! Started logfile: J0727-3813_S_2017_02_19_pus_uvs.log on Sat May 4 18:45:49 2019 obs J0727-3813_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0727-3813_S_2017_02_19_pus_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.257471 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0727-3813 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 6720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0727-3813_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 748 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 731 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 688 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1105 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.962042Jy sigma=0.005162 ! Fit after self-cal, rms=0.904484Jy sigma=0.004894 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.657 mas, bmaj=29.92 mas, bpa=4.472 degrees ! Estimated noise=4726.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0778036 Jy ! Component: 100 - total flux cleaned = 0.101103 Jy ! Total flux subtracted in 100 components = 0.101103 Jy ! Clean residual min=-0.014482 max=0.014914 Jy/beam ! Clean residual mean=0.000191 rms=0.005321 Jy/beam ! Combined flux in latest and established models = 0.101103 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.101103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128371Jy sigma=0.000631 ! Fit after self-cal, rms=0.127696Jy sigma=0.000627 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.879 mas, bmaj=34.14 mas, bpa=6.727 degrees ! Estimated noise=1917.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170978 Jy ! Component: 100 - total flux cleaned = 0.0283933 Jy ! Component: 150 - total flux cleaned = 0.0366427 Jy ! Component: 200 - total flux cleaned = 0.0427853 Jy ! Total flux subtracted in 200 components = 0.0427853 Jy ! Clean residual min=-0.007911 max=0.008188 Jy/beam ! Clean residual mean=0.000056 rms=0.002810 Jy/beam ! Combined flux in latest and established models = 0.143888 Jy ! Performing phase self-cal ! Adding 90 model components to the UV plane model. ! The established model now contains 107 components and 0.143889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124870Jy sigma=0.000611 ! Fit after self-cal, rms=0.124608Jy sigma=0.000609 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.94 HN 1.00* KP 1.12 ! LA 0.91 MK 1.00* NL 0.86 OV 1.16 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.07 HN 1.00* KP 1.07 ! LA 0.92 MK 1.00* NL 0.93 OV 1.18 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.91 HN 1.00* KP 0.87 ! LA 0.77 MK 1.00* NL 1.15 OV 1.12 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 345 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.124608Jy sigma=0.000609 ! Fit after self-cal, rms=0.122064Jy sigma=0.000607 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.018 mas, bmaj=34.11 mas, bpa=6.393 degrees ! Estimated noise=1972.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00547594 Jy ! Component: 100 - total flux cleaned = 0.00739162 Jy ! Component: 150 - total flux cleaned = 0.00920771 Jy ! Component: 200 - total flux cleaned = 0.0107998 Jy ! Total flux subtracted in 200 components = 0.0107998 Jy ! Clean residual min=-0.004331 max=0.007126 Jy/beam ! Clean residual mean=0.000011 rms=0.001872 Jy/beam ! Combined flux in latest and established models = 0.154688 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 116 components and 0.154688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121660Jy sigma=0.000604 ! Fit after self-cal, rms=0.121787Jy sigma=0.000603 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121787Jy sigma=0.000603 ! Fit after self-cal, rms=0.121553Jy sigma=0.000602 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.963 mas, bmaj=33.75 mas, bpa=6.173 degrees ! Estimated noise=1973.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341802 Jy ! Component: 100 - total flux cleaned = 0.00495294 Jy ! Component: 150 - total flux cleaned = 0.00629141 Jy ! Component: 200 - total flux cleaned = 0.00737416 Jy ! Total flux subtracted in 200 components = 0.00737416 Jy ! Clean residual min=-0.003390 max=0.005611 Jy/beam ! Clean residual mean=0.000012 rms=0.001506 Jy/beam ! Combined flux in latest and established models = 0.162062 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 128 components and 0.162062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121336Jy sigma=0.000600 ! Fit after self-cal, rms=0.121294Jy sigma=0.000600 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152483 Jy ! Component: 100 - total flux cleaned = 0.00239521 Jy ! Component: 150 - total flux cleaned = 0.00318087 Jy ! Component: 200 - total flux cleaned = 0.00381626 Jy ! Total flux subtracted in 200 components = 0.00381626 Jy ! Clean residual min=-0.003401 max=0.005037 Jy/beam ! Clean residual mean=0.000014 rms=0.001405 Jy/beam ! Combined flux in latest and established models = 0.165879 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 148 components and 0.165879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121167Jy sigma=0.000599 ! Fit after self-cal, rms=0.121104Jy sigma=0.000599 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121104Jy sigma=0.000599 ! Fit after self-cal, rms=0.119633Jy sigma=0.000599 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.864 mas, bmaj=33.26 mas, bpa=5.823 degrees ! Estimated noise=1954.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163151 Jy ! Component: 100 - total flux cleaned = 0.00253896 Jy ! Component: 150 - total flux cleaned = 0.0034023 Jy ! Component: 200 - total flux cleaned = 0.00409698 Jy ! Total flux subtracted in 200 components = 0.00409698 Jy ! Clean residual min=-0.002934 max=0.004178 Jy/beam ! Clean residual mean=0.000012 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.169976 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 160 components and 0.169976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119532Jy sigma=0.000598 ! Fit after self-cal, rms=0.119483Jy sigma=0.000598 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000759657 Jy ! Component: 100 - total flux cleaned = 0.00126506 Jy ! Component: 150 - total flux cleaned = 0.00178887 Jy ! Component: 200 - total flux cleaned = 0.00220609 Jy ! Total flux subtracted in 200 components = 0.00220609 Jy ! Clean residual min=-0.003013 max=0.003848 Jy/beam ! Clean residual mean=0.000014 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.172182 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 166 components and 0.172182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119415Jy sigma=0.000598 ! Fit after self-cal, rms=0.119349Jy sigma=0.000597 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119349Jy sigma=0.000597 ! Fit after self-cal, rms=0.118409Jy sigma=0.000597 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.85 mas, bmaj=36.39 mas, bpa=5.987 degrees ! Estimated noise=1948.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000928079 Jy ! Component: 100 - total flux cleaned = 0.00147153 Jy ! Component: 150 - total flux cleaned = 0.00198869 Jy ! Component: 200 - total flux cleaned = 0.00244188 Jy ! Total flux subtracted in 200 components = 0.00244188 Jy ! Clean residual min=-0.002518 max=0.003192 Jy/beam ! Clean residual mean=0.000015 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.174624 Jy selfcal ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 199 components and 0.174624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118361Jy sigma=0.000597 ! Fit after self-cal, rms=0.118332Jy sigma=0.000597 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000483818 Jy ! Component: 100 - total flux cleaned = 0.000865601 Jy ! Component: 150 - total flux cleaned = 0.00125003 Jy ! Component: 200 - total flux cleaned = 0.00155148 Jy ! Total flux subtracted in 200 components = 0.00155148 Jy ! Clean residual min=-0.002374 max=0.003022 Jy/beam ! Clean residual mean=0.000018 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.176175 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 209 components and 0.176175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118294Jy sigma=0.000597 ! Fit after self-cal, rms=0.118264Jy sigma=0.000596 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=8.792 mas, bmaj=32.92 mas, bpa=5.442 degrees ! Estimated noise=1935.62 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.792 x 32.92 at 5.442 degrees (North through East) ! Clean map min=-0.0028837 max=0.090409 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.796 mas, bmaj=30.85 mas, bpa=1.942 degrees ! Estimated noise=4949.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0724769 Jy ! Component: 100 - total flux cleaned = 0.103463 Jy ! Component: 150 - total flux cleaned = 0.122833 Jy ! Component: 200 - total flux cleaned = 0.136776 Jy ! Total flux subtracted in 200 components = 0.136776 Jy ! Clean residual min=-0.011064 max=0.012670 Jy/beam ! Clean residual mean=0.000108 rms=0.004084 Jy/beam ! Combined flux in latest and established models = 0.136776 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 65 model components to the UV plane model. ! The established model now contains 65 components and 0.136776 Jy ! Inverting map and beam ! Estimated beam: bmin=8.792 mas, bmaj=32.92 mas, bpa=5.442 degrees ! Estimated noise=1935.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113845 Jy ! Component: 100 - total flux cleaned = 0.0193309 Jy ! Component: 150 - total flux cleaned = 0.0253406 Jy ! Component: 200 - total flux cleaned = 0.0294238 Jy ! Total flux subtracted in 200 components = 0.0294238 Jy ! Clean residual min=-0.003893 max=0.006440 Jy/beam ! Clean residual mean=0.000007 rms=0.001553 Jy/beam ! Combined flux in latest and established models = 0.166199 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 93 components and 0.166199 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.85 mas, bmaj=36.39 mas, bpa=5.987 degrees ! Estimated noise=1948.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027425 Jy ! Component: 100 - total flux cleaned = 0.00409976 Jy ! Component: 150 - total flux cleaned = 0.00517759 Jy ! Component: 200 - total flux cleaned = 0.0062156 Jy ! Total flux subtracted in 200 components = 0.0062156 Jy ! Clean residual min=-0.002887 max=0.004340 Jy/beam ! Clean residual mean=0.000015 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.172415 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000905091 Jy ! Component: 100 - total flux cleaned = 0.00162805 Jy ! Component: 150 - total flux cleaned = 0.00232823 Jy ! Component: 200 - total flux cleaned = 0.00294125 Jy ! Total flux subtracted in 200 components = 0.00294125 Jy ! Clean residual min=-0.002572 max=0.003420 Jy/beam ! Clean residual mean=0.000017 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.175356 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 119 components and 0.175356 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=8.792 mas, bmaj=32.92 mas, bpa=5.442 degrees ! Estimated noise=1935.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000664531 Jy ! Component: 100 - total flux cleaned = 0.00109388 Jy ! Component: 150 - total flux cleaned = 0.00139343 Jy ! Component: 200 - total flux cleaned = 0.00163205 Jy ! Total flux subtracted in 200 components = 0.00163205 Jy ! Clean residual min=-0.002662 max=0.003173 Jy/beam ! Clean residual mean=0.000014 rms=0.000912 Jy/beam ! Combined flux in latest and established models = 0.176988 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 140 components and 0.176988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118241Jy sigma=0.000596 ! Fit after self-cal, rms=0.118184Jy sigma=0.000596 wmodel J0727-3813_S_2017_02_19_pus_map.mod ! Writing 140 model components to file: J0727-3813_S_2017_02_19_pus_map.mod wobs J0727-3813_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0727-3813_S_2017_02_19_pus_uvs.fits wwins J0727-3813_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J0727-3813_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134291 Jy ! Component: 100 - total flux cleaned = 0.00207728 Jy ! Component: 150 - total flux cleaned = 0.00255618 Jy ! Component: 200 - total flux cleaned = 0.00291239 Jy ! Component: 250 - total flux cleaned = 0.00320197 Jy ! Component: 300 - total flux cleaned = 0.00360527 Jy ! Component: 350 - total flux cleaned = 0.00395022 Jy ! Component: 400 - total flux cleaned = 0.00421536 Jy ! Component: 450 - total flux cleaned = 0.00421692 Jy ! Component: 500 - total flux cleaned = 0.00427082 Jy ! Component: 550 - total flux cleaned = 0.00424549 Jy ! Component: 600 - total flux cleaned = 0.00426913 Jy ! Component: 650 - total flux cleaned = 0.00426858 Jy ! Component: 700 - total flux cleaned = 0.00438086 Jy ! Component: 750 - total flux cleaned = 0.0044241 Jy ! Component: 800 - total flux cleaned = 0.0045288 Jy ! Component: 850 - total flux cleaned = 0.00463073 Jy ! Component: 900 - total flux cleaned = 0.00470998 Jy ! Component: 950 - total flux cleaned = 0.00480676 Jy ! Component: 1000 - total flux cleaned = 0.00488283 Jy ! Component: 1050 - total flux cleaned = 0.00499462 Jy ! Component: 1100 - total flux cleaned = 0.00508602 Jy ! Component: 1150 - total flux cleaned = 0.00519357 Jy ! Component: 1200 - total flux cleaned = 0.00531714 Jy ! Component: 1250 - total flux cleaned = 0.00542085 Jy ! Component: 1300 - total flux cleaned = 0.00554025 Jy ! Component: 1350 - total flux cleaned = 0.0056409 Jy ! Component: 1400 - total flux cleaned = 0.00572377 Jy ! Component: 1450 - total flux cleaned = 0.00578932 Jy ! Component: 1500 - total flux cleaned = 0.00583765 Jy ! Component: 1550 - total flux cleaned = 0.00586943 Jy ! Component: 1600 - total flux cleaned = 0.00591668 Jy ! Component: 1650 - total flux cleaned = 0.00597861 Jy ! Component: 1700 - total flux cleaned = 0.00600893 Jy ! Component: 1750 - total flux cleaned = 0.00602408 Jy ! Component: 1800 - total flux cleaned = 0.00608419 Jy ! Component: 1850 - total flux cleaned = 0.00612881 Jy ! Component: 1900 - total flux cleaned = 0.00618732 Jy ! Component: 1950 - total flux cleaned = 0.00620182 Jy ! Component: 2000 - total flux cleaned = 0.00624492 Jy ! Component: 2050 - total flux cleaned = 0.00625914 Jy ! Component: 2100 - total flux cleaned = 0.00634433 Jy ! Component: 2150 - total flux cleaned = 0.00642939 Jy ! Component: 2200 - total flux cleaned = 0.00650003 Jy ! Component: 2250 - total flux cleaned = 0.00658467 Jy ! Component: 2300 - total flux cleaned = 0.00662695 Jy ! Component: 2350 - total flux cleaned = 0.00671132 Jy ! Component: 2400 - total flux cleaned = 0.00675358 Jy ! Component: 2450 - total flux cleaned = 0.00683789 Jy ! Component: 2500 - total flux cleaned = 0.00690813 Jy ! Component: 2550 - total flux cleaned = 0.0069924 Jy ! Component: 2600 - total flux cleaned = 0.00704859 Jy ! Component: 2650 - total flux cleaned = 0.00710472 Jy ! Component: 2700 - total flux cleaned = 0.00720286 Jy ! Component: 2750 - total flux cleaned = 0.00727289 Jy ! Component: 2800 - total flux cleaned = 0.00732892 Jy ! Component: 2850 - total flux cleaned = 0.00739899 Jy ! Component: 2900 - total flux cleaned = 0.00745516 Jy ! Component: 2950 - total flux cleaned = 0.00746925 Jy ! Component: 3000 - total flux cleaned = 0.00751148 Jy ! Component: 3050 - total flux cleaned = 0.00751143 Jy ! Component: 3100 - total flux cleaned = 0.00753967 Jy ! Component: 3150 - total flux cleaned = 0.00758198 Jy ! Component: 3200 - total flux cleaned = 0.00761026 Jy ! Component: 3250 - total flux cleaned = 0.0076102 Jy ! Component: 3300 - total flux cleaned = 0.00763853 Jy ! Component: 3350 - total flux cleaned = 0.00766706 Jy ! Component: 3400 - total flux cleaned = 0.00766712 Jy ! Component: 3450 - total flux cleaned = 0.00772431 Jy ! Component: 3500 - total flux cleaned = 0.00771007 Jy ! Component: 3550 - total flux cleaned = 0.00775315 Jy ! Component: 3600 - total flux cleaned = 0.00776755 Jy ! Component: 3650 - total flux cleaned = 0.00778188 Jy ! Component: 3700 - total flux cleaned = 0.00781091 Jy ! Component: 3750 - total flux cleaned = 0.00782552 Jy ! Component: 3800 - total flux cleaned = 0.00776695 Jy ! Component: 3850 - total flux cleaned = 0.00776699 Jy ! Component: 3900 - total flux cleaned = 0.00772235 Jy ! Component: 3950 - total flux cleaned = 0.00769239 Jy ! Component: 4000 - total flux cleaned = 0.00766213 Jy ! Component: 4050 - total flux cleaned = 0.00763173 Jy ! Total flux subtracted in 4096 components = 0.00763164 Jy ! Clean residual min=-0.000879 max=0.000899 Jy/beam ! Clean residual mean=0.000020 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.18462 Jy keep ! Adding 349 model components to the UV plane model. ! The established model now contains 489 components and 0.18462 Jy ![Exited script file: muppet] wmap "J0727-3813_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.792 x 32.92 at 5.442 degrees (North through East) ! Clean map min=-0.002835 max=0.088712 Jy/beam ! Writing clean map to FITS file: J0727-3813_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0887124 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000274096 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.926916 0.926916 1.85383 3.70766 7.41533 14.8307 29.6613 59.3226 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.088 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.792 x 32.92 at 5.442 degrees (North through East) ! Clean map min=-0.002835 max=0.088712 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0727-3813_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:45:54 2019