! Started logfile: J0722-3038_S_2017_02_19_pus_uvs.log on Sat May 4 18:45:33 2019 obs J0722-3038_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0722-3038_S_2017_02_19_pus_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.383257 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0722-3038 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 10072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0722-3038_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 531 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 720 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 599 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1066 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.959787Jy sigma=0.005738 ! Fit after self-cal, rms=0.918646Jy sigma=0.005513 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.454 mas, bmaj=18.56 mas, bpa=-9.99 degrees ! Estimated noise=2589.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0606547 Jy ! Component: 100 - total flux cleaned = 0.0774479 Jy ! Total flux subtracted in 100 components = 0.0774479 Jy ! Clean residual min=-0.008334 max=0.008691 Jy/beam ! Clean residual mean=0.000012 rms=0.002372 Jy/beam ! Combined flux in latest and established models = 0.0774479 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0774479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115562Jy sigma=0.000636 ! Fit after self-cal, rms=0.115148Jy sigma=0.000634 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.178 mas, bmaj=21.72 mas, bpa=-5.039 degrees ! Estimated noise=1445.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014385 Jy ! Component: 100 - total flux cleaned = 0.0214845 Jy ! Component: 150 - total flux cleaned = 0.0254799 Jy ! Component: 200 - total flux cleaned = 0.0279172 Jy ! Total flux subtracted in 200 components = 0.0279172 Jy ! Clean residual min=-0.004953 max=0.005886 Jy/beam ! Clean residual mean=-0.000033 rms=0.001742 Jy/beam ! Combined flux in latest and established models = 0.105365 Jy ! Performing phase self-cal ! Adding 110 model components to the UV plane model. ! The established model now contains 131 components and 0.105365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113376Jy sigma=0.000623 ! Fit after self-cal, rms=0.113403Jy sigma=0.000622 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.91 HN 1.04 KP 1.06 ! LA 0.99 MK 1.16 NL 1.16 OV 1.10 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.91 HN 1.01 KP 1.01 ! LA 0.93 MK 0.96 NL 1.00* OV 1.20 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.86 KP 0.86 ! LA 0.81 MK 1.00 NL 1.31 OV 1.04 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.87 HN 1.00 KP 1.00* ! LA 0.82 MK 1.00* NL 1.00* OV 1.21 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.113403Jy sigma=0.000622 ! Fit after self-cal, rms=0.113521Jy sigma=0.000618 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.312 mas, bmaj=22.43 mas, bpa=-4.293 degrees ! Estimated noise=1454.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232956 Jy ! Component: 100 - total flux cleaned = 0.00296817 Jy ! Component: 150 - total flux cleaned = 0.00320485 Jy ! Component: 200 - total flux cleaned = 0.00344467 Jy ! Total flux subtracted in 200 components = 0.00344467 Jy ! Clean residual min=-0.004039 max=0.005611 Jy/beam ! Clean residual mean=-0.000036 rms=0.001354 Jy/beam ! Combined flux in latest and established models = 0.10881 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 144 components and 0.10881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113472Jy sigma=0.000617 ! Fit after self-cal, rms=0.113793Jy sigma=0.000616 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113793Jy sigma=0.000616 ! Fit after self-cal, rms=0.115495Jy sigma=0.000615 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.278 mas, bmaj=22.57 mas, bpa=-4.279 degrees ! Estimated noise=1462.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179979 Jy ! Component: 100 - total flux cleaned = 0.00241712 Jy ! Component: 150 - total flux cleaned = 0.00253076 Jy ! Component: 200 - total flux cleaned = 0.00264625 Jy ! Total flux subtracted in 200 components = 0.00264625 Jy ! Clean residual min=-0.003583 max=0.004664 Jy/beam ! Clean residual mean=-0.000025 rms=0.001197 Jy/beam ! Combined flux in latest and established models = 0.111456 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 164 components and 0.111456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115467Jy sigma=0.000615 ! Fit after self-cal, rms=0.115609Jy sigma=0.000615 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000341363 Jy ! Component: 100 - total flux cleaned = 0.000441941 Jy ! Component: 150 - total flux cleaned = 0.00048471 Jy ! Component: 200 - total flux cleaned = 0.000484687 Jy ! Total flux subtracted in 200 components = 0.000484687 Jy ! Clean residual min=-0.003552 max=0.004646 Jy/beam ! Clean residual mean=-0.000026 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.111941 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 176 components and 0.111941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115601Jy sigma=0.000615 ! Fit after self-cal, rms=0.115618Jy sigma=0.000615 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115618Jy sigma=0.000615 ! Fit after self-cal, rms=0.115413Jy sigma=0.000614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.243 mas, bmaj=22.46 mas, bpa=-4.188 degrees ! Estimated noise=1458.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132324 Jy ! Component: 100 - total flux cleaned = 0.00168049 Jy ! Component: 150 - total flux cleaned = 0.00182466 Jy ! Component: 200 - total flux cleaned = 0.00192125 Jy ! Total flux subtracted in 200 components = 0.00192125 Jy ! Clean residual min=-0.003444 max=0.004340 Jy/beam ! Clean residual mean=-0.000022 rms=0.001160 Jy/beam ! Combined flux in latest and established models = 0.113862 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 180 components and 0.113862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115397Jy sigma=0.000614 ! Fit after self-cal, rms=0.115461Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000218561 Jy ! Component: 100 - total flux cleaned = 0.000301524 Jy ! Component: 150 - total flux cleaned = 0.000356473 Jy ! Component: 200 - total flux cleaned = 0.000388589 Jy ! Total flux subtracted in 200 components = 0.000388589 Jy ! Clean residual min=-0.003521 max=0.004336 Jy/beam ! Clean residual mean=-0.000023 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.114251 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 185 components and 0.114251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115456Jy sigma=0.000614 ! Fit after self-cal, rms=0.115468Jy sigma=0.000614 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115468Jy sigma=0.000614 ! Fit after self-cal, rms=0.114947Jy sigma=0.000614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.142 mas, bmaj=28.37 mas, bpa=6.328 degrees ! Estimated noise=1558.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160959 Jy ! Component: 100 - total flux cleaned = 0.00211016 Jy ! Component: 150 - total flux cleaned = 0.00226534 Jy ! Component: 200 - total flux cleaned = 0.00237825 Jy ! Total flux subtracted in 200 components = 0.00237825 Jy ! Clean residual min=-0.003728 max=0.004760 Jy/beam ! Clean residual mean=-0.000026 rms=0.001347 Jy/beam ! Combined flux in latest and established models = 0.116629 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 191 components and 0.116629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114943Jy sigma=0.000614 ! Fit after self-cal, rms=0.114972Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000297705 Jy ! Component: 100 - total flux cleaned = 0.000361901 Jy ! Component: 150 - total flux cleaned = 0.000402423 Jy ! Component: 200 - total flux cleaned = 0.000441943 Jy ! Total flux subtracted in 200 components = 0.000441943 Jy ! Clean residual min=-0.003741 max=0.004748 Jy/beam ! Clean residual mean=-0.000027 rms=0.001349 Jy/beam ! Combined flux in latest and established models = 0.117071 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 201 components and 0.117071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114974Jy sigma=0.000614 ! Fit after self-cal, rms=0.114979Jy sigma=0.000614 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.214 mas, bmaj=22.32 mas, bpa=-4.133 degrees ! Estimated noise=1452.01 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.214 x 22.32 at -4.133 degrees (North through East) ! Clean map min=-0.0033871 max=0.085317 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.461 mas, bmaj=18.99 mas, bpa=-8.947 degrees ! Estimated noise=2758.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0599681 Jy ! Component: 100 - total flux cleaned = 0.0807825 Jy ! Component: 150 - total flux cleaned = 0.0926819 Jy ! Component: 200 - total flux cleaned = 0.100165 Jy ! Total flux subtracted in 200 components = 0.100165 Jy ! Clean residual min=-0.007944 max=0.007119 Jy/beam ! Clean residual mean=0.000001 rms=0.002121 Jy/beam ! Combined flux in latest and established models = 0.100165 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 59 model components to the UV plane model. ! The established model now contains 59 components and 0.100165 Jy ! Inverting map and beam ! Estimated beam: bmin=5.214 mas, bmaj=22.32 mas, bpa=-4.133 degrees ! Estimated noise=1452.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00771109 Jy ! Component: 100 - total flux cleaned = 0.0101635 Jy ! Component: 150 - total flux cleaned = 0.0115715 Jy ! Component: 200 - total flux cleaned = 0.0130882 Jy ! Total flux subtracted in 200 components = 0.0130882 Jy ! Clean residual min=-0.003322 max=0.003612 Jy/beam ! Clean residual mean=-0.000011 rms=0.001026 Jy/beam ! Combined flux in latest and established models = 0.113253 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 114 components and 0.113253 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.142 mas, bmaj=28.37 mas, bpa=6.328 degrees ! Estimated noise=1558.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159435 Jy ! Component: 100 - total flux cleaned = 0.00270586 Jy ! Component: 150 - total flux cleaned = 0.00347317 Jy ! Component: 200 - total flux cleaned = 0.00381103 Jy ! Total flux subtracted in 200 components = 0.00381103 Jy ! Clean residual min=-0.003863 max=0.003812 Jy/beam ! Clean residual mean=-0.000010 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.117064 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000169724 Jy ! Component: 100 - total flux cleaned = 0.00035836 Jy ! Component: 150 - total flux cleaned = 0.000503874 Jy ! Component: 200 - total flux cleaned = 0.000612905 Jy ! Total flux subtracted in 200 components = 0.000612905 Jy ! Clean residual min=-0.003780 max=0.003665 Jy/beam ! Clean residual mean=-0.000008 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.117677 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 183 components and 0.117677 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.214 mas, bmaj=22.32 mas, bpa=-4.133 degrees ! Estimated noise=1452.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000168027 Jy ! Component: 100 - total flux cleaned = 2.20767e-05 Jy ! Component: 150 - total flux cleaned = 0.00018525 Jy ! Component: 200 - total flux cleaned = 0.000213123 Jy ! Total flux subtracted in 200 components = 0.000213123 Jy ! Clean residual min=-0.003179 max=0.003230 Jy/beam ! Clean residual mean=-0.000005 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.11789 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 202 components and 0.11789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114871Jy sigma=0.000613 ! Fit after self-cal, rms=0.114798Jy sigma=0.000613 wmodel J0722-3038_S_2017_02_19_pus_map.mod ! Writing 202 model components to file: J0722-3038_S_2017_02_19_pus_map.mod wobs J0722-3038_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0722-3038_S_2017_02_19_pus_uvs.fits wwins J0722-3038_S_2017_02_19_pus_map.win ! wwins: Wrote 2 windows to J0722-3038_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124239 Jy ! Component: 100 - total flux cleaned = 0.00154966 Jy ! Component: 150 - total flux cleaned = 0.00141697 Jy ! Component: 200 - total flux cleaned = 0.00115893 Jy ! Component: 250 - total flux cleaned = 0.000873486 Jy ! Component: 300 - total flux cleaned = 0.000604869 Jy ! Component: 350 - total flux cleaned = 0.000458446 Jy ! Component: 400 - total flux cleaned = 0.000492087 Jy ! Component: 450 - total flux cleaned = 0.000624843 Jy ! Component: 500 - total flux cleaned = 0.000687508 Jy ! Component: 550 - total flux cleaned = 0.000779195 Jy ! Component: 600 - total flux cleaned = 0.000779071 Jy ! Component: 650 - total flux cleaned = 0.00086445 Jy ! Component: 700 - total flux cleaned = 0.000863488 Jy ! Component: 750 - total flux cleaned = 0.000916891 Jy ! Component: 800 - total flux cleaned = 0.000890017 Jy ! Component: 850 - total flux cleaned = 0.000940837 Jy ! Component: 900 - total flux cleaned = 0.000915298 Jy ! Component: 950 - total flux cleaned = 0.000819195 Jy ! Component: 1000 - total flux cleaned = 0.000819013 Jy ! Component: 1050 - total flux cleaned = 0.000680868 Jy ! Component: 1100 - total flux cleaned = 0.000636031 Jy ! Component: 1150 - total flux cleaned = 0.000570836 Jy ! Component: 1200 - total flux cleaned = 0.000550098 Jy ! Component: 1250 - total flux cleaned = 0.000487559 Jy ! Component: 1300 - total flux cleaned = 0.000508301 Jy ! Component: 1350 - total flux cleaned = 0.00046789 Jy ! Component: 1400 - total flux cleaned = 0.000428413 Jy ! Component: 1450 - total flux cleaned = 0.000428547 Jy ! Component: 1500 - total flux cleaned = 0.000428494 Jy ! Component: 1550 - total flux cleaned = 0.000447236 Jy ! Component: 1600 - total flux cleaned = 0.00048445 Jy ! Component: 1650 - total flux cleaned = 0.000520682 Jy ! Component: 1700 - total flux cleaned = 0.000466536 Jy ! Component: 1750 - total flux cleaned = 0.000502392 Jy ! Component: 1800 - total flux cleaned = 0.000484604 Jy ! Component: 1850 - total flux cleaned = 0.000536876 Jy ! Component: 1900 - total flux cleaned = 0.000622728 Jy ! Component: 1950 - total flux cleaned = 0.000605676 Jy ! Component: 2000 - total flux cleaned = 0.000689718 Jy ! Component: 2050 - total flux cleaned = 0.00067316 Jy ! Component: 2100 - total flux cleaned = 0.000689529 Jy ! Component: 2150 - total flux cleaned = 0.000738381 Jy ! Component: 2200 - total flux cleaned = 0.000786445 Jy ! Component: 2250 - total flux cleaned = 0.000802408 Jy ! Component: 2300 - total flux cleaned = 0.000881069 Jy ! Component: 2350 - total flux cleaned = 0.00099015 Jy ! Component: 2400 - total flux cleaned = 0.00100558 Jy ! Component: 2450 - total flux cleaned = 0.00108252 Jy ! Component: 2500 - total flux cleaned = 0.00117392 Jy ! Component: 2550 - total flux cleaned = 0.00127977 Jy ! Component: 2600 - total flux cleaned = 0.00136972 Jy ! Component: 2650 - total flux cleaned = 0.00145917 Jy ! Component: 2700 - total flux cleaned = 0.00157734 Jy ! Component: 2750 - total flux cleaned = 0.00166523 Jy ! Component: 2800 - total flux cleaned = 0.00173792 Jy ! Component: 2850 - total flux cleaned = 0.00178131 Jy ! Component: 2900 - total flux cleaned = 0.00188205 Jy ! Component: 2950 - total flux cleaned = 0.00196789 Jy ! Component: 3000 - total flux cleaned = 0.00199639 Jy ! Component: 3050 - total flux cleaned = 0.00206738 Jy ! Component: 3100 - total flux cleaned = 0.00208139 Jy ! Component: 3150 - total flux cleaned = 0.0020531 Jy ! Component: 3200 - total flux cleaned = 0.00206721 Jy ! Component: 3250 - total flux cleaned = 0.00203907 Jy ! Component: 3300 - total flux cleaned = 0.00203908 Jy ! Component: 3350 - total flux cleaned = 0.00199688 Jy ! Component: 3400 - total flux cleaned = 0.00202496 Jy ! Component: 3450 - total flux cleaned = 0.0019968 Jy ! Component: 3500 - total flux cleaned = 0.00198264 Jy ! Component: 3550 - total flux cleaned = 0.0019545 Jy ! Component: 3600 - total flux cleaned = 0.00195457 Jy ! Component: 3650 - total flux cleaned = 0.0019546 Jy ! Component: 3700 - total flux cleaned = 0.00195459 Jy ! Component: 3750 - total flux cleaned = 0.00194033 Jy ! Component: 3800 - total flux cleaned = 0.001926 Jy ! Component: 3850 - total flux cleaned = 0.00191168 Jy ! Component: 3900 - total flux cleaned = 0.00185411 Jy ! Component: 3950 - total flux cleaned = 0.00179621 Jy ! Component: 4000 - total flux cleaned = 0.00173809 Jy ! Component: 4050 - total flux cleaned = 0.00166517 Jy ! Total flux subtracted in 4096 components = 0.0016357 Jy ! Clean residual min=-0.001097 max=0.000965 Jy/beam ! Clean residual mean=0.000003 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.119526 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 498 components and 0.119526 Jy ![Exited script file: muppet] wmap "J0722-3038_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.214 x 22.32 at -4.133 degrees (North through East) ! Clean map min=-0.0021331 max=0.084103 Jy/beam ! Writing clean map to FITS file: J0722-3038_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0841028 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000253688 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.904921 0.904921 1.80984 3.61968 7.23937 14.4787 28.9575 57.9149 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.084 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.214 x 22.32 at -4.133 degrees (North through East) ! Clean map min=-0.0021331 max=0.084103 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0722-3038_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:45:38 2019