! Started logfile: J0717+1001_S_2017_10_09_pus_uvs.log on Sun May 12 13:06:54 2019 obs J0717+1001_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0717+1001_S_2017_10_09_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.603691 visibilities/baseline/integration-bin. ! Found source: J0717+1001 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 12692 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0717+1001_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 299 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 498 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 416 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 958 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.985846Jy sigma=0.009236 ! Fit after self-cal, rms=0.956393Jy sigma=0.008967 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=11.41 mas, bpa=-19.69 degrees ! Estimated noise=1344.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0344659 Jy ! Component: 100 - total flux cleaned = 0.0421019 Jy ! Total flux subtracted in 100 components = 0.0421019 Jy ! Clean residual min=-0.003829 max=0.004002 Jy/beam ! Clean residual mean=-0.000005 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.0421019 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0421019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071464Jy sigma=0.000618 ! Fit after self-cal, rms=0.070515Jy sigma=0.000609 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.457 mas, bmaj=12.73 mas, bpa=-19.55 degrees ! Estimated noise=843.842 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00425755 Jy ! Component: 100 - total flux cleaned = 0.00575427 Jy ! Component: 150 - total flux cleaned = 0.00626697 Jy ! Component: 200 - total flux cleaned = 0.00646106 Jy ! Total flux subtracted in 200 components = 0.00646106 Jy ! Clean residual min=-0.002573 max=0.002446 Jy/beam ! Clean residual mean=-0.000006 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.0485629 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 32 components and 0.0485629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070225Jy sigma=0.000608 ! Fit after self-cal, rms=0.070192Jy sigma=0.000608 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.04 HN 0.98 KP 1.09 ! LA 0.99 MK 1.06 NL 0.98 OV 1.00* ! PT 1.12 ! ! ! Correcting IF 2. ! A total of 84 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.97 HN 1.02 KP 0.99 ! LA 1.00 MK 1.00 NL 1.17 OV 1.00* ! PT 1.06 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.96 HN 0.92 KP 0.92 ! LA 0.83 MK 1.14 NL 1.03 OV 1.00* ! PT 1.08 ! ! ! Correcting IF 4. ! A total of 132 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 0.87 KP 1.00* ! LA 0.68 MK 0.91 NL 1.00* OV 1.00* ! PT 0.98 ! ! ! Fit before self-cal, rms=0.070192Jy sigma=0.000608 ! Fit after self-cal, rms=0.068337Jy sigma=0.000608 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.489 mas, bmaj=12.58 mas, bpa=-19.18 degrees ! Estimated noise=859.637 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000633279 Jy ! Component: 100 - total flux cleaned = 0.000730205 Jy ! Component: 150 - total flux cleaned = 0.000781752 Jy ! Component: 200 - total flux cleaned = 0.000813328 Jy ! Total flux subtracted in 200 components = 0.000813328 Jy ! Clean residual min=-0.002036 max=0.001969 Jy/beam ! Clean residual mean=-0.000006 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.0493763 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 45 components and 0.0493762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068327Jy sigma=0.000607 ! Fit after self-cal, rms=0.068233Jy sigma=0.000607 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068233Jy sigma=0.000607 ! Fit after self-cal, rms=0.067997Jy sigma=0.000607 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.496 mas, bmaj=12.49 mas, bpa=-19.07 degrees ! Estimated noise=857.409 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000327701 Jy ! Component: 100 - total flux cleaned = 0.000367447 Jy ! Component: 150 - total flux cleaned = 0.000411179 Jy ! Component: 200 - total flux cleaned = 0.000439741 Jy ! Total flux subtracted in 200 components = 0.000439741 Jy ! Clean residual min=-0.002045 max=0.001886 Jy/beam ! Clean residual mean=-0.000000 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.049816 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 0.049816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067991Jy sigma=0.000606 ! Fit after self-cal, rms=0.067983Jy sigma=0.000606 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.17918e-05 Jy ! Component: 100 - total flux cleaned = -2.49858e-05 Jy ! Component: 150 - total flux cleaned = -4.26729e-06 Jy ! Component: 200 - total flux cleaned = 1.34121e-05 Jy ! Total flux subtracted in 200 components = 1.34121e-05 Jy ! Clean residual min=-0.002069 max=0.001795 Jy/beam ! Clean residual mean=-0.000001 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.0498294 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 59 components and 0.0498294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067979Jy sigma=0.000606 ! Fit after self-cal, rms=0.067978Jy sigma=0.000606 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067978Jy sigma=0.000606 ! Fit after self-cal, rms=0.067885Jy sigma=0.000606 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.493 mas, bmaj=12.45 mas, bpa=-19.03 degrees ! Estimated noise=854.765 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253293 Jy ! Component: 100 - total flux cleaned = 0.000275084 Jy ! Component: 150 - total flux cleaned = 0.00030425 Jy ! Component: 200 - total flux cleaned = 0.00032899 Jy ! Total flux subtracted in 200 components = 0.00032899 Jy ! Clean residual min=-0.001970 max=0.001871 Jy/beam ! Clean residual mean=-0.000000 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.0501584 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 61 components and 0.0501584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067881Jy sigma=0.000606 ! Fit after self-cal, rms=0.067892Jy sigma=0.000606 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.73332e-05 Jy ! Component: 100 - total flux cleaned = -2.87995e-05 Jy ! Component: 150 - total flux cleaned = -2.93681e-05 Jy ! Component: 200 - total flux cleaned = -1.47266e-05 Jy ! Total flux subtracted in 200 components = -1.47266e-05 Jy ! Clean residual min=-0.002004 max=0.001847 Jy/beam ! Clean residual mean=-0.000000 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0501437 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 62 components and 0.0501437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067889Jy sigma=0.000606 ! Fit after self-cal, rms=0.067892Jy sigma=0.000606 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067892Jy sigma=0.000606 ! Fit after self-cal, rms=0.067863Jy sigma=0.000606 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.143 mas, bmaj=13.11 mas, bpa=-19.86 degrees ! Estimated noise=1073.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000263637 Jy ! Component: 100 - total flux cleaned = 0.000279402 Jy ! Component: 150 - total flux cleaned = 0.000293116 Jy ! Component: 200 - total flux cleaned = 0.00030546 Jy ! Total flux subtracted in 200 components = 0.00030546 Jy ! Clean residual min=-0.001905 max=0.002124 Jy/beam ! Clean residual mean=0.000002 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.0504491 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 72 components and 0.0504491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067861Jy sigma=0.000606 ! Fit after self-cal, rms=0.067870Jy sigma=0.000605 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.68551e-05 Jy ! Component: 100 - total flux cleaned = -2.73562e-05 Jy ! Component: 150 - total flux cleaned = -2.81191e-05 Jy ! Component: 200 - total flux cleaned = -2.25981e-05 Jy ! Total flux subtracted in 200 components = -2.25981e-05 Jy ! Clean residual min=-0.001936 max=0.002115 Jy/beam ! Clean residual mean=0.000001 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.0504265 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 77 components and 0.0504265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067868Jy sigma=0.000605 ! Fit after self-cal, rms=0.067869Jy sigma=0.000605 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.488 mas, bmaj=12.43 mas, bpa=-18.99 degrees ! Estimated noise=852.922 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.488 x 12.43 at -18.99 degrees (North through East) ! Clean map min=-0.0018753 max=0.046252 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.879 mas, bmaj=11.22 mas, bpa=-19.01 degrees ! Estimated noise=1345.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0348455 Jy ! Component: 100 - total flux cleaned = 0.0427592 Jy ! Component: 150 - total flux cleaned = 0.0463358 Jy ! Component: 200 - total flux cleaned = 0.048396 Jy ! Total flux subtracted in 200 components = 0.048396 Jy ! Clean residual min=-0.003135 max=0.003322 Jy/beam ! Clean residual mean=-0.000002 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.048396 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.048396 Jy ! Inverting map and beam ! Estimated beam: bmin=3.488 mas, bmaj=12.43 mas, bpa=-18.99 degrees ! Estimated noise=852.922 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162644 Jy ! Component: 100 - total flux cleaned = 0.00195575 Jy ! Component: 150 - total flux cleaned = 0.0019894 Jy ! Component: 200 - total flux cleaned = 0.00196348 Jy ! Total flux subtracted in 200 components = 0.00196348 Jy ! Clean residual min=-0.001843 max=0.001875 Jy/beam ! Clean residual mean=0.000000 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0503595 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 35 components and 0.0503595 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.143 mas, bmaj=13.11 mas, bpa=-19.86 degrees ! Estimated noise=1073.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.00634e-05 Jy ! Component: 100 - total flux cleaned = 1.9743e-05 Jy ! Component: 150 - total flux cleaned = 1.94933e-05 Jy ! Component: 200 - total flux cleaned = 2.00957e-05 Jy ! Total flux subtracted in 200 components = 2.00957e-05 Jy ! Clean residual min=-0.001925 max=0.002146 Jy/beam ! Clean residual mean=0.000001 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.0503796 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.66775e-07 Jy ! Component: 100 - total flux cleaned = 1.36165e-06 Jy ! Component: 150 - total flux cleaned = 1.85195e-06 Jy ! Component: 200 - total flux cleaned = 7.73937e-06 Jy ! Total flux subtracted in 200 components = 7.73937e-06 Jy ! Clean residual min=-0.001931 max=0.002100 Jy/beam ! Clean residual mean=0.000002 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.0503873 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 55 components and 0.0503873 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.488 mas, bmaj=12.43 mas, bpa=-18.99 degrees ! Estimated noise=852.922 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000211938 Jy ! Component: 100 - total flux cleaned = -0.00019564 Jy ! Component: 150 - total flux cleaned = -0.000210673 Jy ! Component: 200 - total flux cleaned = -0.000210819 Jy ! Total flux subtracted in 200 components = -0.000210819 Jy ! Clean residual min=-0.001878 max=0.001769 Jy/beam ! Clean residual mean=0.000000 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.0501765 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 65 components and 0.0501765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067876Jy sigma=0.000606 ! Fit after self-cal, rms=0.067874Jy sigma=0.000606 wmodel J0717+1001_S_2017_10_09_pus_map.mod ! Writing 65 model components to file: J0717+1001_S_2017_10_09_pus_map.mod wobs J0717+1001_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0717+1001_S_2017_10_09_pus_uvs.fits wwins J0717+1001_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0717+1001_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -8.05999e-05 Jy ! Component: 100 - total flux cleaned = 0.000217749 Jy ! Component: 150 - total flux cleaned = 0.000524646 Jy ! Component: 200 - total flux cleaned = 0.000812744 Jy ! Component: 250 - total flux cleaned = 0.00111154 Jy ! Component: 300 - total flux cleaned = 0.00139619 Jy ! Component: 350 - total flux cleaned = 0.00157828 Jy ! Component: 400 - total flux cleaned = 0.00177424 Jy ! Component: 450 - total flux cleaned = 0.00192052 Jy ! Component: 500 - total flux cleaned = 0.00204116 Jy ! Component: 550 - total flux cleaned = 0.00217728 Jy ! Component: 600 - total flux cleaned = 0.00229013 Jy ! Component: 650 - total flux cleaned = 0.00240013 Jy ! Component: 700 - total flux cleaned = 0.00254205 Jy ! Component: 750 - total flux cleaned = 0.00264522 Jy ! Component: 800 - total flux cleaned = 0.00277904 Jy ! Component: 850 - total flux cleaned = 0.00284467 Jy ! Component: 900 - total flux cleaned = 0.00298856 Jy ! Component: 950 - total flux cleaned = 0.00306626 Jy ! Component: 1000 - total flux cleaned = 0.00314234 Jy ! Component: 1050 - total flux cleaned = 0.00320183 Jy ! Component: 1100 - total flux cleaned = 0.00327466 Jy ! Component: 1150 - total flux cleaned = 0.00334579 Jy ! Component: 1200 - total flux cleaned = 0.00335976 Jy ! Component: 1250 - total flux cleaned = 0.00338732 Jy ! Component: 1300 - total flux cleaned = 0.00345463 Jy ! Component: 1350 - total flux cleaned = 0.00345464 Jy ! Component: 1400 - total flux cleaned = 0.00354566 Jy ! Component: 1450 - total flux cleaned = 0.003584 Jy ! Component: 1500 - total flux cleaned = 0.00364729 Jy ! Component: 1550 - total flux cleaned = 0.00370942 Jy ! Component: 1600 - total flux cleaned = 0.00375841 Jy ! Component: 1650 - total flux cleaned = 0.00381872 Jy ! Component: 1700 - total flux cleaned = 0.00385431 Jy ! Component: 1750 - total flux cleaned = 0.00392453 Jy ! Component: 1800 - total flux cleaned = 0.00397051 Jy ! Component: 1850 - total flux cleaned = 0.00402726 Jy ! Component: 1900 - total flux cleaned = 0.00408334 Jy ! Component: 1950 - total flux cleaned = 0.00411663 Jy ! Component: 2000 - total flux cleaned = 0.00418243 Jy ! Component: 2050 - total flux cleaned = 0.00423662 Jy ! Component: 2100 - total flux cleaned = 0.00427931 Jy ! Component: 2150 - total flux cleaned = 0.00433209 Jy ! Component: 2200 - total flux cleaned = 0.00439454 Jy ! Component: 2250 - total flux cleaned = 0.00442556 Jy ! Component: 2300 - total flux cleaned = 0.00444607 Jy ! Component: 2350 - total flux cleaned = 0.00448644 Jy ! Component: 2400 - total flux cleaned = 0.00454635 Jy ! Component: 2450 - total flux cleaned = 0.00457614 Jy ! Component: 2500 - total flux cleaned = 0.00458594 Jy ! Component: 2550 - total flux cleaned = 0.00466347 Jy ! Component: 2600 - total flux cleaned = 0.00473037 Jy ! Component: 2650 - total flux cleaned = 0.00476815 Jy ! Component: 2700 - total flux cleaned = 0.00477744 Jy ! Component: 2750 - total flux cleaned = 0.0048147 Jy ! Component: 2800 - total flux cleaned = 0.00483329 Jy ! Component: 2850 - total flux cleaned = 0.00486084 Jy ! Component: 2900 - total flux cleaned = 0.00486087 Jy ! Component: 2950 - total flux cleaned = 0.00488797 Jy ! Component: 3000 - total flux cleaned = 0.004888 Jy ! Component: 3050 - total flux cleaned = 0.00491467 Jy ! Component: 3100 - total flux cleaned = 0.0049147 Jy ! Component: 3150 - total flux cleaned = 0.004941 Jy ! Component: 3200 - total flux cleaned = 0.00494975 Jy ! Component: 3250 - total flux cleaned = 0.0049756 Jy ! Component: 3300 - total flux cleaned = 0.00498414 Jy ! Component: 3350 - total flux cleaned = 0.00499258 Jy ! Component: 3400 - total flux cleaned = 0.00500932 Jy ! Component: 3450 - total flux cleaned = 0.00501763 Jy ! Component: 3500 - total flux cleaned = 0.00503429 Jy ! Component: 3550 - total flux cleaned = 0.00503427 Jy ! Component: 3600 - total flux cleaned = 0.00505071 Jy ! Component: 3650 - total flux cleaned = 0.00507522 Jy ! Component: 3700 - total flux cleaned = 0.00508329 Jy ! Component: 3750 - total flux cleaned = 0.00507523 Jy ! Component: 3800 - total flux cleaned = 0.00509936 Jy ! Component: 3850 - total flux cleaned = 0.00513926 Jy ! Component: 3900 - total flux cleaned = 0.00515511 Jy ! Component: 3950 - total flux cleaned = 0.00516304 Jy ! Component: 4000 - total flux cleaned = 0.00518664 Jy ! Component: 4050 - total flux cleaned = 0.00521799 Jy ! Total flux subtracted in 4096 components = 0.00524134 Jy ! Clean residual min=-0.000461 max=0.000529 Jy/beam ! Clean residual mean=0.000001 rms=0.000143 Jy/beam ! Combined flux in latest and established models = 0.0554179 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 327 components and 0.0554179 Jy ![Exited script file: muppet] wmap "J0717+1001_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.488 x 12.43 at -18.99 degrees (North through East) ! Clean map min=-0.0011073 max=0.045875 Jy/beam ! Writing clean map to FITS file: J0717+1001_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0458755 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00013729 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.897798 0.897798 1.7956 3.59119 7.18238 14.3648 28.7295 57.4591 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.045 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.488 x 12.43 at -18.99 degrees (North through East) ! Clean map min=-0.0011073 max=0.045875 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0717+1001_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:07:00 2019