! Started logfile: J0719-1955_S_2017_07_09_pus_uvs.log on Wed May 8 14:44:17 2019 obs J0719-1955_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0719-1955_S_2017_07_09_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.777778 visibilities/baseline/integration-bin. ! Found source: J0719-1955 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 13440 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0719-1955_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 593 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.994155Jy sigma=0.007699 ! Fit after self-cal, rms=0.950402Jy sigma=0.007367 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.422 mas, bmaj=6.731 mas, bpa=-8.08 degrees ! Estimated noise=1321.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0405045 Jy ! Component: 100 - total flux cleaned = 0.0497385 Jy ! Total flux subtracted in 100 components = 0.0497385 Jy ! Clean residual min=-0.003725 max=0.004641 Jy/beam ! Clean residual mean=-0.000013 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.0497385 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0497385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088006Jy sigma=0.000657 ! Fit after self-cal, rms=0.086755Jy sigma=0.000647 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.057 mas, bmaj=8.252 mas, bpa=-5.395 degrees ! Estimated noise=911.221 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00570337 Jy ! Component: 100 - total flux cleaned = 0.00797931 Jy ! Component: 150 - total flux cleaned = 0.00904282 Jy ! Component: 200 - total flux cleaned = 0.00947565 Jy ! Total flux subtracted in 200 components = 0.00947565 Jy ! Clean residual min=-0.002534 max=0.002139 Jy/beam ! Clean residual mean=-0.000006 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.0592141 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 0.0592141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086408Jy sigma=0.000645 ! Fit after self-cal, rms=0.086388Jy sigma=0.000645 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.14 KP 0.96 ! LA 1.04 MK 1.07 NL 0.93 OV 1.05 ! PT 0.97 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.03 KP 0.97 ! LA 0.95 MK 1.11 NL 0.96 OV 1.05 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.99 KP 0.98 ! LA 1.06 MK 1.02 NL 0.94 OV 0.97 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.82 KP 1.00* ! LA 0.76 MK 0.89 NL 1.00* OV 1.00* ! PT 0.93 SC 1.00* ! ! ! Fit before self-cal, rms=0.086388Jy sigma=0.000645 ! Fit after self-cal, rms=0.087226Jy sigma=0.000644 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=8.263 mas, bpa=-5.129 degrees ! Estimated noise=917.102 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000248984 Jy ! Component: 100 - total flux cleaned = -0.000249498 Jy ! Component: 150 - total flux cleaned = -0.000227119 Jy ! Component: 200 - total flux cleaned = -0.000226374 Jy ! Total flux subtracted in 200 components = -0.000226374 Jy ! Clean residual min=-0.002620 max=0.002105 Jy/beam ! Clean residual mean=-0.000002 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.0589878 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 26 components and 0.0589878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087212Jy sigma=0.000644 ! Fit after self-cal, rms=0.087234Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087234Jy sigma=0.000644 ! Fit after self-cal, rms=0.086625Jy sigma=0.000643 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=8.167 mas, bpa=-5.227 degrees ! Estimated noise=912.982 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146852 Jy ! Component: 100 - total flux cleaned = -0.000167244 Jy ! Component: 150 - total flux cleaned = -0.000167961 Jy ! Component: 200 - total flux cleaned = -0.000167513 Jy ! Total flux subtracted in 200 components = -0.000167513 Jy ! Clean residual min=-0.002369 max=0.002173 Jy/beam ! Clean residual mean=-0.000001 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.0588203 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.0588203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086617Jy sigma=0.000643 ! Fit after self-cal, rms=0.086651Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.76129e-05 Jy ! Component: 100 - total flux cleaned = 2.85247e-05 Jy ! Component: 150 - total flux cleaned = 2.92893e-05 Jy ! Component: 200 - total flux cleaned = 4.34307e-05 Jy ! Total flux subtracted in 200 components = 4.34307e-05 Jy ! Clean residual min=-0.002343 max=0.002043 Jy/beam ! Clean residual mean=-0.000002 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.0588637 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.0588637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086644Jy sigma=0.000643 ! Fit after self-cal, rms=0.086642Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086642Jy sigma=0.000643 ! Fit after self-cal, rms=0.086835Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=8.149 mas, bpa=-5.279 degrees ! Estimated noise=912.725 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104558 Jy ! Component: 100 - total flux cleaned = -0.000102875 Jy ! Component: 150 - total flux cleaned = -0.000102025 Jy ! Component: 200 - total flux cleaned = -0.000100924 Jy ! Total flux subtracted in 200 components = -0.000100924 Jy ! Clean residual min=-0.002340 max=0.002108 Jy/beam ! Clean residual mean=-0.000002 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.0587628 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 34 components and 0.0587628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086828Jy sigma=0.000643 ! Fit after self-cal, rms=0.086844Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.37886e-05 Jy ! Component: 100 - total flux cleaned = -2.36688e-05 Jy ! Component: 150 - total flux cleaned = -2.36395e-05 Jy ! Component: 200 - total flux cleaned = -3.51315e-05 Jy ! Total flux subtracted in 200 components = -3.51315e-05 Jy ! Clean residual min=-0.002328 max=0.002056 Jy/beam ! Clean residual mean=-0.000002 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.0587276 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.0587276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086839Jy sigma=0.000643 ! Fit after self-cal, rms=0.086837Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086837Jy sigma=0.000643 ! Fit after self-cal, rms=0.086861Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.445 mas, bmaj=17.36 mas, bpa=-4.268 degrees ! Estimated noise=1163.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000101988 Jy ! Component: 100 - total flux cleaned = -9.98602e-05 Jy ! Component: 150 - total flux cleaned = -0.000110755 Jy ! Component: 200 - total flux cleaned = -0.000119478 Jy ! Total flux subtracted in 200 components = -0.000119478 Jy ! Clean residual min=-0.002734 max=0.002337 Jy/beam ! Clean residual mean=-0.000005 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.0586082 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 37 components and 0.0586082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086864Jy sigma=0.000643 ! Fit after self-cal, rms=0.086860Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.41186e-05 Jy ! Component: 100 - total flux cleaned = -7.7372e-05 Jy ! Component: 150 - total flux cleaned = -8.80651e-05 Jy ! Component: 200 - total flux cleaned = -8.87251e-05 Jy ! Total flux subtracted in 200 components = -8.87251e-05 Jy ! Clean residual min=-0.002714 max=0.002333 Jy/beam ! Clean residual mean=-0.000006 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.0585194 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 40 components and 0.0585194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086863Jy sigma=0.000643 ! Fit after self-cal, rms=0.086861Jy sigma=0.000643 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=8.146 mas, bpa=-5.328 degrees ! Estimated noise=912.303 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.095 x 8.146 at -5.328 degrees (North through East) ! Clean map min=-0.0023158 max=0.054726 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.473 mas, bmaj=6.665 mas, bpa=-8.034 degrees ! Estimated noise=1320.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0415257 Jy ! Component: 100 - total flux cleaned = 0.0516098 Jy ! Component: 150 - total flux cleaned = 0.0564489 Jy ! Component: 200 - total flux cleaned = 0.0579166 Jy ! Total flux subtracted in 200 components = 0.0579166 Jy ! Clean residual min=-0.003609 max=0.003121 Jy/beam ! Clean residual mean=-0.000001 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.0579166 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0579166 Jy ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=8.146 mas, bpa=-5.328 degrees ! Estimated noise=912.303 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00065427 Jy ! Component: 100 - total flux cleaned = 0.000708721 Jy ! Component: 150 - total flux cleaned = 0.000670706 Jy ! Component: 200 - total flux cleaned = 0.000670313 Jy ! Total flux subtracted in 200 components = 0.000670313 Jy ! Clean residual min=-0.002439 max=0.001995 Jy/beam ! Clean residual mean=-0.000002 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.0585869 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.0585869 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.445 mas, bmaj=17.36 mas, bpa=-4.268 degrees ! Estimated noise=1163.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175555 Jy ! Component: 100 - total flux cleaned = 0.000156054 Jy ! Component: 150 - total flux cleaned = 0.000139995 Jy ! Component: 200 - total flux cleaned = 0.000114677 Jy ! Total flux subtracted in 200 components = 0.000114677 Jy ! Clean residual min=-0.002700 max=0.002337 Jy/beam ! Clean residual mean=-0.000005 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.0587016 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.20667e-05 Jy ! Component: 100 - total flux cleaned = -3.23522e-05 Jy ! Component: 150 - total flux cleaned = -5.09629e-05 Jy ! Component: 200 - total flux cleaned = -6.82344e-05 Jy ! Total flux subtracted in 200 components = -6.82344e-05 Jy ! Clean residual min=-0.002705 max=0.002336 Jy/beam ! Clean residual mean=-0.000005 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.0586334 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.0586334 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=8.146 mas, bpa=-5.328 degrees ! Estimated noise=912.303 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000177397 Jy ! Component: 100 - total flux cleaned = 6.85489e-05 Jy ! Component: 150 - total flux cleaned = 2.49472e-05 Jy ! Component: 200 - total flux cleaned = -1.19517e-05 Jy ! Total flux subtracted in 200 components = -1.19517e-05 Jy ! Clean residual min=-0.002271 max=0.001969 Jy/beam ! Clean residual mean=-0.000002 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.0586214 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 33 components and 0.0586214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086866Jy sigma=0.000643 ! Fit after self-cal, rms=0.086866Jy sigma=0.000643 wmodel J0719-1955_S_2017_07_09_pus_map.mod ! Writing 33 model components to file: J0719-1955_S_2017_07_09_pus_map.mod wobs J0719-1955_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0719-1955_S_2017_07_09_pus_uvs.fits wwins J0719-1955_S_2017_07_09_pus_map.win ! wwins: Wrote 1 windows to J0719-1955_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00091643 Jy ! Component: 100 - total flux cleaned = -0.00113536 Jy ! Component: 150 - total flux cleaned = -0.00137523 Jy ! Component: 200 - total flux cleaned = -0.00157209 Jy ! Component: 250 - total flux cleaned = -0.00179372 Jy ! Component: 300 - total flux cleaned = -0.00191549 Jy ! Component: 350 - total flux cleaned = -0.00197534 Jy ! Component: 400 - total flux cleaned = -0.00214884 Jy ! Component: 450 - total flux cleaned = -0.00212082 Jy ! Component: 500 - total flux cleaned = -0.00217598 Jy ! Component: 550 - total flux cleaned = -0.00214924 Jy ! Component: 600 - total flux cleaned = -0.0021762 Jy ! Component: 650 - total flux cleaned = -0.00220167 Jy ! Component: 700 - total flux cleaned = -0.00210164 Jy ! Component: 750 - total flux cleaned = -0.00205325 Jy ! Component: 800 - total flux cleaned = -0.00200534 Jy ! Component: 850 - total flux cleaned = -0.00193441 Jy ! Component: 900 - total flux cleaned = -0.00184194 Jy ! Component: 950 - total flux cleaned = -0.00184219 Jy ! Component: 1000 - total flux cleaned = -0.00177494 Jy ! Component: 1050 - total flux cleaned = -0.00170876 Jy ! Component: 1100 - total flux cleaned = -0.00164355 Jy ! Component: 1150 - total flux cleaned = -0.00160111 Jy ! Component: 1200 - total flux cleaned = -0.00160075 Jy ! Component: 1250 - total flux cleaned = -0.00147726 Jy ! Component: 1300 - total flux cleaned = -0.00137595 Jy ! Component: 1350 - total flux cleaned = -0.00127653 Jy ! Component: 1400 - total flux cleaned = -0.00127674 Jy ! Component: 1450 - total flux cleaned = -0.00117933 Jy ! Component: 1500 - total flux cleaned = -0.00114125 Jy ! Component: 1550 - total flux cleaned = -0.00102798 Jy ! Component: 1600 - total flux cleaned = -0.0010093 Jy ! Component: 1650 - total flux cleaned = -0.000881063 Jy ! Component: 1700 - total flux cleaned = -0.000772694 Jy ! Component: 1750 - total flux cleaned = -0.000683583 Jy ! Component: 1800 - total flux cleaned = -0.000595538 Jy ! Component: 1850 - total flux cleaned = -0.000560858 Jy ! Component: 1900 - total flux cleaned = -0.000457695 Jy ! Component: 1950 - total flux cleaned = -0.00040722 Jy ! Component: 2000 - total flux cleaned = -0.000323261 Jy ! Component: 2050 - total flux cleaned = -0.000256887 Jy ! Component: 2100 - total flux cleaned = -0.000207256 Jy ! Component: 2150 - total flux cleaned = -0.000142545 Jy ! Component: 2200 - total flux cleaned = -3.10316e-05 Jy ! Component: 2250 - total flux cleaned = -3.1236e-05 Jy ! Component: 2300 - total flux cleaned = 3.11987e-05 Jy ! Component: 2350 - total flux cleaned = 7.74746e-05 Jy ! Component: 2400 - total flux cleaned = 0.000169188 Jy ! Component: 2450 - total flux cleaned = 0.000259356 Jy ! Component: 2500 - total flux cleaned = 0.000289027 Jy ! Component: 2550 - total flux cleaned = 0.000347844 Jy ! Component: 2600 - total flux cleaned = 0.000362349 Jy ! Component: 2650 - total flux cleaned = 0.000448868 Jy ! Component: 2700 - total flux cleaned = 0.000505971 Jy ! Component: 2750 - total flux cleaned = 0.000590723 Jy ! Component: 2800 - total flux cleaned = 0.000632499 Jy ! Component: 2850 - total flux cleaned = 0.000715311 Jy ! Component: 2900 - total flux cleaned = 0.000756316 Jy ! Component: 2950 - total flux cleaned = 0.000783534 Jy ! Component: 3000 - total flux cleaned = 0.000850701 Jy ! Component: 3050 - total flux cleaned = 0.000917336 Jy ! Component: 3100 - total flux cleaned = 0.000996468 Jy ! Component: 3150 - total flux cleaned = 0.0010487 Jy ! Component: 3200 - total flux cleaned = 0.00110071 Jy ! Component: 3250 - total flux cleaned = 0.00115202 Jy ! Component: 3300 - total flux cleaned = 0.0012156 Jy ! Component: 3350 - total flux cleaned = 0.00125349 Jy ! Component: 3400 - total flux cleaned = 0.0012784 Jy ! Component: 3450 - total flux cleaned = 0.00135277 Jy ! Component: 3500 - total flux cleaned = 0.00138968 Jy ! Component: 3550 - total flux cleaned = 0.00140199 Jy ! Component: 3600 - total flux cleaned = 0.00146231 Jy ! Component: 3650 - total flux cleaned = 0.00146224 Jy ! Component: 3700 - total flux cleaned = 0.00147415 Jy ! Component: 3750 - total flux cleaned = 0.00148603 Jy ! Component: 3800 - total flux cleaned = 0.0015214 Jy ! Component: 3850 - total flux cleaned = 0.00155642 Jy ! Component: 3900 - total flux cleaned = 0.00160279 Jy ! Component: 3950 - total flux cleaned = 0.00157973 Jy ! Component: 4000 - total flux cleaned = 0.001614 Jy ! Component: 4050 - total flux cleaned = 0.00161413 Jy ! Total flux subtracted in 4096 components = 0.00162548 Jy ! Clean residual min=-0.000630 max=0.000702 Jy/beam ! Clean residual mean=-0.000006 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.0602469 Jy keep ! Adding 312 model components to the UV plane model. ! The established model now contains 345 components and 0.0602469 Jy ![Exited script file: muppet] wmap "J0719-1955_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.095 x 8.146 at -5.328 degrees (North through East) ! Clean map min=-0.0015949 max=0.054382 Jy/beam ! Writing clean map to FITS file: J0719-1955_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0543818 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000200256 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.10472 1.10472 2.20945 4.41889 8.83779 17.6756 35.3511 70.7023 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.054 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.095 x 8.146 at -5.328 degrees (North through East) ! Clean map min=-0.0015949 max=0.054382 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0719-1955_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:44:22 2019