! Started logfile: J0724+0308_S_2017_02_24_pus_uvs.log on Sat May 4 11:20:30 2019 obs J0724+0308_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J0724+0308_S_2017_02_24_pus_uva.fits ! AN table 1: 172 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.853876 visibilities/baseline/integration-bin. ! Found source: J0724+0308 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 26436 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0724+0308_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 136 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 136 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 136 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 653 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.954488Jy sigma=0.008022 ! Fit after self-cal, rms=0.936188Jy sigma=0.007910 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=7.162 mas, bpa=2.19 degrees ! Estimated noise=946.765 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0517339 Jy ! Component: 100 - total flux cleaned = 0.0635462 Jy ! Total flux subtracted in 100 components = 0.0635462 Jy ! Clean residual min=-0.002781 max=0.004153 Jy/beam ! Clean residual mean=0.000004 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.0635462 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0635462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090600Jy sigma=0.000674 ! Fit after self-cal, rms=0.090503Jy sigma=0.000673 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=8.052 mas, bpa=2.026 degrees ! Estimated noise=569.271 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438181 Jy ! Component: 100 - total flux cleaned = 0.00593238 Jy ! Component: 150 - total flux cleaned = 0.00634961 Jy ! Component: 200 - total flux cleaned = 0.00639243 Jy ! Total flux subtracted in 200 components = 0.00639243 Jy ! Clean residual min=-0.002091 max=0.002439 Jy/beam ! Clean residual mean=0.000005 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.0699387 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 21 components and 0.0699387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090279Jy sigma=0.000672 ! Fit after self-cal, rms=0.090298Jy sigma=0.000672 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.08 HN 1.05 KP 0.96 ! LA 1.01 MK 1.02 NL 1.02 OV 1.04 ! PT 1.03 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.12 KP 0.95 ! LA 0.93 MK 1.03 NL 0.95 OV 1.09 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.04 KP 1.03 ! LA 1.03 MK 1.01 NL 1.07 OV 1.00 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.12 HN 0.89 KP 1.00* ! LA 0.93 MK 0.92 NL 1.00* OV 0.92 ! PT 0.91 SC 1.00* ! ! ! Fit before self-cal, rms=0.090298Jy sigma=0.000672 ! Fit after self-cal, rms=0.089973Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.614 mas, bmaj=8.033 mas, bpa=2.452 degrees ! Estimated noise=574.985 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00090291 Jy ! Component: 100 - total flux cleaned = 0.00108625 Jy ! Component: 150 - total flux cleaned = 0.00110606 Jy ! Component: 200 - total flux cleaned = 0.00108901 Jy ! Total flux subtracted in 200 components = 0.00108901 Jy ! Clean residual min=-0.002126 max=0.002277 Jy/beam ! Clean residual mean=0.000004 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0710277 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 0.0710277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089956Jy sigma=0.000670 ! Fit after self-cal, rms=0.089944Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089944Jy sigma=0.000670 ! Fit after self-cal, rms=0.088220Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.624 mas, bmaj=8.031 mas, bpa=2.875 degrees ! Estimated noise=578.637 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000597392 Jy ! Component: 100 - total flux cleaned = 0.000705706 Jy ! Component: 150 - total flux cleaned = 0.000707213 Jy ! Component: 200 - total flux cleaned = 0.000683464 Jy ! Total flux subtracted in 200 components = 0.000683464 Jy ! Clean residual min=-0.001881 max=0.002193 Jy/beam ! Clean residual mean=0.000003 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.0717111 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.0717111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088215Jy sigma=0.000668 ! Fit after self-cal, rms=0.088193Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, 26.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216283 Jy ! Component: 100 - total flux cleaned = 0.00332687 Jy ! Component: 150 - total flux cleaned = 0.00391789 Jy ! Component: 200 - total flux cleaned = 0.00404233 Jy ! Total flux subtracted in 200 components = 0.00404233 Jy ! Clean residual min=-0.001633 max=0.001749 Jy/beam ! Clean residual mean=0.000003 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.0757535 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 59 components and 0.0757535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088133Jy sigma=0.000667 ! Fit after self-cal, rms=0.088122Jy sigma=0.000667 ! Inverting map ! Added new window around map position (45, -16.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162898 Jy ! Component: 100 - total flux cleaned = 0.00262179 Jy ! Component: 150 - total flux cleaned = 0.00324861 Jy ! Component: 200 - total flux cleaned = 0.00343468 Jy ! Total flux subtracted in 200 components = 0.00343468 Jy ! Clean residual min=-0.001529 max=0.001571 Jy/beam ! Clean residual mean=0.000003 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.0791882 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 81 components and 0.0791882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088083Jy sigma=0.000667 ! Fit after self-cal, rms=0.088077Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088077Jy sigma=0.000667 ! Fit after self-cal, rms=0.087235Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.613 mas, bmaj=8.015 mas, bpa=2.918 degrees ! Estimated noise=576.344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000826515 Jy ! Component: 100 - total flux cleaned = 0.00104243 Jy ! Component: 150 - total flux cleaned = 0.00108841 Jy ! Component: 200 - total flux cleaned = 0.00108773 Jy ! Total flux subtracted in 200 components = 0.00108773 Jy ! Clean residual min=-0.001516 max=0.001494 Jy/beam ! Clean residual mean=0.000003 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.0802759 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 95 components and 0.0802759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087219Jy sigma=0.000666 ! Fit after self-cal, rms=0.087219Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000346982 Jy ! Component: 100 - total flux cleaned = 0.000367234 Jy ! Component: 150 - total flux cleaned = 0.000385617 Jy ! Component: 200 - total flux cleaned = 0.000403498 Jy ! Total flux subtracted in 200 components = 0.000403498 Jy ! Clean residual min=-0.001524 max=0.001477 Jy/beam ! Clean residual mean=0.000003 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.0806794 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 102 components and 0.0806794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087211Jy sigma=0.000666 ! Fit after self-cal, rms=0.087211Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087211Jy sigma=0.000666 ! Fit after self-cal, rms=0.087248Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.56 mas, bmaj=11.5 mas, bpa=0.5163 degrees ! Estimated noise=689.997 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000494206 Jy ! Component: 100 - total flux cleaned = 0.000812777 Jy ! Component: 150 - total flux cleaned = 0.000983452 Jy ! Component: 200 - total flux cleaned = 0.00111601 Jy ! Total flux subtracted in 200 components = 0.00111601 Jy ! Clean residual min=-0.001449 max=0.001722 Jy/beam ! Clean residual mean=0.000004 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.0817954 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 119 components and 0.0817954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087247Jy sigma=0.000666 ! Fit after self-cal, rms=0.087255Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194987 Jy ! Component: 100 - total flux cleaned = 0.000287757 Jy ! Component: 150 - total flux cleaned = 0.000330407 Jy ! Component: 200 - total flux cleaned = 0.000395029 Jy ! Total flux subtracted in 200 components = 0.000395029 Jy ! Clean residual min=-0.001432 max=0.001712 Jy/beam ! Clean residual mean=0.000004 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0821905 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 130 components and 0.0821905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087256Jy sigma=0.000666 ! Fit after self-cal, rms=0.087258Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=8.011 mas, bpa=2.91 degrees ! Estimated noise=576.204 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.608 x 8.011 at 2.91 degrees (North through East) ! Clean map min=-0.0015282 max=0.067937 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.053 mas, bmaj=7.118 mas, bpa=3.129 degrees ! Estimated noise=958.972 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.052292 Jy ! Component: 100 - total flux cleaned = 0.0643652 Jy ! Component: 150 - total flux cleaned = 0.0687283 Jy ! Component: 200 - total flux cleaned = 0.071697 Jy ! Total flux subtracted in 200 components = 0.071697 Jy ! Clean residual min=-0.002526 max=0.002703 Jy/beam ! Clean residual mean=0.000002 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.071697 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.071697 Jy ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=8.011 mas, bpa=2.91 degrees ! Estimated noise=576.204 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00290452 Jy ! Component: 100 - total flux cleaned = 0.0048954 Jy ! Component: 150 - total flux cleaned = 0.00641476 Jy ! Component: 200 - total flux cleaned = 0.00762276 Jy ! Total flux subtracted in 200 components = 0.00762276 Jy ! Clean residual min=-0.001591 max=0.001594 Jy/beam ! Clean residual mean=0.000004 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.0793198 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 38 components and 0.0793198 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.56 mas, bmaj=11.5 mas, bpa=0.5163 degrees ! Estimated noise=689.997 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000875776 Jy ! Component: 100 - total flux cleaned = 0.00147781 Jy ! Component: 150 - total flux cleaned = 0.00197281 Jy ! Component: 200 - total flux cleaned = 0.00236358 Jy ! Total flux subtracted in 200 components = 0.00236358 Jy ! Clean residual min=-0.001522 max=0.001724 Jy/beam ! Clean residual mean=0.000005 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.0816833 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000310215 Jy ! Component: 100 - total flux cleaned = 0.000539362 Jy ! Component: 150 - total flux cleaned = 0.000669518 Jy ! Component: 200 - total flux cleaned = 0.000754295 Jy ! Total flux subtracted in 200 components = 0.000754295 Jy ! Clean residual min=-0.001475 max=0.001715 Jy/beam ! Clean residual mean=0.000004 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.0824376 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 80 components and 0.0824376 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=8.011 mas, bpa=2.91 degrees ! Estimated noise=576.204 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.26041e-05 Jy ! Component: 100 - total flux cleaned = -7.06151e-05 Jy ! Component: 150 - total flux cleaned = -7.01081e-05 Jy ! Component: 200 - total flux cleaned = -4.615e-05 Jy ! Total flux subtracted in 200 components = -4.615e-05 Jy ! Clean residual min=-0.001560 max=0.001490 Jy/beam ! Clean residual mean=0.000002 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.0823915 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 104 components and 0.0823915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087277Jy sigma=0.000666 ! Fit after self-cal, rms=0.087270Jy sigma=0.000666 wmodel J0724+0308_S_2017_02_24_pus_map.mod ! Writing 104 model components to file: J0724+0308_S_2017_02_24_pus_map.mod wobs J0724+0308_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J0724+0308_S_2017_02_24_pus_uvs.fits wwins J0724+0308_S_2017_02_24_pus_map.win ! wwins: Wrote 3 windows to J0724+0308_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000163687 Jy ! Component: 100 - total flux cleaned = 0.000238362 Jy ! Component: 150 - total flux cleaned = 0.000308328 Jy ! Component: 200 - total flux cleaned = 0.000397742 Jy ! Component: 250 - total flux cleaned = 0.000376502 Jy ! Component: 300 - total flux cleaned = 0.000376615 Jy ! Component: 350 - total flux cleaned = 0.000356241 Jy ! Component: 400 - total flux cleaned = 0.000316162 Jy ! Component: 450 - total flux cleaned = 0.000316221 Jy ! Component: 500 - total flux cleaned = 0.000373406 Jy ! Component: 550 - total flux cleaned = 0.00046682 Jy ! Component: 600 - total flux cleaned = 0.000540068 Jy ! Component: 650 - total flux cleaned = 0.000540154 Jy ! Component: 700 - total flux cleaned = 0.000522372 Jy ! Component: 750 - total flux cleaned = 0.000556949 Jy ! Component: 800 - total flux cleaned = 0.000573998 Jy ! Component: 850 - total flux cleaned = 0.000573973 Jy ! Component: 900 - total flux cleaned = 0.000657369 Jy ! Component: 950 - total flux cleaned = 0.000723056 Jy ! Component: 1000 - total flux cleaned = 0.000739106 Jy ! Component: 1050 - total flux cleaned = 0.000739101 Jy ! Component: 1100 - total flux cleaned = 0.000755391 Jy ! Component: 1150 - total flux cleaned = 0.00078722 Jy ! Component: 1200 - total flux cleaned = 0.0008493 Jy ! Component: 1250 - total flux cleaned = 0.000880148 Jy ! Component: 1300 - total flux cleaned = 0.000940543 Jy ! Component: 1350 - total flux cleaned = 0.000970303 Jy ! Component: 1400 - total flux cleaned = 0.000984893 Jy ! Component: 1450 - total flux cleaned = 0.00104348 Jy ! Component: 1500 - total flux cleaned = 0.00113036 Jy ! Component: 1550 - total flux cleaned = 0.00114481 Jy ! Component: 1600 - total flux cleaned = 0.00123015 Jy ! Component: 1650 - total flux cleaned = 0.00124427 Jy ! Component: 1700 - total flux cleaned = 0.00131403 Jy ! Component: 1750 - total flux cleaned = 0.00138299 Jy ! Component: 1800 - total flux cleaned = 0.00141019 Jy ! Component: 1850 - total flux cleaned = 0.00141023 Jy ! Component: 1900 - total flux cleaned = 0.00143679 Jy ! Component: 1950 - total flux cleaned = 0.00142369 Jy ! Component: 2000 - total flux cleaned = 0.00147629 Jy ! Component: 2050 - total flux cleaned = 0.00154141 Jy ! Component: 2100 - total flux cleaned = 0.00148965 Jy ! Component: 2150 - total flux cleaned = 0.0015281 Jy ! Component: 2200 - total flux cleaned = 0.00156633 Jy ! Component: 2250 - total flux cleaned = 0.00159153 Jy ! Component: 2300 - total flux cleaned = 0.00157907 Jy ! Component: 2350 - total flux cleaned = 0.00161617 Jy ! Component: 2400 - total flux cleaned = 0.00164106 Jy ! Component: 2450 - total flux cleaned = 0.00172649 Jy ! Component: 2500 - total flux cleaned = 0.00172656 Jy ! Component: 2550 - total flux cleaned = 0.00178657 Jy ! Component: 2600 - total flux cleaned = 0.00181047 Jy ! Component: 2650 - total flux cleaned = 0.00183421 Jy ! Component: 2700 - total flux cleaned = 0.00183413 Jy ! Component: 2750 - total flux cleaned = 0.00183419 Jy ! Component: 2800 - total flux cleaned = 0.00185755 Jy ! Component: 2850 - total flux cleaned = 0.00191509 Jy ! Component: 2900 - total flux cleaned = 0.0018923 Jy ! Component: 2950 - total flux cleaned = 0.00194897 Jy ! Component: 3000 - total flux cleaned = 0.00198283 Jy ! Component: 3050 - total flux cleaned = 0.00201634 Jy ! Component: 3100 - total flux cleaned = 0.00203857 Jy ! Component: 3150 - total flux cleaned = 0.0020386 Jy ! Component: 3200 - total flux cleaned = 0.00208239 Jy ! Component: 3250 - total flux cleaned = 0.0020497 Jy ! Component: 3300 - total flux cleaned = 0.00210399 Jy ! Component: 3350 - total flux cleaned = 0.00212557 Jy ! Component: 3400 - total flux cleaned = 0.00220046 Jy ! Component: 3450 - total flux cleaned = 0.00223235 Jy ! Component: 3500 - total flux cleaned = 0.00221126 Jy ! Component: 3550 - total flux cleaned = 0.0022532 Jy ! Component: 3600 - total flux cleaned = 0.00225322 Jy ! Component: 3650 - total flux cleaned = 0.00224296 Jy ! Component: 3700 - total flux cleaned = 0.0022944 Jy ! Component: 3750 - total flux cleaned = 0.00230466 Jy ! Component: 3800 - total flux cleaned = 0.0023047 Jy ! Component: 3850 - total flux cleaned = 0.00232487 Jy ! Component: 3900 - total flux cleaned = 0.00234493 Jy ! Component: 3950 - total flux cleaned = 0.00234499 Jy ! Component: 4000 - total flux cleaned = 0.00234507 Jy ! Component: 4050 - total flux cleaned = 0.00236481 Jy ! Total flux subtracted in 4096 components = 0.00240403 Jy ! Clean residual min=-0.000688 max=0.000514 Jy/beam ! Clean residual mean=0.000001 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.0847955 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 412 components and 0.0847955 Jy ![Exited script file: muppet] wmap "J0724+0308_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.608 x 8.011 at 2.91 degrees (North through East) ! Clean map min=-0.0010744 max=0.067439 Jy/beam ! Writing clean map to FITS file: J0724+0308_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0674391 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000185722 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.826178 0.826178 1.65236 3.30471 6.60943 13.2189 26.4377 52.8754 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.067 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.608 x 8.011 at 2.91 degrees (North through East) ! Clean map min=-0.0010744 max=0.067439 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0724+0308_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:20:36 2019