! Started logfile: J0727-3813_S_2017_09_26_pus_uvs.log on Sat May 11 12:57:17 2019 obs J0727-3813_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0727-3813_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.257653 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0727-3813 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 10908 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0727-3813_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1458 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1384 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1311 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2414 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.937478Jy sigma=0.005673 ! Fit after self-cal, rms=0.895477Jy sigma=0.005468 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=12.37 mas, bpa=-30.92 degrees ! Estimated noise=2634.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0649957 Jy ! Component: 100 - total flux cleaned = 0.0875869 Jy ! Total flux subtracted in 100 components = 0.0875869 Jy ! Clean residual min=-0.010861 max=0.013634 Jy/beam ! Clean residual mean=0.000013 rms=0.003770 Jy/beam ! Combined flux in latest and established models = 0.0875869 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.0875869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111808Jy sigma=0.000653 ! Fit after self-cal, rms=0.111529Jy sigma=0.000651 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.297 mas, bmaj=19.78 mas, bpa=-20.7 degrees ! Estimated noise=1436.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0294376 Jy ! Component: 100 - total flux cleaned = 0.0441141 Jy ! Component: 150 - total flux cleaned = 0.0517609 Jy ! Component: 200 - total flux cleaned = 0.0552681 Jy ! Total flux subtracted in 200 components = 0.0552681 Jy ! Clean residual min=-0.007908 max=0.011981 Jy/beam ! Clean residual mean=-0.000045 rms=0.003333 Jy/beam ! Combined flux in latest and established models = 0.142855 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 54 components and 0.142855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104027Jy sigma=0.000605 ! Fit after self-cal, rms=0.103728Jy sigma=0.000603 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.99 ! LA 1.06 MK 1.45 NL 1.00* OV 1.27 ! PT 0.93 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.02 ! LA 0.94 MK 1.23 NL 1.00* OV 1.23 ! PT 0.94 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.93 ! LA 0.95 MK 1.29 NL 0.99 OV 1.19 ! PT 0.91 ! ! ! Correcting IF 4. ! A total of 156 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 0.81 MK 0.91 NL 1.00* OV 0.89 ! PT 0.95 ! ! ! Fit before self-cal, rms=0.103728Jy sigma=0.000603 ! Fit after self-cal, rms=0.107011Jy sigma=0.000596 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.613 mas, bmaj=20.86 mas, bpa=-20.77 degrees ! Estimated noise=1514.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240443 Jy ! Component: 100 - total flux cleaned = 0.00271035 Jy ! Component: 150 - total flux cleaned = 0.00297848 Jy ! Component: 200 - total flux cleaned = 0.00313557 Jy ! Total flux subtracted in 200 components = 0.00313557 Jy ! Clean residual min=-0.006538 max=0.007975 Jy/beam ! Clean residual mean=-0.000234 rms=0.002616 Jy/beam ! Combined flux in latest and established models = 0.145991 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 60 components and 0.145991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106827Jy sigma=0.000595 ! Fit after self-cal, rms=0.107217Jy sigma=0.000594 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107217Jy sigma=0.000594 ! Fit after self-cal, rms=0.107934Jy sigma=0.000592 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.687 mas, bmaj=21.24 mas, bpa=-20.94 degrees ! Estimated noise=1527.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181187 Jy ! Component: 100 - total flux cleaned = 0.00207619 Jy ! Component: 150 - total flux cleaned = 0.00230966 Jy ! Component: 200 - total flux cleaned = 0.00251102 Jy ! Total flux subtracted in 200 components = 0.00251102 Jy ! Clean residual min=-0.005304 max=0.006625 Jy/beam ! Clean residual mean=-0.000182 rms=0.002099 Jy/beam ! Combined flux in latest and established models = 0.148502 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 63 components and 0.148502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107795Jy sigma=0.000592 ! Fit after self-cal, rms=0.107892Jy sigma=0.000592 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000269204 Jy ! Component: 100 - total flux cleaned = 0.00032448 Jy ! Component: 150 - total flux cleaned = 0.000430335 Jy ! Component: 200 - total flux cleaned = 0.000526622 Jy ! Total flux subtracted in 200 components = 0.000526622 Jy ! Clean residual min=-0.005264 max=0.006584 Jy/beam ! Clean residual mean=-0.000192 rms=0.002078 Jy/beam ! Combined flux in latest and established models = 0.149028 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 69 components and 0.149028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107827Jy sigma=0.000591 ! Fit after self-cal, rms=0.107817Jy sigma=0.000591 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107817Jy sigma=0.000591 ! Fit after self-cal, rms=0.106746Jy sigma=0.000591 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.691 mas, bmaj=21.49 mas, bpa=-21.19 degrees ! Estimated noise=1516.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140767 Jy ! Component: 100 - total flux cleaned = 0.00164757 Jy ! Component: 150 - total flux cleaned = 0.00185609 Jy ! Component: 200 - total flux cleaned = 0.00203636 Jy ! Total flux subtracted in 200 components = 0.00203636 Jy ! Clean residual min=-0.004782 max=0.005927 Jy/beam ! Clean residual mean=-0.000153 rms=0.001871 Jy/beam ! Combined flux in latest and established models = 0.151065 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 69 components and 0.151065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106634Jy sigma=0.000590 ! Fit after self-cal, rms=0.106622Jy sigma=0.000590 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000268832 Jy ! Component: 100 - total flux cleaned = 0.000323521 Jy ! Component: 150 - total flux cleaned = 0.000416911 Jy ! Component: 200 - total flux cleaned = 0.000458428 Jy ! Total flux subtracted in 200 components = 0.000458428 Jy ! Clean residual min=-0.004834 max=0.005823 Jy/beam ! Clean residual mean=-0.000158 rms=0.001836 Jy/beam ! Combined flux in latest and established models = 0.151523 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 72 components and 0.151523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106569Jy sigma=0.000590 ! Fit after self-cal, rms=0.106546Jy sigma=0.000590 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106546Jy sigma=0.000590 ! Fit after self-cal, rms=0.105699Jy sigma=0.000590 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.72 mas, bmaj=41.37 mas, bpa=-8.964 degrees ! Estimated noise=1557.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141855 Jy ! Component: 100 - total flux cleaned = 0.0016515 Jy ! Component: 150 - total flux cleaned = 0.00192133 Jy ! Component: 200 - total flux cleaned = 0.00214847 Jy ! Total flux subtracted in 200 components = 0.00214847 Jy ! Clean residual min=-0.004588 max=0.005281 Jy/beam ! Clean residual mean=-0.000150 rms=0.001807 Jy/beam ! Combined flux in latest and established models = 0.153672 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 73 components and 0.153672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105608Jy sigma=0.000589 ! Fit after self-cal, rms=0.105580Jy sigma=0.000589 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000210785 Jy ! Component: 100 - total flux cleaned = 0.000365347 Jy ! Component: 150 - total flux cleaned = 0.000545918 Jy ! Component: 200 - total flux cleaned = 0.000663302 Jy ! Total flux subtracted in 200 components = 0.000663302 Jy ! Clean residual min=-0.004608 max=0.005089 Jy/beam ! Clean residual mean=-0.000155 rms=0.001744 Jy/beam ! Combined flux in latest and established models = 0.154335 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 84 components and 0.154335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105542Jy sigma=0.000589 ! Fit after self-cal, rms=0.105524Jy sigma=0.000589 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.678 mas, bmaj=21.72 mas, bpa=-21.4 degrees ! Estimated noise=1500.21 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.678 x 21.72 at -21.4 degrees (North through East) ! Clean map min=-0.0044637 max=0.082361 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=13.61 mas, bpa=-31.58 degrees ! Estimated noise=2890.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0661813 Jy ! Component: 100 - total flux cleaned = 0.0953109 Jy ! Component: 150 - total flux cleaned = 0.112677 Jy ! Component: 200 - total flux cleaned = 0.124013 Jy ! Total flux subtracted in 200 components = 0.124013 Jy ! Clean residual min=-0.008744 max=0.009900 Jy/beam ! Clean residual mean=-0.000022 rms=0.002568 Jy/beam ! Combined flux in latest and established models = 0.124013 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.124013 Jy ! Inverting map and beam ! Estimated beam: bmin=6.678 mas, bmaj=21.72 mas, bpa=-21.4 degrees ! Estimated noise=1500.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139011 Jy ! Component: 100 - total flux cleaned = 0.02049 Jy ! Component: 150 - total flux cleaned = 0.0238023 Jy ! Component: 200 - total flux cleaned = 0.0243992 Jy ! Total flux subtracted in 200 components = 0.0243992 Jy ! Clean residual min=-0.005849 max=0.007714 Jy/beam ! Clean residual mean=-0.000139 rms=0.002235 Jy/beam ! Combined flux in latest and established models = 0.148412 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.148412 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.72 mas, bmaj=41.37 mas, bpa=-8.964 degrees ! Estimated noise=1557.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011837 Jy ! Component: 100 - total flux cleaned = 0.00158174 Jy ! Component: 150 - total flux cleaned = 0.00187644 Jy ! Component: 200 - total flux cleaned = 0.00208622 Jy ! Total flux subtracted in 200 components = 0.00208622 Jy ! Clean residual min=-0.005406 max=0.006974 Jy/beam ! Clean residual mean=-0.000161 rms=0.002220 Jy/beam ! Combined flux in latest and established models = 0.150498 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000266297 Jy ! Component: 100 - total flux cleaned = 0.00045472 Jy ! Component: 150 - total flux cleaned = 0.00069687 Jy ! Component: 200 - total flux cleaned = 0.000871937 Jy ! Total flux subtracted in 200 components = 0.000871937 Jy ! Clean residual min=-0.005169 max=0.006352 Jy/beam ! Clean residual mean=-0.000160 rms=0.002099 Jy/beam ! Combined flux in latest and established models = 0.15137 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 65 components and 0.15137 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.678 mas, bmaj=21.72 mas, bpa=-21.4 degrees ! Estimated noise=1500.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0003125 Jy ! Component: 100 - total flux cleaned = -0.000318285 Jy ! Component: 150 - total flux cleaned = -0.000262433 Jy ! Component: 200 - total flux cleaned = -0.00021175 Jy ! Total flux subtracted in 200 components = -0.00021175 Jy ! Clean residual min=-0.005113 max=0.005903 Jy/beam ! Clean residual mean=-0.000137 rms=0.001913 Jy/beam ! Combined flux in latest and established models = 0.151159 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 75 components and 0.151159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105703Jy sigma=0.000590 ! Fit after self-cal, rms=0.105642Jy sigma=0.000590 wmodel J0727-3813_S_2017_09_26_pus_map.mod ! Writing 75 model components to file: J0727-3813_S_2017_09_26_pus_map.mod wobs J0727-3813_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0727-3813_S_2017_09_26_pus_uvs.fits wwins J0727-3813_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J0727-3813_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251694 Jy ! Component: 100 - total flux cleaned = 0.00367438 Jy ! Component: 150 - total flux cleaned = 0.0044589 Jy ! Component: 200 - total flux cleaned = 0.00535 Jy ! Component: 250 - total flux cleaned = 0.00552614 Jy ! Component: 300 - total flux cleaned = 0.00536293 Jy ! Component: 350 - total flux cleaned = 0.00564626 Jy ! Component: 400 - total flux cleaned = 0.00591312 Jy ! Component: 450 - total flux cleaned = 0.00595289 Jy ! Component: 500 - total flux cleaned = 0.0060306 Jy ! Component: 550 - total flux cleaned = 0.0062127 Jy ! Component: 600 - total flux cleaned = 0.0064539 Jy ! Component: 650 - total flux cleaned = 0.00658393 Jy ! Component: 700 - total flux cleaned = 0.00680685 Jy ! Component: 750 - total flux cleaned = 0.00708675 Jy ! Component: 800 - total flux cleaned = 0.00736175 Jy ! Component: 850 - total flux cleaned = 0.00760309 Jy ! Component: 900 - total flux cleaned = 0.00790152 Jy ! Component: 950 - total flux cleaned = 0.00819615 Jy ! Component: 1000 - total flux cleaned = 0.0084587 Jy ! Component: 1050 - total flux cleaned = 0.00868956 Jy ! Component: 1100 - total flux cleaned = 0.00889057 Jy ! Component: 1150 - total flux cleaned = 0.00917649 Jy ! Component: 1200 - total flux cleaned = 0.00940514 Jy ! Component: 1250 - total flux cleaned = 0.00963427 Jy ! Component: 1300 - total flux cleaned = 0.00989221 Jy ! Component: 1350 - total flux cleaned = 0.0101512 Jy ! Component: 1400 - total flux cleaned = 0.0103529 Jy ! Component: 1450 - total flux cleaned = 0.0104107 Jy ! Component: 1500 - total flux cleaned = 0.010498 Jy ! Component: 1550 - total flux cleaned = 0.0105569 Jy ! Component: 1600 - total flux cleaned = 0.0107053 Jy ! Component: 1650 - total flux cleaned = 0.0107656 Jy ! Component: 1700 - total flux cleaned = 0.0108561 Jy ! Component: 1750 - total flux cleaned = 0.0109174 Jy ! Component: 1800 - total flux cleaned = 0.0110399 Jy ! Component: 1850 - total flux cleaned = 0.0111957 Jy ! Component: 1900 - total flux cleaned = 0.0112588 Jy ! Component: 1950 - total flux cleaned = 0.011354 Jy ! Component: 2000 - total flux cleaned = 0.0115145 Jy ! Component: 2050 - total flux cleaned = 0.0116447 Jy ! Component: 2100 - total flux cleaned = 0.0117766 Jy ! Component: 2150 - total flux cleaned = 0.011844 Jy ! Component: 2200 - total flux cleaned = 0.0119464 Jy ! Component: 2250 - total flux cleaned = 0.0120506 Jy ! Component: 2300 - total flux cleaned = 0.0121568 Jy ! Component: 2350 - total flux cleaned = 0.012265 Jy ! Component: 2400 - total flux cleaned = 0.0123388 Jy ! Component: 2450 - total flux cleaned = 0.0123387 Jy ! Component: 2500 - total flux cleaned = 0.0123387 Jy ! Component: 2550 - total flux cleaned = 0.0123778 Jy ! Component: 2600 - total flux cleaned = 0.0124177 Jy ! Component: 2650 - total flux cleaned = 0.0124999 Jy ! Component: 2700 - total flux cleaned = 0.0124999 Jy ! Component: 2750 - total flux cleaned = 0.0125854 Jy ! Component: 2800 - total flux cleaned = 0.0126291 Jy ! Component: 2850 - total flux cleaned = 0.0127633 Jy ! Component: 2900 - total flux cleaned = 0.0128091 Jy ! Component: 2950 - total flux cleaned = 0.0129022 Jy ! Component: 3000 - total flux cleaned = 0.0129987 Jy ! Component: 3050 - total flux cleaned = 0.0129994 Jy ! Component: 3100 - total flux cleaned = 0.0130002 Jy ! Component: 3150 - total flux cleaned = 0.0130006 Jy ! Component: 3200 - total flux cleaned = 0.0130545 Jy ! Component: 3250 - total flux cleaned = 0.0130546 Jy ! Component: 3300 - total flux cleaned = 0.0131108 Jy ! Component: 3350 - total flux cleaned = 0.0131097 Jy ! Component: 3400 - total flux cleaned = 0.013169 Jy ! Component: 3450 - total flux cleaned = 0.0132303 Jy ! Component: 3500 - total flux cleaned = 0.0132925 Jy ! Component: 3550 - total flux cleaned = 0.0133584 Jy ! Component: 3600 - total flux cleaned = 0.0133585 Jy ! Component: 3650 - total flux cleaned = 0.0133564 Jy ! Component: 3700 - total flux cleaned = 0.0134261 Jy ! Component: 3750 - total flux cleaned = 0.0134268 Jy ! Component: 3800 - total flux cleaned = 0.0135005 Jy ! Component: 3850 - total flux cleaned = 0.0134993 Jy ! Component: 3900 - total flux cleaned = 0.0135762 Jy ! Component: 3950 - total flux cleaned = 0.0136573 Jy ! Component: 4000 - total flux cleaned = 0.0137397 Jy ! Component: 4050 - total flux cleaned = 0.0137412 Jy ! Total flux subtracted in 4096 components = 0.0137414 Jy ! Clean residual min=-0.004703 max=0.004429 Jy/beam ! Clean residual mean=0.000008 rms=0.001682 Jy/beam ! Combined flux in latest and established models = 0.1649 Jy keep ! Adding 169 model components to the UV plane model. ! The established model now contains 244 components and 0.1649 Jy ![Exited script file: muppet] wmap "J0727-3813_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.678 x 21.72 at -21.4 degrees (North through East) ! Clean map min=-0.012422 max=0.080612 Jy/beam ! Writing clean map to FITS file: J0727-3813_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0806117 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0018313 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -6.81527 6.81527 13.6305 27.2611 54.5221 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0054 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.08 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.678 x 21.72 at -21.4 degrees (North through East) ! Clean map min=-0.012422 max=0.080612 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0727-3813_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:57:22 2019