! Started logfile: J0719-3928_S_2017_09_26_pus_uvs.log on Sat May 11 12:56:59 2019 obs J0719-3928_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0719-3928_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.162132 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0719-3928 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 6864 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0719-3928_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1486 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1486 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1486 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2646 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.820963Jy sigma=0.005038 ! Fit after self-cal, rms=0.789553Jy sigma=0.004879 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=15.28 mas, bmaj=50.83 mas, bpa=-1.48 degrees ! Estimated noise=1704.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.170796 Jy ! Component: 100 - total flux cleaned = 0.225315 Jy ! Total flux subtracted in 100 components = 0.225315 Jy ! Clean residual min=-0.016135 max=0.026412 Jy/beam ! Clean residual mean=-0.000622 rms=0.009394 Jy/beam ! Combined flux in latest and established models = 0.225315 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 54 components and 0.225315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112007Jy sigma=0.000677 ! Fit after self-cal, rms=0.111739Jy sigma=0.000676 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=15.33 mas, bmaj=50.72 mas, bpa=0.114 degrees ! Estimated noise=1607.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0335454 Jy ! Component: 100 - total flux cleaned = 0.0528257 Jy ! Component: 150 - total flux cleaned = 0.064124 Jy ! Component: 200 - total flux cleaned = 0.0660328 Jy ! Total flux subtracted in 200 components = 0.0660328 Jy ! Clean residual min=-0.004083 max=0.004103 Jy/beam ! Clean residual mean=-0.000311 rms=0.002282 Jy/beam ! Combined flux in latest and established models = 0.291348 Jy ! Performing phase self-cal ! Adding 103 model components to the UV plane model. ! The established model now contains 156 components and 0.291348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101029Jy sigma=0.000610 ! Fit after self-cal, rms=0.100751Jy sigma=0.000608 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.04 ! LA 1.01 MK 1.00* NL 1.00* OV 1.03 ! PT 0.98 ! ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.98 ! LA 0.95 MK 1.00* NL 1.00* OV 1.09 ! PT 0.96 ! ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.02 ! LA 0.96 MK 1.00* NL 1.00* OV 0.95 ! PT 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.100751Jy sigma=0.000608 ! Fit after self-cal, rms=0.098531Jy sigma=0.000604 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=15.55 mas, bmaj=51 mas, bpa=-0.6985 degrees ! Estimated noise=1608.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.17192e-06 Jy ! Component: 100 - total flux cleaned = -0.000665607 Jy ! Component: 150 - total flux cleaned = -0.0011771 Jy ! Component: 200 - total flux cleaned = -0.00135193 Jy ! Total flux subtracted in 200 components = -0.00135193 Jy ! Clean residual min=-0.000837 max=0.000840 Jy/beam ! Clean residual mean=-0.000052 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.289996 Jy ! Performing phase self-cal ! Adding 89 model components to the UV plane model. ! The established model now contains 245 components and 0.289996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098378Jy sigma=0.000603 ! Fit after self-cal, rms=0.098445Jy sigma=0.000603 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098445Jy sigma=0.000603 ! Fit after self-cal, rms=0.098635Jy sigma=0.000602 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=15.55 mas, bmaj=51.02 mas, bpa=-0.6739 degrees ! Estimated noise=1610.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000684001 Jy ! Component: 100 - total flux cleaned = 0.000427369 Jy ! Component: 150 - total flux cleaned = 0.000208823 Jy ! Component: 200 - total flux cleaned = 1.39827e-05 Jy ! Total flux subtracted in 200 components = 1.39827e-05 Jy ! Clean residual min=-0.000387 max=0.000385 Jy/beam ! Clean residual mean=-0.000017 rms=0.000162 Jy/beam ! Combined flux in latest and established models = 0.29001 Jy selfcal ! Performing phase self-cal ! Adding 86 model components to the UV plane model. ! The established model now contains 331 components and 0.290009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098616Jy sigma=0.000602 ! Fit after self-cal, rms=0.098625Jy sigma=0.000602 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.5357e-05 Jy ! Component: 100 - total flux cleaned = -9.62263e-05 Jy ! Component: 150 - total flux cleaned = -0.000154915 Jy ! Component: 200 - total flux cleaned = -0.000191255 Jy ! Total flux subtracted in 200 components = -0.000191255 Jy ! Clean residual min=-0.000293 max=0.000293 Jy/beam ! Clean residual mean=-0.000011 rms=0.000126 Jy/beam ! Combined flux in latest and established models = 0.289818 Jy ! Performing phase self-cal ! Adding 67 model components to the UV plane model. ! The established model now contains 393 components and 0.289818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098617Jy sigma=0.000602 ! Fit after self-cal, rms=0.098616Jy sigma=0.000602 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098616Jy sigma=0.000602 ! Fit after self-cal, rms=0.098634Jy sigma=0.000602 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=15.55 mas, bmaj=51.02 mas, bpa=-0.6874 degrees ! Estimated noise=1610.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.00867e-05 Jy ! Component: 100 - total flux cleaned = -0.00015412 Jy ! Component: 150 - total flux cleaned = -0.000170465 Jy ! Component: 200 - total flux cleaned = -0.000202462 Jy ! Total flux subtracted in 200 components = -0.000202462 Jy ! Clean residual min=-0.000263 max=0.000263 Jy/beam ! Clean residual mean=-0.000010 rms=0.000110 Jy/beam ! Combined flux in latest and established models = 0.289616 Jy selfcal ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 456 components and 0.289616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098629Jy sigma=0.000602 ! Fit after self-cal, rms=0.098628Jy sigma=0.000602 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.22109e-05 Jy ! Component: 100 - total flux cleaned = -0.000110899 Jy ! Component: 150 - total flux cleaned = -0.000172139 Jy ! Component: 200 - total flux cleaned = -0.000217564 Jy ! Total flux subtracted in 200 components = -0.000217564 Jy ! Clean residual min=-0.000252 max=0.000250 Jy/beam ! Clean residual mean=-0.000010 rms=0.000101 Jy/beam ! Combined flux in latest and established models = 0.289398 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 502 components and 0.289398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098624Jy sigma=0.000602 ! Fit after self-cal, rms=0.098624Jy sigma=0.000602 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098624Jy sigma=0.000602 ! Fit after self-cal, rms=0.098617Jy sigma=0.000602 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=16.03 mas, bmaj=52.19 mas, bpa=-1.257 degrees ! Estimated noise=1614.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.7678e-06 Jy ! Component: 100 - total flux cleaned = 7.01362e-06 Jy ! Component: 150 - total flux cleaned = 6.73508e-06 Jy ! Component: 200 - total flux cleaned = 2.11573e-05 Jy ! Total flux subtracted in 200 components = 2.11573e-05 Jy ! Clean residual min=-0.000236 max=0.000235 Jy/beam ! Clean residual mean=-0.000008 rms=0.000096 Jy/beam ! Combined flux in latest and established models = 0.289419 Jy selfcal ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 540 components and 0.289419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098613Jy sigma=0.000602 ! Fit after self-cal, rms=0.098613Jy sigma=0.000602 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.15241e-05 Jy ! Component: 100 - total flux cleaned = -4.56633e-05 Jy ! Component: 150 - total flux cleaned = -8.73968e-05 Jy ! Component: 200 - total flux cleaned = -0.000127723 Jy ! Total flux subtracted in 200 components = -0.000127723 Jy ! Clean residual min=-0.000222 max=0.000226 Jy/beam ! Clean residual mean=-0.000008 rms=0.000091 Jy/beam ! Combined flux in latest and established models = 0.289292 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 574 components and 0.289292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098609Jy sigma=0.000602 ! Fit after self-cal, rms=0.098609Jy sigma=0.000602 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=15.55 mas, bmaj=51.01 mas, bpa=-0.6841 degrees ! Estimated noise=1610.59 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 15.55 x 51.01 at -0.6841 degrees (North through East) ! Clean map min=-0.0020359 max=0.21691 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=15.34 mas, bmaj=51.14 mas, bpa=-1.673 degrees ! Estimated noise=1695.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.167497 Jy ! Component: 100 - total flux cleaned = 0.221599 Jy ! Component: 150 - total flux cleaned = 0.252441 Jy ! Component: 200 - total flux cleaned = 0.270629 Jy ! Total flux subtracted in 200 components = 0.270629 Jy ! Clean residual min=-0.006093 max=0.009203 Jy/beam ! Clean residual mean=-0.000275 rms=0.003358 Jy/beam ! Combined flux in latest and established models = 0.270629 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 59 model components to the UV plane model. ! The established model now contains 59 components and 0.270629 Jy ! Inverting map and beam ! Estimated beam: bmin=15.55 mas, bmaj=51.01 mas, bpa=-0.6841 degrees ! Estimated noise=1610.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011338 Jy ! Component: 100 - total flux cleaned = 0.0162347 Jy ! Component: 150 - total flux cleaned = 0.0185005 Jy ! Component: 200 - total flux cleaned = 0.017268 Jy ! Total flux subtracted in 200 components = 0.017268 Jy ! Clean residual min=-0.001533 max=0.001541 Jy/beam ! Clean residual mean=-0.000143 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.287897 Jy ! Adding 94 model components to the UV plane model. ! The established model now contains 144 components and 0.287897 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=16.03 mas, bmaj=52.19 mas, bpa=-1.257 degrees ! Estimated noise=1614.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000476672 Jy ! Component: 100 - total flux cleaned = -0.00121871 Jy ! Component: 150 - total flux cleaned = -0.00218246 Jy ! Component: 200 - total flux cleaned = -0.00301938 Jy ! Total flux subtracted in 200 components = -0.00301938 Jy ! Clean residual min=-0.000688 max=0.000688 Jy/beam ! Clean residual mean=-0.000070 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.284877 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000825075 Jy ! Component: 100 - total flux cleaned = -0.00164026 Jy ! Component: 150 - total flux cleaned = -0.00228666 Jy ! Component: 200 - total flux cleaned = -0.00284972 Jy ! Total flux subtracted in 200 components = -0.00284972 Jy ! Clean residual min=-0.000476 max=0.000473 Jy/beam ! Clean residual mean=-0.000048 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.282028 Jy ! Adding 222 model components to the UV plane model. ! The established model now contains 360 components and 0.282028 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=15.55 mas, bmaj=51.01 mas, bpa=-0.6841 degrees ! Estimated noise=1610.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000475075 Jy ! Component: 100 - total flux cleaned = -0.0008954 Jy ! Component: 150 - total flux cleaned = -0.00129958 Jy ! Component: 200 - total flux cleaned = -0.00157601 Jy ! Total flux subtracted in 200 components = -0.00157601 Jy ! Clean residual min=-0.000317 max=0.000318 Jy/beam ! Clean residual mean=-0.000016 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.280452 Jy selfcal ! Performing phase self-cal ! Adding 79 model components to the UV plane model. ! The established model now contains 437 components and 0.280452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098625Jy sigma=0.000602 ! Fit after self-cal, rms=0.098621Jy sigma=0.000602 wmodel J0719-3928_S_2017_09_26_pus_map.mod ! Writing 437 model components to file: J0719-3928_S_2017_09_26_pus_map.mod wobs J0719-3928_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0719-3928_S_2017_09_26_pus_uvs.fits wwins J0719-3928_S_2017_09_26_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0719-3928_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 15.55 x 51.01 at -0.6841 degrees (North through East) ! Clean map min=-0.0024488 max=0.21627 Jy/beam ! Writing clean map to FITS file: J0719-3928_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.216271 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000148061 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.205382 0.205382 0.410764 0.821529 1.64306 3.28611 6.57223 13.1445 26.2889 52.5778 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.216 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 15.55 x 51.01 at -0.6841 degrees (North through East) ! Clean map min=-0.0024488 max=0.21627 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0719-3928_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:57:05 2019