! Started logfile: J0718-1813_S_2017_07_09_pus_uvs.log on Wed May 8 14:44:12 2019 obs J0718-1813_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0718-1813_S_2017_07_09_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.777778 visibilities/baseline/integration-bin. ! Found source: J0718-1813 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 10640 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0718-1813_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 444 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.761623Jy sigma=0.006093 ! Fit after self-cal, rms=0.732614Jy sigma=0.005859 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.457 mas, bmaj=6.9 mas, bpa=-8.387 degrees ! Estimated noise=1461.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.198007 Jy ! Component: 100 - total flux cleaned = 0.281826 Jy ! Total flux subtracted in 100 components = 0.281826 Jy ! Clean residual min=-0.013963 max=0.038653 Jy/beam ! Clean residual mean=-0.000161 rms=0.004620 Jy/beam ! Combined flux in latest and established models = 0.281826 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.281826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121240Jy sigma=0.000939 ! Fit after self-cal, rms=0.120577Jy sigma=0.000934 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0440411 Jy ! Component: 100 - total flux cleaned = 0.0677771 Jy ! Total flux subtracted in 100 components = 0.0677771 Jy ! Clean residual min=-0.008635 max=0.014569 Jy/beam ! Clean residual mean=-0.000075 rms=0.002350 Jy/beam ! Combined flux in latest and established models = 0.349603 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 20 components and 0.349603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097458Jy sigma=0.000743 ! Fit after self-cal, rms=0.097243Jy sigma=0.000741 ! Inverting map ! Added new window around map position (3.5, -9.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164873 Jy ! Component: 100 - total flux cleaned = 0.0263556 Jy ! Total flux subtracted in 100 components = 0.0263556 Jy ! Clean residual min=-0.006917 max=0.012479 Jy/beam ! Clean residual mean=-0.000043 rms=0.001797 Jy/beam ! Combined flux in latest and established models = 0.375958 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 35 components and 0.375958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093238Jy sigma=0.000707 ! Fit after self-cal, rms=0.093107Jy sigma=0.000706 ! Inverting map ! Added new window around map position (-5.5, -25). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112024 Jy ! Component: 100 - total flux cleaned = 0.0180701 Jy ! Total flux subtracted in 100 components = 0.0180701 Jy ! Clean residual min=-0.006155 max=0.006645 Jy/beam ! Clean residual mean=-0.000027 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 0.394028 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 0.394028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091372Jy sigma=0.000692 ! Fit after self-cal, rms=0.091245Jy sigma=0.000691 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.995 mas, bmaj=7.943 mas, bpa=-7.948 degrees ! Estimated noise=977.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00878467 Jy ! Component: 100 - total flux cleaned = 0.0140461 Jy ! Component: 150 - total flux cleaned = 0.0165115 Jy ! Component: 200 - total flux cleaned = 0.0173792 Jy ! Total flux subtracted in 200 components = 0.0173792 Jy ! Clean residual min=-0.004319 max=0.004554 Jy/beam ! Clean residual mean=-0.000015 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.411408 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 68 components and 0.411408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090213Jy sigma=0.000684 ! Fit after self-cal, rms=0.090172Jy sigma=0.000684 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 0.99 KP 1.03 ! LA 1.03 MK 1.06 NL 0.88 OV 1.01 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.05 KP 0.99 ! LA 0.98 MK 0.97 NL 1.02 OV 1.05 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.04 KP 1.00 ! LA 0.99 MK 1.00 NL 0.98 OV 0.96 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.02 KP 1.00* ! LA 0.92 MK 0.79 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.090172Jy sigma=0.000684 ! Fit after self-cal, rms=0.087994Jy sigma=0.000672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.993 mas, bmaj=7.946 mas, bpa=-7.974 degrees ! Estimated noise=975.955 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152258 Jy ! Component: 100 - total flux cleaned = 0.00152762 Jy ! Component: 150 - total flux cleaned = 0.00137556 Jy ! Component: 200 - total flux cleaned = 0.00124228 Jy ! Total flux subtracted in 200 components = 0.00124228 Jy ! Clean residual min=-0.003599 max=0.003699 Jy/beam ! Clean residual mean=-0.000008 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.41265 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 93 components and 0.41265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087823Jy sigma=0.000671 ! Fit after self-cal, rms=0.087797Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087797Jy sigma=0.000671 ! Fit after self-cal, rms=0.087766Jy sigma=0.000669 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.99 mas, bmaj=8.006 mas, bpa=-7.8 degrees ! Estimated noise=976.206 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000359845 Jy ! Component: 100 - total flux cleaned = 0.00050146 Jy ! Component: 150 - total flux cleaned = 0.00049935 Jy ! Component: 200 - total flux cleaned = 0.000552635 Jy ! Total flux subtracted in 200 components = 0.000552635 Jy ! Clean residual min=-0.003093 max=0.003326 Jy/beam ! Clean residual mean=-0.000005 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.413202 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 107 components and 0.413202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087673Jy sigma=0.000668 ! Fit after self-cal, rms=0.087674Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 25.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148987 Jy ! Component: 100 - total flux cleaned = 0.00218044 Jy ! Component: 150 - total flux cleaned = 0.00306292 Jy ! Component: 200 - total flux cleaned = 0.00348348 Jy ! Total flux subtracted in 200 components = 0.00348348 Jy ! Clean residual min=-0.002610 max=0.002340 Jy/beam ! Clean residual mean=-0.000001 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.416686 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 120 components and 0.416686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087520Jy sigma=0.000667 ! Fit after self-cal, rms=0.087514Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087514Jy sigma=0.000667 ! Fit after self-cal, rms=0.087461Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.989 mas, bmaj=8.015 mas, bpa=-7.815 degrees ! Estimated noise=975.203 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165447 Jy ! Component: 100 - total flux cleaned = 0.000548204 Jy ! Component: 150 - total flux cleaned = 0.000795245 Jy ! Component: 200 - total flux cleaned = 0.000933917 Jy ! Total flux subtracted in 200 components = 0.000933917 Jy ! Clean residual min=-0.002293 max=0.002213 Jy/beam ! Clean residual mean=-0.000000 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.41762 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 133 components and 0.41762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087407Jy sigma=0.000666 ! Fit after self-cal, rms=0.087405Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.93787e-05 Jy ! Component: 100 - total flux cleaned = 0.000208358 Jy ! Component: 150 - total flux cleaned = 0.00032977 Jy ! Component: 200 - total flux cleaned = 0.000406896 Jy ! Total flux subtracted in 200 components = 0.000406896 Jy ! Clean residual min=-0.002207 max=0.002079 Jy/beam ! Clean residual mean=0.000000 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.418027 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 140 components and 0.418027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087371Jy sigma=0.000666 ! Fit after self-cal, rms=0.087370Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087370Jy sigma=0.000666 ! Fit after self-cal, rms=0.087371Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.352 mas, bmaj=16.77 mas, bpa=-6.417 degrees ! Estimated noise=1286.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158917 Jy ! Component: 100 - total flux cleaned = 0.000415163 Jy ! Component: 150 - total flux cleaned = 0.000512191 Jy ! Component: 200 - total flux cleaned = 0.00057859 Jy ! Total flux subtracted in 200 components = 0.00057859 Jy ! Clean residual min=-0.002133 max=0.002048 Jy/beam ! Clean residual mean=0.000004 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.418605 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 151 components and 0.418605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087368Jy sigma=0.000666 ! Fit after self-cal, rms=0.087368Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00012627 Jy ! Component: 100 - total flux cleaned = 0.000186452 Jy ! Component: 150 - total flux cleaned = 0.000223731 Jy ! Component: 200 - total flux cleaned = 0.000240922 Jy ! Total flux subtracted in 200 components = 0.000240922 Jy ! Clean residual min=-0.002056 max=0.002025 Jy/beam ! Clean residual mean=0.000004 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.418846 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 159 components and 0.418846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087368Jy sigma=0.000666 ! Fit after self-cal, rms=0.087368Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.988 mas, bmaj=8.021 mas, bpa=-7.826 degrees ! Estimated noise=975.01 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.988 x 8.021 at -7.826 degrees (North through East) ! Clean map min=-0.0037452 max=0.24906 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.455 mas, bmaj=6.976 mas, bpa=-8.25 degrees ! Estimated noise=1460.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.198948 Jy ! Component: 100 - total flux cleaned = 0.283564 Jy ! Component: 150 - total flux cleaned = 0.325256 Jy ! Component: 200 - total flux cleaned = 0.348701 Jy ! Total flux subtracted in 200 components = 0.348701 Jy ! Clean residual min=-0.006770 max=0.012501 Jy/beam ! Clean residual mean=-0.000074 rms=0.002071 Jy/beam ! Combined flux in latest and established models = 0.348701 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.348701 Jy ! Inverting map and beam ! Estimated beam: bmin=2.988 mas, bmaj=8.021 mas, bpa=-7.826 degrees ! Estimated noise=975.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230121 Jy ! Component: 100 - total flux cleaned = 0.0372408 Jy ! Component: 150 - total flux cleaned = 0.0467228 Jy ! Component: 200 - total flux cleaned = 0.0531573 Jy ! Total flux subtracted in 200 components = 0.0531573 Jy ! Clean residual min=-0.003872 max=0.005008 Jy/beam ! Clean residual mean=-0.000029 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.401859 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 60 components and 0.401859 Jy ! Inverting map ! Added new window around map position (4, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00450063 Jy ! Component: 100 - total flux cleaned = 0.00688931 Jy ! Component: 150 - total flux cleaned = 0.00887693 Jy ! Component: 200 - total flux cleaned = 0.0103769 Jy ! Total flux subtracted in 200 components = 0.0103769 Jy ! Clean residual min=-0.002844 max=0.002633 Jy/beam ! Clean residual mean=-0.000009 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.412236 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 96 components and 0.412236 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.352 mas, bmaj=16.77 mas, bpa=-6.417 degrees ! Estimated noise=1286.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280856 Jy ! Component: 100 - total flux cleaned = 0.00444093 Jy ! Component: 150 - total flux cleaned = 0.00521956 Jy ! Component: 200 - total flux cleaned = 0.00567899 Jy ! Total flux subtracted in 200 components = 0.00567899 Jy ! Clean residual min=-0.002191 max=0.002340 Jy/beam ! Clean residual mean=0.000002 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.417915 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000230372 Jy ! Component: 100 - total flux cleaned = 0.000399721 Jy ! Component: 150 - total flux cleaned = 0.000480195 Jy ! Component: 200 - total flux cleaned = 0.000591712 Jy ! Total flux subtracted in 200 components = 0.000591712 Jy ! Clean residual min=-0.002054 max=0.002205 Jy/beam ! Clean residual mean=0.000003 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.418507 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 139 components and 0.418507 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.988 mas, bmaj=8.021 mas, bpa=-7.826 degrees ! Estimated noise=975.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000591281 Jy ! Component: 100 - total flux cleaned = -0.000520298 Jy ! Component: 150 - total flux cleaned = -0.000264592 Jy ! Component: 200 - total flux cleaned = -3.48716e-05 Jy ! Total flux subtracted in 200 components = -3.48716e-05 Jy ! Clean residual min=-0.002296 max=0.002206 Jy/beam ! Clean residual mean=-0.000000 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.418472 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 157 components and 0.418472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087408Jy sigma=0.000666 ! Fit after self-cal, rms=0.087399Jy sigma=0.000666 wmodel J0718-1813_S_2017_07_09_pus_map.mod ! Writing 157 model components to file: J0718-1813_S_2017_07_09_pus_map.mod wobs J0718-1813_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0718-1813_S_2017_07_09_pus_uvs.fits wwins J0718-1813_S_2017_07_09_pus_map.win ! wwins: Wrote 6 windows to J0718-1813_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000346069 Jy ! Component: 100 - total flux cleaned = -0.000346887 Jy ! Component: 150 - total flux cleaned = -0.000488699 Jy ! Component: 200 - total flux cleaned = -0.000590427 Jy ! Component: 250 - total flux cleaned = -0.000491809 Jy ! Component: 300 - total flux cleaned = -0.000621013 Jy ! Component: 350 - total flux cleaned = -0.00071512 Jy ! Component: 400 - total flux cleaned = -0.000866327 Jy ! Component: 450 - total flux cleaned = -0.00104299 Jy ! Component: 500 - total flux cleaned = -0.00121501 Jy ! Component: 550 - total flux cleaned = -0.00146733 Jy ! Component: 600 - total flux cleaned = -0.00163149 Jy ! Component: 650 - total flux cleaned = -0.00173939 Jy ! Component: 700 - total flux cleaned = -0.0019234 Jy ! Component: 750 - total flux cleaned = -0.00202586 Jy ! Component: 800 - total flux cleaned = -0.002127 Jy ! Component: 850 - total flux cleaned = -0.00217687 Jy ! Component: 900 - total flux cleaned = -0.00232445 Jy ! Component: 950 - total flux cleaned = -0.00242068 Jy ! Component: 1000 - total flux cleaned = -0.00242092 Jy ! Component: 1050 - total flux cleaned = -0.00251482 Jy ! Component: 1100 - total flux cleaned = -0.0025613 Jy ! Component: 1150 - total flux cleaned = -0.00265255 Jy ! Component: 1200 - total flux cleaned = -0.00267521 Jy ! Component: 1250 - total flux cleaned = -0.00276403 Jy ! Component: 1300 - total flux cleaned = -0.00278597 Jy ! Component: 1350 - total flux cleaned = -0.00285104 Jy ! Component: 1400 - total flux cleaned = -0.00291514 Jy ! Component: 1450 - total flux cleaned = -0.0029785 Jy ! Component: 1500 - total flux cleaned = -0.00297832 Jy ! Component: 1550 - total flux cleaned = -0.00306015 Jy ! Component: 1600 - total flux cleaned = -0.00306024 Jy ! Component: 1650 - total flux cleaned = -0.00314045 Jy ! Component: 1700 - total flux cleaned = -0.00308077 Jy ! Component: 1750 - total flux cleaned = -0.00319839 Jy ! Component: 1800 - total flux cleaned = -0.00321776 Jy ! Component: 1850 - total flux cleaned = -0.00325622 Jy ! Component: 1900 - total flux cleaned = -0.00327495 Jy ! Component: 1950 - total flux cleaned = -0.00329407 Jy ! Component: 2000 - total flux cleaned = -0.00325716 Jy ! Component: 2050 - total flux cleaned = -0.00333045 Jy ! Component: 2100 - total flux cleaned = -0.00333052 Jy ! Component: 2150 - total flux cleaned = -0.00333072 Jy ! Component: 2200 - total flux cleaned = -0.00345429 Jy ! Component: 2250 - total flux cleaned = -0.00338419 Jy ! Component: 2300 - total flux cleaned = -0.00347048 Jy ! Component: 2350 - total flux cleaned = -0.00345329 Jy ! Component: 2400 - total flux cleaned = -0.00347044 Jy ! Component: 2450 - total flux cleaned = -0.00343695 Jy ! Component: 2500 - total flux cleaned = -0.00351993 Jy ! Component: 2550 - total flux cleaned = -0.00355263 Jy ! Component: 2600 - total flux cleaned = -0.00356878 Jy ! Component: 2650 - total flux cleaned = -0.00360092 Jy ! Component: 2700 - total flux cleaned = -0.00369644 Jy ! Component: 2750 - total flux cleaned = -0.00366488 Jy ! Component: 2800 - total flux cleaned = -0.00369649 Jy ! Component: 2850 - total flux cleaned = -0.00377386 Jy ! Component: 2900 - total flux cleaned = -0.00378907 Jy ! Component: 2950 - total flux cleaned = -0.00386498 Jy ! Component: 3000 - total flux cleaned = -0.00393984 Jy ! Component: 3050 - total flux cleaned = -0.0039843 Jy ! Component: 3100 - total flux cleaned = -0.00401359 Jy ! Component: 3150 - total flux cleaned = -0.0040573 Jy ! Component: 3200 - total flux cleaned = -0.00408626 Jy ! Component: 3250 - total flux cleaned = -0.00412934 Jy ! Component: 3300 - total flux cleaned = -0.00415772 Jy ! Component: 3350 - total flux cleaned = -0.00415781 Jy ! Component: 3400 - total flux cleaned = -0.00424181 Jy ! Component: 3450 - total flux cleaned = -0.00420011 Jy ! Component: 3500 - total flux cleaned = -0.00428285 Jy ! Component: 3550 - total flux cleaned = -0.00431009 Jy ! Component: 3600 - total flux cleaned = -0.00439124 Jy ! Component: 3650 - total flux cleaned = -0.00437768 Jy ! Component: 3700 - total flux cleaned = -0.0044045 Jy ! Component: 3750 - total flux cleaned = -0.00445739 Jy ! Component: 3800 - total flux cleaned = -0.00449668 Jy ! Component: 3850 - total flux cleaned = -0.00450963 Jy ! Component: 3900 - total flux cleaned = -0.00458744 Jy ! Component: 3950 - total flux cleaned = -0.00460024 Jy ! Component: 4000 - total flux cleaned = -0.00465135 Jy ! Component: 4050 - total flux cleaned = -0.00463875 Jy ! Total flux subtracted in 4096 components = -0.00468915 Jy ! Clean residual min=-0.001079 max=0.000776 Jy/beam ! Clean residual mean=0.000000 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.413783 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 434 components and 0.413782 Jy ![Exited script file: muppet] wmap "J0718-1813_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.988 x 8.021 at -7.826 degrees (North through East) ! Clean map min=-0.0041081 max=0.24891 Jy/beam ! Writing clean map to FITS file: J0718-1813_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.248911 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00022459 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.270687 0.270687 0.541375 1.08275 2.1655 4.331 8.66199 17.324 34.648 69.2959 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.248 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.988 x 8.021 at -7.826 degrees (North through East) ! Clean map min=-0.0041081 max=0.24891 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0718-1813_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:44:17 2019