! Started logfile: J0722-3038_S_2017_09_26_pus_uvs.log on Sat May 11 12:57:11 2019 obs J0722-3038_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0722-3038_S_2017_09_26_pus_uva.fits ! AN table 1: 295 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.588418 visibilities/baseline/integration-bin. ! Found source: J0722-3038 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 24996 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0722-3038_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 709 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 828 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 868 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1863 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.966229Jy sigma=0.005973 ! Fit after self-cal, rms=0.921262Jy sigma=0.005725 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.739 mas, bmaj=11.61 mas, bpa=-22.11 degrees ! Estimated noise=1707.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0564989 Jy ! Component: 100 - total flux cleaned = 0.072705 Jy ! Total flux subtracted in 100 components = 0.072705 Jy ! Clean residual min=-0.006183 max=0.008314 Jy/beam ! Clean residual mean=0.000040 rms=0.001958 Jy/beam ! Combined flux in latest and established models = 0.072705 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.072705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116293Jy sigma=0.000672 ! Fit after self-cal, rms=0.115885Jy sigma=0.000670 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.8 mas, bmaj=14.75 mas, bpa=-19.7 degrees ! Estimated noise=897.368 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.021481 Jy ! Component: 100 - total flux cleaned = 0.0332071 Jy ! Component: 150 - total flux cleaned = 0.0402484 Jy ! Component: 200 - total flux cleaned = 0.0445299 Jy ! Total flux subtracted in 200 components = 0.0445299 Jy ! Clean residual min=-0.003991 max=0.007618 Jy/beam ! Clean residual mean=0.000018 rms=0.001676 Jy/beam ! Combined flux in latest and established models = 0.117235 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 81 components and 0.117235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112208Jy sigma=0.000641 ! Fit after self-cal, rms=0.111938Jy sigma=0.000639 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.97 KP 0.97 ! LA 0.97 MK 1.11 NL 1.39 OV 1.16 ! PT 0.93 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 0.90 KP 0.97 ! LA 0.92 MK 1.14 NL 1.33 OV 1.19 ! PT 0.89 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.89 KP 0.93 ! LA 0.91 MK 1.15 NL 1.18 OV 1.08 ! PT 0.90 ! ! ! Correcting IF 4. ! A total of 123 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.80 KP 1.00* ! LA 0.96 MK 1.07 NL 1.00* OV 0.67 ! PT 0.87 ! ! ! Fit before self-cal, rms=0.111938Jy sigma=0.000639 ! Fit after self-cal, rms=0.116221Jy sigma=0.000633 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.891 mas, bmaj=15.11 mas, bpa=-19.21 degrees ! Estimated noise=907.704 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173352 Jy ! Component: 100 - total flux cleaned = 0.00193448 Jy ! Component: 150 - total flux cleaned = 0.00212768 Jy ! Component: 200 - total flux cleaned = 0.00225803 Jy ! Total flux subtracted in 200 components = 0.00225803 Jy ! Clean residual min=-0.003055 max=0.004409 Jy/beam ! Clean residual mean=0.000006 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.119493 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 92 components and 0.119493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116154Jy sigma=0.000633 ! Fit after self-cal, rms=0.116609Jy sigma=0.000632 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116609Jy sigma=0.000632 ! Fit after self-cal, rms=0.117072Jy sigma=0.000631 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.855 mas, bmaj=15.1 mas, bpa=-19.25 degrees ! Estimated noise=909.231 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117759 Jy ! Component: 100 - total flux cleaned = 0.00136032 Jy ! Component: 150 - total flux cleaned = 0.00147674 Jy ! Component: 200 - total flux cleaned = 0.00152574 Jy ! Total flux subtracted in 200 components = 0.00152574 Jy ! Clean residual min=-0.002616 max=0.003506 Jy/beam ! Clean residual mean=-0.000005 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.121019 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 100 components and 0.121019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117047Jy sigma=0.000631 ! Fit after self-cal, rms=0.117098Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (18.5, 19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00297365 Jy ! Component: 100 - total flux cleaned = 0.00340763 Jy ! Component: 150 - total flux cleaned = 0.00375301 Jy ! Component: 200 - total flux cleaned = 0.00379664 Jy ! Total flux subtracted in 200 components = 0.00379664 Jy ! Clean residual min=-0.002401 max=0.002201 Jy/beam ! Clean residual mean=-0.000004 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.124815 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 122 components and 0.124815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117000Jy sigma=0.000630 ! Fit after self-cal, rms=0.116910Jy sigma=0.000630 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116910Jy sigma=0.000630 ! Fit after self-cal, rms=0.115799Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.814 mas, bmaj=15.05 mas, bpa=-19.15 degrees ! Estimated noise=903.891 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177098 Jy ! Component: 100 - total flux cleaned = 0.00218184 Jy ! Component: 150 - total flux cleaned = 0.00238513 Jy ! Component: 200 - total flux cleaned = 0.00249101 Jy ! Total flux subtracted in 200 components = 0.00249101 Jy ! Clean residual min=-0.002246 max=0.002095 Jy/beam ! Clean residual mean=-0.000002 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.127306 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 135 components and 0.127306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115747Jy sigma=0.000629 ! Fit after self-cal, rms=0.115670Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0006134 Jy ! Component: 100 - total flux cleaned = 0.000652016 Jy ! Component: 150 - total flux cleaned = 0.000689302 Jy ! Component: 200 - total flux cleaned = 0.00069055 Jy ! Total flux subtracted in 200 components = 0.00069055 Jy ! Clean residual min=-0.002270 max=0.002171 Jy/beam ! Clean residual mean=-0.000003 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.127997 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 142 components and 0.127997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115635Jy sigma=0.000629 ! Fit after self-cal, rms=0.115579Jy sigma=0.000629 ! Inverting map ! Added new window around map position (17.5, 93.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129663 Jy ! Component: 100 - total flux cleaned = 0.00118841 Jy ! Component: 150 - total flux cleaned = 0.00122701 Jy ! Component: 200 - total flux cleaned = 0.00126408 Jy ! Total flux subtracted in 200 components = 0.00126408 Jy ! Clean residual min=-0.002252 max=0.001867 Jy/beam ! Clean residual mean=-0.000003 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.129261 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 162 components and 0.129261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115515Jy sigma=0.000629 ! Fit after self-cal, rms=0.115426Jy sigma=0.000629 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115426Jy sigma=0.000629 ! Fit after self-cal, rms=0.114432Jy sigma=0.000629 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.759 mas, bmaj=27.35 mas, bpa=-8.066 degrees ! Estimated noise=1035.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000748489 Jy ! Component: 100 - total flux cleaned = 0.000884095 Jy ! Component: 150 - total flux cleaned = 0.00100353 Jy ! Component: 200 - total flux cleaned = 0.00108334 Jy ! Total flux subtracted in 200 components = 0.00108334 Jy ! Clean residual min=-0.002005 max=0.001821 Jy/beam ! Clean residual mean=0.000001 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.130344 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 193 components and 0.130344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114408Jy sigma=0.000628 ! Fit after self-cal, rms=0.114346Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208986 Jy ! Component: 100 - total flux cleaned = 0.000263862 Jy ! Component: 150 - total flux cleaned = 0.000288502 Jy ! Component: 200 - total flux cleaned = 0.000356698 Jy ! Total flux subtracted in 200 components = 0.000356698 Jy ! Clean residual min=-0.001988 max=0.001782 Jy/beam ! Clean residual mean=-0.000000 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.130701 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 208 components and 0.130701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114330Jy sigma=0.000628 ! Fit after self-cal, rms=0.114309Jy sigma=0.000628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.786 mas, bmaj=14.99 mas, bpa=-19.11 degrees ! Estimated noise=899.753 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.786 x 14.99 at -19.11 degrees (North through East) ! Clean map min=-0.0029112 max=0.070973 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.698 mas, bmaj=11.68 mas, bpa=-22.01 degrees ! Estimated noise=1826.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0572101 Jy ! Component: 100 - total flux cleaned = 0.0788423 Jy ! Component: 150 - total flux cleaned = 0.092467 Jy ! Component: 200 - total flux cleaned = 0.102165 Jy ! Total flux subtracted in 200 components = 0.102165 Jy ! Clean residual min=-0.007297 max=0.007062 Jy/beam ! Clean residual mean=0.000015 rms=0.001684 Jy/beam ! Combined flux in latest and established models = 0.102165 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.102165 Jy ! Inverting map and beam ! Estimated beam: bmin=3.786 mas, bmaj=14.99 mas, bpa=-19.11 degrees ! Estimated noise=899.753 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114245 Jy ! Component: 100 - total flux cleaned = 0.017333 Jy ! Component: 150 - total flux cleaned = 0.0203193 Jy ! Component: 200 - total flux cleaned = 0.0221266 Jy ! Total flux subtracted in 200 components = 0.0221266 Jy ! Clean residual min=-0.002963 max=0.003372 Jy/beam ! Clean residual mean=0.000008 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.124291 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 67 components and 0.124291 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.759 mas, bmaj=27.35 mas, bpa=-8.066 degrees ! Estimated noise=1035.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00259679 Jy ! Component: 100 - total flux cleaned = 0.00340985 Jy ! Component: 150 - total flux cleaned = 0.00369799 Jy ! Component: 200 - total flux cleaned = 0.00394565 Jy ! Total flux subtracted in 200 components = 0.00394565 Jy ! Clean residual min=-0.002622 max=0.002273 Jy/beam ! Clean residual mean=0.000002 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.128237 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000161609 Jy ! Component: 100 - total flux cleaned = 0.000259214 Jy ! Component: 150 - total flux cleaned = 0.000433599 Jy ! Component: 200 - total flux cleaned = 0.000590949 Jy ! Total flux subtracted in 200 components = 0.000590949 Jy ! Clean residual min=-0.002380 max=0.002127 Jy/beam ! Clean residual mean=0.000000 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.128828 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 126 components and 0.128828 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.786 mas, bmaj=14.99 mas, bpa=-19.11 degrees ! Estimated noise=899.753 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.79958e-05 Jy ! Component: 100 - total flux cleaned = 3.12366e-05 Jy ! Component: 150 - total flux cleaned = 0.000128695 Jy ! Component: 200 - total flux cleaned = 0.0002126 Jy ! Total flux subtracted in 200 components = 0.0002126 Jy ! Clean residual min=-0.002344 max=0.001964 Jy/beam ! Clean residual mean=-0.000002 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.12904 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 147 components and 0.12904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114319Jy sigma=0.000628 ! Fit after self-cal, rms=0.114201Jy sigma=0.000628 wmodel J0722-3038_S_2017_09_26_pus_map.mod ! Writing 147 model components to file: J0722-3038_S_2017_09_26_pus_map.mod wobs J0722-3038_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0722-3038_S_2017_09_26_pus_uvs.fits wwins J0722-3038_S_2017_09_26_pus_map.win ! wwins: Wrote 3 windows to J0722-3038_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000574855 Jy ! Component: 100 - total flux cleaned = -0.000895816 Jy ! Component: 150 - total flux cleaned = -0.00125574 Jy ! Component: 200 - total flux cleaned = -0.00159297 Jy ! Component: 250 - total flux cleaned = -0.00185492 Jy ! Component: 300 - total flux cleaned = -0.00199446 Jy ! Component: 350 - total flux cleaned = -0.00212799 Jy ! Component: 400 - total flux cleaned = -0.00225689 Jy ! Component: 450 - total flux cleaned = -0.00233222 Jy ! Component: 500 - total flux cleaned = -0.00238071 Jy ! Component: 550 - total flux cleaned = -0.00238059 Jy ! Component: 600 - total flux cleaned = -0.00233529 Jy ! Component: 650 - total flux cleaned = -0.00238028 Jy ! Component: 700 - total flux cleaned = -0.00235883 Jy ! Component: 750 - total flux cleaned = -0.00238044 Jy ! Component: 800 - total flux cleaned = -0.00244247 Jy ! Component: 850 - total flux cleaned = -0.00240151 Jy ! Component: 900 - total flux cleaned = -0.00232232 Jy ! Component: 950 - total flux cleaned = -0.00228386 Jy ! Component: 1000 - total flux cleaned = -0.00224622 Jy ! Component: 1050 - total flux cleaned = -0.00217238 Jy ! Component: 1100 - total flux cleaned = -0.00213648 Jy ! Component: 1150 - total flux cleaned = -0.00211903 Jy ! Component: 1200 - total flux cleaned = -0.00213657 Jy ! Component: 1250 - total flux cleaned = -0.00210253 Jy ! Component: 1300 - total flux cleaned = -0.00210245 Jy ! Component: 1350 - total flux cleaned = -0.00208567 Jy ! Component: 1400 - total flux cleaned = -0.00203693 Jy ! Component: 1450 - total flux cleaned = -0.00202098 Jy ! Component: 1500 - total flux cleaned = -0.00194178 Jy ! Component: 1550 - total flux cleaned = -0.00191058 Jy ! Component: 1600 - total flux cleaned = -0.00186434 Jy ! Component: 1650 - total flux cleaned = -0.00184907 Jy ! Component: 1700 - total flux cleaned = -0.00178922 Jy ! Component: 1750 - total flux cleaned = -0.00178908 Jy ! Component: 1800 - total flux cleaned = -0.00167229 Jy ! Component: 1850 - total flux cleaned = -0.00164361 Jy ! Component: 1900 - total flux cleaned = -0.00158665 Jy ! Component: 1950 - total flux cleaned = -0.00148843 Jy ! Component: 2000 - total flux cleaned = -0.00146075 Jy ! Component: 2050 - total flux cleaned = -0.00139216 Jy ! Component: 2100 - total flux cleaned = -0.00131089 Jy ! Component: 2150 - total flux cleaned = -0.00124409 Jy ! Component: 2200 - total flux cleaned = -0.00120455 Jy ! Component: 2250 - total flux cleaned = -0.00113929 Jy ! Component: 2300 - total flux cleaned = -0.00108788 Jy ! Component: 2350 - total flux cleaned = -0.00103676 Jy ! Component: 2400 - total flux cleaned = -0.00101153 Jy ! Component: 2450 - total flux cleaned = -0.000949408 Jy ! Component: 2500 - total flux cleaned = -0.00091238 Jy ! Component: 2550 - total flux cleaned = -0.000900237 Jy ! Component: 2600 - total flux cleaned = -0.00087607 Jy ! Component: 2650 - total flux cleaned = -0.000876063 Jy ! Component: 2700 - total flux cleaned = -0.000816873 Jy ! Component: 2750 - total flux cleaned = -0.00073496 Jy ! Component: 2800 - total flux cleaned = -0.000712027 Jy ! Component: 2850 - total flux cleaned = -0.000735098 Jy ! Component: 2900 - total flux cleaned = -0.000712312 Jy ! Component: 2950 - total flux cleaned = -0.000701071 Jy ! Component: 3000 - total flux cleaned = -0.000690006 Jy ! Component: 3050 - total flux cleaned = -0.00068985 Jy ! Component: 3100 - total flux cleaned = -0.00062382 Jy ! Component: 3150 - total flux cleaned = -0.000612853 Jy ! Component: 3200 - total flux cleaned = -0.000623758 Jy ! Component: 3250 - total flux cleaned = -0.000634426 Jy ! Component: 3300 - total flux cleaned = -0.000591566 Jy ! Component: 3350 - total flux cleaned = -0.000580946 Jy ! Component: 3400 - total flux cleaned = -0.000538766 Jy ! Component: 3450 - total flux cleaned = -0.000507346 Jy ! Component: 3500 - total flux cleaned = -0.000507309 Jy ! Component: 3550 - total flux cleaned = -0.000435 Jy ! Component: 3600 - total flux cleaned = -0.000414496 Jy ! Component: 3650 - total flux cleaned = -0.000394089 Jy ! Component: 3700 - total flux cleaned = -0.000363618 Jy ! Component: 3750 - total flux cleaned = -0.000303177 Jy ! Component: 3800 - total flux cleaned = -0.000273039 Jy ! Component: 3850 - total flux cleaned = -0.000243132 Jy ! Component: 3900 - total flux cleaned = -0.000193662 Jy ! Component: 3950 - total flux cleaned = -0.000134637 Jy ! Component: 4000 - total flux cleaned = -8.5738e-05 Jy ! Component: 4050 - total flux cleaned = -2.73675e-05 Jy ! Total flux subtracted in 4096 components = 5.00273e-05 Jy ! Clean residual min=-0.000540 max=0.000578 Jy/beam ! Clean residual mean=-0.000003 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.12909 Jy keep ! Adding 237 model components to the UV plane model. ! The established model now contains 384 components and 0.12909 Jy ![Exited script file: muppet] wmap "J0722-3038_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.786 x 14.99 at -19.11 degrees (North through East) ! Clean map min=-0.0029093 max=0.075277 Jy/beam ! Writing clean map to FITS file: J0722-3038_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0752769 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000191317 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.762453 0.762453 1.52491 3.04981 6.09962 12.1992 24.3985 48.797 97.594 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.075 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.786 x 14.99 at -19.11 degrees (North through East) ! Clean map min=-0.0029093 max=0.075277 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0722-3038_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:57:17 2019