! Started logfile: J0711-0137_S_2017_08_05_pus_uvs.log on Thu May 9 19:23:15 2019 obs J0711-0137_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J0711-0137_S_2017_08_05_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.953681 visibilities/baseline/integration-bin. ! Found source: J0711-0137 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 14248 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0711-0137_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 538 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.922688Jy sigma=0.007961 ! Fit after self-cal, rms=0.913587Jy sigma=0.007887 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.613 mas, bmaj=7.18 mas, bpa=-5.014 degrees ! Estimated noise=1202.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0671214 Jy ! Component: 100 - total flux cleaned = 0.0818175 Jy ! Total flux subtracted in 100 components = 0.0818175 Jy ! Clean residual min=-0.004685 max=0.006706 Jy/beam ! Clean residual mean=0.000001 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.0818175 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0818175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083749Jy sigma=0.000680 ! Fit after self-cal, rms=0.083725Jy sigma=0.000680 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.046 mas, bmaj=8.097 mas, bpa=-5.045 degrees ! Estimated noise=846.409 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00720598 Jy ! Component: 100 - total flux cleaned = 0.0107443 Jy ! Component: 150 - total flux cleaned = 0.0127874 Jy ! Component: 200 - total flux cleaned = 0.0140142 Jy ! Total flux subtracted in 200 components = 0.0140142 Jy ! Clean residual min=-0.003291 max=0.003825 Jy/beam ! Clean residual mean=-0.000001 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.0958317 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 34 components and 0.0958317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083002Jy sigma=0.000676 ! Fit after self-cal, rms=0.083015Jy sigma=0.000675 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.41 FD 0.95 HN 0.96 KP 1.04 ! LA 0.99 MK 1.08 NL 0.91 OV 0.99 ! PT 1.05 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 0.99 KP 0.96 ! LA 1.03 MK 0.99 NL 1.18 OV 1.04 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.97 KP 0.81 ! LA 0.73 MK 1.02 NL 1.26 OV 0.95 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.90 KP 1.00* ! LA 1.00* MK 1.05 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.083015Jy sigma=0.000675 ! Fit after self-cal, rms=0.082642Jy sigma=0.000667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.056 mas, bmaj=8.203 mas, bpa=-4.623 degrees ! Estimated noise=850.343 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.92434e-05 Jy ! Component: 100 - total flux cleaned = -0.0001173 Jy ! Component: 150 - total flux cleaned = -0.00016029 Jy ! Component: 200 - total flux cleaned = -0.000199034 Jy ! Total flux subtracted in 200 components = -0.000199034 Jy ! Clean residual min=-0.003005 max=0.002709 Jy/beam ! Clean residual mean=-0.000003 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.0956327 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.0956327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082624Jy sigma=0.000667 ! Fit after self-cal, rms=0.082667Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082667Jy sigma=0.000667 ! Fit after self-cal, rms=0.084655Jy sigma=0.000662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.055 mas, bmaj=8.229 mas, bpa=-4.549 degrees ! Estimated noise=862.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110571 Jy ! Component: 100 - total flux cleaned = 0.00110711 Jy ! Component: 150 - total flux cleaned = 0.00106355 Jy ! Component: 200 - total flux cleaned = 0.001044 Jy ! Total flux subtracted in 200 components = 0.001044 Jy ! Clean residual min=-0.002595 max=0.002281 Jy/beam ! Clean residual mean=-0.000003 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.0966767 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.0966767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084624Jy sigma=0.000662 ! Fit after self-cal, rms=0.084706Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.39122e-06 Jy ! Component: 100 - total flux cleaned = -8.62056e-05 Jy ! Component: 150 - total flux cleaned = -0.000116833 Jy ! Component: 200 - total flux cleaned = -0.000145738 Jy ! Total flux subtracted in 200 components = -0.000145738 Jy ! Clean residual min=-0.002649 max=0.002230 Jy/beam ! Clean residual mean=-0.000003 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.096531 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 0.096531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084697Jy sigma=0.000662 ! Fit after self-cal, rms=0.084697Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084697Jy sigma=0.000662 ! Fit after self-cal, rms=0.085034Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=8.217 mas, bpa=-4.563 degrees ! Estimated noise=861.356 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155608 Jy ! Component: 100 - total flux cleaned = -0.000211183 Jy ! Component: 150 - total flux cleaned = -0.000235169 Jy ! Component: 200 - total flux cleaned = -0.000242516 Jy ! Total flux subtracted in 200 components = -0.000242516 Jy ! Clean residual min=-0.002452 max=0.002135 Jy/beam ! Clean residual mean=-0.000001 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.0962885 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 55 components and 0.0962885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085031Jy sigma=0.000659 ! Fit after self-cal, rms=0.085082Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.42186e-06 Jy ! Component: 100 - total flux cleaned = -4.15541e-05 Jy ! Component: 150 - total flux cleaned = -4.84099e-05 Jy ! Component: 200 - total flux cleaned = -6.1462e-05 Jy ! Total flux subtracted in 200 components = -6.1462e-05 Jy ! Clean residual min=-0.002466 max=0.002192 Jy/beam ! Clean residual mean=-0.000001 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.096227 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 57 components and 0.096227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085081Jy sigma=0.000658 ! Fit after self-cal, rms=0.085081Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085081Jy sigma=0.000658 ! Fit after self-cal, rms=0.085360Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.282 mas, bmaj=14.1 mas, bpa=-6.111 degrees ! Estimated noise=1110.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000276245 Jy ! Component: 100 - total flux cleaned = -0.000287566 Jy ! Component: 150 - total flux cleaned = -0.000296615 Jy ! Component: 200 - total flux cleaned = -0.000313458 Jy ! Total flux subtracted in 200 components = -0.000313458 Jy ! Clean residual min=-0.003173 max=0.002301 Jy/beam ! Clean residual mean=-0.000001 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.0959136 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 60 components and 0.0959136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085361Jy sigma=0.000658 ! Fit after self-cal, rms=0.085391Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.03682e-05 Jy ! Component: 100 - total flux cleaned = -8.96387e-05 Jy ! Component: 150 - total flux cleaned = -8.91355e-05 Jy ! Component: 200 - total flux cleaned = -9.58663e-05 Jy ! Total flux subtracted in 200 components = -9.58663e-05 Jy ! Clean residual min=-0.003166 max=0.002284 Jy/beam ! Clean residual mean=-0.000001 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.0958177 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 61 components and 0.0958177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085393Jy sigma=0.000658 ! Fit after self-cal, rms=0.085393Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=8.221 mas, bpa=-4.537 degrees ! Estimated noise=861.136 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.064 x 8.221 at -4.537 degrees (North through East) ! Clean map min=-0.0023314 max=0.089221 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.594 mas, bmaj=7.248 mas, bpa=-4.586 degrees ! Estimated noise=1257.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.069644 Jy ! Component: 100 - total flux cleaned = 0.0850514 Jy ! Component: 150 - total flux cleaned = 0.0901416 Jy ! Component: 200 - total flux cleaned = 0.0926674 Jy ! Total flux subtracted in 200 components = 0.0926674 Jy ! Clean residual min=-0.003803 max=0.003512 Jy/beam ! Clean residual mean=0.000000 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.0926674 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0926674 Jy ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=8.221 mas, bpa=-4.537 degrees ! Estimated noise=861.136 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175755 Jy ! Component: 100 - total flux cleaned = 0.00266358 Jy ! Component: 150 - total flux cleaned = 0.00316213 Jy ! Component: 200 - total flux cleaned = 0.00338555 Jy ! Total flux subtracted in 200 components = 0.00338555 Jy ! Clean residual min=-0.002428 max=0.002212 Jy/beam ! Clean residual mean=-0.000001 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.096053 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 30 components and 0.096053 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.282 mas, bmaj=14.1 mas, bpa=-6.111 degrees ! Estimated noise=1110.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000237281 Jy ! Component: 100 - total flux cleaned = -0.000223692 Jy ! Component: 150 - total flux cleaned = -0.000224628 Jy ! Component: 200 - total flux cleaned = -0.000225181 Jy ! Total flux subtracted in 200 components = -0.000225181 Jy ! Clean residual min=-0.003170 max=0.002298 Jy/beam ! Clean residual mean=-0.000001 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.0958278 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.52995e-06 Jy ! Component: 100 - total flux cleaned = -1.43345e-05 Jy ! Component: 150 - total flux cleaned = -2.06321e-05 Jy ! Component: 200 - total flux cleaned = -2.68059e-05 Jy ! Total flux subtracted in 200 components = -2.68059e-05 Jy ! Clean residual min=-0.003167 max=0.002288 Jy/beam ! Clean residual mean=-0.000001 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.095801 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 0.095801 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=8.221 mas, bpa=-4.537 degrees ! Estimated noise=861.136 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175197 Jy ! Component: 100 - total flux cleaned = 0.000112293 Jy ! Component: 150 - total flux cleaned = 0.000112025 Jy ! Component: 200 - total flux cleaned = 0.000138743 Jy ! Total flux subtracted in 200 components = 0.000138743 Jy ! Clean residual min=-0.002411 max=0.002204 Jy/beam ! Clean residual mean=-0.000001 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.0959397 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.0959397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085388Jy sigma=0.000658 ! Fit after self-cal, rms=0.085380Jy sigma=0.000658 wmodel J0711-0137_S_2017_08_05_pus_map.mod ! Writing 50 model components to file: J0711-0137_S_2017_08_05_pus_map.mod wobs J0711-0137_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J0711-0137_S_2017_08_05_pus_uvs.fits wwins J0711-0137_S_2017_08_05_pus_map.win ! wwins: Wrote 1 windows to J0711-0137_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000748004 Jy ! Component: 100 - total flux cleaned = -0.000982858 Jy ! Component: 150 - total flux cleaned = -0.000981066 Jy ! Component: 200 - total flux cleaned = -0.00118322 Jy ! Component: 250 - total flux cleaned = -0.00140928 Jy ! Component: 300 - total flux cleaned = -0.00153425 Jy ! Component: 350 - total flux cleaned = -0.00165481 Jy ! Component: 400 - total flux cleaned = -0.00174272 Jy ! Component: 450 - total flux cleaned = -0.00185583 Jy ! Component: 500 - total flux cleaned = -0.00182866 Jy ! Component: 550 - total flux cleaned = -0.00180183 Jy ! Component: 600 - total flux cleaned = -0.00169596 Jy ! Component: 650 - total flux cleaned = -0.00154091 Jy ! Component: 700 - total flux cleaned = -0.00138843 Jy ! Component: 750 - total flux cleaned = -0.00126357 Jy ! Component: 800 - total flux cleaned = -0.00109174 Jy ! Component: 850 - total flux cleaned = -0.00101931 Jy ! Component: 900 - total flux cleaned = -0.000923725 Jy ! Component: 950 - total flux cleaned = -0.000899945 Jy ! Component: 1000 - total flux cleaned = -0.000737125 Jy ! Component: 1050 - total flux cleaned = -0.000645965 Jy ! Component: 1100 - total flux cleaned = -0.000600868 Jy ! Component: 1150 - total flux cleaned = -0.000511591 Jy ! Component: 1200 - total flux cleaned = -0.000467756 Jy ! Component: 1250 - total flux cleaned = -0.00044594 Jy ! Component: 1300 - total flux cleaned = -0.00038186 Jy ! Component: 1350 - total flux cleaned = -0.000296898 Jy ! Component: 1400 - total flux cleaned = -0.000297009 Jy ! Component: 1450 - total flux cleaned = -0.000276016 Jy ! Component: 1500 - total flux cleaned = -0.000276059 Jy ! Component: 1550 - total flux cleaned = -0.000275735 Jy ! Component: 1600 - total flux cleaned = -0.000235274 Jy ! Component: 1650 - total flux cleaned = -0.000255448 Jy ! Component: 1700 - total flux cleaned = -0.000255488 Jy ! Component: 1750 - total flux cleaned = -0.000235728 Jy ! Component: 1800 - total flux cleaned = -0.000236003 Jy ! Component: 1850 - total flux cleaned = -0.00025542 Jy ! Component: 1900 - total flux cleaned = -0.000255481 Jy ! Component: 1950 - total flux cleaned = -0.000236675 Jy ! Component: 2000 - total flux cleaned = -0.000292688 Jy ! Component: 2050 - total flux cleaned = -0.000329825 Jy ! Component: 2100 - total flux cleaned = -0.000421975 Jy ! Component: 2150 - total flux cleaned = -0.000403518 Jy ! Component: 2200 - total flux cleaned = -0.000512427 Jy ! Component: 2250 - total flux cleaned = -0.000584392 Jy ! Component: 2300 - total flux cleaned = -0.000620301 Jy ! Component: 2350 - total flux cleaned = -0.000620213 Jy ! Component: 2400 - total flux cleaned = -0.000655437 Jy ! Component: 2450 - total flux cleaned = -0.00067274 Jy ! Component: 2500 - total flux cleaned = -0.000776282 Jy ! Component: 2550 - total flux cleaned = -0.000724809 Jy ! Component: 2600 - total flux cleaned = -0.000810078 Jy ! Component: 2650 - total flux cleaned = -0.000810125 Jy ! Component: 2700 - total flux cleaned = -0.000893954 Jy ! Component: 2750 - total flux cleaned = -0.000894004 Jy ! Component: 2800 - total flux cleaned = -0.000960141 Jy ! Component: 2850 - total flux cleaned = -0.00104223 Jy ! Component: 2900 - total flux cleaned = -0.00104198 Jy ! Component: 2950 - total flux cleaned = -0.00112296 Jy ! Component: 3000 - total flux cleaned = -0.00112283 Jy ! Component: 3050 - total flux cleaned = -0.00109098 Jy ! Component: 3100 - total flux cleaned = -0.00120213 Jy ! Component: 3150 - total flux cleaned = -0.0011862 Jy ! Component: 3200 - total flux cleaned = -0.00113933 Jy ! Component: 3250 - total flux cleaned = -0.0012483 Jy ! Component: 3300 - total flux cleaned = -0.00131007 Jy ! Component: 3350 - total flux cleaned = -0.00140197 Jy ! Component: 3400 - total flux cleaned = -0.00134087 Jy ! Component: 3450 - total flux cleaned = -0.00135595 Jy ! Component: 3500 - total flux cleaned = -0.00141612 Jy ! Component: 3550 - total flux cleaned = -0.00146097 Jy ! Component: 3600 - total flux cleaned = -0.00146096 Jy ! Component: 3650 - total flux cleaned = -0.00150533 Jy ! Component: 3700 - total flux cleaned = -0.00153478 Jy ! Component: 3750 - total flux cleaned = -0.00150565 Jy ! Component: 3800 - total flux cleaned = -0.00153483 Jy ! Component: 3850 - total flux cleaned = -0.001535 Jy ! Component: 3900 - total flux cleaned = -0.00153519 Jy ! Component: 3950 - total flux cleaned = -0.00157807 Jy ! Component: 4000 - total flux cleaned = -0.00159229 Jy ! Component: 4050 - total flux cleaned = -0.00160644 Jy ! Total flux subtracted in 4096 components = -0.00163454 Jy ! Clean residual min=-0.001043 max=0.000920 Jy/beam ! Clean residual mean=-0.000000 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.0943052 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 330 components and 0.0943052 Jy ![Exited script file: muppet] wmap "J0711-0137_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.064 x 8.221 at -4.537 degrees (North through East) ! Clean map min=-0.0021877 max=0.089439 Jy/beam ! Writing clean map to FITS file: J0711-0137_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0894392 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000251613 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.84397 0.84397 1.68794 3.37588 6.75176 13.5035 27.007 54.0141 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.089 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.064 x 8.221 at -4.537 degrees (North through East) ! Clean map min=-0.0021877 max=0.089439 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0711-0137_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:23:20 2019