = 0.178412 Jy ! Clean residual min=-0.046328 max=0.079097 Jy/beam ! Clean residual mean=0.000263 rms=0.018929 Jy/beam ! Combined flux in latest and established models = 0.40314 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 0.40314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207235Jy sigma=0.001088 ! Fit after self-cal, rms=0.206702Jy sigma=0.001083 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.86 HN 1.00* KP 0.90 ! LA 0.83 MK 2.05 NL 2.46 OV 1.30 ! PT 1.00* SC 0.60 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 0.91 HN 1.00* KP 0.88 ! LA 0.80 MK 1.92 NL 2.29 OV 1.34 ! PT 1.00* SC 0.66 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.93 HN 1.00* KP 0.77 ! LA 0.62 MK 2.19 NL 2.63 OV 1.21 ! PT 1.00* SC 0.72 ! ! ! Correcting IF 4. ! A total of 291 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.00* KP 1.00* ! LA 0.55 MK 1.91 NL 1.00* OV 1.94 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.206702Jy sigma=0.001083 ! Fit after self-cal, rms=0.281432Jy sigma=0.000875 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.874 mas, bmaj=11.14 mas, bpa=0.3689 degrees ! Estimated noise=1635.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00294965 Jy ! Component: 100 - total flux cleaned = 0.00437505 Jy ! Component: 150 - total flux cleaned = 0.00519576 Jy ! Component: 200 - total flux cleaned = 0.00557643 Jy ! Total flux subtracted in 200 components = 0.00557643 Jy ! Clean residual min=-0.030461 max=0.052998 Jy/beam ! Clean residual mean=0.000167 rms=0.013543 Jy/beam ! Combined flux in latest and established models = 0.408717 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 58 components and 0.408717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279236Jy sigma=0.000866 ! Fit after self-cal, rms=0.282599Jy sigma=0.000859 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282599Jy sigma=0.000859 ! Fit after self-cal, rms=0.301493Jy sigma=0.000849 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.183 mas, bmaj=11.73 mas, bpa=0.2162 degrees ! Estimated noise=1703.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249567 Jy ! Component: 100 - total flux cleaned = 0.00408248 Jy ! Component: 150 - total flux cleaned = 0.00500516 Jy ! Component: 200 - total flux cleaned = 0.00585051 Jy ! Total flux subtracted in 200 components = 0.00585051 Jy ! Clean residual min=-0.028143 max=0.052571 Jy/beam ! Clean residual mean=0.000070 rms=0.013249 Jy/beam ! Combined flux in latest and established models = 0.414567 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 69 components and 0.414567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.299549Jy sigma=0.000837 ! Fit after self-cal, rms=0.300163Jy sigma=0.000836 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133498 Jy ! Component: 100 - total flux cleaned = 0.00210139 Jy ! Component: 150 - total flux cleaned = 0.00245147 Jy ! Component: 200 - total flux cleaned = 0.00312248 Jy ! Total flux subtracted in 200 components = 0.00312248 Jy ! Clean residual min=-0.028117 max=0.051056 Jy/beam ! Clean residual mean=0.000069 rms=0.012980 Jy/beam ! Combined flux in latest and established models = 0.41769 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 82 components and 0.41769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.299101Jy sigma=0.000830 ! Fit after self-cal, rms=0.299205Jy sigma=0.000829 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.299205Jy sigma=0.000829 ! Fit after self-cal, rms=0.308831Jy sigma=0.000821 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.85 mas, bmaj=12.41 mas, bpa=-3.554 degrees ! Estimated noise=1779.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00265554 Jy ! Component: 100 - total flux cleaned = -0.000587393 Jy ! Component: 150 - total flux cleaned = 0.000748585 Jy ! Component: 200 - total flux cleaned = 0.001558 Jy ! Total flux subtracted in 200 components = 0.001558 Jy ! Clean residual min=-0.027352 max=0.049451 Jy/beam ! Clean residual mean=0.000049 rms=0.012593 Jy/beam ! Combined flux in latest and established models = 0.419248 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 83 components and 0.419248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307336Jy sigma=0.000808 ! Fit after self-cal, rms=0.307223Jy sigma=0.000807 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116583 Jy ! Component: 100 - total flux cleaned = 0.00185009 Jy ! Component: 150 - total flux cleaned = 0.00249474 Jy ! Component: 200 - total flux cleaned = 0.00308732 Jy ! Total flux subtracted in 200 components = 0.00308732 Jy ! Clean residual min=-0.027336 max=0.047986 Jy/beam ! Clean residual mean=0.000046 rms=0.012299 Jy/beam ! Combined flux in latest and established models = 0.422335 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 83 components and 0.422335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306532Jy sigma=0.000801 ! Fit after self-cal, rms=0.306395Jy sigma=0.000801 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306395Jy sigma=0.000801 ! Fit after self-cal, rms=0.330119Jy sigma=0.000795 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.21 mas, bmaj=33.45 mas, bpa=9.684 degrees ! Estimated noise=1697.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403991 Jy ! Component: 100 - total flux cleaned = 0.00533397 Jy ! Component: 150 - total flux cleaned = 0.00653084 Jy ! Component: 200 - total flux cleaned = 0.00763649 Jy ! Total flux subtracted in 200 components = 0.00763649 Jy ! Clean residual min=-0.028696 max=0.050547 Jy/beam ! Clean residual mean=0.000038 rms=0.013349 Jy/beam ! Combined flux in latest and established models = 0.429971 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 83 components and 0.429971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.329450Jy sigma=0.000785 ! Fit after self-cal, rms=0.329518Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000710159 Jy ! Component: 100 - total flux cleaned = 0.00171596 Jy ! Component: 150 - total flux cleaned = 0.00264122 Jy ! Component: 200 - total flux cleaned = 0.00350134 Jy ! Total flux subtracted in 200 components = 0.00350134 Jy ! Clean residual min=-0.028252 max=0.049280 Jy/beam ! Clean residual mean=0.000034 rms=0.013067 Jy/beam ! Combined flux in latest and established models = 0.433473 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 83 components and 0.433473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.329375Jy sigma=0.000780 ! Fit after self-cal, rms=0.328930Jy sigma=0.000780 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.332 mas, bmaj=13.03 mas, bpa=-6.434 degrees ! Estimated noise=1784.46 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.332 x 13.03 at -6.434 degrees (North through East) ! Clean map min=-0.024357 max=0.17403 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.593 mas, bmaj=9.133 mas, bpa=-9.881 degrees ! Estimated noise=4962.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.197635 Jy ! Component: 100 - total flux cleaned = 0.290458 Jy ! Component: 150 - total flux cleaned = 0.33841 Jy ! Component: 200 - total flux cleaned = 0.36335 Jy ! Total flux subtracted in 200 components = 0.36335 Jy ! Clean residual min=-0.030175 max=0.044919 Jy/beam ! Clean residual mean=-0.000097 rms=0.010528 Jy/beam ! Combined flux in latest and established models = 0.36335 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.36335 Jy ! Inverting map and beam ! Estimated beam: bmin=5.332 mas, bmaj=13.03 mas, bpa=-6.434 degrees ! Estimated noise=1784.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.028639 Jy ! Component: 100 - total flux cleaned = 0.0387814 Jy ! Component: 150 - total flux cleaned = 0.0398665 Jy ! Component: 200 - total flux cleaned = 0.0412287 Jy ! Total flux subtracted in 200 components = 0.0412287 Jy ! Clean residual min=-0.028017 max=0.046612 Jy/beam ! Clean residual mean=0.000057 rms=0.012641 Jy/beam ! Combined flux in latest and established models = 0.404579 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 29 components and 0.404579 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.21 mas, bmaj=33.45 mas, bpa=9.684 degrees ! Estimated noise=1697.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138571 Jy ! Component: 100 - total flux cleaned = 0.0149461 Jy ! Component: 150 - total flux cleaned = 0.0159626 Jy ! Component: 200 - total flux cleaned = 0.0165964 Jy ! Total flux subtracted in 200 components = 0.0165964 Jy ! Clean residual min=-0.029907 max=0.051973 Jy/beam ! Clean residual mean=0.000048 rms=0.014072 Jy/beam ! Combined flux in latest and established models = 0.421175 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00088946 Jy ! Component: 100 - total flux cleaned = 0.00170952 Jy ! Component: 150 - total flux cleaned = 0.00248168 Jy ! Component: 200 - total flux cleaned = 0.0029908 Jy ! Total flux subtracted in 200 components = 0.0029908 Jy ! Clean residual min=-0.029720 max=0.051249 Jy/beam ! Clean residual mean=0.000043 rms=0.013861 Jy/beam ! Combined flux in latest and established models = 0.424166 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 32 components and 0.424166 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.332 mas, bmaj=13.03 mas, bpa=-6.434 degrees ! Estimated noise=1784.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00783305 Jy ! Component: 100 - total flux cleaned = -0.00825987 Jy ! Component: 150 - total flux cleaned = -0.00863261 Jy ! Component: 200 - total flux cleaned = -0.00864597 Jy ! Total flux subtracted in 200 components = -0.00864597 Jy ! Clean residual min=-0.027029 max=0.044207 Jy/beam ! Clean residual mean=0.000036 rms=0.011949 Jy/beam ! Combined flux in latest and established models = 0.41552 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.41552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333205Jy sigma=0.000796 ! Fit after self-cal, rms=0.331098Jy sigma=0.000795 wmodel J0729-3639_S_2017_02_19_pus_map.mod ! Writing 43 model components to file: J0729-3639_S_2017_02_19_pus_map.mod wobs J0729-3639_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0729-3639_S_2017_02_19_pus_uvs.fits wwins J0729-3639_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J0729-3639_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189912 Jy ! Component: 100 - total flux cleaned = 0.0345039 Jy ! Component: 150 - total flux cleaned = 0.0482264 Jy ! Component: 200 - total flux cleaned = 0.0604807 Jy ! Component: 250 - total flux cleaned = 0.0715107 Jy ! Component: 300 - total flux cleaned = 0.0816299 Jy ! Component: 350 - total flux cleaned = 0.0909952 Jy ! Component: 400 - total flux cleaned = 0.0997265 Jy ! Component: 450 - total flux cleaned = 0.107276 Jy ! Component: 500 - total flux cleaned = 0.114414 Jy ! Component: 550 - total flux cleaned = 0.12118 Jy ! Component: 600 - total flux cleaned = 0.127605 Jy ! Component: 650 - total flux cleaned = 0.133719 Jy ! Component: 700 - total flux cleaned = 0.139541 Jy ! Component: 750 - total flux cleaned = 0.145092 Jy ! Component: 800 - total flux cleaned = 0.150614 Jy ! Component: 850 - total flux cleaned = 0.155659 Jy ! Component: 900 - total flux cleaned = 0.160695 Jy ! Component: 950 - total flux cleaned = 0.165311 Jy ! Component: 1000 - total flux cleaned = 0.169926 Jy ! Component: 1050 - total flux cleaned = 0.174349 Jy ! Component: 1100 - total flux cleaned = 0.177544 Jy ! Component: 1150 - total flux cleaned = 0.180619 Jy ! Component: 1200 - total flux cleaned = 0.182926 Jy ! Component: 1250 - total flux cleaned = 0.184836 Jy ! Component: 1300 - total flux cleaned = 0.186532 Jy ! Component: 1350 - total flux cleaned = 0.188183 Jy ! Component: 1400 - total flux cleaned = 0.189638 Jy ! Component: 1450 - total flux cleaned = 0.191342 Jy ! Component: 1500 - total flux cleaned = 0.192998 Jy ! Component: 1550 - total flux cleaned = 0.194209 Jy ! Component: 1600 - total flux cleaned = 0.195523 Jy ! Component: 1650 - total flux cleaned = 0.196677 Jy ! Component: 1700 - total flux cleaned = 0.198179 Jy ! Component: 1750 - total flux cleaned = 0.19965 Jy ! Component: 1800 - total flux cleaned = 0.200732 Jy ! Component: 1850 - total flux cleaned = 0.201913 Jy ! Component: 1900 - total flux cleaned = 0.203072 Jy ! Component: 1950 - total flux cleaned = 0.204323 Jy ! Component: 2000 - total flux cleaned = 0.205329 Jy ! Component: 2050 - total flux cleaned = 0.206098 Jy ! Component: 2100 - total flux cleaned = 0.206639 Jy ! Component: 2150 - total flux cleaned = 0.207067 Jy ! Component: 2200 - total flux cleaned = 0.207596 Jy ! Component: 2250 - total flux cleaned = 0.208121 Jy ! Component: 2300 - total flux cleaned = 0.20864 Jy ! Component: 2350 - total flux cleaned = 0.209052 Jy ! Component: 2400 - total flux cleaned = 0.209563 Jy ! Component: 2450 - total flux cleaned = 0.210172 Jy ! Component: 2500 - total flux cleaned = 0.210575 Jy ! Component: 2550 - total flux cleaned = 0.211076 Jy ! Component: 2600 - total flux cleaned = 0.211476 Jy ! Component: 2650 - total flux cleaned = 0.211873 Jy ! Component: 2700 - total flux cleaned = 0.212267 Jy ! Component: 2750 - total flux cleaned = 0.212561 Jy ! Component: 2800 - total flux cleaned = 0.21305 Jy ! Component: 2850 - total flux cleaned = 0.213438 Jy ! Component: 2900 - total flux cleaned = 0.213728 Jy ! Component: 2950 - total flux cleaned = 0.214113 Jy ! Component: 3000 - total flux cleaned = 0.214497 Jy ! Component: 3050 - total flux cleaned = 0.214879 Jy ! Component: 3100 - total flux cleaned = 0.215164 Jy ! Component: 3150 - total flux cleaned = 0.215449 Jy ! Component: 3200 - total flux cleaned = 0.215449 Jy ! Component: 3250 - total flux cleaned = 0.215733 Jy ! Component: 3300 - total flux cleaned = 0.215828 Jy ! Component: 3350 - total flux cleaned = 0.216206 Jy ! Component: 3400 - total flux cleaned = 0.216678 Jy ! Component: 3450 - total flux cleaned = 0.217059 Jy ! Component: 3500 - total flux cleaned = 0.217537 Jy ! Component: 3550 - total flux cleaned = 0.217729 Jy ! Component: 3600 - total flux cleaned = 0.217922 Jy ! Component: 3650 - total flux cleaned = 0.218213 Jy ! Component: 3700 - total flux cleaned = 0.21831 Jy ! Component: 3750 - total flux cleaned = 0.218507 Jy ! Component: 3800 - total flux cleaned = 0.218704 Jy ! Component: 3850 - total flux cleaned = 0.219002 Jy ! Component: 3900 - total flux cleaned = 0.219202 Jy ! Component: 3950 - total flux cleaned = 0.219405 Jy ! Component: 4000 - total flux cleaned = 0.219506 Jy ! Component: 4050 - total flux cleaned = 0.219816 Jy ! Total flux subtracted in 4096 components = 0.21992 Jy ! Clean residual min=-0.006189 max=0.005964 Jy/beam ! Clean residual mean=0.000164 rms=0.002029 Jy/beam ! Combined flux in latest and established models = 0.63544 Jy keep ! Adding 362 model components to the UV plane model. ! The established model now contains 405 components and 0.63544 Jy ![Exited script file: muppet] wmap "J0729-3639_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.332 x 13.03 at -6.434 degrees (North through East) ! Clean map min=-0.010232 max=0.19152 Jy/beam ! Writing clean map to FITS file: J0729-3639_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.191524 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00205775 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.22322 3.22322 6.44644 12.8929 25.7858 51.5715 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0061 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.191 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.332 x 13.03 at -6.434 degrees (North through East) ! Clean map min=-0.010232 max=0.19152 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0729-3639_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:46:04 2019