! Started logfile: J0721-3528_S_2017_02_19_pus_uvs.log on Sat May 4 18:45:28 2019 obs J0721-3528_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0721-3528_S_2017_02_19_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.478927 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0721-3528 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 10000 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0721-3528_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 345 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 390 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 360 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 725 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.988493Jy sigma=0.005824 ! Fit after self-cal, rms=0.928592Jy sigma=0.005505 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.606 mas, bmaj=8.373 mas, bpa=-12.74 degrees ! Estimated noise=1912.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0545252 Jy ! Component: 100 - total flux cleaned = 0.0704452 Jy ! Total flux subtracted in 100 components = 0.0704452 Jy ! Clean residual min=-0.005705 max=0.007668 Jy/beam ! Clean residual mean=0.000044 rms=0.001602 Jy/beam ! Combined flux in latest and established models = 0.0704452 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0704452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123534Jy sigma=0.000637 ! Fit after self-cal, rms=0.122706Jy sigma=0.000632 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.263 mas, bmaj=9.978 mas, bpa=-10.65 degrees ! Estimated noise=1376.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131671 Jy ! Component: 100 - total flux cleaned = 0.0191548 Jy ! Component: 150 - total flux cleaned = 0.0220318 Jy ! Component: 200 - total flux cleaned = 0.023472 Jy ! Total flux subtracted in 200 components = 0.023472 Jy ! Clean residual min=-0.004241 max=0.004188 Jy/beam ! Clean residual mean=-0.000008 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.0939172 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 70 components and 0.0939172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121125Jy sigma=0.000626 ! Fit after self-cal, rms=0.120890Jy sigma=0.000625 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.00* KP 1.09 ! LA 1.07 MK 1.02 NL 0.82 OV 1.04 ! PT 1.00* SC 1.07 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.15 HN 1.00* KP 1.02 ! LA 0.98 MK 1.18 NL 0.92 OV 1.14 ! PT 1.00* SC 1.11 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.00* KP 0.89 ! LA 0.80 MK 1.09 NL 1.10 OV 0.95 ! PT 1.00* SC 1.06 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 1.00* KP 1.00* ! LA 0.79 MK 0.93 NL 1.00* OV 1.00 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.120890Jy sigma=0.000625 ! Fit after self-cal, rms=0.116316Jy sigma=0.000622 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.347 mas, bmaj=10.12 mas, bpa=-10.84 degrees ! Estimated noise=1388.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000692133 Jy ! Component: 100 - total flux cleaned = 0.00075317 Jy ! Component: 150 - total flux cleaned = 0.000806387 Jy ! Component: 200 - total flux cleaned = 0.000830956 Jy ! Total flux subtracted in 200 components = 0.000830956 Jy ! Clean residual min=-0.003592 max=0.003276 Jy/beam ! Clean residual mean=0.000000 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.0947481 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 79 components and 0.0947481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116299Jy sigma=0.000622 ! Fit after self-cal, rms=0.116029Jy sigma=0.000621 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116029Jy sigma=0.000621 ! Fit after self-cal, rms=0.116029Jy sigma=0.000620 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=10.14 mas, bpa=-10.86 degrees ! Estimated noise=1392.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271251 Jy ! Component: 100 - total flux cleaned = 0.000351785 Jy ! Component: 150 - total flux cleaned = 0.000367756 Jy ! Component: 200 - total flux cleaned = 0.000381948 Jy ! Total flux subtracted in 200 components = 0.000381948 Jy ! Clean residual min=-0.003396 max=0.003217 Jy/beam ! Clean residual mean=-0.000000 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.0951301 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 85 components and 0.0951301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116023Jy sigma=0.000620 ! Fit after self-cal, rms=0.116022Jy sigma=0.000620 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136852 Jy ! Component: 100 - total flux cleaned = 0.000118638 Jy ! Component: 150 - total flux cleaned = 0.000119174 Jy ! Component: 200 - total flux cleaned = 0.000133508 Jy ! Total flux subtracted in 200 components = 0.000133508 Jy ! Clean residual min=-0.003375 max=0.003278 Jy/beam ! Clean residual mean=-0.000001 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.0952636 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 85 components and 0.0952636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116017Jy sigma=0.000620 ! Fit after self-cal, rms=0.116015Jy sigma=0.000620 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116015Jy sigma=0.000620 ! Fit after self-cal, rms=0.116510Jy sigma=0.000620 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=10.15 mas, bpa=-10.99 degrees ! Estimated noise=1395.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173672 Jy ! Component: 100 - total flux cleaned = 0.000224972 Jy ! Component: 150 - total flux cleaned = 0.000239529 Jy ! Component: 200 - total flux cleaned = 0.000252203 Jy ! Total flux subtracted in 200 components = 0.000252203 Jy ! Clean residual min=-0.003372 max=0.003355 Jy/beam ! Clean residual mean=-0.000001 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.0955158 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 86 components and 0.0955158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116505Jy sigma=0.000620 ! Fit after self-cal, rms=0.116511Jy sigma=0.000620 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.09922e-06 Jy ! Component: 100 - total flux cleaned = 1.03664e-05 Jy ! Component: 150 - total flux cleaned = 9.16872e-06 Jy ! Component: 200 - total flux cleaned = 9.23495e-06 Jy ! Total flux subtracted in 200 components = 9.23495e-06 Jy ! Clean residual min=-0.003303 max=0.003328 Jy/beam ! Clean residual mean=-0.000001 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.095525 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 87 components and 0.095525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116508Jy sigma=0.000620 ! Fit after self-cal, rms=0.116507Jy sigma=0.000620 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116507Jy sigma=0.000620 ! Fit after self-cal, rms=0.116779Jy sigma=0.000620 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.558 mas, bmaj=24.22 mas, bpa=1.844 degrees ! Estimated noise=1720.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285709 Jy ! Component: 100 - total flux cleaned = 0.000284952 Jy ! Component: 150 - total flux cleaned = 0.000284094 Jy ! Component: 200 - total flux cleaned = 0.000275827 Jy ! Total flux subtracted in 200 components = 0.000275827 Jy ! Clean residual min=-0.003595 max=0.003850 Jy/beam ! Clean residual mean=-0.000001 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.0958008 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 89 components and 0.0958008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116780Jy sigma=0.000620 ! Fit after self-cal, rms=0.116774Jy sigma=0.000620 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.81252e-05 Jy ! Component: 100 - total flux cleaned = -9.06684e-05 Jy ! Component: 150 - total flux cleaned = -0.000101686 Jy ! Component: 200 - total flux cleaned = -0.000119374 Jy ! Total flux subtracted in 200 components = -0.000119374 Jy ! Clean residual min=-0.003612 max=0.003811 Jy/beam ! Clean residual mean=-0.000001 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 0.0956815 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 89 components and 0.0956814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116776Jy sigma=0.000620 ! Fit after self-cal, rms=0.116765Jy sigma=0.000620 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.347 mas, bmaj=10.15 mas, bpa=-11.11 degrees ! Estimated noise=1397.49 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.347 x 10.15 at -11.11 degrees (North through East) ! Clean map min=-0.0031125 max=0.071414 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.659 mas, bmaj=8.509 mas, bpa=-13.19 degrees ! Estimated noise=1946.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0561147 Jy ! Component: 100 - total flux cleaned = 0.0730328 Jy ! Component: 150 - total flux cleaned = 0.0823252 Jy ! Component: 200 - total flux cleaned = 0.0876375 Jy ! Total flux subtracted in 200 components = 0.0876375 Jy ! Clean residual min=-0.004491 max=0.004024 Jy/beam ! Clean residual mean=0.000011 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.0876375 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.0876375 Jy ! Inverting map and beam ! Estimated beam: bmin=3.347 mas, bmaj=10.15 mas, bpa=-11.11 degrees ! Estimated noise=1397.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00484466 Jy ! Component: 100 - total flux cleaned = 0.00687045 Jy ! Component: 150 - total flux cleaned = 0.00781155 Jy ! Component: 200 - total flux cleaned = 0.00824332 Jy ! Total flux subtracted in 200 components = 0.00824332 Jy ! Clean residual min=-0.003236 max=0.003328 Jy/beam ! Clean residual mean=-0.000002 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.0958808 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 57 components and 0.0958808 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.558 mas, bmaj=24.22 mas, bpa=1.844 degrees ! Estimated noise=1720.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121297 Jy ! Component: 100 - total flux cleaned = 8.84365e-05 Jy ! Component: 150 - total flux cleaned = 4.67016e-05 Jy ! Component: 200 - total flux cleaned = 1.15547e-05 Jy ! Total flux subtracted in 200 components = 1.15547e-05 Jy ! Clean residual min=-0.003587 max=0.003890 Jy/beam ! Clean residual mean=-0.000002 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.0958924 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.00642e-05 Jy ! Component: 100 - total flux cleaned = -3.70718e-05 Jy ! Component: 150 - total flux cleaned = -4.46722e-05 Jy ! Component: 200 - total flux cleaned = -5.84965e-05 Jy ! Total flux subtracted in 200 components = -5.84965e-05 Jy ! Clean residual min=-0.003603 max=0.003870 Jy/beam ! Clean residual mean=-0.000002 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.0958339 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 62 components and 0.0958339 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.347 mas, bmaj=10.15 mas, bpa=-11.11 degrees ! Estimated noise=1397.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000119397 Jy ! Component: 100 - total flux cleaned = -7.56042e-05 Jy ! Component: 150 - total flux cleaned = -6.10615e-05 Jy ! Component: 200 - total flux cleaned = -4.86177e-05 Jy ! Total flux subtracted in 200 components = -4.86177e-05 Jy ! Clean residual min=-0.003237 max=0.003338 Jy/beam ! Clean residual mean=-0.000002 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 0.0957853 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 0.0957853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116771Jy sigma=0.000620 ! Fit after self-cal, rms=0.116760Jy sigma=0.000620 wmodel J0721-3528_S_2017_02_19_pus_map.mod ! Writing 72 model components to file: J0721-3528_S_2017_02_19_pus_map.mod wobs J0721-3528_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0721-3528_S_2017_02_19_pus_uvs.fits wwins J0721-3528_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J0721-3528_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000602794 Jy ! Component: 100 - total flux cleaned = 0.000658991 Jy ! Component: 150 - total flux cleaned = 0.000919401 Jy ! Component: 200 - total flux cleaned = 0.00121727 Jy ! Component: 250 - total flux cleaned = 0.00145299 Jy ! Component: 300 - total flux cleaned = 0.00154391 Jy ! Component: 350 - total flux cleaned = 0.00167324 Jy ! Component: 400 - total flux cleaned = 0.00159019 Jy ! Component: 450 - total flux cleaned = 0.00166978 Jy ! Component: 500 - total flux cleaned = 0.00170723 Jy ! Component: 550 - total flux cleaned = 0.00181744 Jy ! Component: 600 - total flux cleaned = 0.0018879 Jy ! Component: 650 - total flux cleaned = 0.00192172 Jy ! Component: 700 - total flux cleaned = 0.00192202 Jy ! Component: 750 - total flux cleaned = 0.00201916 Jy ! Component: 800 - total flux cleaned = 0.00195731 Jy ! Component: 850 - total flux cleaned = 0.00195846 Jy ! Component: 900 - total flux cleaned = 0.00201822 Jy ! Component: 950 - total flux cleaned = 0.00204711 Jy ! Component: 1000 - total flux cleaned = 0.00198985 Jy ! Component: 1050 - total flux cleaned = 0.00201663 Jy ! Component: 1100 - total flux cleaned = 0.00207052 Jy ! Component: 1150 - total flux cleaned = 0.00207029 Jy ! Component: 1200 - total flux cleaned = 0.00217345 Jy ! Component: 1250 - total flux cleaned = 0.00212199 Jy ! Component: 1300 - total flux cleaned = 0.00219698 Jy ! Component: 1350 - total flux cleaned = 0.00226994 Jy ! Component: 1400 - total flux cleaned = 0.00219779 Jy ! Component: 1450 - total flux cleaned = 0.00219844 Jy ! Component: 1500 - total flux cleaned = 0.00226741 Jy ! Component: 1550 - total flux cleaned = 0.00224462 Jy ! Component: 1600 - total flux cleaned = 0.00231128 Jy ! Component: 1650 - total flux cleaned = 0.00233297 Jy ! Component: 1700 - total flux cleaned = 0.00231153 Jy ! Component: 1750 - total flux cleaned = 0.00239668 Jy ! Component: 1800 - total flux cleaned = 0.0024593 Jy ! Component: 1850 - total flux cleaned = 0.00245959 Jy ! Component: 1900 - total flux cleaned = 0.00254119 Jy ! Component: 1950 - total flux cleaned = 0.00254136 Jy ! Component: 2000 - total flux cleaned = 0.00258152 Jy ! Component: 2050 - total flux cleaned = 0.00262121 Jy ! Component: 2100 - total flux cleaned = 0.00273609 Jy ! Component: 2150 - total flux cleaned = 0.00273564 Jy ! Component: 2200 - total flux cleaned = 0.00282907 Jy ! Component: 2250 - total flux cleaned = 0.0028845 Jy ! Component: 2300 - total flux cleaned = 0.00293931 Jy ! Component: 2350 - total flux cleaned = 0.0030295 Jy ! Component: 2400 - total flux cleaned = 0.00311849 Jy ! Component: 2450 - total flux cleaned = 0.00318879 Jy ! Component: 2500 - total flux cleaned = 0.00329312 Jy ! Component: 2550 - total flux cleaned = 0.00329326 Jy ! Component: 2600 - total flux cleaned = 0.00331061 Jy ! Component: 2650 - total flux cleaned = 0.00337814 Jy ! Component: 2700 - total flux cleaned = 0.00339501 Jy ! Component: 2750 - total flux cleaned = 0.0034284 Jy ! Component: 2800 - total flux cleaned = 0.00347753 Jy ! Component: 2850 - total flux cleaned = 0.00346126 Jy ! Component: 2900 - total flux cleaned = 0.00352536 Jy ! Component: 2950 - total flux cleaned = 0.00358859 Jy ! Component: 3000 - total flux cleaned = 0.0036514 Jy ! Component: 3050 - total flux cleaned = 0.00374465 Jy ! Component: 3100 - total flux cleaned = 0.0038218 Jy ! Component: 3150 - total flux cleaned = 0.00391387 Jy ! Component: 3200 - total flux cleaned = 0.0040508 Jy ! Component: 3250 - total flux cleaned = 0.00415654 Jy ! Component: 3300 - total flux cleaned = 0.00420157 Jy ! Component: 3350 - total flux cleaned = 0.00432088 Jy ! Component: 3400 - total flux cleaned = 0.00442471 Jy ! Component: 3450 - total flux cleaned = 0.00449833 Jy ! Component: 3500 - total flux cleaned = 0.00457169 Jy ! Component: 3550 - total flux cleaned = 0.00464463 Jy ! Component: 3600 - total flux cleaned = 0.00473162 Jy ! Component: 3650 - total flux cleaned = 0.00478936 Jy ! Component: 3700 - total flux cleaned = 0.00490418 Jy ! Component: 3750 - total flux cleaned = 0.00496133 Jy ! Component: 3800 - total flux cleaned = 0.00501815 Jy ! Component: 3850 - total flux cleaned = 0.00504643 Jy ! Component: 3900 - total flux cleaned = 0.00510283 Jy ! Component: 3950 - total flux cleaned = 0.00511684 Jy ! Component: 4000 - total flux cleaned = 0.00517285 Jy ! Component: 4050 - total flux cleaned = 0.00520075 Jy ! Total flux subtracted in 4096 components = 0.00524245 Jy ! Clean residual min=-0.000836 max=0.000863 Jy/beam ! Clean residual mean=-0.000000 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.101028 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 329 components and 0.101028 Jy ![Exited script file: muppet] wmap "J0721-3528_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.347 x 10.15 at -11.11 degrees (North through East) ! Clean map min=-0.0017551 max=0.071546 Jy/beam ! Writing clean map to FITS file: J0721-3528_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0715463 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000240403 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00803 1.00803 2.01606 4.03212 8.06424 16.1285 32.257 64.514 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.347 x 10.15 at -11.11 degrees (North through East) ! Clean map min=-0.0017551 max=0.071546 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0721-3528_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:45:33 2019