! Started logfile: J0721-3528_S_2017_09_26_pus_uvs.log on Sat May 11 12:57:05 2019 obs J0721-3528_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0721-3528_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.255102 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0721-3528 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 10800 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0721-3528_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1394 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1481 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1396 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2214 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.979635Jy sigma=0.006325 ! Fit after self-cal, rms=0.922256Jy sigma=0.006002 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.309 mas, bmaj=19.12 mas, bpa=-37.99 degrees ! Estimated noise=2872.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0616961 Jy ! Component: 100 - total flux cleaned = 0.077275 Jy ! Total flux subtracted in 100 components = 0.077275 Jy ! Clean residual min=-0.008952 max=0.009511 Jy/beam ! Clean residual mean=-0.000049 rms=0.002926 Jy/beam ! Combined flux in latest and established models = 0.077275 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.077275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093479Jy sigma=0.000571 ! Fit after self-cal, rms=0.092881Jy sigma=0.000568 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.682 mas, bmaj=22.4 mas, bpa=-32.25 degrees ! Estimated noise=1360.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00562313 Jy ! Component: 100 - total flux cleaned = 0.00712276 Jy ! Component: 150 - total flux cleaned = 0.00729668 Jy ! Component: 200 - total flux cleaned = 0.00744871 Jy ! Total flux subtracted in 200 components = 0.00744871 Jy ! Clean residual min=-0.002626 max=0.002670 Jy/beam ! Clean residual mean=-0.000043 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.0847237 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 29 components and 0.0847237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092512Jy sigma=0.000566 ! Fit after self-cal, rms=0.092424Jy sigma=0.000566 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.00* KP 1.01 ! LA 1.06 MK 1.19 NL 1.00* OV 1.08 ! PT 1.05 ! ! ! Correcting IF 2. ! A total of 111 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.97 ! LA 0.96 MK 1.03 NL 1.00* OV 1.03 ! PT 1.02 ! ! ! Correcting IF 3. ! A total of 270 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.94 ! LA 0.99 MK 1.00 NL 0.92 OV 0.98 ! PT 1.07 ! ! ! Correcting IF 4. ! A total of 312 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 0.96 MK 1.02 NL 1.00* OV 0.78 ! PT 0.91 ! ! ! Fit before self-cal, rms=0.092424Jy sigma=0.000566 ! Fit after self-cal, rms=0.091241Jy sigma=0.000571 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.385 mas, bmaj=22.15 mas, bpa=-32.48 degrees ! Estimated noise=1450.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000809858 Jy ! Component: 100 - total flux cleaned = 0.00104067 Jy ! Component: 150 - total flux cleaned = 0.00113932 Jy ! Component: 200 - total flux cleaned = 0.00113721 Jy ! Total flux subtracted in 200 components = 0.00113721 Jy ! Clean residual min=-0.002134 max=0.002263 Jy/beam ! Clean residual mean=-0.000049 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.0858609 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.0858609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091213Jy sigma=0.000571 ! Fit after self-cal, rms=0.091082Jy sigma=0.000571 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091082Jy sigma=0.000571 ! Fit after self-cal, rms=0.090973Jy sigma=0.000571 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.376 mas, bmaj=22.09 mas, bpa=-32.4 degrees ! Estimated noise=1451.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000677789 Jy ! Component: 100 - total flux cleaned = 0.000678828 Jy ! Component: 150 - total flux cleaned = 0.000679279 Jy ! Component: 200 - total flux cleaned = 0.000677696 Jy ! Total flux subtracted in 200 components = 0.000677696 Jy ! Clean residual min=-0.002278 max=0.002047 Jy/beam ! Clean residual mean=-0.000014 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.0865386 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 43 components and 0.0865386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090952Jy sigma=0.000571 ! Fit after self-cal, rms=0.090958Jy sigma=0.000570 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.15739e-05 Jy ! Component: 100 - total flux cleaned = 8.1752e-05 Jy ! Component: 150 - total flux cleaned = 8.20424e-05 Jy ! Component: 200 - total flux cleaned = 8.18543e-05 Jy ! Total flux subtracted in 200 components = 8.18543e-05 Jy ! Clean residual min=-0.002227 max=0.002250 Jy/beam ! Clean residual mean=-0.000024 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.0866205 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 46 components and 0.0866205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090941Jy sigma=0.000570 ! Fit after self-cal, rms=0.090939Jy sigma=0.000570 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090939Jy sigma=0.000570 ! Fit after self-cal, rms=0.090938Jy sigma=0.000570 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.358 mas, bmaj=22.05 mas, bpa=-32.4 degrees ! Estimated noise=1452.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0004763 Jy ! Component: 100 - total flux cleaned = 0.000477303 Jy ! Component: 150 - total flux cleaned = 0.00047894 Jy ! Component: 200 - total flux cleaned = 0.000478734 Jy ! Total flux subtracted in 200 components = 0.000478734 Jy ! Clean residual min=-0.002188 max=0.002102 Jy/beam ! Clean residual mean=-0.000013 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.0870992 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.0870992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090922Jy sigma=0.000570 ! Fit after self-cal, rms=0.090920Jy sigma=0.000570 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.27822e-05 Jy ! Component: 100 - total flux cleaned = -3.71159e-05 Jy ! Component: 150 - total flux cleaned = -6.17202e-05 Jy ! Component: 200 - total flux cleaned = -6.0396e-05 Jy ! Total flux subtracted in 200 components = -6.0396e-05 Jy ! Clean residual min=-0.002201 max=0.002109 Jy/beam ! Clean residual mean=-0.000017 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.0870388 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.0870388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090907Jy sigma=0.000570 ! Fit after self-cal, rms=0.090906Jy sigma=0.000570 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090906Jy sigma=0.000570 ! Fit after self-cal, rms=0.090887Jy sigma=0.000570 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.41 mas, bmaj=34.84 mas, bpa=-9.729 degrees ! Estimated noise=1527.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000389097 Jy ! Component: 100 - total flux cleaned = 0.000421287 Jy ! Component: 150 - total flux cleaned = 0.000420921 Jy ! Component: 200 - total flux cleaned = 0.000420931 Jy ! Total flux subtracted in 200 components = 0.000420931 Jy ! Clean residual min=-0.001733 max=0.001983 Jy/beam ! Clean residual mean=-0.000014 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.0874598 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 70 components and 0.0874598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090885Jy sigma=0.000570 ! Fit after self-cal, rms=0.090886Jy sigma=0.000570 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.61326e-05 Jy ! Component: 100 - total flux cleaned = 2.57641e-05 Jy ! Component: 150 - total flux cleaned = 3.51721e-05 Jy ! Component: 200 - total flux cleaned = 2.68392e-05 Jy ! Total flux subtracted in 200 components = 2.68392e-05 Jy ! Clean residual min=-0.001705 max=0.001997 Jy/beam ! Clean residual mean=-0.000016 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.0874866 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 75 components and 0.0874866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090883Jy sigma=0.000570 ! Fit after self-cal, rms=0.090884Jy sigma=0.000570 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.339 mas, bmaj=22.02 mas, bpa=-32.43 degrees ! Estimated noise=1452.65 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.339 x 22.02 at -32.43 degrees (North through East) ! Clean map min=-0.0029993 max=0.07529 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.315 mas, bmaj=18.52 mas, bpa=-37.74 degrees ! Estimated noise=2856.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0588918 Jy ! Component: 100 - total flux cleaned = 0.0741506 Jy ! Component: 150 - total flux cleaned = 0.0778661 Jy ! Component: 200 - total flux cleaned = 0.0797135 Jy ! Total flux subtracted in 200 components = 0.0797135 Jy ! Clean residual min=-0.007861 max=0.007198 Jy/beam ! Clean residual mean=-0.000031 rms=0.002464 Jy/beam ! Combined flux in latest and established models = 0.0797135 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0797135 Jy ! Inverting map and beam ! Estimated beam: bmin=6.339 mas, bmaj=22.02 mas, bpa=-32.43 degrees ! Estimated noise=1452.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00586164 Jy ! Component: 100 - total flux cleaned = 0.00727303 Jy ! Component: 150 - total flux cleaned = 0.00745899 Jy ! Component: 200 - total flux cleaned = 0.00742163 Jy ! Total flux subtracted in 200 components = 0.00742163 Jy ! Clean residual min=-0.002353 max=0.001988 Jy/beam ! Clean residual mean=-0.000014 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.0871351 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 50 components and 0.0871351 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.41 mas, bmaj=34.84 mas, bpa=-9.729 degrees ! Estimated noise=1527.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000202256 Jy ! Component: 100 - total flux cleaned = 0.000220382 Jy ! Component: 150 - total flux cleaned = 0.000220543 Jy ! Component: 200 - total flux cleaned = 0.000234687 Jy ! Total flux subtracted in 200 components = 0.000234687 Jy ! Clean residual min=-0.001769 max=0.001805 Jy/beam ! Clean residual mean=-0.000014 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.0873698 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.28852e-05 Jy ! Component: 100 - total flux cleaned = 1.30048e-05 Jy ! Component: 150 - total flux cleaned = 2.50911e-05 Jy ! Component: 200 - total flux cleaned = 3.54069e-05 Jy ! Total flux subtracted in 200 components = 3.54069e-05 Jy ! Clean residual min=-0.001699 max=0.001777 Jy/beam ! Clean residual mean=-0.000014 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.0874052 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 65 components and 0.0874052 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.339 mas, bmaj=22.02 mas, bpa=-32.43 degrees ! Estimated noise=1452.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.95436e-06 Jy ! Component: 100 - total flux cleaned = -1.77264e-05 Jy ! Component: 150 - total flux cleaned = -1.71092e-05 Jy ! Component: 200 - total flux cleaned = -1.67792e-05 Jy ! Total flux subtracted in 200 components = -1.67792e-05 Jy ! Clean residual min=-0.002313 max=0.001891 Jy/beam ! Clean residual mean=-0.000012 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.0873884 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 75 components and 0.0873884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090887Jy sigma=0.000570 ! Fit after self-cal, rms=0.090889Jy sigma=0.000570 wmodel J0721-3528_S_2017_09_26_pus_map.mod ! Writing 75 model components to file: J0721-3528_S_2017_09_26_pus_map.mod wobs J0721-3528_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0721-3528_S_2017_09_26_pus_uvs.fits wwins J0721-3528_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J0721-3528_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000647723 Jy ! Component: 100 - total flux cleaned = -0.00119712 Jy ! Component: 150 - total flux cleaned = -0.00160568 Jy ! Component: 200 - total flux cleaned = -0.00186715 Jy ! Component: 250 - total flux cleaned = -0.00208491 Jy ! Component: 300 - total flux cleaned = -0.00231441 Jy ! Component: 350 - total flux cleaned = -0.00226658 Jy ! Component: 400 - total flux cleaned = -0.00222056 Jy ! Component: 450 - total flux cleaned = -0.00213284 Jy ! Component: 500 - total flux cleaned = -0.00211171 Jy ! Component: 550 - total flux cleaned = -0.00199174 Jy ! Component: 600 - total flux cleaned = -0.00189651 Jy ! Component: 650 - total flux cleaned = -0.00178572 Jy ! Component: 700 - total flux cleaned = -0.00166087 Jy ! Component: 750 - total flux cleaned = -0.00157469 Jy ! Component: 800 - total flux cleaned = -0.00143979 Jy ! Component: 850 - total flux cleaned = -0.00132509 Jy ! Component: 900 - total flux cleaned = -0.00121313 Jy ! Component: 950 - total flux cleaned = -0.00107321 Jy ! Component: 1000 - total flux cleaned = -0.000951717 Jy ! Component: 1050 - total flux cleaned = -0.000877071 Jy ! Component: 1100 - total flux cleaned = -0.000789502 Jy ! Component: 1150 - total flux cleaned = -0.00073223 Jy ! Component: 1200 - total flux cleaned = -0.000662053 Jy ! Component: 1250 - total flux cleaned = -0.000606774 Jy ! Component: 1300 - total flux cleaned = -0.000539 Jy ! Component: 1350 - total flux cleaned = -0.0004724 Jy ! Component: 1400 - total flux cleaned = -0.000406775 Jy ! Component: 1450 - total flux cleaned = -0.0003161 Jy ! Component: 1500 - total flux cleaned = -0.000226483 Jy ! Component: 1550 - total flux cleaned = -0.000188462 Jy ! Component: 1600 - total flux cleaned = -0.000163364 Jy ! Component: 1650 - total flux cleaned = -0.000163174 Jy ! Component: 1700 - total flux cleaned = -0.000150889 Jy ! Component: 1750 - total flux cleaned = -0.000175393 Jy ! Component: 1800 - total flux cleaned = -0.000175259 Jy ! Component: 1850 - total flux cleaned = -0.000175255 Jy ! Component: 1900 - total flux cleaned = -0.000163166 Jy ! Component: 1950 - total flux cleaned = -0.000175107 Jy ! Component: 2000 - total flux cleaned = -0.000175079 Jy ! Component: 2050 - total flux cleaned = -0.000163158 Jy ! Component: 2100 - total flux cleaned = -0.000163172 Jy ! Component: 2150 - total flux cleaned = -0.000115613 Jy ! Component: 2200 - total flux cleaned = -0.000103721 Jy ! Component: 2250 - total flux cleaned = -9.19053e-05 Jy ! Component: 2300 - total flux cleaned = -4.44035e-05 Jy ! Component: 2350 - total flux cleaned = 1.49142e-05 Jy ! Component: 2400 - total flux cleaned = 6.2355e-05 Jy ! Component: 2450 - total flux cleaned = 0.000121772 Jy ! Component: 2500 - total flux cleaned = 0.000157606 Jy ! Component: 2550 - total flux cleaned = 0.000229111 Jy ! Component: 2600 - total flux cleaned = 0.000264902 Jy ! Component: 2650 - total flux cleaned = 0.000336628 Jy ! Component: 2700 - total flux cleaned = 0.000396679 Jy ! Component: 2750 - total flux cleaned = 0.000468978 Jy ! Component: 2800 - total flux cleaned = 0.000553761 Jy ! Component: 2850 - total flux cleaned = 0.000626824 Jy ! Component: 2900 - total flux cleaned = 0.000687921 Jy ! Component: 2950 - total flux cleaned = 0.000786071 Jy ! Component: 3000 - total flux cleaned = 0.000847803 Jy ! Component: 3050 - total flux cleaned = 0.000922262 Jy ! Component: 3100 - total flux cleaned = 0.00100959 Jy ! Component: 3150 - total flux cleaned = 0.00108488 Jy ! Component: 3200 - total flux cleaned = 0.00117325 Jy ! Component: 3250 - total flux cleaned = 0.00124949 Jy ! Component: 3300 - total flux cleaned = 0.00132619 Jy ! Component: 3350 - total flux cleaned = 0.00139035 Jy ! Component: 3400 - total flux cleaned = 0.00145506 Jy ! Component: 3450 - total flux cleaned = 0.0015461 Jy ! Component: 3500 - total flux cleaned = 0.00163785 Jy ! Component: 3550 - total flux cleaned = 0.00167753 Jy ! Component: 3600 - total flux cleaned = 0.00171735 Jy ! Component: 3650 - total flux cleaned = 0.00178436 Jy ! Component: 3700 - total flux cleaned = 0.00182482 Jy ! Component: 3750 - total flux cleaned = 0.00187935 Jy ! Component: 3800 - total flux cleaned = 0.00190692 Jy ! Component: 3850 - total flux cleaned = 0.0019485 Jy ! Component: 3900 - total flux cleaned = 0.00199056 Jy ! Component: 3950 - total flux cleaned = 0.00201887 Jy ! Component: 4000 - total flux cleaned = 0.00204754 Jy ! Component: 4050 - total flux cleaned = 0.00207638 Jy ! Total flux subtracted in 4096 components = 0.00210548 Jy ! Clean residual min=-0.000846 max=0.000933 Jy/beam ! Clean residual mean=-0.000006 rms=0.000292 Jy/beam ! Combined flux in latest and established models = 0.0894939 Jy keep ! Adding 219 model components to the UV plane model. ! The established model now contains 294 components and 0.0894939 Jy ![Exited script file: muppet] wmap "J0721-3528_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.339 x 22.02 at -32.43 degrees (North through East) ! Clean map min=-0.0019979 max=0.075583 Jy/beam ! Writing clean map to FITS file: J0721-3528_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0755828 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00034964 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.38777 1.38777 2.77555 5.55109 11.1022 22.2044 44.4088 88.8175 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.075 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.339 x 22.02 at -32.43 degrees (North through East) ! Clean map min=-0.0019979 max=0.075583 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0721-3528_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:57:11 2019