! Started logfile: J0726+0636_S_2017_02_24_pus_uvs.log on Sat May 4 11:20:36 2019 obs J0726+0636_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J0726+0636_S_2017_02_24_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.83545 visibilities/baseline/integration-bin. ! Found source: J0726+0636 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 12632 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0726+0636_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 329 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.802858Jy sigma=0.011586 ! Fit after self-cal, rms=0.796887Jy sigma=0.011555 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=7.163 mas, bpa=2.156 degrees ! Estimated noise=952.965 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.15347 Jy ! Component: 100 - total flux cleaned = 0.186937 Jy ! Total flux subtracted in 100 components = 0.186937 Jy ! Clean residual min=-0.006940 max=0.010540 Jy/beam ! Clean residual mean=0.000010 rms=0.002124 Jy/beam ! Combined flux in latest and established models = 0.186937 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.186937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098171Jy sigma=0.001800 ! Fit after self-cal, rms=0.098161Jy sigma=0.001800 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.549 mas, bmaj=7.966 mas, bpa=1.271 degrees ! Estimated noise=752.319 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00940827 Jy ! Component: 100 - total flux cleaned = 0.0118508 Jy ! Component: 150 - total flux cleaned = 0.0119912 Jy ! Component: 200 - total flux cleaned = 0.0119059 Jy ! Total flux subtracted in 200 components = 0.0119059 Jy ! Clean residual min=-0.007154 max=0.010007 Jy/beam ! Clean residual mean=0.000014 rms=0.002067 Jy/beam ! Combined flux in latest and established models = 0.198843 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 10 components and 0.198843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097811Jy sigma=0.001751 ! Fit after self-cal, rms=0.097811Jy sigma=0.001751 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.19 HN 0.94 KP 0.97 ! LA 0.94 MK 0.83 NL 0.99 OV 1.03 ! PT 0.98 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.07 HN 0.99 KP 0.94 ! LA 0.92 MK 15.95 NL 0.98 OV 1.06 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.07 HN 0.96 KP 1.00 ! LA 1.02 MK 0.79 NL 1.10 OV 0.97 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.15 HN 0.87 KP 1.00* ! LA 0.95 MK 0.92 NL 1.00* OV 0.99 ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.097811Jy sigma=0.001751 ! Fit after self-cal, rms=0.806435Jy sigma=0.000752 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.672 mas, bmaj=8.057 mas, bpa=4.157 degrees ! Estimated noise=787.391 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133453 Jy ! Component: 100 - total flux cleaned = -0.000181114 Jy ! Component: 150 - total flux cleaned = -0.00113611 Jy ! Component: 200 - total flux cleaned = -0.00154034 Jy ! Total flux subtracted in 200 components = -0.00154034 Jy ! Clean residual min=-0.006250 max=0.006819 Jy/beam ! Clean residual mean=0.000006 rms=0.001729 Jy/beam ! Combined flux in latest and established models = 0.197302 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 16 components and 0.197302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.802583Jy sigma=0.000756 ! Fit after self-cal, rms=0.802791Jy sigma=0.000754 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.802791Jy sigma=0.000754 ! Fit after self-cal, rms=1.255198Jy sigma=0.000725 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.745 mas, bmaj=8.155 mas, bpa=5.622 degrees ! Estimated noise=808.303 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117232 Jy ! Component: 100 - total flux cleaned = 4.25236e-05 Jy ! Component: 150 - total flux cleaned = -0.000900614 Jy ! Component: 200 - total flux cleaned = -0.00170301 Jy ! Total flux subtracted in 200 components = -0.00170301 Jy ! Clean residual min=-0.005395 max=0.005401 Jy/beam ! Clean residual mean=0.000005 rms=0.001338 Jy/beam ! Combined flux in latest and established models = 0.195599 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 22 components and 0.195599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.251716Jy sigma=0.000728 ! Fit after self-cal, rms=1.251713Jy sigma=0.000728 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000697373 Jy ! Component: 100 - total flux cleaned = -0.00115052 Jy ! Component: 150 - total flux cleaned = -0.00115847 Jy ! Component: 200 - total flux cleaned = -0.00102706 Jy ! Total flux subtracted in 200 components = -0.00102706 Jy ! Clean residual min=-0.005446 max=0.005693 Jy/beam ! Clean residual mean=0.000005 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.194572 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 24 components and 0.194572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.250324Jy sigma=0.000731 ! Fit after self-cal, rms=1.250323Jy sigma=0.000731 ! Inverting map ! Added new window around map position (92, 89.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.53621e-05 Jy ! Component: 100 - total flux cleaned = -0.000246806 Jy ! Component: 150 - total flux cleaned = 9.48489e-05 Jy ! Component: 200 - total flux cleaned = 0.00025206 Jy ! Total flux subtracted in 200 components = 0.00025206 Jy ! Clean residual min=-0.005659 max=0.005476 Jy/beam ! Clean residual mean=0.000006 rms=0.001325 Jy/beam ! Combined flux in latest and established models = 0.194824 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.194824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.248848Jy sigma=0.000731 ! Fit after self-cal, rms=1.248832Jy sigma=0.000730 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.248832Jy sigma=0.000730 ! Fit after self-cal, rms=1.195812Jy sigma=0.000686 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.701 mas, bmaj=8.113 mas, bpa=5.299 degrees ! Estimated noise=813.023 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223571 Jy ! Component: 100 - total flux cleaned = 0.00248537 Jy ! Component: 150 - total flux cleaned = 0.00263214 Jy ! Component: 200 - total flux cleaned = 0.00269884 Jy ! Total flux subtracted in 200 components = 0.00269884 Jy ! Clean residual min=-0.003456 max=0.003949 Jy/beam ! Clean residual mean=0.000003 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.197523 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 52 components and 0.197523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.195287Jy sigma=0.000686 ! Fit after self-cal, rms=1.195285Jy sigma=0.000685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.7801e-06 Jy ! Component: 100 - total flux cleaned = 1.43156e-06 Jy ! Component: 150 - total flux cleaned = 8.39967e-07 Jy ! Component: 200 - total flux cleaned = 1.44843e-06 Jy ! Total flux subtracted in 200 components = 1.44843e-06 Jy ! Clean residual min=-0.003434 max=0.003864 Jy/beam ! Clean residual mean=0.000003 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.197525 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 59 components and 0.197525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.194998Jy sigma=0.000686 ! Fit after self-cal, rms=1.194998Jy sigma=0.000686 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.194998Jy sigma=0.000686 ! Fit after self-cal, rms=1.235142Jy sigma=0.000685 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.711 mas, bmaj=11.26 mas, bpa=2.856 degrees ! Estimated noise=955.416 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202407 Jy ! Component: 100 - total flux cleaned = 0.00260441 Jy ! Component: 150 - total flux cleaned = 0.00277273 Jy ! Component: 200 - total flux cleaned = 0.00291566 Jy ! Total flux subtracted in 200 components = 0.00291566 Jy ! Clean residual min=-0.002460 max=0.004001 Jy/beam ! Clean residual mean=0.000008 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.20044 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 77 components and 0.20044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.235002Jy sigma=0.000685 ! Fit after self-cal, rms=1.234999Jy sigma=0.000685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (58.5, -59). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00370712 Jy ! Component: 100 - total flux cleaned = 0.00573154 Jy ! Component: 150 - total flux cleaned = 0.00709189 Jy ! Component: 200 - total flux cleaned = 0.00775229 Jy ! Total flux subtracted in 200 components = 0.00775229 Jy ! Clean residual min=-0.002225 max=0.002524 Jy/beam ! Clean residual mean=0.000001 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.208193 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 112 components and 0.208193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.234770Jy sigma=0.000684 ! Fit after self-cal, rms=1.234765Jy sigma=0.000684 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.703 mas, bmaj=8.112 mas, bpa=5.459 degrees ! Estimated noise=821.451 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.703 x 8.112 at 5.459 degrees (North through East) ! Clean map min=-0.0043667 max=0.21486 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=7.232 mas, bpa=5.345 degrees ! Estimated noise=1041.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.167714 Jy ! Component: 100 - total flux cleaned = 0.204286 Jy ! Component: 150 - total flux cleaned = 0.204789 Jy ! Component: 200 - total flux cleaned = 0.203454 Jy ! Total flux subtracted in 200 components = 0.203454 Jy ! Clean residual min=-0.004897 max=0.004914 Jy/beam ! Clean residual mean=-0.000002 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 0.203454 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.203454 Jy ! Inverting map and beam ! Estimated beam: bmin=3.703 mas, bmaj=8.112 mas, bpa=5.459 degrees ! Estimated noise=821.451 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000486398 Jy ! Component: 100 - total flux cleaned = 0.000474437 Jy ! Component: 150 - total flux cleaned = 0.00100662 Jy ! Component: 200 - total flux cleaned = 0.00180352 Jy ! Total flux subtracted in 200 components = 0.00180352 Jy ! Clean residual min=-0.003703 max=0.003335 Jy/beam ! Clean residual mean=0.000001 rms=0.000944 Jy/beam ! Combined flux in latest and established models = 0.205257 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 20 components and 0.205257 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.711 mas, bmaj=11.26 mas, bpa=2.856 degrees ! Estimated noise=955.416 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159695 Jy ! Component: 100 - total flux cleaned = 0.00265992 Jy ! Component: 150 - total flux cleaned = 0.00356375 Jy ! Component: 200 - total flux cleaned = 0.00429379 Jy ! Total flux subtracted in 200 components = 0.00429379 Jy ! Clean residual min=-0.002598 max=0.002672 Jy/beam ! Clean residual mean=-0.000001 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.209551 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000274237 Jy ! Component: 100 - total flux cleaned = 0.000677146 Jy ! Component: 150 - total flux cleaned = 0.000955937 Jy ! Component: 200 - total flux cleaned = 0.00126102 Jy ! Total flux subtracted in 200 components = 0.00126102 Jy ! Clean residual min=-0.002476 max=0.002458 Jy/beam ! Clean residual mean=-0.000001 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.210812 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 71 components and 0.210812 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.703 mas, bmaj=8.112 mas, bpa=5.459 degrees ! Estimated noise=821.451 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.73357e-05 Jy ! Component: 100 - total flux cleaned = -0.000598838 Jy ! Component: 150 - total flux cleaned = -0.000805332 Jy ! Component: 200 - total flux cleaned = -0.000906108 Jy ! Total flux subtracted in 200 components = -0.000906108 Jy ! Clean residual min=-0.003649 max=0.003381 Jy/beam ! Clean residual mean=-0.000001 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.209906 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 93 components and 0.209906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.235229Jy sigma=0.000684 ! Fit after self-cal, rms=1.235226Jy sigma=0.000684 wmodel J0726+0636_S_2017_02_24_pus_map.mod ! Writing 93 model components to file: J0726+0636_S_2017_02_24_pus_map.mod wobs J0726+0636_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J0726+0636_S_2017_02_24_pus_uvs.fits wwins J0726+0636_S_2017_02_24_pus_map.win ! wwins: Wrote 3 windows to J0726+0636_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000398223 Jy ! Component: 100 - total flux cleaned = -0.000691516 Jy ! Component: 150 - total flux cleaned = -0.000917394 Jy ! Component: 200 - total flux cleaned = -0.000973656 Jy ! Component: 250 - total flux cleaned = -0.00108198 Jy ! Component: 300 - total flux cleaned = -0.0012937 Jy ! Component: 350 - total flux cleaned = -0.00139822 Jy ! Component: 400 - total flux cleaned = -0.00160303 Jy ! Component: 450 - total flux cleaned = -0.00175427 Jy ! Component: 500 - total flux cleaned = -0.00185326 Jy ! Component: 550 - total flux cleaned = -0.00200029 Jy ! Component: 600 - total flux cleaned = -0.00214543 Jy ! Component: 650 - total flux cleaned = -0.00233702 Jy ! Component: 700 - total flux cleaned = -0.00243173 Jy ! Component: 750 - total flux cleaned = -0.00261965 Jy ! Component: 800 - total flux cleaned = -0.0027592 Jy ! Component: 850 - total flux cleaned = -0.00280522 Jy ! Component: 900 - total flux cleaned = -0.00285077 Jy ! Component: 950 - total flux cleaned = -0.0029866 Jy ! Component: 1000 - total flux cleaned = -0.00312147 Jy ! Component: 1050 - total flux cleaned = -0.00316586 Jy ! Component: 1100 - total flux cleaned = -0.00316601 Jy ! Component: 1150 - total flux cleaned = -0.00321 Jy ! Component: 1200 - total flux cleaned = -0.00325357 Jy ! Component: 1250 - total flux cleaned = -0.00338302 Jy ! Component: 1300 - total flux cleaned = -0.00338292 Jy ! Component: 1350 - total flux cleaned = -0.0035528 Jy ! Component: 1400 - total flux cleaned = -0.00355253 Jy ! Component: 1450 - total flux cleaned = -0.00355235 Jy ! Component: 1500 - total flux cleaned = -0.00355262 Jy ! Component: 1550 - total flux cleaned = -0.00351126 Jy ! Component: 1600 - total flux cleaned = -0.00355259 Jy ! Component: 1650 - total flux cleaned = -0.00359347 Jy ! Component: 1700 - total flux cleaned = -0.00363399 Jy ! Component: 1750 - total flux cleaned = -0.00359363 Jy ! Component: 1800 - total flux cleaned = -0.00355349 Jy ! Component: 1850 - total flux cleaned = -0.00359335 Jy ! Component: 1900 - total flux cleaned = -0.0035533 Jy ! Component: 1950 - total flux cleaned = -0.00355324 Jy ! Component: 2000 - total flux cleaned = -0.0035532 Jy ! Component: 2050 - total flux cleaned = -0.00351389 Jy ! Component: 2100 - total flux cleaned = -0.00351381 Jy ! Component: 2150 - total flux cleaned = -0.00347487 Jy ! Component: 2200 - total flux cleaned = -0.00351336 Jy ! Component: 2250 - total flux cleaned = -0.00351318 Jy ! Component: 2300 - total flux cleaned = -0.00347483 Jy ! Component: 2350 - total flux cleaned = -0.00355094 Jy ! Component: 2400 - total flux cleaned = -0.00355108 Jy ! Component: 2450 - total flux cleaned = -0.00358871 Jy ! Component: 2500 - total flux cleaned = -0.00358887 Jy ! Component: 2550 - total flux cleaned = -0.00358887 Jy ! Component: 2600 - total flux cleaned = -0.00373823 Jy ! Component: 2650 - total flux cleaned = -0.00370101 Jy ! Component: 2700 - total flux cleaned = -0.00381193 Jy ! Component: 2750 - total flux cleaned = -0.00381181 Jy ! Component: 2800 - total flux cleaned = -0.00381176 Jy ! Component: 2850 - total flux cleaned = -0.00392131 Jy ! Component: 2900 - total flux cleaned = -0.00388477 Jy ! Component: 2950 - total flux cleaned = -0.00388486 Jy ! Component: 3000 - total flux cleaned = -0.00395709 Jy ! Component: 3050 - total flux cleaned = -0.00399312 Jy ! Component: 3100 - total flux cleaned = -0.00402889 Jy ! Component: 3150 - total flux cleaned = -0.00406472 Jy ! Component: 3200 - total flux cleaned = -0.00410026 Jy ! Component: 3250 - total flux cleaned = -0.00406487 Jy ! Component: 3300 - total flux cleaned = -0.00406484 Jy ! Component: 3350 - total flux cleaned = -0.00410002 Jy ! Component: 3400 - total flux cleaned = -0.00403008 Jy ! Component: 3450 - total flux cleaned = -0.00406509 Jy ! Component: 3500 - total flux cleaned = -0.00406509 Jy ! Component: 3550 - total flux cleaned = -0.00409989 Jy ! Component: 3600 - total flux cleaned = -0.00413441 Jy ! Component: 3650 - total flux cleaned = -0.00413436 Jy ! Component: 3700 - total flux cleaned = -0.00410011 Jy ! Component: 3750 - total flux cleaned = -0.00416843 Jy ! Component: 3800 - total flux cleaned = -0.00416824 Jy ! Component: 3850 - total flux cleaned = -0.0041683 Jy ! Component: 3900 - total flux cleaned = -0.00416828 Jy ! Component: 3950 - total flux cleaned = -0.00416835 Jy ! Component: 4000 - total flux cleaned = -0.00416841 Jy ! Component: 4050 - total flux cleaned = -0.00420196 Jy ! Total flux subtracted in 4096 components = -0.00416843 Jy ! Clean residual min=-0.002134 max=0.001850 Jy/beam ! Clean residual mean=-0.000001 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.205737 Jy keep ! Adding 240 model components to the UV plane model. ! The established model now contains 332 components and 0.205737 Jy ![Exited script file: muppet] wmap "J0726+0636_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.703 x 8.112 at 5.459 degrees (North through East) ! Clean map min=-0.0035859 max=0.21519 Jy/beam ! Writing clean map to FITS file: J0726+0636_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.215192 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000612717 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.85419 0.85419 1.70838 3.41676 6.83352 13.667 27.3341 54.6682 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.215 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.703 x 8.112 at 5.459 degrees (North through East) ! Clean map min=-0.0035859 max=0.21519 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0726+0636_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:20:41 2019