! Started logfile: J0721+1540_S_2017_04_28_pus_uvs.log on Thu May 2 16:19:54 2019 obs J0721+1540_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0721+1540_S_2017_04_28_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.969125 visibilities/baseline/integration-bin. ! Found source: J0721+1540 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 19712 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0721+1540_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 480 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.832866Jy sigma=0.017479 ! Fit after self-cal, rms=0.826893Jy sigma=0.017449 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=6.713 mas, bpa=-8.506 degrees ! Estimated noise=785.194 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112983 Jy ! Component: 100 - total flux cleaned = 0.136856 Jy ! Total flux subtracted in 100 components = 0.136856 Jy ! Clean residual min=-0.025377 max=0.025384 Jy/beam ! Clean residual mean=0.000139 rms=0.009060 Jy/beam ! Combined flux in latest and established models = 0.136856 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.136856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105101Jy sigma=0.002208 ! Fit after self-cal, rms=0.105094Jy sigma=0.002208 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.562 mas, bmaj=7.434 mas, bpa=-7.363 degrees ! Estimated noise=586.573 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161862 Jy ! Component: 100 - total flux cleaned = 0.0176918 Jy ! Component: 150 - total flux cleaned = 0.0171449 Jy ! Component: 200 - total flux cleaned = 0.0164239 Jy ! Total flux subtracted in 200 components = 0.0164239 Jy ! Clean residual min=-0.022829 max=0.021752 Jy/beam ! Clean residual mean=0.000373 rms=0.006951 Jy/beam ! Combined flux in latest and established models = 0.15328 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 24 components and 0.15328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098827Jy sigma=0.002381 ! Fit after self-cal, rms=0.098818Jy sigma=0.002381 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.90 HN 0.90 KP 0.88 ! LA 0.86 MK 0.92 NL 0.87 OV 0.90 ! PT 0.97 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.83 HN 0.97 KP 0.87 ! LA 0.84 MK 0.91 NL 1.04 OV 0.92 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.87 HN 0.94 KP 0.90 ! LA 0.88 MK 0.95 NL 0.96 OV 0.83 ! PT 0.93 SC 0.99 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.85 HN 0.99 KP 1.00* ! LA 20.94 MK 1.16 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.098818Jy sigma=0.002381 ! Fit after self-cal, rms=0.899264Jy sigma=0.000694 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.491 mas, bmaj=7.348 mas, bpa=-5.29 degrees ! Estimated noise=585.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00367236 Jy ! Component: 100 - total flux cleaned = 0.00579809 Jy ! Component: 150 - total flux cleaned = 0.00709241 Jy ! Component: 200 - total flux cleaned = 0.00742733 Jy ! Total flux subtracted in 200 components = 0.00742733 Jy ! Clean residual min=-0.003542 max=0.003218 Jy/beam ! Clean residual mean=0.000014 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.160707 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 40 components and 0.160707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.898900Jy sigma=0.000693 ! Fit after self-cal, rms=0.899193Jy sigma=0.000688 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.899193Jy sigma=0.000688 ! Fit after self-cal, rms=0.732904Jy sigma=0.000677 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.474 mas, bmaj=7.367 mas, bpa=-5.546 degrees ! Estimated noise=589.162 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192923 Jy ! Component: 100 - total flux cleaned = 0.0030436 Jy ! Component: 150 - total flux cleaned = 0.00365167 Jy ! Component: 200 - total flux cleaned = 0.00377355 Jy ! Total flux subtracted in 200 components = 0.00377355 Jy ! Clean residual min=-0.002170 max=0.002458 Jy/beam ! Clean residual mean=0.000023 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.164481 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.164481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.732761Jy sigma=0.000677 ! Fit after self-cal, rms=0.732777Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136358 Jy ! Component: 100 - total flux cleaned = 0.000189278 Jy ! Component: 150 - total flux cleaned = 0.00025153 Jy ! Component: 200 - total flux cleaned = 0.000295298 Jy ! Total flux subtracted in 200 components = 0.000295298 Jy ! Clean residual min=-0.002134 max=0.002478 Jy/beam ! Clean residual mean=0.000023 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.164776 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.164776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.732760Jy sigma=0.000677 ! Fit after self-cal, rms=0.732760Jy sigma=0.000677 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.732760Jy sigma=0.000677 ! Fit after self-cal, rms=0.077377Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.467 mas, bmaj=7.373 mas, bpa=-5.595 degrees ! Estimated noise=589.226 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000711017 Jy ! Component: 100 - total flux cleaned = 0.00080674 Jy ! Component: 150 - total flux cleaned = 0.000836039 Jy ! Component: 200 - total flux cleaned = 0.000848287 Jy ! Total flux subtracted in 200 components = 0.000848287 Jy ! Clean residual min=-0.001584 max=0.002558 Jy/beam ! Clean residual mean=0.000011 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.165624 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 0.165624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077368Jy sigma=0.000664 ! Fit after self-cal, rms=0.077324Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, -10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214971 Jy ! Component: 100 - total flux cleaned = 0.00278962 Jy ! Component: 150 - total flux cleaned = 0.0029424 Jy ! Component: 200 - total flux cleaned = 0.00306549 Jy ! Total flux subtracted in 200 components = 0.00306549 Jy ! Clean residual min=-0.001483 max=0.001600 Jy/beam ! Clean residual mean=0.000012 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.16869 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 67 components and 0.16869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077260Jy sigma=0.000663 ! Fit after self-cal, rms=0.077255Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077255Jy sigma=0.000663 ! Fit after self-cal, rms=0.077302Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.451 mas, bmaj=10.42 mas, bpa=-3.168 degrees ! Estimated noise=723.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102757 Jy ! Component: 100 - total flux cleaned = 0.00156364 Jy ! Component: 150 - total flux cleaned = 0.00189588 Jy ! Component: 200 - total flux cleaned = 0.00202289 Jy ! Total flux subtracted in 200 components = 0.00202289 Jy ! Clean residual min=-0.001520 max=0.001639 Jy/beam ! Clean residual mean=0.000022 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.170713 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 79 components and 0.170713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077292Jy sigma=0.000663 ! Fit after self-cal, rms=0.077292Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000354831 Jy ! Component: 100 - total flux cleaned = 0.000491477 Jy ! Component: 150 - total flux cleaned = 0.000520143 Jy ! Component: 200 - total flux cleaned = 0.000540561 Jy ! Total flux subtracted in 200 components = 0.000540561 Jy ! Clean residual min=-0.001508 max=0.001583 Jy/beam ! Clean residual mean=0.000023 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.171253 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 90 components and 0.171253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077291Jy sigma=0.000663 ! Fit after self-cal, rms=0.077290Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.463 mas, bmaj=7.37 mas, bpa=-5.658 degrees ! Estimated noise=588.819 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.463 x 7.37 at -5.658 degrees (North through East) ! Clean map min=-0.0013504 max=0.15298 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=6.65 mas, bpa=-6.271 degrees ! Estimated noise=818.358 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118183 Jy ! Component: 100 - total flux cleaned = 0.144913 Jy ! Component: 150 - total flux cleaned = 0.155507 Jy ! Component: 200 - total flux cleaned = 0.16123 Jy ! Total flux subtracted in 200 components = 0.16123 Jy ! Clean residual min=-0.002180 max=0.002924 Jy/beam ! Clean residual mean=0.000004 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.16123 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.16123 Jy ! Inverting map and beam ! Estimated beam: bmin=3.463 mas, bmaj=7.37 mas, bpa=-5.658 degrees ! Estimated noise=588.819 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00373606 Jy ! Component: 100 - total flux cleaned = 0.00590377 Jy ! Component: 150 - total flux cleaned = 0.00733254 Jy ! Component: 200 - total flux cleaned = 0.00795657 Jy ! Total flux subtracted in 200 components = 0.00795657 Jy ! Clean residual min=-0.001665 max=0.001554 Jy/beam ! Clean residual mean=0.000011 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.169187 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 40 components and 0.169187 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.451 mas, bmaj=10.42 mas, bpa=-3.168 degrees ! Estimated noise=723.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119149 Jy ! Component: 100 - total flux cleaned = 0.00181478 Jy ! Component: 150 - total flux cleaned = 0.00198668 Jy ! Component: 200 - total flux cleaned = 0.00207845 Jy ! Total flux subtracted in 200 components = 0.00207845 Jy ! Clean residual min=-0.001527 max=0.001618 Jy/beam ! Clean residual mean=0.000023 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.171265 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.45358e-05 Jy ! Component: 100 - total flux cleaned = 0.00011948 Jy ! Component: 150 - total flux cleaned = 0.000148348 Jy ! Component: 200 - total flux cleaned = 0.000174054 Jy ! Total flux subtracted in 200 components = 0.000174054 Jy ! Clean residual min=-0.001518 max=0.001586 Jy/beam ! Clean residual mean=0.000023 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.171439 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 69 components and 0.171439 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.463 mas, bmaj=7.37 mas, bpa=-5.658 degrees ! Estimated noise=588.819 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000196764 Jy ! Component: 100 - total flux cleaned = -0.000150985 Jy ! Component: 150 - total flux cleaned = -0.000129139 Jy ! Component: 200 - total flux cleaned = -0.000147473 Jy ! Total flux subtracted in 200 components = -0.000147473 Jy ! Clean residual min=-0.001501 max=0.001566 Jy/beam ! Clean residual mean=0.000011 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.171292 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 88 components and 0.171292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077294Jy sigma=0.000663 ! Fit after self-cal, rms=0.077287Jy sigma=0.000663 wmodel J0721+1540_S_2017_04_28_pus_map.mod ! Writing 88 model components to file: J0721+1540_S_2017_04_28_pus_map.mod wobs J0721+1540_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0721+1540_S_2017_04_28_pus_uvs.fits wwins J0721+1540_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J0721+1540_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000519887 Jy ! Component: 100 - total flux cleaned = 0.000811351 Jy ! Component: 150 - total flux cleaned = 0.00101331 Jy ! Component: 200 - total flux cleaned = 0.00110995 Jy ! Component: 250 - total flux cleaned = 0.00120384 Jy ! Component: 300 - total flux cleaned = 0.00136395 Jy ! Component: 350 - total flux cleaned = 0.0014531 Jy ! Component: 400 - total flux cleaned = 0.00153964 Jy ! Component: 450 - total flux cleaned = 0.00158165 Jy ! Component: 500 - total flux cleaned = 0.00160196 Jy ! Component: 550 - total flux cleaned = 0.0015616 Jy ! Component: 600 - total flux cleaned = 0.00160132 Jy ! Component: 650 - total flux cleaned = 0.00160108 Jy ! Component: 700 - total flux cleaned = 0.00158171 Jy ! Component: 750 - total flux cleaned = 0.00152487 Jy ! Component: 800 - total flux cleaned = 0.00150636 Jy ! Component: 850 - total flux cleaned = 0.0014331 Jy ! Component: 900 - total flux cleaned = 0.00141498 Jy ! Component: 950 - total flux cleaned = 0.00137918 Jy ! Component: 1000 - total flux cleaned = 0.00132644 Jy ! Component: 1050 - total flux cleaned = 0.00125751 Jy ! Component: 1100 - total flux cleaned = 0.00122338 Jy ! Component: 1150 - total flux cleaned = 0.00120649 Jy ! Component: 1200 - total flux cleaned = 0.00117303 Jy ! Component: 1250 - total flux cleaned = 0.00117312 Jy ! Component: 1300 - total flux cleaned = 0.00114043 Jy ! Component: 1350 - total flux cleaned = 0.00115669 Jy ! Component: 1400 - total flux cleaned = 0.00117257 Jy ! Component: 1450 - total flux cleaned = 0.00117246 Jy ! Component: 1500 - total flux cleaned = 0.00117237 Jy ! Component: 1550 - total flux cleaned = 0.00112601 Jy ! Component: 1600 - total flux cleaned = 0.00111067 Jy ! Component: 1650 - total flux cleaned = 0.00111063 Jy ! Component: 1700 - total flux cleaned = 0.00109574 Jy ! Component: 1750 - total flux cleaned = 0.00109557 Jy ! Component: 1800 - total flux cleaned = 0.00108066 Jy ! Component: 1850 - total flux cleaned = 0.00100737 Jy ! Component: 1900 - total flux cleaned = 0.000992879 Jy ! Component: 1950 - total flux cleaned = 0.00096409 Jy ! Component: 2000 - total flux cleaned = 0.000964037 Jy ! Component: 2050 - total flux cleaned = 0.000865038 Jy ! Component: 2100 - total flux cleaned = 0.000864966 Jy ! Component: 2150 - total flux cleaned = 0.000823188 Jy ! Component: 2200 - total flux cleaned = 0.000795349 Jy ! Component: 2250 - total flux cleaned = 0.000781369 Jy ! Component: 2300 - total flux cleaned = 0.000740495 Jy ! Component: 2350 - total flux cleaned = 0.000659588 Jy ! Component: 2400 - total flux cleaned = 0.000646241 Jy ! Component: 2450 - total flux cleaned = 0.000659335 Jy ! Component: 2500 - total flux cleaned = 0.000593501 Jy ! Component: 2550 - total flux cleaned = 0.000488839 Jy ! Component: 2600 - total flux cleaned = 0.000462992 Jy ! Component: 2650 - total flux cleaned = 0.000450288 Jy ! Component: 2700 - total flux cleaned = 0.000437428 Jy ! Component: 2750 - total flux cleaned = 0.000373929 Jy ! Component: 2800 - total flux cleaned = 0.000336225 Jy ! Component: 2850 - total flux cleaned = 0.000310975 Jy ! Component: 2900 - total flux cleaned = 0.000261289 Jy ! Component: 2950 - total flux cleaned = 0.000261494 Jy ! Component: 3000 - total flux cleaned = 0.000237048 Jy ! Component: 3050 - total flux cleaned = 0.000224849 Jy ! Component: 3100 - total flux cleaned = 0.000237114 Jy ! Component: 3150 - total flux cleaned = 0.000164914 Jy ! Component: 3200 - total flux cleaned = 0.000129154 Jy ! Component: 3250 - total flux cleaned = 0.000129257 Jy ! Component: 3300 - total flux cleaned = 0.000152934 Jy ! Component: 3350 - total flux cleaned = 9.44631e-05 Jy ! Component: 3400 - total flux cleaned = 0.000129343 Jy ! Component: 3450 - total flux cleaned = 7.15074e-05 Jy ! Component: 3500 - total flux cleaned = 4.85974e-05 Jy ! Component: 3550 - total flux cleaned = 3.72797e-05 Jy ! Component: 3600 - total flux cleaned = 5.99437e-05 Jy ! Component: 3650 - total flux cleaned = 4.86493e-05 Jy ! Component: 3700 - total flux cleaned = 2.62264e-05 Jy ! Component: 3750 - total flux cleaned = 2.61737e-05 Jy ! Component: 3800 - total flux cleaned = -2.92078e-05 Jy ! Component: 3850 - total flux cleaned = -2.92651e-05 Jy ! Component: 3900 - total flux cleaned = -2.91464e-05 Jy ! Component: 3950 - total flux cleaned = -1.8339e-05 Jy ! Component: 4000 - total flux cleaned = -5.07246e-05 Jy ! Component: 4050 - total flux cleaned = -6.1552e-05 Jy ! Total flux subtracted in 4096 components = -8.29865e-05 Jy ! Clean residual min=-0.000600 max=0.000653 Jy/beam ! Clean residual mean=0.000001 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.171209 Jy keep ! Adding 327 model components to the UV plane model. ! The established model now contains 415 components and 0.171209 Jy ![Exited script file: muppet] wmap "J0721+1540_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.463 x 7.37 at -5.658 degrees (North through East) ! Clean map min=-0.0010308 max=0.15286 Jy/beam ! Writing clean map to FITS file: J0721+1540_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.152861 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00019691 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.38645 0.38645 0.7729 1.5458 3.0916 6.1832 12.3664 24.7328 49.4656 98.9311 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.152 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.463 x 7.37 at -5.658 degrees (North through East) ! Clean map min=-0.0010308 max=0.15286 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0721+1540_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:19:59 2019