! Started logfile: J0710-3850_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:07:51 2019 obs J0710-3850_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0710-3850_S_2017_01_16_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.610536 visibilities/baseline/integration-bin. ! Found source: J0710-3850 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 12748 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0710-3850_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 248 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 421 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.609855Jy sigma=0.002844 ! Fit after self-cal, rms=0.579069Jy sigma=0.002652 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.099 mas, bmaj=10.12 mas, bpa=17.63 degrees ! Estimated noise=2774.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.383028 Jy ! Component: 100 - total flux cleaned = 0.506799 Jy ! Total flux subtracted in 100 components = 0.506799 Jy ! Clean residual min=-0.032864 max=0.064209 Jy/beam ! Clean residual mean=-0.001342 rms=0.011856 Jy/beam ! Combined flux in latest and established models = 0.506799 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.506799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.375555Jy sigma=0.001163 ! Fit after self-cal, rms=0.375496Jy sigma=0.001162 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.943 mas, bmaj=12.95 mas, bpa=15.24 degrees ! Estimated noise=1303.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100887 Jy ! Component: 100 - total flux cleaned = 0.152577 Jy ! Component: 150 - total flux cleaned = 0.179582 Jy ! Component: 200 - total flux cleaned = 0.193776 Jy ! Total flux subtracted in 200 components = 0.193776 Jy ! Clean residual min=-0.024183 max=0.029860 Jy/beam ! Clean residual mean=-0.000823 rms=0.008068 Jy/beam ! Combined flux in latest and established models = 0.700575 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 41 components and 0.700575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.337968Jy sigma=0.000910 ! Fit after self-cal, rms=0.337955Jy sigma=0.000910 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.91 HN 1.10 KP 0.98 ! LA 0.97 MK 1.00* NL 1.13 OV 0.96 ! PT 1.01 SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.63 FD 0.96 HN 1.31 KP 0.96 ! LA 0.94 MK 1.00* NL 1.27 OV 0.99 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.50 FD 0.98 HN 1.19 KP 1.00 ! LA 0.97 MK 1.00* NL 1.22 OV 0.92 ! PT 1.00 SC 0.94 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.83 FD 1.00 HN 1.43 KP 0.82 ! LA 0.68 MK 1.00* NL 1.00* OV 0.89 ! PT 1.04 SC 1.00 ! ! ! Fit before self-cal, rms=0.337955Jy sigma=0.000910 ! Fit after self-cal, rms=0.276921Jy sigma=0.000785 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.896 mas, bmaj=13.13 mas, bpa=15.57 degrees ! Estimated noise=1326.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311001 Jy ! Component: 100 - total flux cleaned = 0.00310158 Jy ! Component: 150 - total flux cleaned = 0.00337149 Jy ! Component: 200 - total flux cleaned = 0.0038309 Jy ! Total flux subtracted in 200 components = 0.0038309 Jy ! Clean residual min=-0.012172 max=0.011950 Jy/beam ! Clean residual mean=-0.000401 rms=0.003650 Jy/beam ! Combined flux in latest and established models = 0.704406 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 59 components and 0.704406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.275844Jy sigma=0.000781 ! Fit after self-cal, rms=0.276029Jy sigma=0.000781 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.276029Jy sigma=0.000781 ! Fit after self-cal, rms=0.294926Jy sigma=0.000764 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.898 mas, bmaj=13.19 mas, bpa=15.39 degrees ! Estimated noise=1338.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0078986 Jy ! Component: 100 - total flux cleaned = 0.00959273 Jy ! Component: 150 - total flux cleaned = 0.00991472 Jy ! Component: 200 - total flux cleaned = 0.00992056 Jy ! Total flux subtracted in 200 components = 0.00992056 Jy ! Clean residual min=-0.009886 max=0.011181 Jy/beam ! Clean residual mean=-0.000106 rms=0.002889 Jy/beam ! Combined flux in latest and established models = 0.714326 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 77 components and 0.714326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293902Jy sigma=0.000765 ! Fit after self-cal, rms=0.293958Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017813 Jy ! Component: 100 - total flux cleaned = -0.000272926 Jy ! Component: 150 - total flux cleaned = -0.000357887 Jy ! Component: 200 - total flux cleaned = -0.000436555 Jy ! Total flux subtracted in 200 components = -0.000436555 Jy ! Clean residual min=-0.009529 max=0.011081 Jy/beam ! Clean residual mean=-0.000107 rms=0.002866 Jy/beam ! Combined flux in latest and established models = 0.71389 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 83 components and 0.71389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293875Jy sigma=0.000765 ! Fit after self-cal, rms=0.293868Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293868Jy sigma=0.000765 ! Fit after self-cal, rms=0.299350Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.898 mas, bmaj=13.19 mas, bpa=15.33 degrees ! Estimated noise=1356.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00745374 Jy ! Component: 100 - total flux cleaned = 0.0095266 Jy ! Component: 150 - total flux cleaned = 0.00971002 Jy ! Component: 200 - total flux cleaned = 0.00978981 Jy ! Total flux subtracted in 200 components = 0.00978981 Jy ! Clean residual min=-0.009338 max=0.011335 Jy/beam ! Clean residual mean=-0.000104 rms=0.002867 Jy/beam ! Combined flux in latest and established models = 0.72368 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 88 components and 0.72368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298353Jy sigma=0.000764 ! Fit after self-cal, rms=0.298346Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000211827 Jy ! Component: 100 - total flux cleaned = -0.000286245 Jy ! Component: 150 - total flux cleaned = -0.000287579 Jy ! Component: 200 - total flux cleaned = -0.000420884 Jy ! Total flux subtracted in 200 components = -0.000420884 Jy ! Clean residual min=-0.009280 max=0.011262 Jy/beam ! Clean residual mean=-0.000105 rms=0.002854 Jy/beam ! Combined flux in latest and established models = 0.723259 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 90 components and 0.723259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298295Jy sigma=0.000764 ! Fit after self-cal, rms=0.298292Jy sigma=0.000764 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298292Jy sigma=0.000764 ! Fit after self-cal, rms=0.303942Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.959 mas, bmaj=27.11 mas, bpa=4.739 degrees ! Estimated noise=1584.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00864544 Jy ! Component: 100 - total flux cleaned = 0.0102488 Jy ! Component: 150 - total flux cleaned = 0.010335 Jy ! Component: 200 - total flux cleaned = 0.0104024 Jy ! Total flux subtracted in 200 components = 0.0104024 Jy ! Clean residual min=-0.011987 max=0.014065 Jy/beam ! Clean residual mean=-0.000165 rms=0.003983 Jy/beam ! Combined flux in latest and established models = 0.733661 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 94 components and 0.733661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.302927Jy sigma=0.000764 ! Fit after self-cal, rms=0.302906Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000154361 Jy ! Component: 100 - total flux cleaned = -0.000213949 Jy ! Component: 150 - total flux cleaned = -0.000264178 Jy ! Component: 200 - total flux cleaned = -0.00031365 Jy ! Total flux subtracted in 200 components = -0.00031365 Jy ! Clean residual min=-0.011889 max=0.013882 Jy/beam ! Clean residual mean=-0.000166 rms=0.003981 Jy/beam ! Combined flux in latest and established models = 0.733348 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 96 components and 0.733347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.302830Jy sigma=0.000764 ! Fit after self-cal, rms=0.302819Jy sigma=0.000764 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.898 mas, bmaj=13.21 mas, bpa=15.29 degrees ! Estimated noise=1375.58 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.898 x 13.21 at 15.29 degrees (North through East) ! Clean map min=-0.009379 max=0.51585 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.302819Jy sigma=0.000764 ! Fit after self-cal, rms=0.278116Jy sigma=0.000615 ! Inverting map and beam ! Estimated beam: bmin=3.907 mas, bmaj=13.24 mas, bpa=15.19 degrees ! Estimated noise=1376.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00194264 Jy ! Component: 100 - total flux cleaned = -0.00234829 Jy ! Component: 150 - total flux cleaned = -0.0025182 Jy ! Component: 200 - total flux cleaned = -0.00259802 Jy ! Total flux subtracted in 200 components = -0.00259802 Jy ! Clean residual min=-0.007238 max=0.010704 Jy/beam ! Clean residual mean=-0.000196 rms=0.002285 Jy/beam ! Combined flux in latest and established models = 0.730749 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 105 components and 0.730749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277972Jy sigma=0.000615 ! Fit after self-cal, rms=0.277977Jy sigma=0.000615 ! Inverting map ! Added new window around map position (13, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00981173 Jy ! Component: 100 - total flux cleaned = 0.0145101 Jy ! Component: 150 - total flux cleaned = 0.0159914 Jy ! Component: 200 - total flux cleaned = 0.0163377 Jy ! Total flux subtracted in 200 components = 0.0163377 Jy ! Clean residual min=-0.006653 max=0.007909 Jy/beam ! Clean residual mean=-0.000138 rms=0.001859 Jy/beam ! Combined flux in latest and established models = 0.747087 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 125 components and 0.747087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277611Jy sigma=0.000611 ! Fit after self-cal, rms=0.277637Jy sigma=0.000611 ! Inverting map ! Added new window around map position (42, 22.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00737912 Jy ! Component: 100 - total flux cleaned = 0.00994209 Jy ! Component: 150 - total flux cleaned = 0.0104578 Jy ! Component: 200 - total flux cleaned = 0.0109178 Jy ! Total flux subtracted in 200 components = 0.0109178 Jy ! Clean residual min=-0.006051 max=0.005140 Jy/beam ! Clean residual mean=-0.000066 rms=0.001564 Jy/beam ! Combined flux in latest and established models = 0.758005 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 158 components and 0.758005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277361Jy sigma=0.000608 ! Fit after self-cal, rms=0.277279Jy sigma=0.000608 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277279Jy sigma=0.000608 ! Fit after self-cal, rms=0.276233Jy sigma=0.000608 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=10.29 mas, bpa=17.49 degrees ! Estimated noise=2956.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.407909 Jy ! Component: 100 - total flux cleaned = 0.541687 Jy ! Component: 150 - total flux cleaned = 0.60844 Jy ! Component: 200 - total flux cleaned = 0.646573 Jy ! Total flux subtracted in 200 components = 0.646573 Jy ! Clean residual min=-0.011075 max=0.021267 Jy/beam ! Clean residual mean=-0.000430 rms=0.003895 Jy/beam ! Combined flux in latest and established models = 0.646573 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.646573 Jy ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=13.24 mas, bpa=15.2 degrees ! Estimated noise=1374.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0361555 Jy ! Component: 100 - total flux cleaned = 0.0562885 Jy ! Component: 150 - total flux cleaned = 0.0694454 Jy ! Component: 200 - total flux cleaned = 0.0790139 Jy ! Total flux subtracted in 200 components = 0.0790139 Jy ! Clean residual min=-0.007133 max=0.006430 Jy/beam ! Clean residual mean=-0.000198 rms=0.002104 Jy/beam ! Combined flux in latest and established models = 0.725586 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 103 components and 0.725586 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.986 mas, bmaj=27.21 mas, bpa=4.707 degrees ! Estimated noise=1579.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102445 Jy ! Component: 100 - total flux cleaned = 0.0174297 Jy ! Component: 150 - total flux cleaned = 0.0228077 Jy ! Component: 200 - total flux cleaned = 0.0269885 Jy ! Total flux subtracted in 200 components = 0.0269885 Jy ! Clean residual min=-0.006467 max=0.006259 Jy/beam ! Clean residual mean=-0.000149 rms=0.001978 Jy/beam ! Combined flux in latest and established models = 0.752575 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025521 Jy ! Component: 100 - total flux cleaned = 0.00399801 Jy ! Component: 150 - total flux cleaned = 0.00487286 Jy ! Component: 200 - total flux cleaned = 0.00539776 Jy ! Total flux subtracted in 200 components = 0.00539776 Jy ! Clean residual min=-0.006042 max=0.006071 Jy/beam ! Clean residual mean=-0.000110 rms=0.001812 Jy/beam ! Combined flux in latest and established models = 0.757973 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 152 components and 0.757972 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=13.24 mas, bpa=15.2 degrees ! Estimated noise=1374.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102045 Jy ! Component: 100 - total flux cleaned = -0.000768019 Jy ! Component: 150 - total flux cleaned = -0.000540157 Jy ! Component: 200 - total flux cleaned = -0.000232445 Jy ! Total flux subtracted in 200 components = -0.000232445 Jy ! Clean residual min=-0.004867 max=0.004866 Jy/beam ! Clean residual mean=-0.000067 rms=0.001348 Jy/beam ! Combined flux in latest and established models = 0.75774 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 175 components and 0.75774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.276103Jy sigma=0.000606 ! Fit after self-cal, rms=0.276052Jy sigma=0.000606 wmodel J0710-3850_S_2017_01_16_pus_map.mod ! Writing 175 model components to file: J0710-3850_S_2017_01_16_pus_map.mod wobs J0710-3850_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0710-3850_S_2017_01_16_pus_uvs.fits wwins J0710-3850_S_2017_01_16_pus_map.win ! wwins: Wrote 4 windows to J0710-3850_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00181495 Jy ! Component: 100 - total flux cleaned = -0.00287217 Jy ! Component: 150 - total flux cleaned = -0.00363551 Jy ! Component: 200 - total flux cleaned = -0.00428322 Jy ! Component: 250 - total flux cleaned = -0.00475845 Jy ! Component: 300 - total flux cleaned = -0.00508192 Jy ! Component: 350 - total flux cleaned = -0.00570091 Jy ! Component: 400 - total flux cleaned = -0.00605854 Jy ! Component: 450 - total flux cleaned = -0.0065215 Jy ! Component: 500 - total flux cleaned = -0.00691339 Jy ! Component: 550 - total flux cleaned = -0.00729229 Jy ! Component: 600 - total flux cleaned = -0.00750307 Jy ! Component: 650 - total flux cleaned = -0.00786132 Jy ! Component: 700 - total flux cleaned = -0.00805912 Jy ! Component: 750 - total flux cleaned = -0.00815605 Jy ! Component: 800 - total flux cleaned = -0.00834535 Jy ! Component: 850 - total flux cleaned = -0.00839082 Jy ! Component: 900 - total flux cleaned = -0.00843629 Jy ! Component: 950 - total flux cleaned = -0.00856883 Jy ! Component: 1000 - total flux cleaned = -0.00861206 Jy ! Component: 1050 - total flux cleaned = -0.00865443 Jy ! Component: 1100 - total flux cleaned = -0.00869496 Jy ! Component: 1150 - total flux cleaned = -0.00861365 Jy ! Component: 1200 - total flux cleaned = -0.00869326 Jy ! Component: 1250 - total flux cleaned = -0.00865458 Jy ! Component: 1300 - total flux cleaned = -0.00869337 Jy ! Component: 1350 - total flux cleaned = -0.00880638 Jy ! Component: 1400 - total flux cleaned = -0.00884373 Jy ! Component: 1450 - total flux cleaned = -0.00880772 Jy ! Component: 1500 - total flux cleaned = -0.00884405 Jy ! Component: 1550 - total flux cleaned = -0.00877346 Jy ! Component: 1600 - total flux cleaned = -0.00891284 Jy ! Component: 1650 - total flux cleaned = -0.00891206 Jy ! Component: 1700 - total flux cleaned = -0.00891146 Jy ! Component: 1750 - total flux cleaned = -0.00897696 Jy ! Component: 1800 - total flux cleaned = -0.00891024 Jy ! Component: 1850 - total flux cleaned = -0.00894261 Jy ! Component: 1900 - total flux cleaned = -0.00887842 Jy ! Component: 1950 - total flux cleaned = -0.00890964 Jy ! Component: 2000 - total flux cleaned = -0.00890947 Jy ! Component: 2050 - total flux cleaned = -0.00893978 Jy ! Component: 2100 - total flux cleaned = -0.00884886 Jy ! Component: 2150 - total flux cleaned = -0.0088788 Jy ! Component: 2200 - total flux cleaned = -0.008849 Jy ! Component: 2250 - total flux cleaned = -0.00884879 Jy ! Component: 2300 - total flux cleaned = -0.00879075 Jy ! Component: 2350 - total flux cleaned = -0.00879061 Jy ! Component: 2400 - total flux cleaned = -0.00873465 Jy ! Component: 2450 - total flux cleaned = -0.00879027 Jy ! Component: 2500 - total flux cleaned = -0.00881711 Jy ! Component: 2550 - total flux cleaned = -0.00889797 Jy ! Component: 2600 - total flux cleaned = -0.00884455 Jy ! Component: 2650 - total flux cleaned = -0.00892392 Jy ! Component: 2700 - total flux cleaned = -0.00887172 Jy ! Component: 2750 - total flux cleaned = -0.00897548 Jy ! Component: 2800 - total flux cleaned = -0.00900088 Jy ! Component: 2850 - total flux cleaned = -0.00902636 Jy ! Component: 2900 - total flux cleaned = -0.00897574 Jy ! Component: 2950 - total flux cleaned = -0.00902576 Jy ! Component: 3000 - total flux cleaned = -0.00909981 Jy ! Component: 3050 - total flux cleaned = -0.00919784 Jy ! Component: 3100 - total flux cleaned = -0.00910057 Jy ! Component: 3150 - total flux cleaned = -0.00914872 Jy ! Component: 3200 - total flux cleaned = -0.00914875 Jy ! Component: 3250 - total flux cleaned = -0.0092199 Jy ! Component: 3300 - total flux cleaned = -0.00922005 Jy ! Component: 3350 - total flux cleaned = -0.00924345 Jy ! Component: 3400 - total flux cleaned = -0.00928975 Jy ! Component: 3450 - total flux cleaned = -0.00933578 Jy ! Component: 3500 - total flux cleaned = -0.00938136 Jy ! Component: 3550 - total flux cleaned = -0.00942651 Jy ! Component: 3600 - total flux cleaned = -0.00944889 Jy ! Component: 3650 - total flux cleaned = -0.00953754 Jy ! Component: 3700 - total flux cleaned = -0.00951583 Jy ! Component: 3750 - total flux cleaned = -0.00960351 Jy ! Component: 3800 - total flux cleaned = -0.0096688 Jy ! Component: 3850 - total flux cleaned = -0.00977678 Jy ! Component: 3900 - total flux cleaned = -0.00994807 Jy ! Component: 3950 - total flux cleaned = -0.0100329 Jy ! Component: 4000 - total flux cleaned = -0.0101387 Jy ! Component: 4050 - total flux cleaned = -0.0102228 Jy ! Total flux subtracted in 4096 components = -0.010327 Jy ! Clean residual min=-0.001250 max=0.001140 Jy/beam ! Clean residual mean=-0.000031 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.747413 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 468 components and 0.747413 Jy ![Exited script file: muppet] wmap "J0710-3850_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.906 x 13.24 at 15.2 degrees (North through East) ! Clean map min=-0.0045536 max=0.52902 Jy/beam ! Writing clean map to FITS file: J0710-3850_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.529015 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000410945 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.233043 0.233043 0.466086 0.932173 1.86435 3.72869 7.45738 14.9148 29.8295 59.659 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.529 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.906 x 13.24 at 15.2 degrees (North through East) ! Clean map min=-0.0045536 max=0.52902 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0710-3850_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:07:58 2019