! Started logfile: J0719-3928_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:07:58 2019 obs J0719-3928_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0719-3928_S_2017_01_16_pus_uva.fits ! AN table 1: 106 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.518658 visibilities/baseline/integration-bin. ! Found source: J0719-3928 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 9896 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0719-3928_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 359 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 367 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 363 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 553 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.936729Jy sigma=0.004929 ! Fit after self-cal, rms=0.889975Jy sigma=0.004722 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=10.55 mas, bpa=18.84 degrees ! Estimated noise=6879.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101301 Jy ! Component: 100 - total flux cleaned = 0.136499 Jy ! Total flux subtracted in 100 components = 0.136499 Jy ! Clean residual min=-0.023297 max=0.027220 Jy/beam ! Clean residual mean=-0.000363 rms=0.006439 Jy/beam ! Combined flux in latest and established models = 0.136499 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.136499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151299Jy sigma=0.000749 ! Fit after self-cal, rms=0.151021Jy sigma=0.000747 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.979 mas, bmaj=24.08 mas, bpa=26.99 degrees ! Estimated noise=1505.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0342598 Jy ! Component: 100 - total flux cleaned = 0.0530877 Jy ! Component: 150 - total flux cleaned = 0.0620763 Jy ! Component: 200 - total flux cleaned = 0.0637413 Jy ! Total flux subtracted in 200 components = 0.0637413 Jy ! Clean residual min=-0.011887 max=0.023647 Jy/beam ! Clean residual mean=-0.000491 rms=0.005338 Jy/beam ! Combined flux in latest and established models = 0.20024 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.20024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144764Jy sigma=0.000691 ! Fit after self-cal, rms=0.144228Jy sigma=0.000687 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.67 FD 0.93 HN 1.15 KP 0.94 ! LA 0.89 MK 1.00* NL 1.53 OV 1.25 ! PT 0.85 SC 1.16 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.90 FD 0.95 HN 1.00* KP 0.94 ! LA 0.84 MK 1.00* NL 1.90 OV 1.31 ! PT 0.84 SC 1.32 ! ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.66 FD 0.95 HN 0.61 KP 0.93 ! LA 0.91 MK 1.00* NL 1.90 OV 1.13 ! PT 0.86 SC 1.07 ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.53 FD 1.00 HN 0.32 KP 1.03 ! LA 0.83 MK 1.00* NL 1.00* OV 1.14 ! PT 0.87 SC 0.59 ! ! ! Fit before self-cal, rms=0.144228Jy sigma=0.000687 ! Fit after self-cal, rms=0.223885Jy sigma=0.000653 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.032 mas, bmaj=25.84 mas, bpa=27.54 degrees ! Estimated noise=1659.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187634 Jy ! Component: 100 - total flux cleaned = 0.00238912 Jy ! Component: 150 - total flux cleaned = 0.00295318 Jy ! Component: 200 - total flux cleaned = 0.00345468 Jy ! Total flux subtracted in 200 components = 0.00345468 Jy ! Clean residual min=-0.007057 max=0.013622 Jy/beam ! Clean residual mean=0.000051 rms=0.002789 Jy/beam ! Combined flux in latest and established models = 0.203695 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.203695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223804Jy sigma=0.000652 ! Fit after self-cal, rms=0.225694Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225694Jy sigma=0.000651 ! Fit after self-cal, rms=0.229935Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.041 mas, bmaj=25.5 mas, bpa=27.41 degrees ! Estimated noise=1671.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013453 Jy ! Component: 100 - total flux cleaned = 0.00184672 Jy ! Component: 150 - total flux cleaned = 0.00237555 Jy ! Component: 200 - total flux cleaned = 0.00269365 Jy ! Total flux subtracted in 200 components = 0.00269365 Jy ! Clean residual min=-0.005767 max=0.009814 Jy/beam ! Clean residual mean=0.000083 rms=0.002471 Jy/beam ! Combined flux in latest and established models = 0.206388 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.206388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229879Jy sigma=0.000649 ! Fit after self-cal, rms=0.229913Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000409104 Jy ! Component: 100 - total flux cleaned = 0.000724874 Jy ! Component: 150 - total flux cleaned = 0.00100808 Jy ! Component: 200 - total flux cleaned = 0.00126693 Jy ! Total flux subtracted in 200 components = 0.00126693 Jy ! Clean residual min=-0.005635 max=0.009308 Jy/beam ! Clean residual mean=0.000091 rms=0.002432 Jy/beam ! Combined flux in latest and established models = 0.207655 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.207655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229880Jy sigma=0.000648 ! Fit after self-cal, rms=0.229847Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229847Jy sigma=0.000648 ! Fit after self-cal, rms=0.224038Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.052 mas, bmaj=25.34 mas, bpa=27.29 degrees ! Estimated noise=1669.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116709 Jy ! Component: 100 - total flux cleaned = 0.00160004 Jy ! Component: 150 - total flux cleaned = 0.00198774 Jy ! Component: 200 - total flux cleaned = 0.00233539 Jy ! Total flux subtracted in 200 components = 0.00233539 Jy ! Clean residual min=-0.005656 max=0.009344 Jy/beam ! Clean residual mean=0.000071 rms=0.002342 Jy/beam ! Combined flux in latest and established models = 0.209991 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 47 components and 0.20999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223993Jy sigma=0.000647 ! Fit after self-cal, rms=0.223852Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000395394 Jy ! Component: 100 - total flux cleaned = 0.000743414 Jy ! Component: 150 - total flux cleaned = 0.000995481 Jy ! Component: 200 - total flux cleaned = 0.00116768 Jy ! Total flux subtracted in 200 components = 0.00116768 Jy ! Clean residual min=-0.005450 max=0.009031 Jy/beam ! Clean residual mean=0.000082 rms=0.002324 Jy/beam ! Combined flux in latest and established models = 0.211158 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.211158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223822Jy sigma=0.000647 ! Fit after self-cal, rms=0.223762Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223762Jy sigma=0.000647 ! Fit after self-cal, rms=0.218702Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.57 mas, bmaj=43.17 mas, bpa=13.81 degrees ! Estimated noise=1788.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251766 Jy ! Component: 100 - total flux cleaned = 0.00287801 Jy ! Component: 150 - total flux cleaned = 0.00319726 Jy ! Component: 200 - total flux cleaned = 0.00348122 Jy ! Total flux subtracted in 200 components = 0.00348122 Jy ! Clean residual min=-0.006090 max=0.010334 Jy/beam ! Clean residual mean=0.000098 rms=0.002884 Jy/beam ! Combined flux in latest and established models = 0.214639 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 0.214639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218683Jy sigma=0.000647 ! Fit after self-cal, rms=0.218482Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000498146 Jy ! Component: 100 - total flux cleaned = 0.000773729 Jy ! Component: 150 - total flux cleaned = 0.0010175 Jy ! Component: 200 - total flux cleaned = 0.00124071 Jy ! Total flux subtracted in 200 components = 0.00124071 Jy ! Clean residual min=-0.006084 max=0.010033 Jy/beam ! Clean residual mean=0.000115 rms=0.002883 Jy/beam ! Combined flux in latest and established models = 0.21588 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 67 components and 0.21588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218468Jy sigma=0.000646 ! Fit after self-cal, rms=0.218412Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.07 mas, bmaj=25.04 mas, bpa=27.14 degrees ! Estimated noise=1668.03 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.07 x 25.04 at 27.14 degrees (North through East) ! Clean map min=-0.0054766 max=0.097537 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.002 mas, bmaj=10.23 mas, bpa=14.59 degrees ! Estimated noise=5955.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0818559 Jy ! Component: 100 - total flux cleaned = 0.120535 Jy ! Component: 150 - total flux cleaned = 0.146347 Jy ! Component: 200 - total flux cleaned = 0.16459 Jy ! Total flux subtracted in 200 components = 0.16459 Jy ! Clean residual min=-0.016059 max=0.015160 Jy/beam ! Clean residual mean=-0.000129 rms=0.004537 Jy/beam ! Combined flux in latest and established models = 0.16459 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 58 model components to the UV plane model. ! The established model now contains 58 components and 0.16459 Jy ! Inverting map and beam ! Estimated beam: bmin=4.07 mas, bmaj=25.04 mas, bpa=27.14 degrees ! Estimated noise=1668.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.5, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0245618 Jy ! Component: 100 - total flux cleaned = 0.0390868 Jy ! Component: 150 - total flux cleaned = 0.0481451 Jy ! Component: 200 - total flux cleaned = 0.0539762 Jy ! Total flux subtracted in 200 components = 0.0539762 Jy ! Clean residual min=-0.006056 max=0.005919 Jy/beam ! Clean residual mean=0.000109 rms=0.001983 Jy/beam ! Combined flux in latest and established models = 0.218567 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 114 components and 0.218567 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.57 mas, bmaj=43.17 mas, bpa=13.81 degrees ! Estimated noise=1788.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00297857 Jy ! Component: 100 - total flux cleaned = 0.00432092 Jy ! Component: 150 - total flux cleaned = 0.00500294 Jy ! Component: 200 - total flux cleaned = 0.00537185 Jy ! Total flux subtracted in 200 components = 0.00537185 Jy ! Clean residual min=-0.006662 max=0.007409 Jy/beam ! Clean residual mean=0.000209 rms=0.002523 Jy/beam ! Combined flux in latest and established models = 0.223938 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000240397 Jy ! Component: 100 - total flux cleaned = 0.000435307 Jy ! Component: 150 - total flux cleaned = 0.000467421 Jy ! Component: 200 - total flux cleaned = 0.000528658 Jy ! Total flux subtracted in 200 components = 0.000528658 Jy ! Clean residual min=-0.006757 max=0.007551 Jy/beam ! Clean residual mean=0.000215 rms=0.002536 Jy/beam ! Combined flux in latest and established models = 0.224467 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 207 components and 0.224467 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.07 mas, bmaj=25.04 mas, bpa=27.14 degrees ! Estimated noise=1668.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.2322e-05 Jy ! Component: 100 - total flux cleaned = 0.000263782 Jy ! Component: 150 - total flux cleaned = 0.000444917 Jy ! Component: 200 - total flux cleaned = 0.000405053 Jy ! Total flux subtracted in 200 components = 0.000405053 Jy ! Clean residual min=-0.006331 max=0.006506 Jy/beam ! Clean residual mean=0.000153 rms=0.001925 Jy/beam ! Combined flux in latest and established models = 0.224872 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 226 components and 0.224872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218042Jy sigma=0.000644 ! Fit after self-cal, rms=0.217659Jy sigma=0.000643 wmodel J0719-3928_S_2017_01_16_pus_map.mod ! Writing 226 model components to file: J0719-3928_S_2017_01_16_pus_map.mod wobs J0719-3928_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0719-3928_S_2017_01_16_pus_uvs.fits wwins J0719-3928_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J0719-3928_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000671993 Jy ! Component: 100 - total flux cleaned = 0.00136595 Jy ! Component: 150 - total flux cleaned = 0.00180853 Jy ! Component: 200 - total flux cleaned = 0.00213845 Jy ! Component: 250 - total flux cleaned = 0.00267366 Jy ! Component: 300 - total flux cleaned = 0.00289013 Jy ! Component: 350 - total flux cleaned = 0.00351407 Jy ! Component: 400 - total flux cleaned = 0.00411159 Jy ! Component: 450 - total flux cleaned = 0.00423942 Jy ! Component: 500 - total flux cleaned = 0.00424069 Jy ! Component: 550 - total flux cleaned = 0.00430177 Jy ! Component: 600 - total flux cleaned = 0.00430119 Jy ! Component: 650 - total flux cleaned = 0.00419112 Jy ! Component: 700 - total flux cleaned = 0.00419208 Jy ! Component: 750 - total flux cleaned = 0.00413984 Jy ! Component: 800 - total flux cleaned = 0.00413992 Jy ! Component: 850 - total flux cleaned = 0.00438327 Jy ! Component: 900 - total flux cleaned = 0.00424179 Jy ! Component: 950 - total flux cleaned = 0.00419511 Jy ! Component: 1000 - total flux cleaned = 0.00405806 Jy ! Component: 1050 - total flux cleaned = 0.00383543 Jy ! Component: 1100 - total flux cleaned = 0.00383533 Jy ! Component: 1150 - total flux cleaned = 0.00374879 Jy ! Component: 1200 - total flux cleaned = 0.00366429 Jy ! Component: 1250 - total flux cleaned = 0.00349957 Jy ! Component: 1300 - total flux cleaned = 0.00329863 Jy ! Component: 1350 - total flux cleaned = 0.00318127 Jy ! Component: 1400 - total flux cleaned = 0.00333553 Jy ! Component: 1450 - total flux cleaned = 0.00337198 Jy ! Component: 1500 - total flux cleaned = 0.003222 Jy ! Component: 1550 - total flux cleaned = 0.00322238 Jy ! Component: 1600 - total flux cleaned = 0.00318697 Jy ! Component: 1650 - total flux cleaned = 0.00315196 Jy ! Component: 1700 - total flux cleaned = 0.00308204 Jy ! Component: 1750 - total flux cleaned = 0.00297884 Jy ! Component: 1800 - total flux cleaned = 0.00297916 Jy ! Component: 1850 - total flux cleaned = 0.00291236 Jy ! Component: 1900 - total flux cleaned = 0.00284638 Jy ! Component: 1950 - total flux cleaned = 0.00281395 Jy ! Component: 2000 - total flux cleaned = 0.00274949 Jy ! Component: 2050 - total flux cleaned = 0.00268606 Jy ! Component: 2100 - total flux cleaned = 0.00265456 Jy ! Component: 2150 - total flux cleaned = 0.00259323 Jy ! Component: 2200 - total flux cleaned = 0.00259372 Jy ! Component: 2250 - total flux cleaned = 0.00250306 Jy ! Component: 2300 - total flux cleaned = 0.00250305 Jy ! Component: 2350 - total flux cleaned = 0.00250247 Jy ! Component: 2400 - total flux cleaned = 0.00244366 Jy ! Component: 2450 - total flux cleaned = 0.00241424 Jy ! Component: 2500 - total flux cleaned = 0.0022991 Jy ! Component: 2550 - total flux cleaned = 0.00229919 Jy ! Component: 2600 - total flux cleaned = 0.00235562 Jy ! Component: 2650 - total flux cleaned = 0.00235551 Jy ! Component: 2700 - total flux cleaned = 0.00246677 Jy ! Component: 2750 - total flux cleaned = 0.00254971 Jy ! Component: 2800 - total flux cleaned = 0.00268663 Jy ! Component: 2850 - total flux cleaned = 0.0028226 Jy ! Component: 2900 - total flux cleaned = 0.00290368 Jy ! Component: 2950 - total flux cleaned = 0.00298443 Jy ! Component: 3000 - total flux cleaned = 0.00306475 Jy ! Component: 3050 - total flux cleaned = 0.00322408 Jy ! Component: 3100 - total flux cleaned = 0.00327678 Jy ! Component: 3150 - total flux cleaned = 0.0033557 Jy ! Component: 3200 - total flux cleaned = 0.00348651 Jy ! Component: 3250 - total flux cleaned = 0.00356465 Jy ! Component: 3300 - total flux cleaned = 0.00364245 Jy ! Component: 3350 - total flux cleaned = 0.00377176 Jy ! Component: 3400 - total flux cleaned = 0.00384899 Jy ! Component: 3450 - total flux cleaned = 0.00395151 Jy ! Component: 3500 - total flux cleaned = 0.00405346 Jy ! Component: 3550 - total flux cleaned = 0.00410436 Jy ! Component: 3600 - total flux cleaned = 0.00420558 Jy ! Component: 3650 - total flux cleaned = 0.00430659 Jy ! Component: 3700 - total flux cleaned = 0.0043569 Jy ! Component: 3750 - total flux cleaned = 0.00453229 Jy ! Component: 3800 - total flux cleaned = 0.00465706 Jy ! Component: 3850 - total flux cleaned = 0.0047565 Jy ! Component: 3900 - total flux cleaned = 0.00488064 Jy ! Component: 3950 - total flux cleaned = 0.0049797 Jy ! Component: 4000 - total flux cleaned = 0.00512757 Jy ! Component: 4050 - total flux cleaned = 0.00522585 Jy ! Total flux subtracted in 4096 components = 0.00534831 Jy ! Clean residual min=-0.001296 max=0.001514 Jy/beam ! Clean residual mean=0.000037 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.23022 Jy keep ! Adding 225 model components to the UV plane model. ! The established model now contains 450 components and 0.23022 Jy ![Exited script file: muppet] wmap "J0719-3928_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.07 x 25.04 at 27.14 degrees (North through East) ! Clean map min=-0.0045124 max=0.093531 Jy/beam ! Writing clean map to FITS file: J0719-3928_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0935313 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00048955 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.57022 1.57022 3.14045 6.2809 12.5618 25.1236 50.2472 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.093 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.07 x 25.04 at 27.14 degrees (North through East) ! Clean map min=-0.0045124 max=0.093531 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0719-3928_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:08:03 2019