! Started logfile: J0726+7911_X_2017_05_01_pus_uvs.log on Wed May  1 19:53:56 2019
obs J0726+7911_X_2017_05_01_pus_uva.fits
! Reading UV FITS file: J0726+7911_X_2017_05_01_pus_uva.fits
! AN table 1: 20 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.903333 visibilities/baseline/integration-bin.
! Found source: J0726+7911
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 863 lines of history.
! 
! Reading 9756 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J0726+7911_X_2017_05_01_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.487272Jy  sigma=0.004109
! Fit after  self-cal, rms=0.482524Jy  sigma=0.004069
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=0.8055 mas, bmaj=0.9711 mas, bpa=20.06 degrees
! Estimated noise=1319.29 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.398114 Jy
! Component: 100  -  total flux cleaned = 0.533723 Jy
! Total flux subtracted in 100 components = 0.533723 Jy
! Clean residual min=-0.018717 max=0.059960 Jy/beam
! Clean residual mean=-0.000061 rms=0.006365 Jy/beam
! Combined flux in latest and established models = 0.533723 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.533723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.136071Jy  sigma=0.001182
! Fit after  self-cal, rms=0.136039Jy  sigma=0.001181
! Inverting map 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0656579 Jy
! Component: 100  -  total flux cleaned = 0.10025 Jy
! Total flux subtracted in 100 components = 0.10025 Jy
! Clean residual min=-0.010449 max=0.016632 Jy/beam
! Clean residual mean=-0.000049 rms=0.002672 Jy/beam
! Combined flux in latest and established models = 0.633973 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 12 components and 0.633973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095767Jy  sigma=0.000771
! Fit after  self-cal, rms=0.095748Jy  sigma=0.000771
! Inverting map 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.019155 Jy
! Component: 100  -  total flux cleaned = 0.0303954 Jy
! Total flux subtracted in 100 components = 0.0303954 Jy
! Clean residual min=-0.009653 max=0.009630 Jy/beam
! Clean residual mean=-0.000046 rms=0.002040 Jy/beam
! Combined flux in latest and established models = 0.664368 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 17 components and 0.664368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091658Jy  sigma=0.000723
! Fit after  self-cal, rms=0.091661Jy  sigma=0.000723
! Inverting map 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=1.006 mas, bmaj=1.238 mas, bpa=17.13 degrees
! Estimated noise=837.154 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00830935 Jy
! Component: 100  -  total flux cleaned = 0.0124579 Jy
! Component: 150  -  total flux cleaned = 0.0144243 Jy
! Component: 200  -  total flux cleaned = 0.0146742 Jy
! Total flux subtracted in 200 components = 0.0146742 Jy
! Clean residual min=-0.007923 max=0.007978 Jy/beam
! Clean residual mean=-0.000080 rms=0.001737 Jy/beam
! Combined flux in latest and established models = 0.679042 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 22 components and 0.679042 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091105Jy  sigma=0.000715
! Fit after  self-cal, rms=0.091103Jy  sigma=0.000715
! Inverting map 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.01     HN        1.02     KP        1.01     
!   LA        0.95     MK        0.95     NL        0.96     OV        0.98     
!   PT        1.01     SC        1.09     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     HN        0.99     KP        0.98     
!   LA        0.96     MK        1.00     NL        0.97     OV        1.00     
!   PT        1.03     SC        1.08     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        0.98     KP        1.01     
!   LA        0.98     MK        0.95     NL        0.96     OV        1.00     
!   PT        1.00     SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.99     HN        1.01     KP        1.00     
!   LA        0.98     MK        0.98     NL        0.96     OV        1.00     
!   PT        1.02     SC        1.09     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.99     HN        0.99     KP        1.00     
!   LA        0.97     MK        0.98     NL        0.99     OV        1.01     
!   PT        1.03     SC        1.05     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        0.99     KP        0.99     
!   LA        0.98     MK        0.97     NL        1.00     OV        1.01     
!   PT        1.00     SC        1.05     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.02     HN        1.00     KP        1.00     
!   LA        0.99     MK        0.97     NL        0.98     OV        1.02     
!   PT        1.01     SC        1.06     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.06     HN        1.01     KP        0.99     
!   LA        0.98     MK        0.97     NL        0.99     OV        1.01     
!   PT        1.02     SC        1.09     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.00     KP        0.99     
!   LA        1.00     MK        0.95     NL        0.98     OV        1.02     
!   PT        1.03     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     HN        1.01     KP        1.00     
!   LA        1.01     MK        0.97     NL        1.00     OV        1.03     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.08     HN        1.10     KP        1.05     
!   LA        1.06     MK        1.04     NL        1.06     OV        1.06     
!   PT        1.11     SC        1.11     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.01     KP        0.96     
!   LA        1.00     MK        0.96     NL        1.01     OV        1.02     
!   PT        1.04     SC        1.08     
! 
! 
! Fit before self-cal, rms=0.091103Jy  sigma=0.000715
! Fit after  self-cal, rms=0.086699Jy  sigma=0.000661
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=1.011 mas, bmaj=1.239 mas, bpa=17.52 degrees
! Estimated noise=839.151 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000264876 Jy
! Component: 100  -  total flux cleaned = -0.000268589 Jy
! Component: 150  -  total flux cleaned = -0.0002695 Jy
! Component: 200  -  total flux cleaned = -0.000224039 Jy
! Total flux subtracted in 200 components = -0.000224039 Jy
! Clean residual min=-0.004313 max=0.004302 Jy/beam
! Clean residual mean=-0.000056 rms=0.001029 Jy/beam
! Combined flux in latest and established models = 0.678818 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 25 components and 0.678818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086640Jy  sigma=0.000660
! Fit after  self-cal, rms=0.086658Jy  sigma=0.000660
! Inverting map 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086658Jy  sigma=0.000660
! Fit after  self-cal, rms=0.085997Jy  sigma=0.000651
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=1.01 mas, bmaj=1.239 mas, bpa=17.06 degrees
! Estimated noise=838.621 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000206989 Jy
! Component: 100  -  total flux cleaned = -0.000210104 Jy
! Component: 150  -  total flux cleaned = -0.00020708 Jy
! Component: 200  -  total flux cleaned = -0.000161498 Jy
! Total flux subtracted in 200 components = -0.000161498 Jy
! Clean residual min=-0.002908 max=0.003453 Jy/beam
! Clean residual mean=-0.000004 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.678657 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 29 components and 0.678657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085922Jy  sigma=0.000650
! Fit after  self-cal, rms=0.085924Jy  sigma=0.000650
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.2, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00191619 Jy
! Component: 100  -  total flux cleaned = 0.00187004 Jy
! Component: 150  -  total flux cleaned = 0.00169862 Jy
! Component: 200  -  total flux cleaned = 0.00144161 Jy
! Total flux subtracted in 200 components = 0.00144161 Jy
! Clean residual min=-0.002690 max=0.002557 Jy/beam
! Clean residual mean=-0.000004 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.680098 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 41 components and 0.680098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085772Jy  sigma=0.000649
! Fit after  self-cal, rms=0.085760Jy  sigma=0.000649
! Inverting map 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Added new window around map position (1.6, -3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00155683 Jy
! Component: 100  -  total flux cleaned = 0.00173045 Jy
! Component: 150  -  total flux cleaned = 0.00162843 Jy
! Component: 200  -  total flux cleaned = 0.00144108 Jy
! Total flux subtracted in 200 components = 0.00144108 Jy
! Clean residual min=-0.002131 max=0.002303 Jy/beam
! Clean residual mean=-0.000004 rms=0.000545 Jy/beam
! Combined flux in latest and established models = 0.681539 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 56 components and 0.681539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085651Jy  sigma=0.000648
! Fit after  self-cal, rms=0.085649Jy  sigma=0.000648
! Inverting map 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085649Jy  sigma=0.000648
! Fit after  self-cal, rms=0.085667Jy  sigma=0.000648
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=1.01 mas, bmaj=1.239 mas, bpa=16.76 degrees
! Estimated noise=838.436 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106146 Jy
! Component: 100  -  total flux cleaned = 0.000925375 Jy
! Component: 150  -  total flux cleaned = 0.000799513 Jy
! Component: 200  -  total flux cleaned = 0.000760837 Jy
! Total flux subtracted in 200 components = 0.000760837 Jy
! Clean residual min=-0.001939 max=0.002142 Jy/beam
! Clean residual mean=-0.000004 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.6823 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 64 components and 0.6823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085614Jy  sigma=0.000648
! Fit after  self-cal, rms=0.085612Jy  sigma=0.000648
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00019487 Jy
! Component: 100  -  total flux cleaned = 0.000157356 Jy
! Component: 150  -  total flux cleaned = 8.60158e-05 Jy
! Component: 200  -  total flux cleaned = 5.14685e-05 Jy
! Total flux subtracted in 200 components = 5.14685e-05 Jy
! Clean residual min=-0.001844 max=0.002088 Jy/beam
! Clean residual mean=-0.000004 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.682352 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 68 components and 0.682352 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085581Jy  sigma=0.000647
! Fit after  self-cal, rms=0.085581Jy  sigma=0.000647
! Inverting map 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085581Jy  sigma=0.000647
! Fit after  self-cal, rms=0.085579Jy  sigma=0.000647
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=2.401 mas, bmaj=2.744 mas, bpa=25.52 degrees
! Estimated noise=1063.95 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.3251e-05 Jy
! Component: 100  -  total flux cleaned = -9.14566e-05 Jy
! Component: 150  -  total flux cleaned = -0.00017198 Jy
! Component: 200  -  total flux cleaned = -0.000171331 Jy
! Total flux subtracted in 200 components = -0.000171331 Jy
! Clean residual min=-0.001767 max=0.002159 Jy/beam
! Clean residual mean=-0.000010 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.682181 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 78 components and 0.682181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085573Jy  sigma=0.000647
! Fit after  self-cal, rms=0.085572Jy  sigma=0.000647
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.0657e-05 Jy
! Component: 100  -  total flux cleaned = -6.03377e-05 Jy
! Component: 150  -  total flux cleaned = -6.03379e-05 Jy
! Component: 200  -  total flux cleaned = -6.03028e-05 Jy
! Total flux subtracted in 200 components = -6.03028e-05 Jy
! Clean residual min=-0.001748 max=0.002165 Jy/beam
! Clean residual mean=-0.000009 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.68212 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 84 components and 0.68212 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085568Jy  sigma=0.000647
! Fit after  self-cal, rms=0.085566Jy  sigma=0.000647
! Inverting map 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=1.009 mas, bmaj=1.239 mas, bpa=16.59 degrees
! Estimated noise=838.235 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.009 x 1.239 at 16.59 degrees (North through East)
! Clean map  min=-0.0018219  max=0.53922 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085566Jy  sigma=0.000647
! Fit after  self-cal, rms=0.081450Jy  sigma=0.000607
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=1.009 mas, bmaj=1.239 mas, bpa=16.66 degrees
! Estimated noise=838.042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000723529 Jy
! Component: 100  -  total flux cleaned = 0.000796535 Jy
! Component: 150  -  total flux cleaned = 0.000764914 Jy
! Component: 200  -  total flux cleaned = 0.000764317 Jy
! Total flux subtracted in 200 components = 0.000764317 Jy
! Clean residual min=-0.001823 max=0.001999 Jy/beam
! Clean residual mean=-0.000006 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.682885 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 92 components and 0.682885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081418Jy  sigma=0.000606
! Fit after  self-cal, rms=0.081417Jy  sigma=0.000606
! Inverting map 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.14751e-05 Jy
! Component: 100  -  total flux cleaned = 7.20131e-05 Jy
! Component: 150  -  total flux cleaned = 7.17141e-05 Jy
! Component: 200  -  total flux cleaned = 4.52703e-05 Jy
! Total flux subtracted in 200 components = 4.52703e-05 Jy
! Clean residual min=-0.001832 max=0.001934 Jy/beam
! Clean residual mean=-0.000007 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.68293 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 95 components and 0.68293 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081398Jy  sigma=0.000606
! Fit after  self-cal, rms=0.081398Jy  sigma=0.000606
! Inverting map 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081398Jy  sigma=0.000606
! Fit after  self-cal, rms=0.081402Jy  sigma=0.000606
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=0.806 mas, bmaj=0.9709 mas, bpa=19 degrees
! Estimated noise=1319.7 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.39831 Jy
! Component: 100  -  total flux cleaned = 0.533318 Jy
! Component: 150  -  total flux cleaned = 0.598852 Jy
! Component: 200  -  total flux cleaned = 0.633665 Jy
! Total flux subtracted in 200 components = 0.633665 Jy
! Clean residual min=-0.006796 max=0.016829 Jy/beam
! Clean residual mean=-0.000013 rms=0.002052 Jy/beam
! Combined flux in latest and established models = 0.633665 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.633665 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=1.008 mas, bmaj=1.239 mas, bpa=16.49 degrees
! Estimated noise=837.809 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0234954 Jy
! Component: 100  -  total flux cleaned = 0.035218 Jy
! Component: 150  -  total flux cleaned = 0.0415356 Jy
! Component: 200  -  total flux cleaned = 0.0453225 Jy
! Total flux subtracted in 200 components = 0.0453225 Jy
! Clean residual min=-0.002649 max=0.002300 Jy/beam
! Clean residual mean=-0.000009 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.678988 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 28 components and 0.678988 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=2.399 mas, bmaj=2.743 mas, bpa=25.51 degrees
! Estimated noise=1064.16 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00197779 Jy
! Component: 100  -  total flux cleaned = 0.00266251 Jy
! Component: 150  -  total flux cleaned = 0.00289163 Jy
! Component: 200  -  total flux cleaned = 0.00311486 Jy
! Total flux subtracted in 200 components = 0.00311486 Jy
! Clean residual min=-0.001758 max=0.001922 Jy/beam
! Clean residual mean=-0.000015 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.682103 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000176814 Jy
! Component: 100  -  total flux cleaned = 0.000319262 Jy
! Component: 150  -  total flux cleaned = 0.000414546 Jy
! Component: 200  -  total flux cleaned = 0.00051524 Jy
! Total flux subtracted in 200 components = 0.00051524 Jy
! Clean residual min=-0.001678 max=0.002010 Jy/beam
! Clean residual mean=-0.000013 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.682618 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 83 components and 0.682618 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! Estimated beam: bmin=1.008 mas, bmaj=1.239 mas, bpa=16.49 degrees
! Estimated noise=837.809 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000148131 Jy
! Component: 100  -  total flux cleaned = 0.00020779 Jy
! Component: 150  -  total flux cleaned = 0.000265679 Jy
! Component: 200  -  total flux cleaned = 0.000320685 Jy
! Total flux subtracted in 200 components = 0.000320685 Jy
! Clean residual min=-0.002153 max=0.001947 Jy/beam
! Clean residual mean=-0.000005 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.682938 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 98 components and 0.682938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081493Jy  sigma=0.000607
! Fit after  self-cal, rms=0.081488Jy  sigma=0.000607
wmodel J0726+7911_X_2017_05_01_pus_map.mod
! Writing 98 model components to file: J0726+7911_X_2017_05_01_pus_map.mod
wobs J0726+7911_X_2017_05_01_pus_uvs.fits
! Writing UV FITS file: J0726+7911_X_2017_05_01_pus_uvs.fits
wwins J0726+7911_X_2017_05_01_pus_map.win
! wwins: Wrote 3 windows to J0726+7911_X_2017_05_01_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 2.85918e-05 Jy
! Component: 100  -  total flux cleaned = -3.98826e-05 Jy
! Component: 150  -  total flux cleaned = -7.31369e-05 Jy
! Component: 200  -  total flux cleaned = -1.08274e-05 Jy
! Component: 250  -  total flux cleaned = 8.01305e-05 Jy
! Component: 300  -  total flux cleaned = 2.08732e-05 Jy
! Component: 350  -  total flux cleaned = 2.07283e-05 Jy
! Component: 400  -  total flux cleaned = -6.3394e-05 Jy
! Component: 450  -  total flux cleaned = -8.99666e-05 Jy
! Component: 500  -  total flux cleaned = -0.000117017 Jy
! Component: 550  -  total flux cleaned = -6.4871e-05 Jy
! Component: 600  -  total flux cleaned = -6.53358e-05 Jy
! Component: 650  -  total flux cleaned = -4.01765e-05 Jy
! Component: 700  -  total flux cleaned = -4.05752e-05 Jy
! Component: 750  -  total flux cleaned = -0.000163284 Jy
! Component: 800  -  total flux cleaned = -0.000235537 Jy
! Component: 850  -  total flux cleaned = -0.000259443 Jy
! Component: 900  -  total flux cleaned = -0.000400027 Jy
! Component: 950  -  total flux cleaned = -0.000422691 Jy
! Component: 1000  -  total flux cleaned = -0.000468379 Jy
! Component: 1050  -  total flux cleaned = -0.00058085 Jy
! Component: 1100  -  total flux cleaned = -0.000603446 Jy
! Component: 1150  -  total flux cleaned = -0.000735015 Jy
! Component: 1200  -  total flux cleaned = -0.000799694 Jy
! Component: 1250  -  total flux cleaned = -0.000863561 Jy
! Component: 1300  -  total flux cleaned = -0.000947941 Jy
! Component: 1350  -  total flux cleaned = -0.00094792 Jy
! Component: 1400  -  total flux cleaned = -0.0010307 Jy
! Component: 1450  -  total flux cleaned = -0.00111222 Jy
! Component: 1500  -  total flux cleaned = -0.00113222 Jy
! Component: 1550  -  total flux cleaned = -0.00119237 Jy
! Component: 1600  -  total flux cleaned = -0.00133095 Jy
! Component: 1650  -  total flux cleaned = -0.00137002 Jy
! Component: 1700  -  total flux cleaned = -0.00146656 Jy
! Component: 1750  -  total flux cleaned = -0.00148537 Jy
! Component: 1800  -  total flux cleaned = -0.00144745 Jy
! Component: 1850  -  total flux cleaned = -0.00156026 Jy
! Component: 1900  -  total flux cleaned = -0.00159762 Jy
! Component: 1950  -  total flux cleaned = -0.00163445 Jy
! Component: 2000  -  total flux cleaned = -0.00167101 Jy
! Total flux subtracted in 2048 components = -0.00176139 Jy
! Clean residual min=-0.001116 max=0.001104 Jy/beam
! Clean residual mean=-0.000001 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.681177 Jy
keep
! Adding 132 model components to the UV plane model.
! The established model now contains 230 components and 0.681177 Jy
![Exited script file: muppet]
wmap "J0726+7911_X_2017_05_01_pus\_map.fits"
! Inverting map 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.008 x 1.239 at 16.49 degrees (North through East)
! Clean map  min=-0.0023725  max=0.53935 Jy/beam
! Writing clean map to FITS file: J0726+7911_X_2017_05_01_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.539347 
invert
! Inverting map 
! Your choice of large map pixels excluded 0.0923% of the data.
!  The x-axis pixel size should ideally be below 0.1996 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000316174 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.175865 0.175865 0.35173 0.70346 1.40692 2.81384 5.62768 11.2554 22.5107 45.0214 90.0429
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0009 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.539 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.008 x 1.239 at 16.49 degrees (North through East)
! Clean map  min=-0.0023725  max=0.53935 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J0726+7911_X_2017_05_01_pus_uvs.log closed on Wed May  1 19:53:57 2019