! Started logfile: J0711+0048_S_2017_09_26_pus_uvs.log on Sat May 11 12:56:53 2019 obs J0711+0048_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0711+0048_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.670446 visibilities/baseline/integration-bin. ! Found source: J0711+0048 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 28384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0711+0048_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 597 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 479 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 553 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1705 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.935216Jy sigma=0.007491 ! Fit after self-cal, rms=0.911971Jy sigma=0.007321 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.52 mas, bmaj=13.45 mas, bpa=-20.74 degrees ! Estimated noise=988.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0608895 Jy ! Component: 100 - total flux cleaned = 0.0891297 Jy ! Total flux subtracted in 100 components = 0.0891297 Jy ! Clean residual min=-0.011866 max=0.022449 Jy/beam ! Clean residual mean=-0.000124 rms=0.004120 Jy/beam ! Combined flux in latest and established models = 0.0891297 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0891297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114003Jy sigma=0.000892 ! Fit after self-cal, rms=0.113487Jy sigma=0.000888 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.645 mas, bmaj=14.57 mas, bpa=-17.38 degrees ! Estimated noise=619.906 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0361721 Jy ! Component: 100 - total flux cleaned = 0.0597702 Jy ! Component: 150 - total flux cleaned = 0.07643 Jy ! Component: 200 - total flux cleaned = 0.0883644 Jy ! Total flux subtracted in 200 components = 0.0883644 Jy ! Clean residual min=-0.014969 max=0.024817 Jy/beam ! Clean residual mean=-0.000142 rms=0.004697 Jy/beam ! Combined flux in latest and established models = 0.177494 Jy ! Performing phase self-cal ! Adding 94 model components to the UV plane model. ! The established model now contains 117 components and 0.177494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100183Jy sigma=0.000759 ! Fit after self-cal, rms=0.099349Jy sigma=0.000752 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* HN 1.00 KP 0.93 ! LA 1.07 MK 1.03 NL 1.09 OV 0.87 ! PT 0.81 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.38 FD 1.00* HN 1.03 KP 0.96 ! LA 0.95 MK 1.28 NL 1.27 OV 1.01 ! PT 0.81 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* HN 1.01 KP 0.99 ! LA 0.98 MK 1.06 NL 1.27 OV 0.97 ! PT 0.80 ! ! ! Correcting IF 4. ! A total of 645 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.25 MK 1.29 NL 1.00* OV 0.78 ! PT 0.65 ! ! ! Fit before self-cal, rms=0.099349Jy sigma=0.000752 ! Fit after self-cal, rms=0.102943Jy sigma=0.000725 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.745 mas, bmaj=15.16 mas, bpa=-17.09 degrees ! Estimated noise=630.721 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (114, 100.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016588 Jy ! Component: 100 - total flux cleaned = 0.0238364 Jy ! Component: 150 - total flux cleaned = 0.0261155 Jy ! Component: 200 - total flux cleaned = 0.0270469 Jy ! Total flux subtracted in 200 components = 0.0270469 Jy ! Clean residual min=-0.007588 max=0.011030 Jy/beam ! Clean residual mean=-0.000054 rms=0.002607 Jy/beam ! Combined flux in latest and established models = 0.204541 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 162 components and 0.204541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100268Jy sigma=0.000701 ! Fit after self-cal, rms=0.100201Jy sigma=0.000695 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100201Jy sigma=0.000695 ! Fit after self-cal, rms=0.097208Jy sigma=0.000688 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.82 mas, bmaj=14.89 mas, bpa=-17.33 degrees ! Estimated noise=628.595 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00573878 Jy ! Component: 100 - total flux cleaned = 0.00722833 Jy ! Component: 150 - total flux cleaned = 0.00789616 Jy ! Component: 200 - total flux cleaned = 0.00801294 Jy ! Total flux subtracted in 200 components = 0.00801294 Jy ! Clean residual min=-0.006349 max=0.009223 Jy/beam ! Clean residual mean=-0.000037 rms=0.002142 Jy/beam ! Combined flux in latest and established models = 0.212554 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 200 components and 0.212554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096544Jy sigma=0.000683 ! Fit after self-cal, rms=0.096403Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 60). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00698406 Jy ! Component: 100 - total flux cleaned = 0.00821021 Jy ! Component: 150 - total flux cleaned = 0.0093133 Jy ! Component: 200 - total flux cleaned = 0.0105478 Jy ! Total flux subtracted in 200 components = 0.0105478 Jy ! Clean residual min=-0.005220 max=0.008014 Jy/beam ! Clean residual mean=-0.000033 rms=0.001673 Jy/beam ! Combined flux in latest and established models = 0.223102 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 246 components and 0.223102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095493Jy sigma=0.000672 ! Fit after self-cal, rms=0.095261Jy sigma=0.000672 ! Inverting map ! Added new window around map position (9.5, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00714387 Jy ! Component: 100 - total flux cleaned = 0.00935934 Jy ! Component: 150 - total flux cleaned = 0.0106605 Jy ! Component: 200 - total flux cleaned = 0.0114662 Jy ! Total flux subtracted in 200 components = 0.0114662 Jy ! Clean residual min=-0.004433 max=0.004563 Jy/beam ! Clean residual mean=-0.000026 rms=0.001349 Jy/beam ! Combined flux in latest and established models = 0.234568 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 294 components and 0.234568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094549Jy sigma=0.000666 ! Fit after self-cal, rms=0.094298Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094298Jy sigma=0.000665 ! Fit after self-cal, rms=0.092699Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.847 mas, bmaj=14.81 mas, bpa=-17.38 degrees ! Estimated noise=623.822 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279844 Jy ! Component: 100 - total flux cleaned = 0.00446363 Jy ! Component: 150 - total flux cleaned = 0.00467495 Jy ! Component: 200 - total flux cleaned = 0.00467587 Jy ! Total flux subtracted in 200 components = 0.00467587 Jy ! Clean residual min=-0.003620 max=0.003850 Jy/beam ! Clean residual mean=-0.000014 rms=0.001126 Jy/beam ! Combined flux in latest and established models = 0.239244 Jy selfcal ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 318 components and 0.239244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092345Jy sigma=0.000661 ! Fit after self-cal, rms=0.092197Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170767 Jy ! Component: 100 - total flux cleaned = 0.00209056 Jy ! Component: 150 - total flux cleaned = 0.00192328 Jy ! Component: 200 - total flux cleaned = 0.00184821 Jy ! Total flux subtracted in 200 components = 0.00184821 Jy ! Clean residual min=-0.003373 max=0.003529 Jy/beam ! Clean residual mean=-0.000014 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.241092 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 334 components and 0.241092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092024Jy sigma=0.000659 ! Fit after self-cal, rms=0.091998Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091998Jy sigma=0.000659 ! Fit after self-cal, rms=0.091283Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.246 mas, bmaj=15.98 mas, bpa=-14.42 degrees ! Estimated noise=662.507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218461 Jy ! Component: 100 - total flux cleaned = 0.00264885 Jy ! Component: 150 - total flux cleaned = 0.00233128 Jy ! Component: 200 - total flux cleaned = 0.0018343 Jy ! Total flux subtracted in 200 components = 0.0018343 Jy ! Clean residual min=-0.003546 max=0.003915 Jy/beam ! Clean residual mean=-0.000012 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.242926 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 364 components and 0.242926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091165Jy sigma=0.000657 ! Fit after self-cal, rms=0.091117Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000582793 Jy ! Component: 100 - total flux cleaned = 0.000452832 Jy ! Component: 150 - total flux cleaned = 0.000150494 Jy ! Component: 200 - total flux cleaned = -0.000183343 Jy ! Total flux subtracted in 200 components = -0.000183343 Jy ! Clean residual min=-0.003470 max=0.003753 Jy/beam ! Clean residual mean=-0.000015 rms=0.001095 Jy/beam ! Combined flux in latest and established models = 0.242743 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 390 components and 0.242743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091056Jy sigma=0.000657 ! Fit after self-cal, rms=0.091045Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.863 mas, bmaj=14.75 mas, bpa=-17.28 degrees ! Estimated noise=621.631 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.863 x 14.75 at -17.28 degrees (North through East) ! Clean map min=-0.0060313 max=0.081259 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.704 mas, bmaj=13.51 mas, bpa=-20.54 degrees ! Estimated noise=1012.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0605706 Jy ! Component: 100 - total flux cleaned = 0.0928127 Jy ! Component: 150 - total flux cleaned = 0.115178 Jy ! Component: 200 - total flux cleaned = 0.132456 Jy ! Total flux subtracted in 200 components = 0.132456 Jy ! Clean residual min=-0.009615 max=0.010326 Jy/beam ! Clean residual mean=-0.000079 rms=0.003068 Jy/beam ! Combined flux in latest and established models = 0.132457 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 56 model components to the UV plane model. ! The established model now contains 56 components and 0.132457 Jy ! Inverting map and beam ! Estimated beam: bmin=4.863 mas, bmaj=14.75 mas, bpa=-17.28 degrees ! Estimated noise=621.631 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0216074 Jy ! Component: 100 - total flux cleaned = 0.0371443 Jy ! Component: 150 - total flux cleaned = 0.049392 Jy ! Component: 200 - total flux cleaned = 0.0582432 Jy ! Total flux subtracted in 200 components = 0.0582432 Jy ! Clean residual min=-0.007615 max=0.007584 Jy/beam ! Clean residual mean=-0.000055 rms=0.002500 Jy/beam ! Combined flux in latest and established models = 0.1907 Jy ! Adding 119 model components to the UV plane model. ! The established model now contains 171 components and 0.1907 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.246 mas, bmaj=15.98 mas, bpa=-14.42 degrees ! Estimated noise=662.507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102124 Jy ! Component: 100 - total flux cleaned = 0.0178384 Jy ! Component: 150 - total flux cleaned = 0.0229283 Jy ! Component: 200 - total flux cleaned = 0.0267801 Jy ! Total flux subtracted in 200 components = 0.0267801 Jy ! Clean residual min=-0.006780 max=0.008121 Jy/beam ! Clean residual mean=-0.000042 rms=0.002207 Jy/beam ! Combined flux in latest and established models = 0.21748 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272964 Jy ! Component: 100 - total flux cleaned = 0.00496574 Jy ! Component: 150 - total flux cleaned = 0.00696663 Jy ! Component: 200 - total flux cleaned = 0.00861483 Jy ! Total flux subtracted in 200 components = 0.00861483 Jy ! Clean residual min=-0.005013 max=0.006372 Jy/beam ! Clean residual mean=-0.000029 rms=0.001679 Jy/beam ! Combined flux in latest and established models = 0.226095 Jy ! Adding 164 model components to the UV plane model. ! The established model now contains 302 components and 0.226095 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.863 mas, bmaj=14.75 mas, bpa=-17.28 degrees ! Estimated noise=621.631 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126 Jy ! Component: 100 - total flux cleaned = 0.00229111 Jy ! Component: 150 - total flux cleaned = 0.00311751 Jy ! Component: 200 - total flux cleaned = 0.00419863 Jy ! Total flux subtracted in 200 components = 0.00419863 Jy ! Clean residual min=-0.003760 max=0.004027 Jy/beam ! Clean residual mean=-0.000016 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 0.230293 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 340 components and 0.230293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091360Jy sigma=0.000659 ! Fit after self-cal, rms=0.091233Jy sigma=0.000658 wmodel J0711+0048_S_2017_09_26_pus_map.mod ! Writing 340 model components to file: J0711+0048_S_2017_09_26_pus_map.mod wobs J0711+0048_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0711+0048_S_2017_09_26_pus_uvs.fits wwins J0711+0048_S_2017_09_26_pus_map.win ! wwins: Wrote 4 windows to J0711+0048_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000265638 Jy ! Component: 100 - total flux cleaned = -2.40887e-05 Jy ! Component: 150 - total flux cleaned = -0.000132435 Jy ! Component: 200 - total flux cleaned = -0.000330627 Jy ! Component: 250 - total flux cleaned = -0.000471481 Jy ! Component: 300 - total flux cleaned = -0.00083165 Jy ! Component: 350 - total flux cleaned = -0.00130395 Jy ! Component: 400 - total flux cleaned = -0.00171372 Jy ! Component: 450 - total flux cleaned = -0.00198996 Jy ! Component: 500 - total flux cleaned = -0.00225488 Jy ! Component: 550 - total flux cleaned = -0.00232753 Jy ! Component: 600 - total flux cleaned = -0.00260894 Jy ! Component: 650 - total flux cleaned = -0.00274409 Jy ! Component: 700 - total flux cleaned = -0.00284285 Jy ! Component: 750 - total flux cleaned = -0.00296968 Jy ! Component: 800 - total flux cleaned = -0.00303136 Jy ! Component: 850 - total flux cleaned = -0.00306184 Jy ! Component: 900 - total flux cleaned = -0.00320536 Jy ! Component: 950 - total flux cleaned = -0.00326062 Jy ! Component: 1000 - total flux cleaned = -0.00331458 Jy ! Component: 1050 - total flux cleaned = -0.00336797 Jy ! Component: 1100 - total flux cleaned = -0.0033677 Jy ! Component: 1150 - total flux cleaned = -0.0032945 Jy ! Component: 1200 - total flux cleaned = -0.00331946 Jy ! Component: 1250 - total flux cleaned = -0.00341268 Jy ! Component: 1300 - total flux cleaned = -0.00332015 Jy ! Component: 1350 - total flux cleaned = -0.00331983 Jy ! Component: 1400 - total flux cleaned = -0.00327551 Jy ! Component: 1450 - total flux cleaned = -0.00321114 Jy ! Component: 1500 - total flux cleaned = -0.00316974 Jy ! Component: 1550 - total flux cleaned = -0.00318987 Jy ! Component: 1600 - total flux cleaned = -0.00313055 Jy ! Component: 1650 - total flux cleaned = -0.0030344 Jy ! Component: 1700 - total flux cleaned = -0.00301585 Jy ! Component: 1750 - total flux cleaned = -0.00297961 Jy ! Component: 1800 - total flux cleaned = -0.00296164 Jy ! Component: 1850 - total flux cleaned = -0.00287438 Jy ! Component: 1900 - total flux cleaned = -0.00280642 Jy ! Component: 1950 - total flux cleaned = -0.00272251 Jy ! Component: 2000 - total flux cleaned = -0.00264027 Jy ! Component: 2050 - total flux cleaned = -0.00259207 Jy ! Component: 2100 - total flux cleaned = -0.00254481 Jy ! Component: 2150 - total flux cleaned = -0.00243693 Jy ! Component: 2200 - total flux cleaned = -0.00242205 Jy ! Component: 2250 - total flux cleaned = -0.00236232 Jy ! Component: 2300 - total flux cleaned = -0.00231868 Jy ! Component: 2350 - total flux cleaned = -0.00223297 Jy ! Component: 2400 - total flux cleaned = -0.00219096 Jy ! Component: 2450 - total flux cleaned = -0.00219114 Jy ! Component: 2500 - total flux cleaned = -0.00213666 Jy ! Component: 2550 - total flux cleaned = -0.00212326 Jy ! Component: 2600 - total flux cleaned = -0.00207043 Jy ! Component: 2650 - total flux cleaned = -0.00208339 Jy ! Component: 2700 - total flux cleaned = -0.00207042 Jy ! Component: 2750 - total flux cleaned = -0.00201992 Jy ! Component: 2800 - total flux cleaned = -0.0019452 Jy ! Component: 2850 - total flux cleaned = -0.00190819 Jy ! Component: 2900 - total flux cleaned = -0.00184739 Jy ! Component: 2950 - total flux cleaned = -0.00176341 Jy ! Component: 3000 - total flux cleaned = -0.0016924 Jy ! Component: 3050 - total flux cleaned = -0.00162222 Jy ! Component: 3100 - total flux cleaned = -0.00155295 Jy ! Component: 3150 - total flux cleaned = -0.00150707 Jy ! Component: 3200 - total flux cleaned = -0.00145037 Jy ! Component: 3250 - total flux cleaned = -0.00141658 Jy ! Component: 3300 - total flux cleaned = -0.00137191 Jy ! Component: 3350 - total flux cleaned = -0.00131676 Jy ! Component: 3400 - total flux cleaned = -0.00128404 Jy ! Component: 3450 - total flux cleaned = -0.00122988 Jy ! Component: 3500 - total flux cleaned = -0.00121921 Jy ! Component: 3550 - total flux cleaned = -0.00121921 Jy ! Component: 3600 - total flux cleaned = -0.0011556 Jy ! Component: 3650 - total flux cleaned = -0.00114505 Jy ! Component: 3700 - total flux cleaned = -0.00110319 Jy ! Component: 3750 - total flux cleaned = -0.00111354 Jy ! Component: 3800 - total flux cleaned = -0.00111355 Jy ! Component: 3850 - total flux cleaned = -0.0011135 Jy ! Component: 3900 - total flux cleaned = -0.00110327 Jy ! Component: 3950 - total flux cleaned = -0.0011033 Jy ! Component: 4000 - total flux cleaned = -0.00113345 Jy ! Component: 4050 - total flux cleaned = -0.00113337 Jy ! Total flux subtracted in 4096 components = -0.00111343 Jy ! Clean residual min=-0.000642 max=0.000547 Jy/beam ! Clean residual mean=-0.000004 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.22918 Jy keep ! Adding 347 model components to the UV plane model. ! The established model now contains 686 components and 0.22918 Jy ![Exited script file: muppet] wmap "J0711+0048_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.863 x 14.75 at -17.28 degrees (North through East) ! Clean map min=-0.0039885 max=0.079837 Jy/beam ! Writing clean map to FITS file: J0711+0048_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.079837 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000190632 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.716328 0.716328 1.43266 2.86531 5.73062 11.4612 22.9225 45.845 91.69 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.079 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.863 x 14.75 at -17.28 degrees (North through East) ! Clean map min=-0.0039885 max=0.079837 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0711+0048_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:56:59 2019