! Started logfile: J0729-1320_S_2017_07_16_pus_uvs.log on Thu May 9 11:03:48 2019 obs J0729-1320_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0729-1320_S_2017_07_16_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.588889 visibilities/baseline/integration-bin. ! Found source: J0729-1320 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 5936 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0729-1320_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 458 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.866501Jy sigma=0.006884 ! Fit after self-cal, rms=0.852435Jy sigma=0.006781 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.339 mas, bmaj=6.837 mas, bpa=-7.576 degrees ! Estimated noise=1608.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106641 Jy ! Component: 100 - total flux cleaned = 0.143118 Jy ! Total flux subtracted in 100 components = 0.143118 Jy ! Clean residual min=-0.012585 max=0.026679 Jy/beam ! Clean residual mean=0.000020 rms=0.003797 Jy/beam ! Combined flux in latest and established models = 0.143118 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.143118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103006Jy sigma=0.000798 ! Fit after self-cal, rms=0.102660Jy sigma=0.000796 ! Inverting map ! Added new window around map position (3, 1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0284577 Jy ! Component: 100 - total flux cleaned = 0.0458013 Jy ! Total flux subtracted in 100 components = 0.0458013 Jy ! Clean residual min=-0.008414 max=0.016613 Jy/beam ! Clean residual mean=0.000008 rms=0.002317 Jy/beam ! Combined flux in latest and established models = 0.188919 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.188919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091762Jy sigma=0.000710 ! Fit after self-cal, rms=0.091263Jy sigma=0.000706 ! Inverting map ! Added new window around map position (2.5, -10). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152503 Jy ! Component: 100 - total flux cleaned = 0.0234373 Jy ! Total flux subtracted in 100 components = 0.0234373 Jy ! Clean residual min=-0.006786 max=0.010111 Jy/beam ! Clean residual mean=0.000002 rms=0.001653 Jy/beam ! Combined flux in latest and established models = 0.212356 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.212356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088528Jy sigma=0.000685 ! Fit after self-cal, rms=0.088237Jy sigma=0.000683 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.748 mas, bmaj=7.47 mas, bpa=-5.883 degrees ! Estimated noise=1344.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00769483 Jy ! Component: 100 - total flux cleaned = 0.0117344 Jy ! Component: 150 - total flux cleaned = 0.012855 Jy ! Component: 200 - total flux cleaned = 0.0130417 Jy ! Total flux subtracted in 200 components = 0.0130417 Jy ! Clean residual min=-0.004233 max=0.005521 Jy/beam ! Clean residual mean=-0.000000 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 0.225398 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 46 components and 0.225398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087478Jy sigma=0.000678 ! Fit after self-cal, rms=0.087426Jy sigma=0.000678 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00 KP 1.06 ! LA 1.04 MK 1.07 NL 0.89 OV 1.01 ! PT 1.04 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.99 KP 1.03 ! LA 0.95 MK 0.95 NL 1.03 OV 1.04 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.01 KP 0.98 ! LA 0.99 MK 1.00 NL 0.96 OV 0.92 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 4. ! A total of 102 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.087426Jy sigma=0.000678 ! Fit after self-cal, rms=0.086002Jy sigma=0.000676 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.778 mas, bmaj=7.474 mas, bpa=-5.021 degrees ! Estimated noise=1345.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.71363e-05 Jy ! Component: 100 - total flux cleaned = 0.00024583 Jy ! Component: 150 - total flux cleaned = 0.000462594 Jy ! Component: 200 - total flux cleaned = 0.000591894 Jy ! Total flux subtracted in 200 components = 0.000591894 Jy ! Clean residual min=-0.003313 max=0.004081 Jy/beam ! Clean residual mean=-0.000006 rms=0.000978 Jy/beam ! Combined flux in latest and established models = 0.22599 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 56 components and 0.22599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085857Jy sigma=0.000675 ! Fit after self-cal, rms=0.085842Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085842Jy sigma=0.000675 ! Fit after self-cal, rms=0.086382Jy sigma=0.000672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.773 mas, bmaj=7.528 mas, bpa=-4.296 degrees ! Estimated noise=1350.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271865 Jy ! Component: 100 - total flux cleaned = 0.000389062 Jy ! Component: 150 - total flux cleaned = 0.000535086 Jy ! Component: 200 - total flux cleaned = 0.000580321 Jy ! Total flux subtracted in 200 components = 0.000580321 Jy ! Clean residual min=-0.003219 max=0.003371 Jy/beam ! Clean residual mean=-0.000005 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.22657 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 71 components and 0.22657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086301Jy sigma=0.000671 ! Fit after self-cal, rms=0.086310Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000168609 Jy ! Component: 100 - total flux cleaned = 5.22897e-05 Jy ! Component: 150 - total flux cleaned = -1.71368e-05 Jy ! Component: 200 - total flux cleaned = -4.81718e-05 Jy ! Total flux subtracted in 200 components = -4.81718e-05 Jy ! Clean residual min=-0.003115 max=0.003392 Jy/beam ! Clean residual mean=-0.000005 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.226522 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 75 components and 0.226522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086278Jy sigma=0.000671 ! Fit after self-cal, rms=0.086277Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086277Jy sigma=0.000671 ! Fit after self-cal, rms=0.086530Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.769 mas, bmaj=7.544 mas, bpa=-4.19 degrees ! Estimated noise=1348.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.45039e-06 Jy ! Component: 100 - total flux cleaned = 0.000191398 Jy ! Component: 150 - total flux cleaned = 0.000160776 Jy ! Component: 200 - total flux cleaned = 0.00015998 Jy ! Total flux subtracted in 200 components = 0.00015998 Jy ! Clean residual min=-0.003019 max=0.003295 Jy/beam ! Clean residual mean=-0.000005 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.226682 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 80 components and 0.226682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086499Jy sigma=0.000671 ! Fit after self-cal, rms=0.086501Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.43984e-05 Jy ! Component: 100 - total flux cleaned = 1.23804e-05 Jy ! Component: 150 - total flux cleaned = -5.64004e-05 Jy ! Component: 200 - total flux cleaned = -7.66246e-05 Jy ! Total flux subtracted in 200 components = -7.66246e-05 Jy ! Clean residual min=-0.002966 max=0.003293 Jy/beam ! Clean residual mean=-0.000005 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.226605 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 88 components and 0.226605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086488Jy sigma=0.000670 ! Fit after self-cal, rms=0.086486Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086486Jy sigma=0.000670 ! Fit after self-cal, rms=0.086689Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.624 mas, bmaj=15.23 mas, bpa=-5.298 degrees ! Estimated noise=1881.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159683 Jy ! Component: 100 - total flux cleaned = 4.3859e-05 Jy ! Component: 150 - total flux cleaned = -5.0771e-05 Jy ! Component: 200 - total flux cleaned = -0.000116453 Jy ! Total flux subtracted in 200 components = -0.000116453 Jy ! Clean residual min=-0.003019 max=0.003167 Jy/beam ! Clean residual mean=-0.000010 rms=0.000939 Jy/beam ! Combined flux in latest and established models = 0.226489 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 93 components and 0.226489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086689Jy sigma=0.000670 ! Fit after self-cal, rms=0.086692Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000172663 Jy ! Component: 100 - total flux cleaned = 0.000125869 Jy ! Component: 150 - total flux cleaned = 7.12585e-05 Jy ! Component: 200 - total flux cleaned = 3.36236e-05 Jy ! Total flux subtracted in 200 components = 3.36236e-05 Jy ! Clean residual min=-0.003027 max=0.003148 Jy/beam ! Clean residual mean=-0.000010 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.226523 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 95 components and 0.226523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086696Jy sigma=0.000670 ! Fit after self-cal, rms=0.086697Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.768 mas, bmaj=7.555 mas, bpa=-4.105 degrees ! Estimated noise=1347.85 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.768 x 7.555 at -4.105 degrees (North through East) ! Clean map min=-0.0028959 max=0.14159 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.383 mas, bmaj=6.857 mas, bpa=-5.32 degrees ! Estimated noise=1542.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107351 Jy ! Component: 100 - total flux cleaned = 0.151489 Jy ! Component: 150 - total flux cleaned = 0.176159 Jy ! Component: 200 - total flux cleaned = 0.191168 Jy ! Total flux subtracted in 200 components = 0.191168 Jy ! Clean residual min=-0.005343 max=0.008143 Jy/beam ! Clean residual mean=0.000007 rms=0.001599 Jy/beam ! Combined flux in latest and established models = 0.191168 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.191168 Jy ! Inverting map and beam ! Estimated beam: bmin=2.768 mas, bmaj=7.555 mas, bpa=-4.105 degrees ! Estimated noise=1347.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014284 Jy ! Component: 100 - total flux cleaned = 0.0225923 Jy ! Component: 150 - total flux cleaned = 0.0275489 Jy ! Component: 200 - total flux cleaned = 0.0305655 Jy ! Total flux subtracted in 200 components = 0.0305655 Jy ! Clean residual min=-0.003066 max=0.003740 Jy/beam ! Clean residual mean=-0.000004 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.221734 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 51 components and 0.221734 Jy ! Inverting map ! Added new window around map position (-86.5, -86). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263744 Jy ! Component: 100 - total flux cleaned = 0.00370898 Jy ! Component: 150 - total flux cleaned = 0.00432782 Jy ! Component: 200 - total flux cleaned = 0.00474319 Jy ! Total flux subtracted in 200 components = 0.00474319 Jy ! Clean residual min=-0.003055 max=0.002953 Jy/beam ! Clean residual mean=-0.000006 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.226477 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 76 components and 0.226477 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.624 mas, bmaj=15.23 mas, bpa=-5.298 degrees ! Estimated noise=1881.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000747756 Jy ! Component: 100 - total flux cleaned = 0.000667489 Jy ! Component: 150 - total flux cleaned = 0.000609778 Jy ! Component: 200 - total flux cleaned = 0.000532743 Jy ! Total flux subtracted in 200 components = 0.000532743 Jy ! Clean residual min=-0.002872 max=0.003339 Jy/beam ! Clean residual mean=-0.000012 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.22701 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.10176e-05 Jy ! Component: 100 - total flux cleaned = -0.00011482 Jy ! Component: 150 - total flux cleaned = -0.000177246 Jy ! Component: 200 - total flux cleaned = -0.000235197 Jy ! Total flux subtracted in 200 components = -0.000235197 Jy ! Clean residual min=-0.002814 max=0.003260 Jy/beam ! Clean residual mean=-0.000012 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.226774 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 90 components and 0.226774 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.768 mas, bmaj=7.555 mas, bpa=-4.105 degrees ! Estimated noise=1347.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000866058 Jy ! Component: 100 - total flux cleaned = 0.000869225 Jy ! Component: 150 - total flux cleaned = 0.000767259 Jy ! Component: 200 - total flux cleaned = 0.000767455 Jy ! Total flux subtracted in 200 components = 0.000767455 Jy ! Clean residual min=-0.002860 max=0.003067 Jy/beam ! Clean residual mean=-0.000006 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.227542 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 109 components and 0.227542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086596Jy sigma=0.000670 ! Fit after self-cal, rms=0.086568Jy sigma=0.000670 wmodel J0729-1320_S_2017_07_16_pus_map.mod ! Writing 109 model components to file: J0729-1320_S_2017_07_16_pus_map.mod wobs J0729-1320_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0729-1320_S_2017_07_16_pus_uvs.fits wwins J0729-1320_S_2017_07_16_pus_map.win ! wwins: Wrote 4 windows to J0729-1320_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100007 Jy ! Component: 100 - total flux cleaned = 0.00148608 Jy ! Component: 150 - total flux cleaned = 0.00207706 Jy ! Component: 200 - total flux cleaned = 0.00237886 Jy ! Component: 250 - total flux cleaned = 0.00246002 Jy ! Component: 300 - total flux cleaned = 0.00246009 Jy ! Component: 350 - total flux cleaned = 0.00242299 Jy ! Component: 400 - total flux cleaned = 0.00264311 Jy ! Component: 450 - total flux cleaned = 0.00264243 Jy ! Component: 500 - total flux cleaned = 0.00264304 Jy ! Component: 550 - total flux cleaned = 0.0026435 Jy ! Component: 600 - total flux cleaned = 0.00257776 Jy ! Component: 650 - total flux cleaned = 0.00260867 Jy ! Component: 700 - total flux cleaned = 0.00270131 Jy ! Component: 750 - total flux cleaned = 0.00279214 Jy ! Component: 800 - total flux cleaned = 0.0028215 Jy ! Component: 850 - total flux cleaned = 0.00293721 Jy ! Component: 900 - total flux cleaned = 0.00285167 Jy ! Component: 950 - total flux cleaned = 0.00285221 Jy ! Component: 1000 - total flux cleaned = 0.00290712 Jy ! Component: 1050 - total flux cleaned = 0.00298722 Jy ! Component: 1100 - total flux cleaned = 0.00298721 Jy ! Component: 1150 - total flux cleaned = 0.00308953 Jy ! Component: 1200 - total flux cleaned = 0.00321514 Jy ! Component: 1250 - total flux cleaned = 0.00341191 Jy ! Component: 1300 - total flux cleaned = 0.00348413 Jy ! Component: 1350 - total flux cleaned = 0.00357921 Jy ! Component: 1400 - total flux cleaned = 0.00369653 Jy ! Component: 1450 - total flux cleaned = 0.0039265 Jy ! Component: 1500 - total flux cleaned = 0.00397104 Jy ! Component: 1550 - total flux cleaned = 0.00408169 Jy ! Component: 1600 - total flux cleaned = 0.00423482 Jy ! Component: 1650 - total flux cleaned = 0.00432061 Jy ! Component: 1700 - total flux cleaned = 0.00438422 Jy ! Component: 1750 - total flux cleaned = 0.00446797 Jy ! Component: 1800 - total flux cleaned = 0.00452968 Jy ! Component: 1850 - total flux cleaned = 0.00465113 Jy ! Component: 1900 - total flux cleaned = 0.00471109 Jy ! Component: 1950 - total flux cleaned = 0.00478976 Jy ! Component: 2000 - total flux cleaned = 0.00477026 Jy ! Component: 2050 - total flux cleaned = 0.00484691 Jy ! Component: 2100 - total flux cleaned = 0.00486579 Jy ! Component: 2150 - total flux cleaned = 0.00488475 Jy ! Component: 2200 - total flux cleaned = 0.00499551 Jy ! Component: 2250 - total flux cleaned = 0.00503156 Jy ! Component: 2300 - total flux cleaned = 0.00503133 Jy ! Component: 2350 - total flux cleaned = 0.00506725 Jy ! Component: 2400 - total flux cleaned = 0.00513774 Jy ! Component: 2450 - total flux cleaned = 0.00510279 Jy ! Component: 2500 - total flux cleaned = 0.00515478 Jy ! Component: 2550 - total flux cleaned = 0.005189 Jy ! Component: 2600 - total flux cleaned = 0.00523974 Jy ! Component: 2650 - total flux cleaned = 0.00527304 Jy ! Component: 2700 - total flux cleaned = 0.00532258 Jy ! Component: 2750 - total flux cleaned = 0.00533882 Jy ! Component: 2800 - total flux cleaned = 0.00533896 Jy ! Component: 2850 - total flux cleaned = 0.00537128 Jy ! Component: 2900 - total flux cleaned = 0.00537116 Jy ! Component: 2950 - total flux cleaned = 0.00537122 Jy ! Component: 3000 - total flux cleaned = 0.00543369 Jy ! Component: 3050 - total flux cleaned = 0.00544908 Jy ! Component: 3100 - total flux cleaned = 0.00543374 Jy ! Component: 3150 - total flux cleaned = 0.005449 Jy ! Component: 3200 - total flux cleaned = 0.00546418 Jy ! Component: 3250 - total flux cleaned = 0.00552424 Jy ! Component: 3300 - total flux cleaned = 0.00559861 Jy ! Component: 3350 - total flux cleaned = 0.00561323 Jy ! Component: 3400 - total flux cleaned = 0.00565734 Jy ! Component: 3450 - total flux cleaned = 0.00571574 Jy ! Component: 3500 - total flux cleaned = 0.00575911 Jy ! Component: 3550 - total flux cleaned = 0.00580219 Jy ! Component: 3600 - total flux cleaned = 0.00587362 Jy ! Component: 3650 - total flux cleaned = 0.00588792 Jy ! Component: 3700 - total flux cleaned = 0.00595842 Jy ! Component: 3750 - total flux cleaned = 0.00601446 Jy ! Component: 3800 - total flux cleaned = 0.00605628 Jy ! Component: 3850 - total flux cleaned = 0.00605638 Jy ! Component: 3900 - total flux cleaned = 0.00611146 Jy ! Component: 3950 - total flux cleaned = 0.00615247 Jy ! Component: 4000 - total flux cleaned = 0.00619321 Jy ! Component: 4050 - total flux cleaned = 0.00622022 Jy ! Total flux subtracted in 4096 components = 0.00627375 Jy ! Clean residual min=-0.000761 max=0.000831 Jy/beam ! Clean residual mean=-0.000002 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.233816 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 409 components and 0.233815 Jy ![Exited script file: muppet] wmap "J0729-1320_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.768 x 7.555 at -4.105 degrees (North through East) ! Clean map min=-0.0015718 max=0.14151 Jy/beam ! Writing clean map to FITS file: J0729-1320_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.141506 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000221785 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.470194 0.470194 0.940389 1.88078 3.76156 7.52311 15.0462 30.0924 60.1849 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.141 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.768 x 7.555 at -4.105 degrees (North through East) ! Clean map min=-0.0015718 max=0.14151 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0729-1320_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:03:53 2019